Deviation of the Lagrangian particle tracing method in the evaluation of the Southern Hemisphere annual subduction rate

The classical Lagrangian particle tracing method is widely used in the evaluation of the ocean annual subduction rate.However,our analysis indicates that in addition to neglecting the effect of mixing,there are two possible deviations in the method:one is an overestimation due to not considering that the amount of subducted water at the source location may be inadequate during the late winter of the first year when the mixed layer becomes shallow;the other one is an underestimation due to the neglect of the effective subduction caused by strong vertical pumping.Quantitative analysis shows that these two deviations mainly exist in the low-latitude subduction areas of the South Pacific and South Atlantic.The two deviations have very similar distribution areas and can partially off set each other.However,the overall deviation is still large,and the maximum relative deviation ratio can reach 50%;therefore,it cannot be ignored.

PTC: Full and Drift Particle Orbit Tracing Code for α Particles in Tokamak Plasmas

Fusion born α particle confinement is one of the most important issues in burning plasmas,such as ITER and CFETR.However,it is extremely complex due to the nonequilibrium characteristics,and multiple temporal and spatial scales coupling with background plasma.A numerical code using particle orbit tracing method(PTC)has been developed to study energetic particle confinement in tokamak plasmas.Both full orbit and drift orbit solvers are implemented to analyze the Larmor radius effects on α particle confinement.The elastic collisions between alpha particles and thermal plasma are calculated by a Monte Carlo method.A triangle mesh in poloidal section is generated for electromagnetic fields expression.Benchmark between PTC and ORBIT has been accomplished for verification.For CFETR burning plasmas,PTC code is used for α particle source and slowing down process calculation in 2D equilibrium.In future work,3D field like toroidal field ripples,Alfven and magnetohydrodynamics instabilities perturbation inducing α particle transport will be analyzed.

The viscous strip approach to simplify the calculation of the surface acoustic wave generated streaming

In recent decades,the importance of surface acoustic waves,as a biocompatible tool to integrate with microfluidics,has been proven in various medical and biological applications.The numerical modeling of acoustic streaming caused by surface acoustic waves in microchannels requires the effect of viscosity to be considered in the equations which complicates the solution.In this paper,it is shown that the major contribution of viscosity and the horizontal component of actuation is concentrated in a narrow region alongside the actuation boundary.Since the inviscid equations are considerably easier to solve,a division into the viscous and inviscid domains would alleviate the computational load significantly.The particles'traces calculated by this approximation are excellently alongside their counterparts from the completely viscous model.It is also shown that the optimum thickness for the viscous strip is about 9-fold the acoustic boundary layer thickness for various flow patterns and amplitudes of actuation.

Ray tracing particle image velocimetry-Challenges in the application to a packed bed

Ray tracing Particle Image Velocimetry(RT-PIV)is an optical technique for high resolution velocity measurements in challenging optical systems,such as transparent packed beds,that uses ray tracing to correct for distortions introduced by transparent geometries in the light paths.The ray tracing based correction is a post processing step applied to the raw PIV particle images before classical PIV evaluation.In this study,RT-PIV is performed in the top layer of a body centred cubic(bcc)sphere packing with gaseous flow,where optical access is obtained by the use of transparent N-BK7 glass balls with a diameter of d=40 mm.RT-PIV introduces new experimental and numerical challenges,for example a limited field of view,illumination difficulties,a very large required depth of field and high sensitivity to geometric parameters used in the ray tracing correction.These challenges and their implications are the main scope and discussed in the present work.Further,the validation of the ray tracing reconstruction step is presented and examples for the obtained corrected vector fields in a packed bed are given.The results show the strength of the method in reconstructing velocity fields behind transparent spheres that would not have been accessible by optical measurement techniques without the ray tracing correction.

Modeling the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer

In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.

INVESTIGATIONS ON MOISTURE TRANSPORTS, BUDGETS AND SOURCES RESPONSIBLE FOR THE DECADAL VARIABILITY OF PRECIPITATION IN SOUTHERN CHINA

In the context of global warming,apparent decdal-interdecdal variabilities can be detected in summer precipitation in southern China.Especially around the 1990 s,precipitation in South China experienced a phase transition from a deficiency regime to an abundance regime in the early 1990 s,while the Yangtze River Valley witnessed a phase shift of summer precipitation from abundance to deficiency in the late 1990 s.Pertinent analyses reveal a close relationship between such decadal precipitation shifts and moisture budgets,which is mainly modulated by the meridional component.This relationship can be attributed to large-scale moisture transport anomalies.Further,the HYSPLIT model is utilized to quantitatively evaluate relative moisture contributions from diverse sources during different regimes.It can be found that during the period with abundant precipitation in South China,the moisture contribution from the source of Indochina Peninsula-South China Sea increased significantly,while during the deficient precipitation regime in the Yangtze River Valley,moisture from local source,western Pacific and Indochina Peninsula-South China Sea contributed less to precipitation.It means some new features of relative moisture contributions from diverse sources to precipitation anomaly in southern China took shape after 1990 s.

Numerical Study on Separation of Circulating Tumor Cell Using Dielectrophoresis in a Four-Electrode Microfluidic Device

This numerical study proposes a cell sorting technique based on dielectrophoresis(DEP)in a microfluidic chip.Under the joint effect of DEP and fluid drag,white blood cells and circulating tumor cells are separated because of different dielectric properties.First,the mathematical models of device geometry,single cell,DEP force,electric field,and flow field are established to simulate the cell motion.Based on the simulation model,important boundary parameters are discussed to optimize the cell sorting ability of the device.A proper matching relationship between voltage and flow rate is then provided.The inlet and outlet conditions are also investigated to control the particle motion in the flow field.The significance of this study is to verify the cell separating ability of the microfluidic chip,and to provide a logistic design for the separation of rare diseased cells.

Experimental study on dynamic mechanism of vortex evolution in a turbulent boundary layer of low Reynolds number

The dynamic mechanism of the vortex generation and evolution process in a fully developed turbulent boundary layer with Reθ=97-194 is experimentally investigated.In this study,a moving single-frame and long-exposure(MSFLE)imaging method and a moving particle image velocimetry/particle tracing velocimetry(M-PIV/PTV)are designed and implemented for measuring the temporal and spatial evolution of vortex cores in both qualitative and quantitative ways,respectively.On the other hand,the Liutex vector,which is a new mathematical definition and identification of the vortex core proposed by Liu’s group,is first applied in the experiment for the structural visualization and quantitative analysis of the local fluid rotation.The results show that an intuitional process of vortex evolution can be clearly observed by tracking the vortex using MSFLE and verify that the roll-up of the shear layer induced by shear instability is the origin of vortex formation in turbulence.Furthermore,a quantitative investigation in terms of the critical vortex core boundary(size)and its accurate rotation strength is carried out based on the Liutex vector field analysis by M-PIV/PTV.According to statistics of the relation between vortex core size and the rotation strength during the whole process,the physical mechanism of vortex generation and evolution in a turbulent boundary layer of low Reynolds number can be summarized as a four-dominant-state course consisting of the“synchronous linear segment(SL)-absolute enhancement segment(AE)-absolute diffusion segment(AD)-skewing dissipation segment(SD)”.

Solids flow characteristics and circulation rate in an internally circulating fluidized bed

Internally circulating fluidized beds(ICFBs)enable effective control of the reactions and heat distribution in reactors.The ICFB contains two or more connected fluidized regions with different gas velocities to promote controlled solid circulation.The control of solid circulation rate(G_(0))is a critical factor.We recorded single particle trajectories by tracing a fluorescent particle,based on which particle flow behaviors were analyzed in different regions.G_(0)was obtained for a wide range of operating parameters.An increase in gas velocity in the down-and upflow beds shortened the particle circulation time in both beds and G_(0)increased significantly.As the static bed height increased,the differential pressure on both sides of the circulation port increased,which resulted in an increase in the solid circulation rate.As the orifice area increased,the flow resistance through the orifice decreased and thus the solid circulation rate increased.G_(0)increased with the decrease in particle size.The gas velocity in the upflowing bed and orifice area was the most important parameter to control the solid circulation rate.G_(0)was compared with the experimental measurements in literature and predictions using the correlation based on Bernoulli’s equation,and they agreed well.

Volumetric Vector-Based Representation for Indirect Illumination Caching

This paper introduces a caching technique based on a volumetric representation that captures low-frequency indirect illumination.This structure is intended for efficient storage and manipulation of illumination.It is based on a 3D grid that stores a fixed set of irradiance vectors.During preprocessing,this representation can be built using almost any existing global illumination software.During rendering,the indirect illumination within a voxel is interpolated from its associated irradiance vectors,and is used as additional local light sources.Compared with other techniques,the 3D vector-based representation of our technique offers increased robustness against local geometric variations of a scene.We thus demonstrate that it may be employed as an efficient and high-quality caching data structure for bidirectional rendering techniques such as particle tracing or photon mapping.

Deep learning approaches in flow visualization

With the development of deep learning(DL)techniques,many tasks in flow visualization that used to rely on complex analysis algorithms now can be replaced by DL methods.We reviewed the approaches to deep learning technology in flow visualization and discussed the technical benefits of these approaches.We also analyzed the prospects of the development of flow visualization with the help of deep learning.

Modeling of two-phase particulate flows in a confined jet with a focus on two-way coupling

A computational fluid dynamics model is used for the simulation of laminar flow ofwater-Al2O3 nanofluid in a confined slot impinging jet. The （steady-state and two-dimensional） Eulerian-Lagrangian model is used considering fluid-particle and particle-wall interactions （i.e., two-way coupling）. A collocated grid and the SIMPLE algorithm are used for the coupling of pressure and velocity fields. The deposition model is used to investigate the effect of particle deposition on the impingement surface. Results indicate that the particle trajectory becomes stable farther from the jet with a rising Reynolds number and jet- impingement surface distance ratio. The heat transfer coefficient of the mixture model is higher than that of the Eulerian-Lagrangican model.