Small-signal modeling and parameter extraction method for a multigate GaAs pHEMT switch

This paper presents an accurate small-signal model for multi-gate GaAs pHEMTs in switching-mode.The extraction method for the proposed model is developed.A 2-gate switch structure is fabricated on a commercial 0.5μm AlGaAs/GaAs pHEMT technology to verify the proposed model.Excellent agreement has been obtained between the measured and simulated results over a wide frequency range.

A novel physical parameter extraction approach for Schottky diodes

Parameter extraction is an important step for circuit simulation methods that are based on physical models of semiconductor devices. A novel physical parameter extraction approach for Schottky diodes is proposed in this paper. By employing a set of analytical formulas, this approach extracts all of the necessary physical parameters of the diode chip in a unique way. It then extracts the package parasitic parameters with a curve-fitting method. To validate the proposed approach, a model HSMS-282 c commercial Schottky diode is taken as an example. Its physical parameters are extracted and used to simulate the diode＇s electrical characteristics. The simulated results based on the extracted parameters are compared with the measurements and a good agreement is obtained, which verifies the feasibility and accuracy of the proposed approach.

Bio-inspired optimization algorithms for optical parameter extraction of dielectric materials: A comparative study

Particle swarm optimization(PSO) and invasive weed optimization(IWO) algorithms are used for extracting the modeling parameters of materials useful for optics and photonics research community. These two bio-inspired algorithms are used here for the first time in this particular field to the best of our knowledge. The algorithms are used for modeling graphene oxide and the performances of the two are compared. Two objective functions are used for different boundary values. Root mean square(RMS) deviation is determined and compared.

Characteristics and parameter extraction for NiGe/n-type Ge Schottky diode with variable annealing temperatures

Current transport mechanism in Ni-germanide/n-type Ge Schottky diodes is investigated using current-voltage characterisation technique with annealing temperatures from 300 ℃ to 500℃. Based on the current transport model, a simple method to extract parameters of the NiGe/Ge diode is presented by using the I-V characteristics. Parameters of NiGe/n-type Ge Schottky diodes fabricated for testing in this paper are as follows： the ideality factor n, the series resistance Rs, the zero-field barrier height Фb0, the interface state density Dit, and the interracial layer capacitance Ci. It is found that the ideality factor n of the diode increases with the increase of annealing temperature. As the temperature increases, the interface defects from the sputtering damage and the penetration of metallic states into the Ge energy gap are passivated, thus improving the junction quality. However, the undesirable crystallisations of Ni-germanide are observed together with NiGe at a temperature higher than 400℃. Depositing a very thin （-1 nm） heavily Ge-doped n＋ Ge intermediate layer can improve the NiGe film morphology significantly.

An Improved Parasitic Parameter Extraction Method for InP HEMT

An improved parasitic parameter extraction method for InP high electron mobil-ity transistor(HEMT)is presented.Parasitic parameter extraction is the first step of model parameter extraction and its accuracy has a great impact on the subsequent internal pa-rameter extraction.It is necessary to accurately determine and effectively eliminate the parasitic effect,so as to avoid the error propagation to the internal circuit parameters.In this paper,in order to obtain higher accuracy of parasitic parameters,parasitic parameters are extracted based on traditional analytical method and optimization algorithm to obtain the best parasitic parameters.The validity of the proposed parasitic parameter extraction method is verified with excellent agreement between the measured and modeled S-param-eters up to 40 GHz for InP HEMT.In 0.1-40 GHz InP HEMT,the average relative error of the optimization algorithm is about 9%higher than that of the analysis method,which verifies the validity of the parasitic parameter extraction method.The extraction of parasit-ic parameters not only provides a foundation for the high-precision extraction of small sig-nal intrinsic parameters of HEMT devices,but also lays a foundation for the high-preci-sion extraction of equivalent circuit model parameters of large signal and noise signals of HEMT devices.

A differential evolution approach for parameter extraction of solar cell from current-voltage characteristics

This letter presents an approach based on differential evolution （DE） algorithm for determining the solar cell model parameters from current-voltage （I - V） characteristics. The validity of this approach has been confirmed with experimental and simulated I - V data. It was demonstrated that the I - V curve derived from the parameters extracted by the DE approach is in good agreement with the experimental or simulated I - V data. A low objective function value as well as a high parameter precision can be obtained by the DE algorithm.

Diode parameter extraction by a linear cofactor difference operation method

The linear cofactor difference operator（LCDO） method,a direct parameter extraction method for general diodes,is presented.With the developed LCDO method,the extreme spectral characteristic of the diode voltage-current curves is revealed,and its extreme positions are related to the diode characteristic parameters directly.The method is applied to diodes with different sizes and temperatures,and the related characteristic parameters,such as reverse saturation current,series resistance and non-ideality factor,are extracted directly.The extraction result shows good agreement with the experimental data.

Small-signal model parameter extraction for microwave SiGe HBTs based on Y- and Z-parameter characterization

High frequency intrinsic small-signal model parameter extraction for microwave SiGe heterojunction bipolar transistors is studied, with a focus on the main feedback elements including the emitter series resistor, internal and external base-collector capacitors as well as the base series resistor, all of which are important in determining the behavior of the device equivalent circuit. In accordance with the respective features of definition of the Y- and Z-parameters, a novel combined use of them succeeds in reasonably simplifying the device equivalent circuit and thus decoupling the extraction of base-collector capacitances from other model parameters. As a result, a very simple direct extraction method is proposed. The proposed method is applied for determining the SiGe HBT small-signal model parameters by taking numerically simulated Y- and Z-parameters as nominal ＂measurement data＂ with the help of a Taurus-device simulator. The validity of the method is preliminarily confirmed by the observation of certain linear relations of device frequency behavior as predicted by the corresponding theoretical analysis. Furthermore, the extraction results can be used to reasonably account for the dependence of the extracted model parameters on device geometry and process parameters, reflecting the explicit physical meanings of parameters, and especially revealing the distributed nature of the base series resistor and its complex interactions with base-collector capacitors. Finally, the accuracy of our model parameter extraction method is further validated by comparing the modeled and simulated S-parameters as a function of frequency.

MODEL ANALYSIS AND PARAMETER EXTRACTION FOR MOS CAPACITOR INCLUDING QUANTUM MECHANICAL EFFECTS

The high frequency CV curves of MOS capacitor have been studied. It is shown that semiclassical model is a good approximation to quantum model and approaches to classical model when the oxide layer is thick. This conclusion provides us an efficient （semiclassical） model including quantum mechanical effects to do parameter extraction for ultrathin oxide device. Here the effective extracting strategy is designed and numerical experiments demonstrate the validity of the strategy.

Forward gated-diode method for parameter extraction of MOSFETs

The forward gated-diode method is used to extract the dielectric oxide thickness and body doping concentration of MOSFETs, especially when both of the variables are unknown previously. First, the dielectric oxide thickness and the body doping concentration as a function of forward gated-diode peak recombination-generation （R-G） current are derived from the device physics. Then the peak R-G current characteristics of the MOSFETs with different dielectric oxide thicknesses and body doping concentrations are simulated with ISE-Dessis for parameter extraction. The results from the simulation data demonstrate excellent agreement with those extracted from the forward gated-diode method.

Analysis and parameter extraction of memristive structures based on Strukov's non-linear model

Diverse models have been proposed for explaining the electrical performance of memristive devices. In principle, the behavior of internal variables associated to each one could be extracted from experimental results. In a former work, thermally grown TiOmemristive structures were built and characterized to obtain the constitutive relationship(magnetic flux versus charge). The aim of this work is to continue that analysis by determining the microscopic parameters within the frame of a simple model. We use the already obtained memristance dependence of time and the basic expressions from the non-linear model proposed by Strukov et al. to compute the state-variable,the mobility of the doping species, the speed of the boundary between the doped and the undoped regions, the voltages and the electric fields on the distinct regions. The power dissipation and its time evolution are also presented. Moreover, a quite different window function from those formerly proposed, which was estimated from experimental data, is also determined. This information provides a straightforward picture of the ionic transport during one cycle of a square voltage waveform within the framework of this simple model. Finally, a quality factor is proposed as the key parameter for actual memristors viewed under the same model.

A Direct Parameter-Extraction Method for GaInP/GaAs Heterojunction Bipolar Transistors Small-Signal Model

An accurate and broad-band method for hetero-junction bipolar transistors(HBT) small-signal model parameters-extraction is presented in this paper. An equivalent circuit forthe HBT under a forward-bias condition is proposed for extraction of accessresistance and parasiticinductance. This method differs from previous ones by extracting the c-quivalent circuit parameterswithout using special test structure or global numerical optimization techniques. The mainadvantage of this method is that a unique and physically meaningful set of intrinsic parameters isextracted from impedance and admittance representation of the measured S-pa-rameters in thefrequency range of 1-12 GHz under different bias conditions. The method yields a deviation of lessthan 5% between measured and modeled S-parameters.

Small-signal model parameter extraction for AlGaN/GaN HEMT

A new 22-element small signal equivalent circuit model for the AlGaN/G N high electron mobility transistor（HEMT） is presented. Compared with the traditional equivalent circuit model, the gate forward and breakdown conductions（G_（gsf） and G_（gdf）） are introduced into the new model to characterize the gate leakage current. Additionally, for the new gate-connected field plate and the source-connected field plate of the device, an improved method for extracting the parasitic capacitances is proposed, which can be applied to the small-signal extraction for an asymmetric device. To verify the model, S-parameters are obtained from the modeling and measurements. The good agreement between the measured and the simulated results indicate that this model is accurate,stable and comparatively clear in physical significance.

Optimal Extraction of Photovoltaic Model Parameters Using Gravitational Search Algorithm Approach

Extraction of accurate Photo Voltaic (PV) model parameters is a challenging task for PV simulator developers. To mitigate this challenging task a novel approach using Gravitational Search Algorithm (GSA) for accurate extraction of PV model parameters is proposed in this paper. GSA is a population based heuristic optimization method which depends on the law of gravity and mass interactions. In this optimization method, the searcher agents are collection of masses which interact with each other using laws of gravity and motion of Newton. The developed PV model utilizes mathematical equations and is described through an equivalent circuit model comprising of a current source, a diode, a series resistor and a shunt resistor including the effect of changes in solar irradiation and ambient temperature. The optimal values of photo-current, diode ideality factor, series resistance and shunt resistance of the developed PV model are obtained by using GSA. The simulations of the characteristic curves of PV modules (SM55, ST36 and ST40) are carried out using MATLAB/Simulink environment. Results obtained using GSA are compared with Differential Evolution (DE), which shows that GSA based parameters are better optimal when compared to DE.

Mixed Electric and Magnetic Coupling Design Based on Coupling Matrix Extraction

This paper proposes a design and fine-tuning method for mixed electric and magnetic coupling filters.It derives the quantitative relationship between the coupling coefficients(electric and magnetic coupling,i.e.,EC and MC)and the linear coefficients of frequencydependent coupling for the first time.Different from the parameter extraction technique using the bandpass circuit model,the proposed approach explicitly relatesEC and MC to the coupling matrix model.This paper provides a general theoretic framework for computer-aided design and tuning of a mixed electric and magnetic coupling filter based on coupling matrices.An example of a 7th-order coaxial combline filter design is given in the paper,verifying the practical value of the approach.

Comparative study of various methods for extraction of multi-quantum wells Schottky diode parameters

In this work,forward current voltage characteristics for multi-quantum wells Al_(0.33)Ga_(0.67)As Schottky diode were measured at temperature ranges from 100 to 300 K.The main parameters of this Schottky diode,such as the ideality factor,barrier height,series resistance and saturation current,have been extracted using both analytical and heuristics methods.Differential evolution(DE),particle swarm optimization(PSO)and artificial bee colony(ABC)have been chosen as candidate heuristics algorithms,while Cheung technic was selected as analytical extraction method.The obtained results show clearly the high performance of DE algorithms in terms of parameters accuracy,convergence speed and robustness.

Non Ideal Schottky Barrier Diode’s Parameters Extraction and Materials Identification from Dark I-V-T Characteristics

Several parameters of a commercial Si-based Schottky barrier diode (SBD) with unknown metal material and semiconductor-type have been investigated in this work from dark forward and reverse I-V characteristics in the temperature (T) range of [274.5 K - 366.5 K]. Those parameters include the reverse saturation current (Is), the ideality factor (n), the series and the shunt resistances (Rs and Rsh), the effective and the zero bias barrier heights (ΦB and ΦB0), the product of the electrical active area (A) and the effective Richardson constant (A**), the built-in potential (Vbi), together with the semiconductor doping concentration (NA or ND). Some of them have been extracted by using two or three different methods. The main features of each approach have been clearly stated. From one parameter to another, results have been discussed in terms of structure performance, comparison on one another when extracted from different methods, accordance or discordance with data from other works, and parameter’s temperature or voltage dependence. A comparison of results on ΦB, ΦB0, n and NA or ND parameters with some available data in literature for the same parameters, has especially led to clear propositions on the identity of the analyzed SBD’s metal and semiconductor-type.

A novel small-signal equivalent circuit model for GaN HEMTs incorporating a dual-field-plate

An accurate and novel small-signal equivalent circuit model for GaN high-electron-mobility transistors(HEMTs)is proposed,which considers a dual-field-plate(FP)made up of a gate-FP and a source-FP.The equivalent circuit of the overall model is composed of parasitic elements,intrinsic transistors,gate-FP,and source-FP networks.The equivalent circuit of the gate-FP is identical to that of the intrinsic transistor.In order to simplify the complexity of the model,a series combination of a resistor and a capacitor is employed to represent the source-FP.The analytical extraction procedure of the model parameters is presented based on the proposed equivalent circuit.The verification is carried out on a 4×250μm GaN HEMT device with a gate-FP and a source-FP in a 0.45μm technology.Compared with the classic model,the proposed novel small-signal model shows closer agreement with measured S-parameters in the range of 1.0 to 18.0 GHz.

Extraction of optical constants and thickness of nanometre scale TiO2 film

TiO2 thin films were deposited on glass substrates by sputtering in a conventional rf magnetron sputtering system. X-ray diffraction pattern and transmission spectrum were measured. The curves of refraction index and extinction coefficient distributions as well as the thickness of films calculated from transmission spectrum were obtained. The optimization problem was also solved using a method based on a constrained nonlinear programming algorithm.

Valuation and Determination of Seven and Five Parameters of Photovoltaic Generator by Iterative Method

The mathematical modeling of solar cells is essential for any optimization operation of the efficiency or the diagnosis of photovoltaic generator. The photovoltaic module is generally represented by an equivalent circuit whose parameters are experimentally calculated by using the characteristic current-tension, I-V. The precise determination of these parameters stays a challenge for the researchers, making to a big difference in the models and the digital methods dedicated to their characterizations. In the present paper, We are interested to characterize the parameters of single diode and two diodes models, in order to plan the behavior of the photovoltaic generator under real functioning conditions. We developed an identification method of the parameters using Newton Raphson method by using the software Matlab/Simulink. This method is the faster technique which allows the identification of several parameters and can be used in real time applications. The results of the proposed method show an accordance with the experimental and simulated characteristics of photovoltaic generator.