期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
基于Google Sketchup建模与PTV Vissim仿真构建3D交通环境 被引量:5
1
作者 李文栋 《城市道桥与防洪》 2012年第8期115-117,383,共3页
该文指出:3D交通是现代城市信息化发展的产物,越来越广泛地应用于城市交通规划、交通微观仿真之中。如何高效、快速地构建3D交通环境是进行交通微观仿真的关键技术和重要载体。基于Google Sketchup建模与Vissim仿真技术,操作简单,效率高... 该文指出:3D交通是现代城市信息化发展的产物,越来越广泛地应用于城市交通规划、交通微观仿真之中。如何高效、快速地构建3D交通环境是进行交通微观仿真的关键技术和重要载体。基于Google Sketchup建模与Vissim仿真技术,操作简单,效率高,大大降低了在构建3D交通环境工作中所花的时间和精力,从而降低工程成本,加快交通微观仿真技术的推广。 展开更多
关键词 Google SKETCHUP ptv vissim 建模 交通仿真 三维景观
下载PDF
Quantifying Operational Impacts of Variations in Work Zone Setups, Traffic Demand, and Traffic Composition: A Case Study
2
作者 A B M Tausif Ullah Chy Virginia P. Sisiopiku 《Journal of Transportation Technologies》 2023年第1期18-37,共20页
The presence of work zones due to pavement repair and rehabilitation is very common in highway facilities. Lane closures associated with work zones result in capacity reduction, which, in turn, often leads to increase... The presence of work zones due to pavement repair and rehabilitation is very common in highway facilities. Lane closures associated with work zones result in capacity reduction, which, in turn, often leads to increased congestion at such locations. This paper documents findings from a study that investigated the performance of freeway facilities in the presence of work zones under various Temporary Traffic Control (TTC) and lane closure scenarios while taking under consideration traffic composition and driving behaviors. The study site was an approximately 10-mile freeway segment of Interstate 65 (I-65) located in Birmingham, AL. The testbed was coded in PTV VISSIM, a microscopic simulation analysis platform, for: 1) baseline conditions (i.e., no work zone presence) and 2) work zone conditions with single lane closure (i.e., 3-to-2 lane closure). Work zone scenarios were coded for two TTC strategies, namely, early merge and late merge control and for three different positions of the lane closure (i.e., left, right, and center lane closures). The length of the work zones varied from 1000 to 2000, and 3000 ft. Sensitivity analysis was performed to document the operational impacts of varying heavy vehicle percentages, changes in drivers’ aggressiveness, and projected traffic demand changes. The impacts were quantified using linked-based measures of effectiveness (MOEs) such as travel time, and travel time index. The study results show that there is no significant change in travel time index due to the variation of work zone length across the study corridor. Under similar traffic control and demand conditions, a center lane closure consistently results in significantly higher travel time index than a left or right lane closure and should be avoided. Consideration of operational impacts of changes in truck percentage indicates that the corridor can absorb an increase in truck percentage from 10% to 15%, while performance rapidly deteriorates when a higher percentage of trucks is present in the traffic stream. The study findings can be used to guide transportation agencies in their future efforts to develop strategic lane closure plans that minimize congestion. 展开更多
关键词 Work Zone Placement Late Merge Control ptv vissim
下载PDF
基于倾斜航空摄影测量技术建立动态路网模型的交通仿真方法 被引量:5
3
作者 张国星 王海晓 李娅男 《科学技术与工程》 北大核心 2018年第33期215-223,共9页
提出了基于倾斜航空摄影测量技术,从实景测量中提取道路三维线形数据,将数据通过自编程序转化为仿真文件的新建模方法。选取坡道路段和交叉口分别作为路网建模仿真实验方案;采用对照实验法研究了道路线形、车型比、交通负荷等方面发生... 提出了基于倾斜航空摄影测量技术,从实景测量中提取道路三维线形数据,将数据通过自编程序转化为仿真文件的新建模方法。选取坡道路段和交叉口分别作为路网建模仿真实验方案;采用对照实验法研究了道路线形、车型比、交通负荷等方面发生变化时,新建模方法和传统路网建模方法在仿真结果上的差异。仿真结果表明:新模型中车流的速度和加减速的变化更符合真实行驶状态,可以减少静态数据误差对仿真结果的影响;新模型中车速与加减速度在不同交通流情况下对车道坡度变化更敏感,与实际交通状态的模拟精度及仿真参数的精准度更高。 展开更多
关键词 倾斜摄影测量 交通仿真 BENTLEY ORD ptv vissim
下载PDF
Application of Microscopic Simulation of Traffic Flows in Developing Evacuation Plans for Inhabitants
4
作者 Luka Novacko SadkoMandzuka Marjana Petrovie 《Journal of Civil Engineering and Architecture》 2014年第7期920-927,共8页
关键词 交通微观仿真 仿真工具 应用 流动 居民 vissim 突发事件 运输需求
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部