Method for Six-Legged Robot Stepping on Obstacles by Indirect Force Estimation

Adaptive gaits for legged robots often requires force sensors installed on foot-tips,however impact,temperature or humidity can affect or even damage those sensors.Efforts have been made to realize indirect force estimation on the legged robots using leg structures based on planar mechanisms.Robot Octopus III is a six-legged robot using spatial parallel mechanism（UP-2UPS） legs.This paper proposed a novel method to realize indirect force estimation on walking robot based on a spatial parallel mechanism.The direct kinematics model and the inverse kinematics model are established.The force Jacobian matrix is derived based on the kinematics model.Thus,the indirect force estimation model is established.Then,the relation between the output torques of the three motors installed on one leg to the external force exerted on the foot tip is described.Furthermore,an adaptive tripod static gait is designed.The robot alters its leg trajectory to step on obstacles by using the proposed adaptive gait.Both the indirect force estimation model and the adaptive gait are implemented and optimized in a real time control system.An experiment is carried out to validate the indirect force estimation model.The adaptive gait is tested in another experiment.Experiment results show that the robot can successfully step on a 0.2 m-high obstacle.This paper proposes a novel method to overcome obstacles for the six-legged robot using spatial parallel mechanism legs and to avoid installing the electric force sensors in harsh environment of the robot＇s foot tips.

Mechanics Unloading Analysis and Experimentation of a New Type of Parallel Biomimetic Shoulder Complex

The structure design for high ratio of carrying capacity to deadweight is one of the challenges for the bionic mechanism,while the problem concerning high carrying capacity has not yet be solved for the existing shoulder complex.A new type biomimetic shoulder complex,which adopts 3-PSS/S（P for prismatic pair,S for spherical pair） spherical parallel mechanism（SPM）,is proposed.The static equilibrium equations of each component are established by using the vector method and the equations for constrain forces with certain load are solved.Then the constrain force on the middle limb and that on the side limbs are compared in order to verify the unloading performance of the mechanism.In addition,the prototype mechanism of the shoulder complex is developed,and the force feedback experiment is conducted to verify the static analysis,which indicates that the middle limb suffers most of the external force and the effect of mechanics unloading is achieved.The 3-PSS/S spherical parallel mechanism is presented for the shoulder complex,and the realization of mechanics unloading is benefit for the improvement of the carrying capacity of the shoulder complex.

Application of Parallel Mechanism in Varistructured Quadruped/Biped Human-carrying Walking Chair Robot

For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is proposed.The proposed robot could be used as biped and quadruped walking chair robots.Considering the conversion of the walking chair robot from the quadruped to the biped or vice versa,6-UPS and 2-UPS＋UP（U,P and S are universal joint,the prismatic pair,and sphere joint,respectively） parallel mechanisms are selected as the leg mechanism of the biped walking robot and quadruped walking robot,respectively.Combining the screw theory and theory of mechanism,the degrees of freedom of the leg mechanism and the body mechanism in diferent motion states are computed so as to meet the requirements of mechanism design.The motion characteristics of the 2-UPS＋UP parallel mechanism which is the key part of the walking chair robot are analyzed.Then,the workspace of the moving platform is drawn and the efect of the structural parameters on the workspace volume is studied.Finally,it is found that the volume of the workspace of the moving platform is bigger when the side length ratio and the vertex angle ratio of the fxed platform and the moving platform which are isosceles triangles are close to 1.This study provides a theoretical foundation for the prototype development.