Study on Release Properties of Slow Release Urea Coated by Industrial Lignin

This study aimed to investigate the release properties of slow release ure- a coated by industrial lignin and the influences of temperature, pH and post-ripening period on the release of nutrients in coated urea. According to the experimental results, the release of nutrients in coated fertilizers showed an S-shaped curve; on the 28th d, the nutrient release rate reached 73.77%; the differential solubility was 1.83%, and the theoretical release period was 50.25 d. The release of nutrients was significantly influenced by temperature. As the incubation temperature rose from 25 to 40 ℃, preliminary solubility increased from 8.03% to 16.24%; differential solubility increased from 1.83% to 1.88%; theoretical release period was reduced from 51.25 d to 45.55 d. The release of nutrients was promoted by H＋ and OH-. After they were placed at room temperature within 30 d, coated fertilizers exhibited the optimal release properties.

Microstructure and properties of high emissivity coatings

A new coating on lining in industrial furnace for energy saving has been developed. Properties and microstructure of the coatings were revealed by emissivity instrument,X-ray diffraction （XRD）,transmission electron microscope （TEM） and scanning electron microscope （SEM）,respectively. The result indicates that the emissivity of coatings is higher than 0.90 and the thickness of coatings is about 200 μm. ZrO2,Cr2O3 and SiC in the coating benefit practical applications of coatings at high temperature with durable high emissivity and the continuous structure between the coatings and the substrate makes the coatings high cohesion and excellent adhesion for both specimens with and without sintering at high temperature. Result from laboratory experiment shows that the heating speed of specimen with coating is higher than that of controlled specimen and the temperature increases 30°C during the heating. The average temperature drop of specimen with coatings has a 13.5% improvement in the cooling speed. The application of coatings on the checker brick in a blast furnace of 1750m^3 indicates that the coating causes the blast temperature to an average increase of 28°C,reduces the fluctuation of blast temperature before the blowing-in and leads to a fuel saving of 10% approximately.

Synthesis of NiCr_2O_4 spinel coatings with high emissivity by plasma spraying

Air plasma spraying （APS） was used to produce high emissivity coatings with a NiCr204 spinel structure. The relationship between the emissivity and the crystal structure was investigated. X-ray diffraction （XRD） analyses show that NiCr204 spinel has been fabri- cated with the space group Fd3m. Scanning electron microscope （SEM） photographs show that the coating consists of a laminated structure with homogeneous grains and high porosity because of the unique feature of plasma spraying. The emissivity measurement and Fourier transformation infrared radiation （FT-IR） spectra show that NiCr204 has a high emissivity of about 0.91 because of its special spinel structure APS is a suitable method to produce high emissivity coatings.

Structure, properties and application to water-soluble coatings of complex antimicrobial agent Ag-carboxymethyl chitosan-thiabendazole

The structure, properties and application to water-soluble coatings of a new complex antimicrobial agent Ag-carboxylmethyl citosan-thiabendazole （Ag-CMCTS-TBZ） prepared from different materiel ratios were reported. The silver ions were preferably coordinated with the free-NH2 groups and the -OH groups of secondary alcohol and carboxyl in CMCTS. TBZ preferably bonded to carboxyl group in CMCTS by electrostatic force and hydrogen bonding. Increase in silver ions content in the complex agent improved to some limited extent the antibacterial activity, but enhanced coloring and cost of the complex agent. Increase in TBZ content resulted in increase of antifungal activity, but decrease of water solubility of the complex agent. The antimicrobial MICs of the complex agent to Esherichia coil, Staphylococcus aureus, Candida albicans, Aspergillus niger, Mucor sp. were 20 -80, 15 -60, 20 - 55, 40 - 250, and 400 - 1700 mg/kg, respectively. Addition of 0.1% of this complex agent to acrylic emulsion paint made the paint without substantial change in color, luster, viscosity, odor or pH value, but with an excellent and chronically persisting broad-spectra antimicrobial activity.

Measurements of Formaldehyde and TVOC Emission from Paints and Coating Materials using Small Chamber Method for Building Composites

An optimal test method for paint is proposed; additionally, the Field and Laboratory Emission Cell （FLEC） method used in Europe is applied as a substitute for the 20 L small chamber method. The emission factors of total volatile organic compounds （TVOC） and formaldehyde from oil-based paint, emulsion paint, and water-dispersion paint with a coating weight of 300 g/m2, cured for 24/48 hours, were measured using the 20 L small chamber method. The emission rate of TVOC and formaldehyde from all paints began to stabilize after approximately 7 days after 24/48 hours of curing even though Korean standards stipulate that paint should be measured and analyzed after the third day of application. The emission factor of TVOC and formaldehyde from oil-based, emulsion, and water-dispersion paints were also measured using the FLEC method. There was good correlation between the 20 L small chamber method and the FLEC method for oil-based, emulsion, and water-dispersion paint emissions. With the FLEC method, using paints prepared under identical conditions, the emission rate was stable 24 hours after installation of samples because the air flow rate of FLEC is much higher than that of a 20 L small chamber, and the relative cell volume of FLEC is much smaller than that of a 20 L small chamber.

Oxidation behavior of oxidation protective coatings for C/C-SiC composites at 1500 ℃

Porous carbon/carbon preforms were infiltrated with melted silicon to form C/C-SiC composites. Three-layer Si-Mo coating prepared by slurry painting and SiC/Si-Mo multilayer coating prepared by chemical vapor deposition(CVD) alternated with slurry painting were applied on C/C-SiC composites, respectively. The oxidation of three samples at 1 500 ℃ was compared. The results show that the C/C-SiC substrate is distorted quickly. Three-layer Si-Mo coating is out of service soon due to the formation of many bubbles on surface. The mass loss of coated sample is 0.76% after 1 h oxidation. The sample with SiC/Si-Mo multilayer coating gains mass even after 105 h oxidation. SiC/Si-Mo multilayer coating can provide longtime protection for C/C-SiC composites and has excellent thermal shock resistance. This is attributed to the combination of dense SiC layer and porous Si-Mo layer. Dense SiC layer plays the dual role of physical and chemical barrier, and resists the oxidation of porous Si-Mo layer. Porous Si-Mo layer improves the thermal shock resistance of the coating.

THE CURING THEORY OF SILlCONE PAINT AND THE STRUCTURE OF COATING FILM

This paper puts forward the two methods of weightlessness and alkoxyl group content determination to calculate the amount of cross-linking agent after elaborating the curing essence of silicone paint under the action of catalysis , and provides the theoretical basis of fixing the amoount of cross-linking agent accurately and quantitatively. At the same time, the structure of coating film is studied by the use of photoelectronic spectromenter and some other modern technology, and verified in theory. At last, this paper analyses the layer structure and the relationship between it and the coating properties.

Advancing Arts One village’s oil paintings lead the development of south China’s cultural industries

The Dafen art museum, the largest such museum in Shenzhen, was built int he village in 2007 to he a platform for art exhibitions and exchange,

Advancements and Prospects of Waterborne Coatings in the Coating Industry: A Comprehensive Analysis

This paper presents an overview of resins used in coatings,categorizing them into commonly used cross-linking agents such as methyl etherified melamine formaldehyde resin,and matrix resins including acrylic resin,polyurethane,epoxy resin,and alkyd resin.It further examines the demand and market size trends of these matrix resins in China over the recent seven years(2016-2022).The analysis reveals that in terms of both demand and market size,polyurethane resin ranks highest,followed by alkyd resin,acrylic resin,and epoxy resin.Additionally,the paper provides a comprehensive analysis of the development status,advantages,and macro-environment of the waterborne coatings industry.The competitive landscape within the industry is also discussed.The application of water-based coatings has shown significant potential to reduce the emission of pollutants such as volatile organic compounds(VOCs).Moreover,water-based coatings exhibit excellent performance characteristics.Market data from 2011 to the present indicates a consistent growth trend in the market size of waterborne coatings.However,intense competition among coating enterprises has led to a high level of product homogenization.In response to increasingly stringent national environmental protection policies,companies are accelerating the development and adoption of water-based coatings and other environmentally friendly products.This strategic shift towards waterborne coatings is expected to drive significant advancements and growth in the industry.

Improvement of anticorrosion and adhesion to magnesium alloy by phosphate coating formed at room temperature

A new surface protection process was developed to magnesium alloy against corrosion in aggressive environments.Firstly,a phosphate coating was formed on rinsed magnesium alloy.Then,powder painting was carried out on the phosphated magnesium alloy.Surface morphologies and phase compositions of the phosphate coating were investigated by X-ray diffraction(XRD) and scanning electron microscope(SEM) .The results show that the phosphate coatings formed in bath containing earth additives at room temperature have dense and fine microstructure.The phosphate coating provides excellent paint adhesion to the magnesium alloy. Salt spray tests indicate that the corrosion resistance of the phosphate coating plus paint could meet the demand of magnesium alloy automobile components in aggressive environments.

Influence of Painting and Dyeing on Temperature Fluctuation of Northern Tibetan Salt Brines

Introduction The amount of the total dissolved salts(TDS)in most of the salt brines on northern Tibet is relatively lower.So the effective brine concentration technique is needed for lithium,boron and potassium extraction from these brine

Coating Protection for Production Facilities of Offshore Oil Fields

This paper describes coating protection of production facilities of offshore oil fields based on the practice of development of Bohai Offshore Oil Field, with focus laid on the selection of coating systems, surface preparation, coating application, as well as coating inspection for four types of major production facilities.

Recent Developments of Image Based Measurement Methods for Application to Transonic Flows in Industrial Wind Tunnels

The experimental investigation of unsteady complex flow fields in wind tunnels requires advanced measurement techniques. The most important of such image based measurement techniques are those for the measurement of planar flow velocity fields, planar pressure distribution, model location and deformation, model temperature and quantitative high speed flow visualization. The applications as carried out by DLR range from low speed flows to transonic flows, from high lift configurations to propellers and rotors, from wake vortex investigations in catapult facilities and water towing tanks to investigations of vortex break down phenomena on delta wings. The capability to use image based measurement techniques in transonic flows requires dedicated technical developments and experienced scientists due to the special environment of a transonic wind tunnel. In this paper an overview of the state-of-the art of the application of image based measurement techniques in transonic flows as performed by DLR＇s Institute of Aerodynamics and Flow Technology will be given.

Removal of organic solvent from cathodic electrophoretic emulsion paint by vacuum steam stripping

The production of environmental friendly emulsion paint is of great significance. Vacuum steam stripping of methyl isobutyl ketone （MIBK） and methyl ethyl ketone （MEK） from cathodic electrophoretic emulsion was studied. The effects of mass ratio of vapor to feed （V/F）, vacuum degree and feed temperature on removal rate of MIBK and MEK, emulsion size and solid volume fraction of the emulsion were investigated, and the removal of MIBK and MEK from cathodic electrophoretic emulsion by vacuum desorption was also studied. The results show that removal rates of both MIBK and MEK increase with the increase of V/F, vacuum degree and feed temperature. Removal rates of MIBK and MEK are 98.3% and 93.6%, respectively, at the operating condition V/F of 0.7, feed temperature of 27℃ and vacuum degree of 90 kPa. The emulsion size of cathodic electrophoretic emulsion increases slightly with feed temperature when temperature is below 42 ℃, and increases rapidly with feed temperature when temperature is above 42℃. Solid volume fraction increases by 10% as vacuum degree increases from 0 to 90 kPa at V/F of 0.7 and feed temperature of 27 ℃. Compared with vacuum desorption, vacuum steam stripping can get a higher removal rate of MIBK and MEK under the same feed flow, vacuum degree and feed temperature.

Optimising the corrosion performance of pre-painted steels

Pre-painted steel is one of the most important structural material of the 20th century well known for its excellent corrosion resistance and wide ranging applications.A typical pre-painted steel usually consists of a layer of metal coating system,preferably zinc or zinc alloy coating and a combination of layers of inorganic - organic coatings usually referred to as paint system.The corrosion resistance of the metal coating as well as the paint system may vary considerably based on their composition and the environment.For optimal corrosion performance of pre-painted steel,a judicious selection of both metal and inorganic-organic coating systems are essential.This paper reviews different types of possible corrosion issues in pre-painted steels and methods to optimise their performance.

漆雾残渣对海洋平台大气区涂层体系防腐性能影响实验室研究

漆雾残渣是海洋平台涂装过程中一种不可避免的缺陷,按照现行验收标准,需人工手动打磨去除涂装过程中涂层表面附着的漆雾残渣;这一环节不但投入大量额外人力且对项目工期挑战极大。该文研究了漆雾残渣对两种海洋平台大气区常用配套防腐体系防腐性能的影响,通过对防腐体系的附着力、耐盐雾、冷凝试验等测试,得出结论:在涂膜外观无缺陷的情况下,漆雾残渣对大气区配套防腐体系的性能不利影响较小,可在涂装过程中适当简化打磨环节。

江苏省典型喷涂行业涂料替代与末端治理挥发性有机物减排效益评估

清洁涂料替代与末端治理是工业喷涂行业挥发性有机物(VOCs)减排的重要途径。基于江苏省典型喷涂行业研究评估了涂料替代与末端治理的VOCs减排效果。结果显示,水性涂料替代溶剂型涂料,涂料中VOCs含量可以大大降低,而且臭氧生成贡献大的芳香烃也会大大减少。末端治理设施对非甲烷总烃(NMHC)的治理效率平均可以达到60.2%,活性炭吸附是当前应用最广的技术,但燃烧才是治理效率高、芳香烃去除效果好的未来应推广技术。总体而言,水性涂料替代溶剂型涂料VOCs减排效果显著,VOCs末端治理设施应进一步推广,并逐步用燃烧技术代替活性炭吸附技术。

湿热盐雾大气环境印制电路板防护棚下试验研究

目的 试验研究不同防护工艺的印制电路板在湿热盐雾大气环境下的适应性。方法 结合无防护试件,在严苛的濒海棚下环境开展4种印制电路板防护工艺的暴露试验,通过观察电路板外观,测量计算绝缘电阻、介质耐压、品质因数,以及扫描电镜、能谱分析等技术手段评价印制电路板防护工艺的性能。结果 濒海棚下环境中,无防护印制电路板腐蚀严重,电气性能显著下降。改性硅、有机硅三防漆防护的印制电路板在整个试验周期内腐蚀程度轻微,电气性能较好,表面涂层仅存在轻微起泡现象。丙烯酸三防漆防护印制电路板防护性能不稳定,印制电路板出现腐蚀现象,品质因数总体低于改性硅、有机硅三防漆防护。聚氨酯三防漆防护印制电路板在电气测试性能中表现良好,但涂层出现太多破损、起泡等缺陷,铜导线出现异常生锈现象。在介质耐压测试中,多周期呈现击穿状态。结论 在濒海区域棚下湿热盐雾环境中,涂覆有机硅、改性硅三防漆的印制电路板防护状态最好,可优先选择作为防护手段。

2024年全球涂料行业运行展望及对中国涂料行业的影响分析

综述了全球经济概况、全球通胀和贸易对于涂料行业的影响,国际涂料行业整体动态。阐述了涂料行业营收增长因素、新兴国家GDP增长推动涂料人均消费增长概况,着重分析了建筑装饰涂料、原厂涂料、特种与防护涂料等重点涂料细分领域发展趋势。并从全球经济发展重要驱动方向对全球涂料工业未来发展进行了展望。

2024年一季度中国涂料、颜料行业经济运行简析

简析了2024年第一季度我国涂料行业生产、经营和涂料、无机颜料行业进出口简况,并对丙烯酸乳液、环氧树脂等重点成膜物质市场进行了综述和预测。对2024年一季度涂料行业双指数进行了分析,并对二季度市场进行了预测。