One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT...One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT） nanofibers with average diameters about 65 nm are prepared by electrospinning from poly（vinyl pyrrolidone） （PVP） and metal salts.The precursor composite NZFO/PZT/PVP nanofibers and the subsequent calcined NZFO/PZT nanofibers are investigated by Fourier transform infrared spectroscopy （FT- IR） ,X-ray diffraction （XRD）,scanning electron microscopy （SEM）.The magnetic properties for nanofibers are measured by vibrating sample magnetometer（VSM）.The NZFO/PZT nanofibers obtained at calcination temperature of 900 °C for 2 h consist of the ferromagnetic spinel NZFO and ferroelectric perovskite PZT phases,which are constructed from about 37 nm NZFO and 17 nm PZT grains.The saturation magnetization of these NZFO/PZT nanofibers increases with increasing calcination temperature and contents of NZFO in the composite.展开更多
This work investigated the microwave dielectric properties of A-site substitution by rare earth La3＋in（Pb0.5Ca0.5）（Fe0.5Ta0.5）O3（PCFT） system.A single perovskite phase was obtained only when the doping content ...This work investigated the microwave dielectric properties of A-site substitution by rare earth La3＋in（Pb0.5Ca0.5）（Fe0.5Ta0.5）O3（PCFT） system.A single perovskite phase was obtained only when the doping content was 2%.Suitable La3＋ doping improved microwave dielectric performances.Excessive La3＋doping caused the formation of secondary phase,which resulted in the decreasing of permittivity εrand quality factor Qfvalues.Especially,when the doping content is 2%-5%,permittivity εrwas above 75 and Qfvalues were 6 902-7 416 GHz.展开更多
The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ ...The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ to 1 100 ℃. The sintering temperature of the specimens with the glass could be lowered from 1125 ℃ to 1 025℃ without the degradation of microwave dielectric properties. The microwave results showed that the dielectric constant cr was not significantly different while Qf values decreased with the increase of CuV206 content of PBC glass. For the specimens doped with PB-CV0.1 glass （81% PbO-9% B203-10% CuV2O6） and sintered at 1 025 ℃ for 3 h, the microwave dielectric properties of Qf=4 823 GHz, Cr=107.1 with TCF=＋15.03 ×10^-6/℃ were obtained.展开更多
Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capac...Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capacity(3860 m Ah/g)and the lowest electrochemical potential(-3.04 V vs.the standard hydrogen electrode)[3–6].However,issues of Li metal anode,such as Li dendrite formation and large volume change during plating/stripping。展开更多
基金Funded by the National Natural Science Foundation of China (No. 50674048)Research Fund for the Doctoral Program of Higher Education of China(No.20103227110006)
文摘One-dimensional and quasi-one-dimensional nanostructure materials are promising building blocks for electromagnetic devices and nanosystems.In this work,the composite Ni0.5Zn0.5Fe2O4（NZFO）/ Pb（Zr0.52Ti0.48）O3（PZT） nanofibers with average diameters about 65 nm are prepared by electrospinning from poly（vinyl pyrrolidone） （PVP） and metal salts.The precursor composite NZFO/PZT/PVP nanofibers and the subsequent calcined NZFO/PZT nanofibers are investigated by Fourier transform infrared spectroscopy （FT- IR） ,X-ray diffraction （XRD）,scanning electron microscopy （SEM）.The magnetic properties for nanofibers are measured by vibrating sample magnetometer（VSM）.The NZFO/PZT nanofibers obtained at calcination temperature of 900 °C for 2 h consist of the ferromagnetic spinel NZFO and ferroelectric perovskite PZT phases,which are constructed from about 37 nm NZFO and 17 nm PZT grains.The saturation magnetization of these NZFO/PZT nanofibers increases with increasing calcination temperature and contents of NZFO in the composite.
基金Project supported by the National Natural Science Foundation of China (Grant No.60578041)the National High Technology Research and Development Program of China (Grant No.715-006-0060)
文摘This work investigated the microwave dielectric properties of A-site substitution by rare earth La3＋in（Pb0.5Ca0.5）（Fe0.5Ta0.5）O3（PCFT） system.A single perovskite phase was obtained only when the doping content was 2%.Suitable La3＋ doping improved microwave dielectric performances.Excessive La3＋doping caused the formation of secondary phase,which resulted in the decreasing of permittivity εrand quality factor Qfvalues.Especially,when the doping content is 2%-5%,permittivity εrwas above 75 and Qfvalues were 6 902-7 416 GHz.
基金Project supported by the National Natural Science Foundation of China (Grant No.60578041)the National High Tech-nology Research and Development Program of China (Grant No.715-006-0060)
文摘The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ to 1 100 ℃. The sintering temperature of the specimens with the glass could be lowered from 1125 ℃ to 1 025℃ without the degradation of microwave dielectric properties. The microwave results showed that the dielectric constant cr was not significantly different while Qf values decreased with the increase of CuV206 content of PBC glass. For the specimens doped with PB-CV0.1 glass （81% PbO-9% B203-10% CuV2O6） and sintered at 1 025 ℃ for 3 h, the microwave dielectric properties of Qf=4 823 GHz, Cr=107.1 with TCF=＋15.03 ×10^-6/℃ were obtained.
基金financial support by the National Natural Science Foundation of China(No.51802224)“Shanghai Rising-Star Program”(19QA1409300)Shanghai Aerospace Science and Technology Innovation Fundation(SISP2018)。
文摘Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capacity(3860 m Ah/g)and the lowest electrochemical potential(-3.04 V vs.the standard hydrogen electrode)[3–6].However,issues of Li metal anode,such as Li dendrite formation and large volume change during plating/stripping。
