A Family of High_order Accuracy Explicit Difference Schemes for Solving 2-D Parabolic Partial Differential Equation

A family of high_order accuracy explicit difference schemes for solving 2_dimension parabolic P.D.E. are constructed. Th e stability condition is r=Δt/Δx 2=Δt/Δy 2【1/2 and the truncation err or is O(Δt 3+Δx 4).

Parabolic Partial Differential Equations as Inverse Moments Problem

We considerer parabolic partial differential equations under the conditions on a region . We will see that we can write the equation in partial derivatives as an Fredholm integral equation of first kind and will solve this latter with the techniques of inverse moments problem. We will find an approximated solution and bounds for the error of the estimated solution using the techniques on moments problem. Also we consider the one- dimensional one-phase inverse Stefan problem.

A FAMILY OF HIGH-ORDER ACCURACY EXPLICIT DIFFERENCE SCHEMES WITH BRANCHING STABILITY FOR SOLVING 3-D PARABOLIC PARTIAL DIFFERENTIAL EQUATION

A family of high-order accuracy explict difference schemes for solving 3-dimension parabolic P. D. E. is constructed. The stability condition is r = Deltat/Deltax(2) Deltat/Deltay(2) = Deltat/Deltaz(2) < 1/2 ,and the truncation error is 0(<Delta>t(2) + Deltax(4)).

Parabolic Partial Differential Equations with Border Conditions of Dirichlet as Inverse Moments Problem

We considerer parabolic partial differential equations: under the conditions , on a region . We will see that an approximate solution can be found using the techniques of generalized inverse moments problem and also bounds for the error of estimated solution. First we transform the parabolic partial differential equation to the integral equation . Using the inverse moments problem techniques we obtain an approximate solution of . Then we find a numerical approximation of when solving the integral equation , because solving the previous integral equation is equivalent to solving the equation .

A Class of Two-level High-order Accuracy Explicit Difference Scheme for Solving 3-D Parabolic Partial Differential Equation

A class of two-level high-order accuracy explicit difference scheme for solving 3-D parabolic P.D.E is constructed. Its truncation error is (Δt2+Δx4) and the stability condition is r=Δt/Δx2=Δt/Δy2=Δt/Δz2≤1/6.

<i>L</i>-Stable Block Hybrid Second Derivative Algorithm for Parabolic Partial Differential Equations

An L-stable block method based on hybrid second derivative algorithm (BHSDA) is provided by a continuous second derivative method that is defined for all values of the independent variable and applied to parabolic partial differential equations (PDEs). The use of the BHSDA to solve PDEs is facilitated by the method of lines which involves making an approximation to the space derivatives, and hence reducing the problem to that of solving a time-dependent system of first order initial value ordinary differential equations. The stability properties of the method is examined and some numerical results presented.

Heat Transfer Enhancement of the Absorber Tube in a Parabolic Trough Solar Collector through the Insertion of Novel Cylindrical Turbulators

This study includes an experimental and numerical analysis of the performances of a parabolic trough collector(PTC)with and without cylindrical turbulators.The PTC is designed with dimensions of 2.00 m in length and 1.00 m in width.The related reflector is made of lined sheets of aluminum,and the tubes are made of stainless steel used for the absorption of heat.They have an outer diameter of 0.051 m and a wall thickness of 0.002 m.Water,used as a heat transfer fluid(HTF),flows through the absorber tube at a mass flow rate of 0.7 kg/s.The dimensions of cylindrical turbulators are 0.04 m in length and 0.047 m in diameter.Simulations are performed using the ANSYS Fluent 2020 R2 software.The PTC performance is evaluated by comparing the experimental and numerical outcomes,namely,the outlet temperature,useful heat,and thermal efficiency for a modified tube(MT)(tube with novel cylindrical turbulators)and a plain tube(PT)(tube without novel cylindrical turbulators).According to the results,the experimental outlet temperatures recorded 63.2°C and 50.5°C for the MT and PT,respectively.The heat gain reaches 1137.5 Win the MT and 685.8 Win the PT.Compared to the PT collector,the PTC exhibited a(1.64 times)higher efficiency.

BLOW-UP CONDITIONS FOR A SEMILINEAR PARABOLIC SYSTEM ON LOCALLY FINITE GRAPHS

In this paper, we investigate a blow-up phenomenon for a semilinear parabolic system on locally finite graphs. Under some appropriate assumptions on the curvature condition CDE’(n,0), the polynomial volume growth of degree m, the initial values, and the exponents in absorption terms, we prove that every non-negative solution of the semilinear parabolic system blows up in a finite time. Our current work extends the results achieved by Lin and Wu (Calc Var Partial Differ Equ, 2017, 56: Art 102) and Wu (Rev R Acad Cien Serie A Mat, 2021, 115: Art 133).

A Stable FE-FD Method for Anisotropic Parabolic PDEs with Moving Interfaces

In this paper,a new finite element and finite difference(FE-FD)method has been developed for anisotropic parabolic interface problems with a known moving interface using Cartesian meshes.In the spatial discretization,the standard P,FE discretization is applied so that the part of the coefficient matrix is symmetric positive definite,while near the interface,the maximum principle preserving immersed interface discretization is applied.In the time discretization,a modified Crank-Nicolson discretization is employed so that the hybrid FE-FD is stable and second order accurate.Correction terms are needed when the interface crosses grid lines.The moving interface is represented by the zero level set of a Lipschitz continuous function.Numerical experiments presented in this paper confirm second orderconvergence.

Improving Heat Transfer in Parabolic Trough Solar Collectors by Magnetic Nanofluids

A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.

Optimization of the Physical Aperture of the Parabolic Reflector Antenna

In fields like astronomy and radar technology, high-gain antennas are required for long-distance communication. Due to its relatively large gain, the use of parabolic antennas has become very popular over time, because they can easily achieve gains of above 30 dB at microwave and higher frequencies. Today, most systems’ success depends on how well the antennas perform. These antennas are available in different types and sizes. Each antenna’s effective area usually has less than the actual physical area of the antenna surface. This means that the unused area of the antenna is massive, and a waste. The aim of the research is to show that the actual physical aperture of a parabolic antenna can be reduced as much as possible to equal the effective area, as given by the antenna formula, thereby saving manufacturing costs, improve the aesthetics. In other words, the focus of this work is to experimentally show that reflector antenna can be made of smaller sizes but better performance. Measurements were taken from different positions from a parabolic antenna, the signal level measured and compared with signal levels for optimal performance.

Global Existence and Decay of Solutions for a Class of a Pseudo-Parabolic Equation with Singular Potential and Logarithmic Nonlocal Source

This article investigates the well posedness and asymptotic behavior of Neumann initial boundary value problems for a class of pseudo-parabolic equations with singular potential and logarithmic nonlinearity. By utilizing cut-off techniques and combining with the Faedo Galerkin approximation method, local solvability was established. Based on the potential well method and Hardy Sobolev inequality, derive the global existence of the solution. In addition, we also obtained the results of decay.

Design and Development of a Parabolic Trough Solar Air Heater for a Greenhouse Dryer

Design and Development of a Parabolic Trough Solar Air Heater (PTSAH) for a Greenhouse Dryer (GD) was done to improve the dryer’s performance. The materials used for the fabrication of the PTSAH included galvanized sheets covered with aluminium foil, an absorber tube made of GI pipe painted matt black to increase heat absorbance at the focal line, mild steel square tubes, shutter plywood, and an axial fan to push air through the absorber tube. Key geometrical parameters used for the design of the PTSAH were a rim angle of 98 degrees, focal length of 0.2608 m, height of 0.3451 m, length of 2 m, and an aperture width of 1.2 m. The PTSAH’s total aperture surface area was 2.4 m2, while its absorber tube surface area was 0.1587 m2. The PTSAH was experimentally tested to establish its thermal performance. It was found that the ambient air recorded an average value of 31.1˚C and that the air heater could increase the air temperature by 45.6˚C above ambient with a thermal efficiency of 5.3%. It can, therefore, be concluded that the PTSAH can significantly improve the performance of a GD by supplying the GD with air at a higher temperature than ambient.

An Explicit Difference Scheme with High Accuracy and Branching Stability for Solving Parabolic Partial Differential Equation

This paper presents an explicit difference scheme with accuracy and branching stability for solving onedimensional parabolic type equation by the method of undetermined parameters and its truncation error is O(△t4+△x4). The stability condition is r=a△t/△x2<1/2.

A POSTERIORI ERROR ESTIMATE FOR BOUNDARY CONTROL PROBLEMS GOVERNED BY THE PARABOLIC PARTIAL DIFFERENTIAL EQUATIONS

In this paper, we discuss the a posteriori error estimate of the finite element approximation for the boundary control problems governed by the parabolic partial differential equations. Three different a posteriori error estimators are provided for the parabolic boundary control problems with the observations of the distributed state, the boundary state and the final state. It is proven that these estimators are reliable bounds of the finite element approximation errors, which can be used as the indicators of the mesh refinement in adaptive finite element methods.

OSCILLATION THEOREM TO SYSTEMS OF IMPULSIVE NEUTRAL DELAY PARABOLIC PARTIAL DIFFERENTIAL EQUATIONS

In this paper, we study the oscillation of solutions to the systems of impulsive neutral delay parabolic partial differential equations. Under two different boundary conditions, we obtain some sufficient conditions for oscillation of all solutions to the systems.

A Fitted Numerov Method for Singularly Perturbed Parabolic Partial Differential Equation with a Small Negative Shift Arising in Control Theory

In this paper,a fitted Numerov method is constructed for a class of singularly perturbed one-dimensional parabolic partial differential equations with a small negative shift in the temporal variable.Similar boundary value problems are associated with a furnace used to process a metal sheet in control theory.Here,the study focuses on the effect of shift on the boundary layer behavior of the solution via finite difference approach.When the shift parameter is smaller than the perturbation parameter,the shifted term is expanded in Taylor series and an exponentially fitted tridiagonal finite difference scheme is developed.The proposed finite difference scheme is unconditionally stable.When the shift parameter is larger than the perturbation parameter,a special type of mesh is used for the temporal variable so that the shift lies on the nodal points and an exponentially fitted scheme is developed.This scheme is also unconditionally stable.The applicability of the proposed methods is demonstrated by means of two examples.

Enhanced efficiency in Concentrated Parabolic Solar Collector(CPSC) with a porous absorber tube filled with metal nanoparticle suspension

In this study, effects of different nanoparticles and porosity of absorber tube on the performance of a Concentrating Parabolic Solar Collector(CPSC) were investigated. A section of porous-filled absorber tube was modeled as a semi-circular cavity under the solar radiation which is filled by nanofluids and the governing equations were solved by FlexPDE numerical software. The effect of four physical parameters, nanoparticles type, nanoparticles volume fraction(φ), Darcy number(Da) and Rayleigh number(Ra), on the Nusselt number(Nu) was discussed. It turns out that Cu nanoparticle is the most suitable one for such solar collectors, compared to the commonly used Fe_3O_4, Al_2O_3, TiO_2.With the increased addition of Cu nanoparticles all the parameters φ, Da and Ra shows a significant increase against the Nu, indicates the enhanced heat transfer in such cases. As a result, low concentration of Cu nanoparticle suspension combined with porous matrix was supposed to be beneficial for the performance enhancement of concentrating parabolic solar collector.

A Kernel Based Unconditionally Stable Scheme for Nonlinear Parabolic Partial Differential Equations

In this paper,a class of high order numerical schemes is proposed to solve the nonlinear parabolic equations with variable coefficients.This method is based on our previous work[11]for convection-diffusion equations,which relies on a special kernel-based formulation of the solutions and successive convolution.However,disadvantages appear when we extend the previous method to our equations,such as inefficient choice of parameters and unprovable stability for high-dimensional problems.To overcome these difficulties,a new kernel-based formulation is designed to approach the spatial derivatives.It maintains the good properties of the original one,including the high order accuracy and unconditionally stable for one-dimensional problems,hence allowing much larger time step evolution compared with other explicit schemes.In additional,without extra computational cost,the proposed scheme can enlarge the available interval of the special parameter in the formulation,leading to less errors and higher efficiency.Moreover,theoretical investigations indicate that it is unconditionally stable for multi-dimensional problems as well.We present numerical tests for one-and two-dimensional scalar and system,demonstrating the designed high order accuracy and unconditionally stable property of the scheme.

NECESSARY AND SUFFICIENT CONDITIONS FOR OSCILLATIONS OF PARABOLIC PARTIAL DIFFERENTIAL EQUATIONS WITH DELAY

In this paper, by making use of the integral method and some results of the functional differential equations, oscillatory properties of the solutions of certain parabolic partial differential equations with multi-delays are investigated and a series of necessary and sufficient conditions for oscillations of the equations are established. The results fully indicate that the oscillations are caused by the delay and hence reveal the varied difference between these equations and those without delay.