Age and geochemical evolution of granite magmatism in Olkhon region from Caledonian syncollisional ore-free granite to the rare metal granite and pegmatite of Middle Paleozoic intraplate setting

The detailed description of two granite complexes in the Olkhon subterrane is given.The Early Paleozoic Sharanur complex was formed by granitization of gneisses of the Olkhon series.It includes migmatites,granite-gneisses,granites and pegmatites of normal alkalinity;they belong to the type of syncollisional granites.The Middle Paleozoic Aya granite complex includes mother Aya massif of amazonite-bearing granites and several types of rare-metal pegmatites.They have elevated alkalinity,low of Ba,Sr,and high LILE and HFSE elements contents.The Aya pegmatites lie in northwest cracks of stretching and associated with the rise of the territory under the influence of the North Asian plume.These cracks and pegmatites mark the beginning of a new intraplate geodynamic setting.Two geochemical types are distinguished among the pegmatites of this complex.These are amazonite pegmatites of Li-F type with Ta mineralization and complex type pegmatite with Be-Rb-Nb-Ta and Li-F mineralization(the Ilixin vein).The Tashkiney pegmatite vein is similar to Ilixin,but lies in the gneisses of the Olkhon series.It shows high concentrations of Be,Nb,Ta,as well as W,Sn,but lacks Li and F,due to a greater depth and higher temperature of the melt crystallization of this pegmatite.

Upper Paleozoic total petroleum system and geological model of natural gas enrichment in Ordos Basin, NW China

Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is determined. Then, taking the Carboniferous Benxi Formation and the Permian Taiyuan Formation and Shanxi Formation as examples, the main controlling factors of gas accumulation and enrichment are discussed, and the gas enrichment models of total petroleum system are established. The results show that the source rocks, faults and tight reservoirs and their mutual coupling relations control the distribution and enrichment of gas. Specifically, the distribution and hydrocarbon generation capacity of source rocks control the enrichment degree and distribution range of retained shale gas and tight gas in the source. The coupling between the hydrocarbon generation capacity of source rocks and the physical properties of tight reservoirs controls the distribution and sweet spot development of near-source tight gas in the basin center. The far-source tight gas in the basin margin is mainly controlled by the distribution of faults, and the distribution of inner-source, near-source and far-source gas is adjusted and reformed by faults. Generally, the Upper Paleozoic gas in the Ordos Basin is recognized in four enrichment models: inner-source coalbed gas and shale gas, inner-source tight sandstone gas, near-source tight gas, and far-source fault-transported gas. In the Ordos Basin, inner-source tight gas and near-source tight gas are the current focuses of exploration, and inner-source coalbed gas and shale gas and far-source gas will be important potential targets in the future.

Paleozoic Tectonic Switch in the North Qinling Orogenic Belt:Constraints from the Paleozoic Granites from the Northern Qinling Migmatite Terrane

The variations in source rocks and melting conditions of granites can provide essential clues for the crustal magmatic response in orogenic process.Based on geochronology,whole-rock and mineral chemistry,this paper reveals two different granites in the Northern Qinling migmatite complex,which reveal obvious differences in source region and melting condition.The older granodiorite(402±0.8 Ma)displays typical Na-rich adakite affinity,i.e.,high Na_(2)O/K_(2)O(2.04 to 2.64)and Sr/Y(96 to 117)ratios,they have relative evolved isotopic compositions(ε_(Nd)(t)=-0.52 to-0.04;zirconε_(Hf)(t)=-0.06 to+7.78).The younger leucogranite(371±2 Ma)displays higher SiO_(2)(72.32 to 73.45 wt%),lower(TFeO+MgO+CaO+TiO_(2))contents(<2 wt%)and depleted Sr-Nd-Hf isotopic compositions(i.e.,ε_(Nd)(t)=+2.6 to+3.0;zirconε_(Hf)(t)=+5.94 to+14.12),as well as high 10000×Ga/Al and TFe O/Mg O ratios,indicating that they represent highly fractionated I-type granites that derived from melting of juvenile crust.The variations in source rocks and melting condition of the two granites indicating a tectonic switch from compression to extension in 400 to 370 Ma,this switch is later than that in the eastern section of the North Qinling,indicating a scissor collision process between the South Qinling and North China Craton(NCC)in Devonian era.

Geochronology,Petrogenesis and Tectonic Setting of the Late Jurassic I-type Granites in the North Qinling Orogenic Belt,Central China

The North Qinling Orogenic Belt(NQOB)is a composite orogenic belt in central China.It started evolving during the Meso-Neoproterozoic period and underwent multiple stages of plate subduction and collision before entering intra-continental orogeny in the Late Triassic.The Meso-Cenozoic intra-continental orogeny and tectonic evolution had different responses in various terranes of the belt,with the tectonic evolution of the middle part of the belt being particularly controversial.The granites distributed in the Dayu and Kuyu areas in the middle part of the NQOB can provide an important window for revealing the geodynamic mechanisms of the NQOB.The main lithology of Dayu and Kuyu granites is biotite monzogranite,and the zircon U-Pb dating yielded intrusive ages of 151.3±3.4 Ma and 147.7±1.5 Ma,respectively.The dates suggest that the biotite monzogranite were formed at the end of the Late Jurassic.The whole-rock geochemistry analysis shows that the granites in the study areas are characterized by slightly high SiO_(2)(64.50-68.88 wt%)and high Al_(2)O_(3)(15.12-16.24 wt%)and Na_(2)O(3.55-3.80 wt%)contents.They are also enriched in light rare earth elements,large ion lithophile elements(e.g.,Ba,K,La,Pb and Sr),and depleted in high field strength elements(HFSEs)(e.g.,Ta,Nb,P and Ti).Additionally,the granites have weakly negative-slightly positive Eu anomalies(δEu=0.91-1.19).Zircon Lu-Hf isotopic analysis showedε_(Hf)(t)=-6.1--3.8,and the two-stage model age is T_(2DM(crust))=1.5-1.6 Ga.The granites in the study areas are analyzed as weak peraluminous high-K calc-alkaline I-type granites.They formed by partial melting of the thickened ancient lower crust,accompanied by the addition of minor mantle-derived materials.During magma ascent,they experienced fractional crystallization,with residual garnet and amphibole for a certain proportion in the magma source region.Comprehensive the geotectonic data suggest that the end of the Late Jurassic granite magmatism in the Dayu and Kuyu areas represents a compression-extension transition regime.It may have been a response to multiple tectonic mechanisms,such as the late Mesozoic intra-continental southward subduction of the North China Craton and the remote effect of the Paleo-Pacific Plate subduction.

Late Jurassic Volcanism Deduced from Geochemical,Geochronological,and Sr-Nd-Hf Isotopic Composition Characteristics of the Nanyuan Formation,South China

The Nanyuan Formation contains information related to the Mesozoic tectonic transformation.In this study,three representative profiles were surveyed from the Nanyuan Formation,and multiple analyses were conducted.Zircon U-Pb dating yielded their ages as approximately 158–146 Ma.The volcanic rocks are enriched in Rb,Th,U,K,and Pb and depleted in Nb,Ta,P,and Ti,implying their affinity for I-type granites.TheεNd(t)values(-8.3 to-6.0),^(87)Sr/^(86)Sr)i values(0.7077–0.7094)of the volcanic rock,andεHf(t)values(-8.71 to 0.12)of the Mesozoic zircons suggest that the Nanyuan Formation magma originated in the lower crust with the involvement of depleted mantle materials.The parent rocks of the rhyolitic and dacitic volcanic rocks formed by partial melting of basement rocks in South China and the andesitic volcanic rocks were derived from partial melting of the metasomatites generated by slab-mantle interaction.The fractional crystallization also played an important role in later stage.Discrimination diagrams of the volcanic rocks indicated that they formed in a volcanic arc environment.Combined with previous data,the Nanyuan Formation recorded subduction of the Paleo-Pacific Plate before regional tectonic transformation.The compressive stress field endured until the end of the Late Jurassic.

Geochronology,Eruption Sequence and Geochemistry of Mid-Late Jurassic Volcanics South of Manzhouli:Petrogenesis and Implications for Mesozoic Tectonic Regime Transformation

To the south of Manzhouli,Hulunbuir,Inner Mongolia,experienced a tectonic regime transformation from compression to extension in the mid-Mesozoic.Based on systematic research of the volcanics,petrology,volcanic facies,chronology and geochemistry of rocks in the Buridun area,two stages of volcanics are identified.The first stage named the trachyte series was formed in the late Middle Jurassic(167-163 Ma),its eruption rhythm is pyroxene trachyandesite-trachyandesite-trachyte,and its origin rock is basic volcanics from thickened lower crust,with a tectonic setting in the collision orogeny after the closure of the Mongolia Okhotsk Ocean(MOO).The second stage is a bimodal volcanic rock,formed in the early Late Jurassic(163-160 Ma).The eruption rhythm of basic volcanics in this stage is basaltic andesite-basalt-olivine basalt,which comes from the metasomatized lithospheric mantle,the acidic volcanics of which being characterized by the eruption rhythm of sedimentary-explosive-overflow facies,which came from the partial melting of newly formed lower crust,and this shows the characteristics of A-type granite;the tectonic setting is extension of the lithosphere after collision and closure of the MOO.The changes in the formation age and tectonic setting of the two stages of volcanics demonstrate that the transition time from the compressive system to the extensional system south of Manzhouli is about 163 Ma.

Geochemical characteristics of temperature and pressure of Paleozoic reservoir fluid inclusions in Xuanjing region, Lower Yangtze area

In order to understand the geochemical characteristics of Paleozoic reservoir fluids in Xuanjing region,Lower Yangtze area,drilling core samples from Y and D wells were tested and analyzed to study the fluid inclusion types and composition.Pressure correction was undertaken to determine the temperature and pressure environment for inclusion formation,and the influence of fluid characteristics of the Upper Permian and Lower Triassic reservoirs on the preservation of shale gas was investigated.According to petrograph-ic observations,fluid inclusions are mainly brine and bitumen inclusions.Bitumen inclusions are mainly distributed in holes and fractures,and with smaller individuals.No visible fluorescence was observed,and the vitrinite reflectance is 3.39%–3.92%.This indicates that there had been oil and gas accumulation in the early stage of diagenesis in the study area,but due to the influence of magmatic hydrothermal solution,oil and gas underwent thermal metamorphism in the early stage,making liquid petroleum into solid bitumen.At present,oil and gas in the reservoir were largely formed in the late stage.During the continuous process in which shale was buried,light oil and gas were generated.Light oil and gas underwent magmatic and tectonic hydrothermal processes in some areas,resulting in high-temperature metamorphic cracking that formed dry gas.Moreover,nitrogen inclusions are found in fluid inclusions,forming metamorphic fluids caused by mag-matic hydrothermal activities.The study shows that Paleozoic reservoirs in Xuanjing area are characterized by self-generation and self-storage.Furthermore,the mechanism of shale gas accumulation is not only related to the buried hydrocarbon generation process of shale itself,but is also related to later magmatic activity and tectonic hydrothermal transformation.Therefore,preservation conditions are generally key factors of shale gas accumulation in this area.

Determination of the early Paleozoic accretionary complex in Southwestern Yunnan, China: Implications for the tectonic evolution of the Proto-Tethys Ocean

Accretionary complex study provides important knowledge on the subduction and the geodynamic processes of the oceanic plate,which represents the ancient ocean basin extinction location.Nevertheless,there exist many disputes on the age,material source,and tectonic attribute of the Lancang Group,located in Southwest Yunnan,China.In this paper,the LA-ICP-MS detrital zircon U‒Pb chronology of nine metamorphic rocks in the Lancang Group was carried out.The U‒Pb ages of the three detrital zircons mainly range from 590-550 Ma,980-910 Ma,and 1150-1490 Ma,with the youngest detrital zircons having a peak age of about 560 Ma.The U‒Pb ages of the six detrital zircons mainly range from 440-460 Ma and 980-910 Ma,and the youngest detrital zircon has a peak age of about 445 Ma.In the Lancang Group,metamorphic acidic volcanic rocks,basic volcanic rocks,intermediate-acid intrusive rocks,and high-pressure metamorphic rocks are exposed in the form of tectonic lens in schist,rendering typical melange structural characteristics of“block+matrix”.Considering regional deformation and chronology,material composition characteristics,and the previous data,this study thinks the Lancang Group may be an early Paleozoic tectonic accretionary complex formed by the eastward subduction of the Changning-Menglian Proto-Tethys Ocean,which provides an important constraint for the Tethys evolution.

Characteristics and discovery significance of the Upper Triassic–Lower Jurassic marine shale oil in Qiangtang Basin,China

Mesozoic marine shale oil was found in the Qiangtang Basin by a large number of hydrocarbon geological surveys and shallow drilling sampling.Based on systematic observation and experimental analysis of outcrop and core samples,the deposition and development conditions and characteristics of marine shale are revealed,the geochemical and reservoir characteristics of marine shale are evaluated,and the layers of marine shale oil in the Mesozoic are determined.The following geological understandings are obtained.First,there are two sets of marine organic-rich shales,the Lower Jurassic Quse Formation and the Upper Triassic Bagong Formation,in the Qiangtang Basin.They are mainly composed of laminated shale with massive mudstone.The laminated organic-rich shale of the Quse Formation is located in the lower part of the stratum,with a thickness of 50–75 m,and mainly distributed in southern Qiangtang Basin and the central-west of northern Qiangtang Basin.The laminated organic-rich shale of the Bagong Formation is located in the middle of the stratum,with a thickness of 250–350 m,and distributed in both northern and southern Qiangtang Basin.Second,the two sets of laminated organic-rich shales develop foliation,and various types of micropores and microfractures.The average content of brittle minerals is 70%,implying a high fracturability.The average porosity is 5.89%,indicating good reservoir physical properties to the level of moderate–good shale oil reservoirs.Third,the organic-rich shale of the Quse Formation contains organic matters of types II1 and II2,with the average TOC of 8.34%,the average content of chloroform bitumen'A'of 0.66%,the average residual hydrocarbon generation potential(S1+S2)of 29.93 mg/g,and the Ro value of 0.9%–1.3%,meeting the standard of high-quality source rock.The organic-rich shale of the Bagong Formation contains mixed organic matters,with the TOC of 0.65%–3.10%and the Ro value of 1.17%–1.59%,meeting the standard of moderate source rock.Fourth,four shallow wells(depth of 50–250 m)with oil shows have been found in the organic shales at 50–90 m in the lower part of the Bagong Formation and 30–75 m in the middle part of the Quse Formation.The crude oil contains a high content of saturated hydrocarbon.Analysis and testing of outcrop and shallow well samples confirm the presence of marine shale oil in the Bagong Formation and the Quse Formation.Good shale oil intervals in the Bagong Formation are observed in layers 18–20 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 206.7 m thick,with the maximum and average(S0+S1)of 1.92 mg/g and 1.81 mg/g,respectively.Good shale oil intervals in the Quse Formation are found in layers 4–8 in the lower part of the section,where the shales with(S0+S1)higher than 1 mg/g are 58.8 m thick,with the maximum and average(S0+S1)of 6.46 mg/g and 2.23 mg/g,respectively.

Identification and evaluation of fault-fracture reservoirs in buried hills of the Lower Paleozoic, Chengdao area, China

The Bohai Bay Basin is a Meso-Cenozoic rifted basin where the Paleozoic buried hills with great hydrocarbon potentials are well developed. The reservoir space types are complex and diverse due to tectonic activities, making fracture distribution highly heterogeneous. Reservoir identification and mapping is challenging due to their large burial depth and poor resolution of seismic data. An integration of well-logging, seismic data interpretation and core observation is applied to identify three structural unit types in the study area, that is, fault breccia zone, fault cataclastic zone, and fault massive rock zone. A comprehensive well-logging identification template and a comprehensive discriminant function M for the reservoir are established based on the well-logging response characteristics. A M value greater than 0.12 indicates a fault breccia zone, that between 0.04 and 0.12 marks a fault cataclastic zone, and that in the range from 0.02 to 0.04 represents a fault massive rock zone. A seismic prediction method with multi-parameter fusion is proposed in the study. The large-scale fractures are mapped by coherence-clutter parameters, while small fractures are predicted via waveform indication inversion. The spatial distribution of “fault-fracture reservoirs” is precisely mapped by frequency fusion technology. It is found that the fault breccia zones usually occur close to the fault planes, while the fault cataclastic zones are slightly away from the fault planes. The hydrocarbon abundance of the breccia zones is greater than that of the fault cataclastic and fault massive rock zones.

Reservoir characteristics of Datta Formation (Early Jurassic), Marwat-Khisor Ranges, sub-Himalayas, Pakistan

The present work has been accomplished to carry out a detailed study of the characteristics of the Early Jurassic Datta Formation of Trans-Indus Ranges, Pakistan. The discovery of Saib well-1 (Gas and condensate discovery from Jurassic limestone) in the study basin takes an active interest in carrying out extensive exploration activities in the same basin. Jurassic rocks especially Datta Sandstone and Samana Suk Limestone are acting as good reservoirs. The study unit consists of variegated sandstone interbedded with siltstone, carbonaceous clay, and shale and coal stringer. For the current work, two stratigraphic sections (Pezu and Abbo Wanda) have been measured. To examine its sedimentology, depositional environment, diagenetic settings, and reservoir characteristics, a detailed study was conducted and various laboratory techniques have been utilized. About 95 rock samples from the bottom to the top of both sections were collected, and 50 rock samples have been selected for thin section analysis and were examined under a polarizing microscope to show their mineralogical composition, diagenesis, and their reservoir characteristics. XRD (X-ray diffraction), Cathodoluminescence (CL), SEM (Scanning electron microscope) with EDS (Energy-dispersive spectroscope), and Core plug porosity and permeability analysis have been used to interpret its chemical and mineralogical composition and its reservoir characteristics, respectively. Based on field observations and thin section analysis, four depositional facies and six lithofacies have been established. The sedimentary structures, depositional facies, and lithofacies indicate that Datta Formation was deposited in a deltaic environment. Compactions, cementation, fracturing and dissolution can greatly affect the quality of reservoir rock. Based on thin section and SEM analysis, large numbers of primary pores, fracture and secondary pores were observed and connectivity between the pores is good, and at some places, these pores were filled through the authigenic clay minerals like kaolinite, mixed layers illite/smectite and chlorite that influences the reservoir characteristics. Primary pores (thin section) and secondary pores (dissolution pores) and core plug porosity and permeability data (porosity 13.23%-26.89% and permeability 0.12 to 149 mD) shows that Datta Formation has a good reservoir quality.

Crustal Structure of the Jurassic Quiet Zone in the West Pacific Ocean:Insights from 2D Multichannel Seismic Reflection Profiles

The Jurassic oceanic crust is the oldest existing oceanic crust on earth,and although distributed sparsely,carries essential information about the earth's evolution.The area around the Pigafetta Basin in the west Pacific Ocean(also known as the Jurassic Quiet Zone,JQZ)is one of a few areas where the Jurassic oceanic crust is present.This study takes full advantage of high-resolution multichannel seismic reflection profiles in combination with bathymetry,magnetic,and gravity data from the JQZ to examine the structure,deformation,and morphology of the Jurassic oceanic crust.Our results show the following insights:1)The Moho lies at 2–3 s in two-way travel time beneath the seafloor with the segmented feature.The gaps between the Moho segments well correspond to the seamounts on the seafloor,suggesting the upward migration of magma from the mantle has interrupted the pre-existing Moho.2)The oceanic crust is predominantly deformed by crustal-scale thrust faults,normal faults cutting through the top of basement,and vertical seismic disturbance zones in association with migration of thermal fluids.The thrust faults are locally found and interpreted as the results of tectonic inversion.3)Seafloor morphology in the JQZ is characterized by fault scarps,fold scarps,seamounts,and small hills,indicating the occurrence of active faults.4)The oceanic crust in the JQZ and East Pacific Rise has many structural and geometrical variations,such as the thickness of sediments,seafloor topography,basement morphology,fault size and type.

Petroleum in the Jurassic Reservoirs within the Eastern Fukang Sub-depression,Junggar Basin,NW China:Correlation and Source Rock

The origin and source of the petroleum in the Jurassic reservoirs within the eastern Fukang sub-depression were geochemically investigated.They show thermal maturities matching the peak generation stage,while the condensates are at the early stage of intense cracking.Oils and condensates may have experienced mild evaporative fractionation,while mixing of severely biodegraded with non-biodegraded oils has occurred.Using biomarkers and isotopes,petroleums were classified into GroupⅠ,ⅡandⅢgenetic groups,with GroupⅢfurther divided intoⅢa andⅢb subgroups.GroupⅠpetroleum displays heavy carbon isotopes,a strong predominance of pristine over phytane,high C_(19)and C_(20)tricyclic and C_(24)tetracyclic terpanes,low gammacerane,and dominant C_(29)steranes,while GroupⅡshows light carbon isotopes,a predominance of phytane over pristine,high C_(21)and C_(23)tricyclic with low C_(24)tetracyclic terpanes,high gammacerane and dominant C_(27)steranes.GroupⅢa petroleum shows mixing compositions of GroupⅠandⅡ,while GroupⅢb displays similar compositions to Group I,but with significantly higher Ts,C_(29)Ts and C_(30)diahopane proportions.Oil-source rock correlation suggests GroupⅠandⅡpetroleums originate from Jurassic and Permian source rocks,respectively,while GroupⅢa are mixtures sourced from these rocks andⅢb are mixtures from Jurassic and Triassic source rocks.

Petroleum Generation Kinetics and Geological Implications for Jurassic Hydrocarbon Source Rocks,Hongqi Depression,Hailar Basin,Northeast China

A sample from the Jurassic Tamulangou Fm.and two comparison samples from the Cretaceous Fm.were used to document the hydrocarbon generation kinetics and phase behaviors at two heating rates using the confined gold tube system.The results show that the different heating rates affect the reaction rates,paths and levels of organic matter evolution.The average activation energy and dominant frequency activation energy of liquid hydrocarbon are significantly lower than those of gaseous.Moreover,igneous intrusion had a positive effect on the blooming,enrichment and preservation of organic matter,promoting a Ro increase of 0.09%–1.07%in the Jurassic Tamulangou Fm.Two models were used to simulate the normal and abnormal evolution caused by thermal events combined hydrocarbon generation kinetic parameters.Thermal simulation analysis shows that oil generation was initially slow and then increased rapidly until a burial depth of 1500 m was reached at~128 Ma.The largest hydrocarbon expulsion began at~120 Ma,corresponding to a burial depth of 2450 m.The maximum cumulative yield is 510 mg/g TOC,and it is still in the peak period of hydrocarbon generation,which demonstrates a favorable potential for hydrocarbon exploration.

Action mechanisms of abnormal fluid pressure on physical properties of deep reservoirs: A case study on Jurassic Toutunhe Formation in the southern margin of Junggar Basin, NW China

Considering the action mechanisms of overpressure on physical changes in skeleton particles of deep reservoir rocks and the differences in physical changes of skeleton particles under overpressure and hydrostatic pressure, the sandstone of the Jurassic Toutunhe Formation in the southern margin of Junggar Basin was taken as an example for physical modeling experiment to analyze the action mechanisms of overpressure on the physical properties of deep reservoirs. (1) In the simulated ultra-deep layer with a burial depth of 6000-8000 m, the mechanical compaction under overpressure reduces the remaining primary pores by about a half that under hydrostatic pressure. Overpressure can effectively suppress the mechanical compaction to allow the preservation of intergranular primary pores. (2) The linear contact length ratio under overpressure is always smaller than the linear contact length ratio under hydrostatic pressure at the same depth. In deep reservoirs, the difference between the mechanical compaction degree under overpressure and hydrostatic pressure shows a decreasing trend, the effect of abnormally high pressure to resist the increase of effective stress is weakened, and the degree of mechanical compaction is gradually close to that under hydrostatic pressure. (3) The microfractures in skeleton particles of deep reservoirs under overpressure are thin and long, while the microfractures in skeleton particles of deep reservoirs under hydrostatic pressure are short and wide. This difference is attributed to the probable presence of tension fractures in the rocks containing abnormally high pressure fluid. (4) The microfractures in skeleton particles under overpressure were mainly formed later than that under hydrostatic pressure, and the development degree and length of microfractures both extend deeper. (5) The development stages of microfractures under overpressure are mainly controlled by the development stages of abnormally high pressure and the magnitude of effective stress acting on the skeleton particles. Moreover, the development stages of microfractures in skeleton particles are more than those under hydrostatic pressure in deep reservoir. The multi-stage abnormally high pressure plays an important role in improving the physical properties of deep reservoirs.

Sequence structure, sedimentary evolution and their controlling factors of the Jurassic Lianggaoshan Formation in the East Sichuan Basin, SW China

Based on the data of outcrops, seismic sections, thin sections, heavy mineral assemblages and detrital zircon U-Pb dating, the sedimentary characteristics, lake level fluctuation and provenance characteristics of the Middle Jurassic Lianggaoshan Formation(J_(2)l) in eastern Sichuan Basin, SW China, were investigated to reveal the control of tectonic movements of the surrounding orogenic belts on the sedimentary systems. The J_(2)lmainly developed a delta–lake sedimentary system, which contained a complete third-order sequence that was subdivided into four lake level up-down cycles(fourth-order sequence).The lake basins of cycles Ⅰ and Ⅱ were mainly distributed in eastern Sichuan Basin, while the lake basins of cycles Ⅲ and Ⅳ migrated to central Sichuan Basin, resulting in the significant difference in sedimentary characteristics between the north and the south of eastern Sichuan Basin. The provenance analysis shows that there were three types of provenances for J_(2)l. Specifically, the parent rocks of Type Ⅰ were mainly acidic igneous rocks and from the proximal northern margin of the Yangtze Plate;the parent rocks of Type Ⅱ were intermediate-acid igneous rocks and metamorphic rocks and from the central parts of the southern and northern Qinling orogenic belts;the parent rocks of Type Ⅲ were mainly metamorphic rocks followed by intermediate–acid igneous rocks, and from the North Daba Mountain area. It is recognized from the changes of sedimentary system and provenance characteristics that the sedimentary evolution of J_(2)lin eastern Sichuan Basin was controlled by the tectonic compression of the Qinling orogenic belt. In the early stage, the lake basin was restricted to the east of the study area, and Type Ⅰ provenance was dominant. With the intensifying north-south compression of the Qinling orogenic belt, the lake basin expanded rapidly and migrated northward, and the supply of Type Ⅱ provenance increased. In the middle and late stages, the uplift of the North Daba Mountain led to the lake basin migration and the gradual increase in the supply of Type Ⅲ provenance.

Behavior and controlling factors of methane adsorption in Jurassic continental shale,northeastern Sichuan Basin

The behavior and controlling factors of natural gas adsorption in the Jurassic continental shale in the northeastern Sichuan Basin are studied based on the organic geochemical features,mineral compositions and pore structure parameters through a series of experiments on samples from the shale.Results show that the total gas content of the shale measured on-site is 0.1-5.3 cm^(3)/g,with an average of 0.7 cm^(3)/g.The methane isothermal adsorption curves show a trend of increasing first and then decreasing,indicating an obvious excessive adsorption.The shale has a maximum adsorption capacity(V^(L))of 0.44-3.59 cm^(3)/g,with an average of 1.64 cm^(3)/g,lower than that of marine shale in the same basin.The organic matter content and pore structure characteristics are identified as the two main factors controlling the adsorption capacity of the shale.Micropores in the shale are the main storage space for gas to be adsorbed.Due to well developed shell laminae and interlayers in the shale,calcite plays a more important role than clay minerals in affecting the adsorption of gas to the rock.The formation temperature and water content also significantly inhibit the gas adsorption to the shale.Compared with marine shale in the basin,the Jurassic continental shale is more heterogeneous and lower in TOC values.Furthermore,with a more widely developed clayey shale lithofacies and shell limy shale lithofacies as well as relatively less developed organic pores and micropores,the continental shale is inferior to marine shale in terms of gas adsorption capacity.

New Jurassic Fossil True Bugs of the Pachymeridiidae(Hemiptera:Pentatomomorpha)from Northeast China

Four new fossil genera and species of true bugs from the family Pachymeridiidae, Beipiaocoris multifurcus, Bellicoris mirabilis, Nitoculus regiUus, and Viriosinervis stolidus, are described. New specimens were collected from the Middle and Upper Jurassic non-marine sedimentary strata from the Jiulongshan and Yixian Formations of northeast China. The species Karatavocoris asiatica Becker-Migdisova, 1963, which was considered to be a member of the family Coreidae is transferred to the Pachymeridiidae. A new map of all known and newly discovered fossil pachymeridiid localities is given. The diagnosis of the family is modified.

Paleozoic Accretion-Collision Events and Kinematics of Ductile Deformation in the Eastern Part of the Southern-Central Tianshan Belt, China

The Tianshan range could have been built by both late Early Paleozoicaccretion and Late Paleozoic collision events. The late Early Paleozoic Aqqikkudug-Weiya suture ismarked by Ordovician ophiolitic melange and a Silurian flysch sequence, high-pressure metamorphicrelics, and mylonitized rocks. The Central Tianshan belt could principally be an Ordovician volcanicarc; whereas the South Tianshan belt, a back-arc basin. Macro- and microstructures, along withunconformities, provide some kinematic and chronological constraints on 2-phase ductile deformation.The earlier ductile deformation occurring at ca. 400 Ma was marked by north-verging ductileshearing, yielding granulite-bearing ophiolitic melange blocks and garnet-pyroxene-facies ductiledeformation, and the later deformation, a dextral strike-slip tectonic process, occurred during theLate Carboniferous-Early Permian. Early Carboniferous molasses were deposited unconformably onpre-Carboniferous metamorphic and ductilely sheared rocks, implying the end of the early orogeny.The large-scale ductile strike-slip along the Aqqikkudug-Weiya zone was possibly caused by thesecond tectonic event, the Hercynian collision between the northern Tarim block and the southernSiberian block. Late Paleozoic granitic magmatism and superimposed structures overprinted this EarlyPaleozoic deformation belt. Results of geometric and kinematic studies suggest that the primaryframework of the Southern-Central Tianshan belt, at least the eastern part of the Tianshan belt, wasbuilt by these two phases of accretion events.

Chinese Continental Blocks in Global Paleocontinental Reconstruction during Paleozoic and Mesozoic

The Cambrian to Cretaceous paleomagnetic data from Chinese continental and adjacent blocks were collected using principles to obtain reliable and high-precision paleomagnetic data and to pay attention to the similarity of paleobiogeography and the coordination of tectonic evolution.The Chinese continental blocks were laid up on the reconstruction of proposed global paleocontinents with almost the same scale.Thus,it can be clearly recognized that the global continents,including Chinese continental blocks,range along latitudes on the southern side of the equator during the Early Paleozoic. In the Paleozoic,Chinese continental blocks were still located among the Laurentia,Siberia and Gondwana plates,following the fast moving of the Siberia Plate northwards,the amalgamation in a north-south direction at the western parts of the Laurentia and Gondwana plates,and the Iapetus and Rheic Oceans were subducted,eventually to form a uniform Pangea in the Late Paleozoic.The Australian and Indian plates of Eastern Gondwana moved and dispersed gradually southwards, continued to extend the Paleo-Tethys Ocean.The Chinese continental and adjacent blocks were still located in the Paleo-Tethys Ocean,preserved the status of dispersion,gradually moving northwards, showing characteristics of ranging along a north-south orientation until the Permian.In addition,a series of local collisions happened during the Triassic,and consequently most of the Chinese continental blocks were amalgamated into the Pangea,except for the Gangdise and Himalayan blocks. There was a counter-clockwise rotation of the Eastern Asian continent in the Jurassic and northwards migration of the Chinese continent in varying degrees during the Cretaceous,but the Himalayan and Indian plates did not collide into the Chinese continent during this period.