In this study, a series of flame-retardant polyisocyanurate-polyurethane (PIR-PUR) foams were prepared using various concentrations (0-25% by weight) of expandable graphite (EG) and dimethyl methyl phosphonate (DMMP) ...In this study, a series of flame-retardant polyisocyanurate-polyurethane (PIR-PUR) foams were prepared using various concentrations (0-25% by weight) of expandable graphite (EG) and dimethyl methyl phosphonate (DMMP) (0-7% by weight). The effect of these additives on the properties of the PIR-PUR foams, including physico-mechanical, morphological, flame retardancy, and thermal stability, was studied. Increasing amounts of EG in the PIR-PUR foam caused a significant drop in the compression strength. However, DMMP caused the mechanical properties of PIR-PUR foam to improve compared to foam filled with EG alone. The flame retardancy of PIR-PUR foams containing both EG and DMMP was enhanced significantly compared to EG filled foams. Thermogravimetric analysis (TGA) indicated that EG enhances the thermal stability of PIR-PUR foams but that DMMP decreased it. The morphology of the residual char provided conclusive evidence for the weak thermal stability of foams filled with DMMP.展开更多
Effect of tri（2-hydroxypropyl）, tri（2-hydroxybutyl）and tri（hydroxythiodiethylene） borates （BT2HB, BT2HP and BTHET） on the thermal and heat properties of the rigid polyurethane-polyisocyanurate （PUR-PIR） foam...Effect of tri（2-hydroxypropyl）, tri（2-hydroxybutyl）and tri（hydroxythiodiethylene） borates （BT2HB, BT2HP and BTHET） on the thermal and heat properties of the rigid polyurethane-polyisocyanurate （PUR-PIR） foams was investigated： Increasing amounts of BT2HB and BT2HP in the foam composition, from 0.05 to 0.4 of chemical equivalent, caused increases in the softening point, the temperature of the first mass loss, the extrapolated tempera- ture of the main mass loss foam and temperature of the highest rate of the mass loss. In the case when BTHTE was added to the foam compositions, the lower increase in the mentioned above characteristic temperatures was observed as compared to those of standard foam （without borate added）.展开更多
基金supported by the State Key Program of Coal Joint Funds of National Natural Science Foundation of China (No.51134020)the Natural Science Foundation of Shandong Province(No. ZR2011EL036)the High School Science & Technology Fund Planning Project of Shandong Province (No. JIILD53)
文摘In this study, a series of flame-retardant polyisocyanurate-polyurethane (PIR-PUR) foams were prepared using various concentrations (0-25% by weight) of expandable graphite (EG) and dimethyl methyl phosphonate (DMMP) (0-7% by weight). The effect of these additives on the properties of the PIR-PUR foams, including physico-mechanical, morphological, flame retardancy, and thermal stability, was studied. Increasing amounts of EG in the PIR-PUR foam caused a significant drop in the compression strength. However, DMMP caused the mechanical properties of PIR-PUR foam to improve compared to foam filled with EG alone. The flame retardancy of PIR-PUR foams containing both EG and DMMP was enhanced significantly compared to EG filled foams. Thermogravimetric analysis (TGA) indicated that EG enhances the thermal stability of PIR-PUR foams but that DMMP decreased it. The morphology of the residual char provided conclusive evidence for the weak thermal stability of foams filled with DMMP.
文摘Effect of tri（2-hydroxypropyl）, tri（2-hydroxybutyl）and tri（hydroxythiodiethylene） borates （BT2HB, BT2HP and BTHET） on the thermal and heat properties of the rigid polyurethane-polyisocyanurate （PUR-PIR） foams was investigated： Increasing amounts of BT2HB and BT2HP in the foam composition, from 0.05 to 0.4 of chemical equivalent, caused increases in the softening point, the temperature of the first mass loss, the extrapolated tempera- ture of the main mass loss foam and temperature of the highest rate of the mass loss. In the case when BTHTE was added to the foam compositions, the lower increase in the mentioned above characteristic temperatures was observed as compared to those of standard foam （without borate added）.
