A robust radio map is essential in implementing a fingerprint-based indoor positioning system(IPS).However,the offline site survey to manually construct the radio map is time-consuming and labour-intensive.Various int...A robust radio map is essential in implementing a fingerprint-based indoor positioning system(IPS).However,the offline site survey to manually construct the radio map is time-consuming and labour-intensive.Various interpolation techniques have been proposed to infer the virtual fingerprints to reduce the time and effort required for offline site surveys.This paper presents a novel fingerprint interpolator using a multi-path loss model(MPLM)to create the virtual fingerprints from the collected sample data based on different signal paths from different access points(APs).Based on the historical signal data,the poor signal paths are identified using their standard deviations.The proposed method reduces the positioning errors by smoothing out the wireless signal fluctuations and stabilizing the signals for those poor signal paths.By consideringmultipath signal propagations from different APs,the inherent noise from these signal paths can be alleviated.Firstly,locations of the signal data with standard deviations higher than the threshold are identified.The new fingerprints are then generated at these locations based on the proposed M-PLM interpolation function to replace the old fingerprints.The proposed technique interpolates virtual fingerprints based on good signal paths with more stable signals to improve the positioning performance.Experimental results show that the proposed scheme enhances the positioning accuracy by up to 44%compared to the conventional interpolation techniques such as the Inverse DistanceWeighting,Kriging,and single Path LossModel.As a result,we can overcome the site survey problems for IPS by building an accurate radio map with more reliable signals to improve indoor positioning performance.展开更多
This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation propert...This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation properties. The modified approach uses a combination of the tradional ceiling bounce method and a statistical approach. The effects of different transmitter-receiver separations and height of the ceiling on path loss and delay spread are studied in detail.展开更多
When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly r...When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly reduced, and most of the time, the radio waves will reach the user by bypass diffraction. Therefore, the traditional path loss model is no longer applicable, and the improved model should be proposed. In this paper, we firstly proposed an indoor radio propagation model based on dominant path in which the received signal strength has nothing to do with the direct distance between user and access point, but is related to the length of dominant path. Then on the basis of dominant path model, the NLOS influence is considered in order to further improve the accuracy of dominant path model. Experimental results demonstrated that the proposed dominant path model can improve the accuracy of traditional path loss model remarkably.展开更多
In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scen...In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scene between an unmanned aerial vehicle(UAV)and a boat is simulated to study the marine wireless channel.Firstly,an improved spatial partitioning ray tracing algorithm is proposed to track the propagation path of electromagnetic waves at sea surface.Secondly,a mobile channel is simulated and modeled based on the track results.Finally,a loss measurement is carried out in the coastal waters based on the simple wireless channel loss measuring platform,and a path loss propagation model is built.Then we compare the actual measurement data with the simulation results and find that the two are have good consistency,which further verifies the reliability of the simulation.展开更多
In recent years,high-speed railways(HSRs)have developed rapidly with a high transportation capacity and high comfort level.A tunnel is a complex high-speed rail terrain environment.It is very important to establish an...In recent years,high-speed railways(HSRs)have developed rapidly with a high transportation capacity and high comfort level.A tunnel is a complex high-speed rail terrain environment.It is very important to establish an accurate channel propagation model for a railway tunnel environment to improve the safety of HSR operation.In this paper,a method for finite-state Markov chain(FSMC)channel modeling with least squares fitting based on non-uniform interval division is proposed.First,a path loss model is obtained according to measured data.The communication distance between the transmitter and receiver in the tunnel is non-uniformly divided into several large non-overlapping intervals based on the path loss model.Then,the Lloyd-Max quantization method is used to determine the threshold of the signal-to-noise ratio(SNR)and the channel state quantization value and obtain the FSMC state transition probability matrix.Simulation experiments show that the proposed wireless channel model has a low mean square error(MSE)and can accurately predict the received signal power in a railway tunnel environment.展开更多
工业物联网(industrial internet of things,IIoT)场景利用大量通信及工业设备的交互协同实现各类工业自动化应用,其下的信道具有多频段、强反射、密集散射、移动遮挡等特点.准确建立可表征上述特点的路径损耗模型存在巨大挑战,它是构...工业物联网(industrial internet of things,IIoT)场景利用大量通信及工业设备的交互协同实现各类工业自动化应用,其下的信道具有多频段、强反射、密集散射、移动遮挡等特点.准确建立可表征上述特点的路径损耗模型存在巨大挑战,它是构建该场景下可靠无线通信链路的关键.本文基于射线追踪结果,利用统计方法对IIoT场景下复杂信道的路径损耗模型进行建模与研究.首先,提出适用于多频段的路径损耗模型并构建与频率线性相关的隔断衰减因子;其次,引入距离、频率以及传播条件相关的金属机器路径损耗修正项,用于描述大型金属机器遮挡或密集金属散射体带来的额外路径损耗;最后,探索工业机器人运动对路径损耗的影响.本文所提出模型形式简洁,与射线追踪结果吻合度高,能够很好地描述IIoT场景下信道的多种特点对信道路径损耗的影响.本文研究结果可为IIoT场景下的链路预算和热点布设提供重要信息.展开更多
基金funded by the Ministry of Higher EducationMalaysia under the Fundamental Research Grant Scheme(FRGS)with grant number FRGS/1/2019/ICT02/MMU/02/1.
文摘A robust radio map is essential in implementing a fingerprint-based indoor positioning system(IPS).However,the offline site survey to manually construct the radio map is time-consuming and labour-intensive.Various interpolation techniques have been proposed to infer the virtual fingerprints to reduce the time and effort required for offline site surveys.This paper presents a novel fingerprint interpolator using a multi-path loss model(MPLM)to create the virtual fingerprints from the collected sample data based on different signal paths from different access points(APs).Based on the historical signal data,the poor signal paths are identified using their standard deviations.The proposed method reduces the positioning errors by smoothing out the wireless signal fluctuations and stabilizing the signals for those poor signal paths.By consideringmultipath signal propagations from different APs,the inherent noise from these signal paths can be alleviated.Firstly,locations of the signal data with standard deviations higher than the threshold are identified.The new fingerprints are then generated at these locations based on the proposed M-PLM interpolation function to replace the old fingerprints.The proposed technique interpolates virtual fingerprints based on good signal paths with more stable signals to improve the positioning performance.Experimental results show that the proposed scheme enhances the positioning accuracy by up to 44%compared to the conventional interpolation techniques such as the Inverse DistanceWeighting,Kriging,and single Path LossModel.As a result,we can overcome the site survey problems for IPS by building an accurate radio map with more reliable signals to improve indoor positioning performance.
文摘This paper proposes modifications to the tradional Ceiling Bounce Model and uses it to characterize diffuse indoor optical wireless channel by analyzing the effect of transceiver position on signal propagation properties. The modified approach uses a combination of the tradional ceiling bounce method and a statistical approach. The effects of different transmitter-receiver separations and height of the ceiling on path loss and delay spread are studied in detail.
文摘When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly reduced, and most of the time, the radio waves will reach the user by bypass diffraction. Therefore, the traditional path loss model is no longer applicable, and the improved model should be proposed. In this paper, we firstly proposed an indoor radio propagation model based on dominant path in which the received signal strength has nothing to do with the direct distance between user and access point, but is related to the length of dominant path. Then on the basis of dominant path model, the NLOS influence is considered in order to further improve the accuracy of dominant path model. Experimental results demonstrated that the proposed dominant path model can improve the accuracy of traditional path loss model remarkably.
基金National Natural Science Foundation of China(Grant number 61971365)National Natural Science Foundation of China(Grant number 61871339)+1 种基金National Natural Science Foundation of China(Grant number 61901403)Xiamen Science and Technology Plan Project(No.3502Z20183008).
文摘In 5G era,it is expected to achieve wireless network coverage including offshore areas.Modeling of marine wireless channels is the basis of constructing a marine communication system.In this paper,a communication scene between an unmanned aerial vehicle(UAV)and a boat is simulated to study the marine wireless channel.Firstly,an improved spatial partitioning ray tracing algorithm is proposed to track the propagation path of electromagnetic waves at sea surface.Secondly,a mobile channel is simulated and modeled based on the track results.Finally,a loss measurement is carried out in the coastal waters based on the simple wireless channel loss measuring platform,and a path loss propagation model is built.Then we compare the actual measurement data with the simulation results and find that the two are have good consistency,which further verifies the reliability of the simulation.
基金partially supported by Nation Science Foundation of China (61661025, 61661026)Foundation of A hundred Youth Talents Training Program of Lanzhou Jiaotong University (152022)
文摘In recent years,high-speed railways(HSRs)have developed rapidly with a high transportation capacity and high comfort level.A tunnel is a complex high-speed rail terrain environment.It is very important to establish an accurate channel propagation model for a railway tunnel environment to improve the safety of HSR operation.In this paper,a method for finite-state Markov chain(FSMC)channel modeling with least squares fitting based on non-uniform interval division is proposed.First,a path loss model is obtained according to measured data.The communication distance between the transmitter and receiver in the tunnel is non-uniformly divided into several large non-overlapping intervals based on the path loss model.Then,the Lloyd-Max quantization method is used to determine the threshold of the signal-to-noise ratio(SNR)and the channel state quantization value and obtain the FSMC state transition probability matrix.Simulation experiments show that the proposed wireless channel model has a low mean square error(MSE)and can accurately predict the received signal power in a railway tunnel environment.
文摘工业物联网(industrial internet of things,IIoT)场景利用大量通信及工业设备的交互协同实现各类工业自动化应用,其下的信道具有多频段、强反射、密集散射、移动遮挡等特点.准确建立可表征上述特点的路径损耗模型存在巨大挑战,它是构建该场景下可靠无线通信链路的关键.本文基于射线追踪结果,利用统计方法对IIoT场景下复杂信道的路径损耗模型进行建模与研究.首先,提出适用于多频段的路径损耗模型并构建与频率线性相关的隔断衰减因子;其次,引入距离、频率以及传播条件相关的金属机器路径损耗修正项,用于描述大型金属机器遮挡或密集金属散射体带来的额外路径损耗;最后,探索工业机器人运动对路径损耗的影响.本文所提出模型形式简洁,与射线追踪结果吻合度高,能够很好地描述IIoT场景下信道的多种特点对信道路径损耗的影响.本文研究结果可为IIoT场景下的链路预算和热点布设提供重要信息.
