The problem of efficient gas lift for gas well annulus packers that rely on their own energy plungers is considered.The complex related gas-liquid problem is addressed in the frame of model where the gas inflow dynami...The problem of efficient gas lift for gas well annulus packers that rely on their own energy plungers is considered.The complex related gas-liquid problem is addressed in the frame of model where the gas inflow dynamics and liquid inflow dynamics of the considered shale gas wells are weakly coupled.On this basis,and with the aiding support of indoor simulation experimental data,a new gas plunger lift design taking into account liquid leakage is obtained.Finally,a dedicated software relying on this approach is developed and used to verify the reliability of the model by means of field examples.展开更多
During hydraulic fracturing operations of low-permeability reservoirs,packers are the key component to ensure the success of multistage fracturing.Packers enable sections of the wellbore to be sealed off and separatel...During hydraulic fracturing operations of low-permeability reservoirs,packers are the key component to ensure the success of multistage fracturing.Packers enable sections of the wellbore to be sealed off and separately fractured by hydraulic pressure,one at a time,while the remainder of the wellbore is not affected.However,reliable sealing properties of the packer rubber are required to meet the high-pressure and high-temperature(HPHT)conditions of reservoirs(such as 70 MPa and 170 ℃).In this study,the structures of the packer rubber with two different materials are optimized numerically by ABAQUS and validated by experiments.The optimization process starts from the packer rubber with a conventional structure,and then,the weakest spots are identified by ABAQUS and improved by slightly varying its structure.This process is iterative,and the final optimized structure of a single rubber barrel with expanding back-up rings is achieved.For the structure of three rubber barrels with metallic protective covers,both HNBR and AFLAS fail under HPHT conditions.For the final optimized structure,the packer rubber made of AFLAS can work better under HPHT than that made of HNBR which ruptures after setting.The results show that the optimized structure of a single rubber barrel with expanding back-up rings and the material AFLAS are a good combination for the packer rubber playing an excellent sealing performance in multistage fracturing in horizontal wells.展开更多
Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test ...Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.展开更多
Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in ...Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in according with the requirements of high water head pumped storage hydro-plant should be 1.2 times of the water head special high-pressure packer permeability test compared with normal to test the permeability of rock and rock cleavage pressure value. The test results on the choice of design options often play a decisive role. Based on the engineering practice, the authors studied the drillhole high-pressure packer permeability test in the pumped storage hydro-plant's underground powerhouse, by the analysis of test results, this article offers a demonstration of the deformation of rock fracture witch under building in the condition of high-pressure water head, it provides a more detailed engineering geological background.展开更多
Investigating and modeling fluid flow in fractured aquifers is a challenge. This study presents the results of a series of packer tests conducted in a fractured aquifer in Freiberg, Germany, where gneiss is the domina...Investigating and modeling fluid flow in fractured aquifers is a challenge. This study presents the results of a series of packer tests conducted in a fractured aquifer in Freiberg, Germany, where gneiss is the dominant rock type. Two methods were applied to acquire hydraulic properties from the packer tests: analytical and numerical modeling. MLU (Multi-Layer Unsteady state) for Windows is the analytical model that was applied. ANSYS-FLOTRAN was used to build a two-dimensional numerical model of the geometry of the layered aquifer. A reasonable match between experimental data and simulated data was achieved with the 2D numerical model while the solution from the analytical model revealed significant deviations with respect to direction.展开更多
基金The authors would also like to acknowledge the support provided by the National Natural Science Fund Project(62173049)Major National Projects(2016ZX05056004-002).
文摘The problem of efficient gas lift for gas well annulus packers that rely on their own energy plungers is considered.The complex related gas-liquid problem is addressed in the frame of model where the gas inflow dynamics and liquid inflow dynamics of the considered shale gas wells are weakly coupled.On this basis,and with the aiding support of indoor simulation experimental data,a new gas plunger lift design taking into account liquid leakage is obtained.Finally,a dedicated software relying on this approach is developed and used to verify the reliability of the model by means of field examples.
基金financial support from the Fundamental Research Funds for the Central Universities under Grant nos. 17CX05020 and 17CX06002the Research Funds for Introducing Talent (PhD) of China University of Petroleum under Grant no. YJ20170026+1 种基金the National Science and Technology Major Project under Grant no. 2016ZX05042004the Joint Funds of the National Natural Science Foundation of China under Grant no. U1762104
文摘During hydraulic fracturing operations of low-permeability reservoirs,packers are the key component to ensure the success of multistage fracturing.Packers enable sections of the wellbore to be sealed off and separately fractured by hydraulic pressure,one at a time,while the remainder of the wellbore is not affected.However,reliable sealing properties of the packer rubber are required to meet the high-pressure and high-temperature(HPHT)conditions of reservoirs(such as 70 MPa and 170 ℃).In this study,the structures of the packer rubber with two different materials are optimized numerically by ABAQUS and validated by experiments.The optimization process starts from the packer rubber with a conventional structure,and then,the weakest spots are identified by ABAQUS and improved by slightly varying its structure.This process is iterative,and the final optimized structure of a single rubber barrel with expanding back-up rings is achieved.For the structure of three rubber barrels with metallic protective covers,both HNBR and AFLAS fail under HPHT conditions.For the final optimized structure,the packer rubber made of AFLAS can work better under HPHT than that made of HNBR which ruptures after setting.The results show that the optimized structure of a single rubber barrel with expanding back-up rings and the material AFLAS are a good combination for the packer rubber playing an excellent sealing performance in multistage fracturing in horizontal wells.
文摘Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.
文摘Usually the water head of the pumped storage hydro-plant is high, generally up to 400-500 m, therefore the rock mass under the high-pressure bifurcation pipe have to bear as high as millions Pascal water pressure, in according with the requirements of high water head pumped storage hydro-plant should be 1.2 times of the water head special high-pressure packer permeability test compared with normal to test the permeability of rock and rock cleavage pressure value. The test results on the choice of design options often play a decisive role. Based on the engineering practice, the authors studied the drillhole high-pressure packer permeability test in the pumped storage hydro-plant's underground powerhouse, by the analysis of test results, this article offers a demonstration of the deformation of rock fracture witch under building in the condition of high-pressure water head, it provides a more detailed engineering geological background.
基金supported by the Department of Hydrogeology at TU Freiberg.
文摘Investigating and modeling fluid flow in fractured aquifers is a challenge. This study presents the results of a series of packer tests conducted in a fractured aquifer in Freiberg, Germany, where gneiss is the dominant rock type. Two methods were applied to acquire hydraulic properties from the packer tests: analytical and numerical modeling. MLU (Multi-Layer Unsteady state) for Windows is the analytical model that was applied. ANSYS-FLOTRAN was used to build a two-dimensional numerical model of the geometry of the layered aquifer. A reasonable match between experimental data and simulated data was achieved with the 2D numerical model while the solution from the analytical model revealed significant deviations with respect to direction.
