The development of reliable and affordable all-solid-state sodium metal batteries(ASS-SMBs)requires suitable solid-state electrolytes with cost-efficient processing and stabilized electrode/electrolyte interfaces.Here...The development of reliable and affordable all-solid-state sodium metal batteries(ASS-SMBs)requires suitable solid-state electrolytes with cost-efficient processing and stabilized electrode/electrolyte interfaces.Here,an integrated porous/dense/porous Na_(5)YSi_(4)O_(12)(NYS)trilayered scaffold is designed and fabricated by tape casting using aqueous slurries.In this template-based NYS scaffold,the dense layer in the middle serves as a separator and the porous layers on both sides accommodate the active materials with their volume changes during the charge/discharge processes,increasing the contact area and thus enhancing the utilization rate and homogenizing the current distribution.The Na/NYS/Na symmetric cells with the Pb-coated NYS scaffold exhibit significantly reduced interfacial impedance and superior critical current density of up to 3.0 mA cm^(-2)against Na metal owing to enhanced wettability.Furthermore,the assembled Na/NYS/S full cells operated without external pressure at room temperature showed a high initial discharge capacity of 970 mAh g^(-1)and good cycling stability with a capacity of 600 mAh g^(-1)after 150 cycles(based on the mass of sulfur).This approach paves the way for the realization of economical and practical ASS-SMBs from the perspective of ceramic manufacturing.展开更多
A sol-gel method using lauric acid as surfactant was used to synthesize Li4Ti5O12 nanocrystals with an ultra-fine particle size distribution between 120 and 250 nm.In order to obtain the electrode materials with the b...A sol-gel method using lauric acid as surfactant was used to synthesize Li4Ti5O12 nanocrystals with an ultra-fine particle size distribution between 120 and 250 nm.In order to obtain the electrode materials with the best electrochemical performance,the content of lauric acid during Li4Ti5O12 synthesis was systematically studied.The physical and electrochemical properties of the synthesized samples were characterized by X-ray diffraction（XRD）,field emission scanning electron microscopy（FESEM）,transmission electron microscopy（TEM）,laser particle size analysis,alternating current impedance（AC） and galvanostatic charge-discharge experiments.The highly dispersed Li4Ti5O12 nanocrystals obtained at 800 ℃ for 10 h can deliver a specific capacity of 163.3 mA-h/g at 1C rate without obvious capacity fade up to 50 cycles.The results suggest that well dispersed Li4Ti5O12 nanocrystals shorten the Li-ion diffusion length and enhance the electrochemical kinetics of the samples,which are very crucial to high rate capability.展开更多
It is still a great challenge at present to combine the high rate capability of the electrochemical capacitor with the high electrochemical capacity feature of rechargeable battery in energy storage and transport devi...It is still a great challenge at present to combine the high rate capability of the electrochemical capacitor with the high electrochemical capacity feature of rechargeable battery in energy storage and transport devices. By studying the lithiation mechanism of Li_4Ti_5O_12 （LTO） using in-situ electron holography, we find that double charge layers are formed at the interface of the insulating Li_4Ti_5O_12 （Li_4） phase and the semiconducting Li_7Ti_5O_12 （Li_7） phase, and can greatly boost the lithiation kinetics. The electron wave phase of the LTO particle is found to gradually shrink with the interface movement, leaving a positive electric field from Li_7 to Li_4 phase. Once the capacitive interface charges are formed, the lithiation of the core/shell particle could be established within 10 s. The ultrafast kinetics is attributed to the built-in interface potential and the mixed Ti3＋/Ti4＋ sites at the interface that could be maximally lowering the thermodynamic barrier for Li ion migration.展开更多
Sodium-ion batteries are considered as promising alternatives to lithium-ion batteries,owing to their low cost and abundant raw materials.Among the several candidate materials for the anode,spinel-type Li_(4)Ti_(5)O_(...Sodium-ion batteries are considered as promising alternatives to lithium-ion batteries,owing to their low cost and abundant raw materials.Among the several candidate materials for the anode,spinel-type Li_(4)Ti_(5)O_(12)has potential owing to its superior safety originating from an appropriate operating voltage and the reversible Na^(+)intercalation properties.However,a low diffusion coefficient for Na^(+)and the insulating nature of LTO remains challenging for practical sodium-ion battery systems.Herein,we present a strategy for integrating physical and chemical approaches to achieve superior electrochemical properties in LTO.We demonstrate that carefully controlling the amount of Cr doping is crucial to enhance the electrochemical properties of nanostructured LTO.Optimized Cr doped LTO shows a superior reversible capacity of 110 m Ah g^(-1) after 400 cycles at 1 C,with a three-fold higher capacity(75 m Ah g^(-1))at 10 C compared with undoped LTO material.This suggests that appropriately Cr doped nanostructured LTO is a promising anode material for sodium-ion batteries.展开更多
It is the core to improve the electron/ion transfer features of Li_(4)Ti_(5)O_(12) for achieving high-rate anode in lithium ion batteries.By directly using graphite oxide powder,nano-Li_(4)Ti_(5)O_(12)/reduced graphit...It is the core to improve the electron/ion transfer features of Li_(4)Ti_(5)O_(12) for achieving high-rate anode in lithium ion batteries.By directly using graphite oxide powder,nano-Li_(4)Ti_(5)O_(12)/reduced graphite oxide composite with mesopore-oriented porosity is prepared through one-pot facile ball-milling method in this work.Synthesis mechanism underlying the self-nucleophilic effect of oxygen-containing functional groups in graphite oxide is substantiated.Reactants can intercalate into graphite oxide bulk and in-situ generate nanoparticles.Subsequently,graphite oxide with nanoparticles generated inside can obtain a mesopore-oriented porous structure under ball-milling.Furthermore,the synergistic effects of Li_(4)Ti_(5)O_(12) nanoparticles and mesopore-oriented porosity strengthen composites with rapid Li^(+)diffusion and electron conductive frameworks.The obtained optimal LTO/GO-1.75 composite displays excellent high-rate capability(136 mA·h/g at 7000 mA/g)and good cycling stability(a capacity retention of 72%after 1000 cycles at 7000 mA/g).Additionally,the reactants concentration in this demonstrated strategy is as high as 30 wt%−40 wt%,which is over 6 times that of traditional methods with GO suspensions.It means that the strategy can significantly increase the yield,showing big potential for large-scale production.展开更多
基金the China Scholarship Council(CSC,No.201906200023)the MatKat Foundation.Aikai Yang,whose CSC grant application is affiliated with Nankai University(Tianjin,China)the Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)at Nankai University.Partial financial support from the German Federal Ministry of Education and Research(BMBF)within the project“HeNa”(support code 13XP0390B)is also gratefully acknowledged.
文摘The development of reliable and affordable all-solid-state sodium metal batteries(ASS-SMBs)requires suitable solid-state electrolytes with cost-efficient processing and stabilized electrode/electrolyte interfaces.Here,an integrated porous/dense/porous Na_(5)YSi_(4)O_(12)(NYS)trilayered scaffold is designed and fabricated by tape casting using aqueous slurries.In this template-based NYS scaffold,the dense layer in the middle serves as a separator and the porous layers on both sides accommodate the active materials with their volume changes during the charge/discharge processes,increasing the contact area and thus enhancing the utilization rate and homogenizing the current distribution.The Na/NYS/Na symmetric cells with the Pb-coated NYS scaffold exhibit significantly reduced interfacial impedance and superior critical current density of up to 3.0 mA cm^(-2)against Na metal owing to enhanced wettability.Furthermore,the assembled Na/NYS/S full cells operated without external pressure at room temperature showed a high initial discharge capacity of 970 mAh g^(-1)and good cycling stability with a capacity of 600 mAh g^(-1)after 150 cycles(based on the mass of sulfur).This approach paves the way for the realization of economical and practical ASS-SMBs from the perspective of ceramic manufacturing.
基金Project(2007CB2097050)supported by the National Basic Research Program of ChinaProject(20803035)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),China
文摘A sol-gel method using lauric acid as surfactant was used to synthesize Li4Ti5O12 nanocrystals with an ultra-fine particle size distribution between 120 and 250 nm.In order to obtain the electrode materials with the best electrochemical performance,the content of lauric acid during Li4Ti5O12 synthesis was systematically studied.The physical and electrochemical properties of the synthesized samples were characterized by X-ray diffraction（XRD）,field emission scanning electron microscopy（FESEM）,transmission electron microscopy（TEM）,laser particle size analysis,alternating current impedance（AC） and galvanostatic charge-discharge experiments.The highly dispersed Li4Ti5O12 nanocrystals obtained at 800 ℃ for 10 h can deliver a specific capacity of 163.3 mA-h/g at 1C rate without obvious capacity fade up to 50 cycles.The results suggest that well dispersed Li4Ti5O12 nanocrystals shorten the Li-ion diffusion length and enhance the electrochemical kinetics of the samples,which are very crucial to high rate capability.
基金supported by the National Natural Science Foundation of China (Nos. 51501085, 11704019, 51522212 and 51421002)National Program on Key Basic Research Project (2014CB921002)the Strategic Priority Research Program of Chinese Academy of Sciences (No. XDB07030200)
文摘It is still a great challenge at present to combine the high rate capability of the electrochemical capacitor with the high electrochemical capacity feature of rechargeable battery in energy storage and transport devices. By studying the lithiation mechanism of Li_4Ti_5O_12 （LTO） using in-situ electron holography, we find that double charge layers are formed at the interface of the insulating Li_4Ti_5O_12 （Li_4） phase and the semiconducting Li_7Ti_5O_12 （Li_7） phase, and can greatly boost the lithiation kinetics. The electron wave phase of the LTO particle is found to gradually shrink with the interface movement, leaving a positive electric field from Li_7 to Li_4 phase. Once the capacitive interface charges are formed, the lithiation of the core/shell particle could be established within 10 s. The ultrafast kinetics is attributed to the built-in interface potential and the mixed Ti3＋/Ti4＋ sites at the interface that could be maximally lowering the thermodynamic barrier for Li ion migration.
基金supported by the Korea Institute of Science and Technology(KIST)Institutional Program(Project No.2E30212)the National Research Foundation of Korea(NRF)(NRF-2020M3H4A1A0308297811)。
文摘Sodium-ion batteries are considered as promising alternatives to lithium-ion batteries,owing to their low cost and abundant raw materials.Among the several candidate materials for the anode,spinel-type Li_(4)Ti_(5)O_(12)has potential owing to its superior safety originating from an appropriate operating voltage and the reversible Na^(+)intercalation properties.However,a low diffusion coefficient for Na^(+)and the insulating nature of LTO remains challenging for practical sodium-ion battery systems.Herein,we present a strategy for integrating physical and chemical approaches to achieve superior electrochemical properties in LTO.We demonstrate that carefully controlling the amount of Cr doping is crucial to enhance the electrochemical properties of nanostructured LTO.Optimized Cr doped LTO shows a superior reversible capacity of 110 m Ah g^(-1) after 400 cycles at 1 C,with a three-fold higher capacity(75 m Ah g^(-1))at 10 C compared with undoped LTO material.This suggests that appropriately Cr doped nanostructured LTO is a promising anode material for sodium-ion batteries.
基金Project(21875283) supported by the the National Natural Science Foundation of China。
文摘It is the core to improve the electron/ion transfer features of Li_(4)Ti_(5)O_(12) for achieving high-rate anode in lithium ion batteries.By directly using graphite oxide powder,nano-Li_(4)Ti_(5)O_(12)/reduced graphite oxide composite with mesopore-oriented porosity is prepared through one-pot facile ball-milling method in this work.Synthesis mechanism underlying the self-nucleophilic effect of oxygen-containing functional groups in graphite oxide is substantiated.Reactants can intercalate into graphite oxide bulk and in-situ generate nanoparticles.Subsequently,graphite oxide with nanoparticles generated inside can obtain a mesopore-oriented porous structure under ball-milling.Furthermore,the synergistic effects of Li_(4)Ti_(5)O_(12) nanoparticles and mesopore-oriented porosity strengthen composites with rapid Li^(+)diffusion and electron conductive frameworks.The obtained optimal LTO/GO-1.75 composite displays excellent high-rate capability(136 mA·h/g at 7000 mA/g)and good cycling stability(a capacity retention of 72%after 1000 cycles at 7000 mA/g).Additionally,the reactants concentration in this demonstrated strategy is as high as 30 wt%−40 wt%,which is over 6 times that of traditional methods with GO suspensions.It means that the strategy can significantly increase the yield,showing big potential for large-scale production.
