Geochronology,Geochemistry and Petrogenesis of the Bangbule Quartz Porphyry:Implications for Metallogenesis

The Bangbule skarn lead-zinc(Pb-Zn)deposit(>1 Mt Zn+Pb)is located in the western Nyainqentanglha polymetallic metallogenetic belt,central Tibet.Lenticular orebodies are all hosted in skarn and developed in the contact zone between the quartz porphyry and carbonate strata of the mid Paleozoic Middle to Upper Chaguoluoma Formation as well as in carbonate and sandstone beds of the Upper Paleozoic Laga Formation.As a newly discovered skarn deposit,the geological background and metallogenesis of this deposit remain poorly understood.Detailed petrological,geochemical and geochronological data of the ore-related quartz porphyry,helps constrain the mineralization age and contributes to discussion on the ore genesis of the Bangbule deposit.Both endoskarn and exoskarn are identified in the Bangbule deposit.From quartz porphyry to carbonate formation,the exoskarn is zoned from proximal garnet skarn to distal pyroxene skarn.Zircon U-Pb dating results show that the quartz porphyry formed at 73.9±0.8 Ma.Geochemical analysis results show that the quartz porphyry has high contents of SiO_(2)(71.40–74.94 wt%)and K_(2)O+Na_(2)O(3.76–8.46 wt%)with A/CNK values of 0.69 to 1.06.Besides,the quartz porphyry is enriched in large ion lithophile elements(LILEs)and light rare earth elements(LREEs)and have lowεNd(t)(from-8.25 to-8.19)and high initial(^(87)Sr/^(86)Sr)i values(0.713611–0.714478).Major,trace elements and whole-rock F concentration analysis results from the endoskarn samples show higher TFe_(2)O_(3),MgO,CaO,Pb+Zn,W,Sn,Mo and F etc.,and lower alkalis(K_(2)O,Na_(2)O,Sr and Ba)than those of fresh quartz porphyry,indicating that the early ore-forming fluids were an Ca-Fe-F-enriched fluid.Massive ore in the proximal skarn might be related to the high F content in the magma,which lowered the solidus temperature of the quartz porphyry magma and caused a lower temperature of the ore-forming fluids,as well as facilitating the precipitation of sphalerite and galena.Based on the geochemical characteristics presented in this study,we propose that the ore-related quartz porphyry was formed by partial melting of crust materials with some juvenile crustal component input.The partial melting of the middle-upper crust after the initial enrichment of lead and zinc elements are important for the formation of Pb-Zn deposits.The case study of the Bangbule deposit has proven that there is still a crust-derived magmatic source region in the western segment of the central Lhasa terrane.Therefore,there is still great potential for Pb-Zn mineralization and Pb-Zn exploration.

滇西腾冲大硐厂Pb-Zn矿床成因:来自稀土元素地球化学的证据

腾冲大硐厂Pb-Zn矿床是西南“三江”成矿带腾冲地块东部具有代表性的矽卡岩型矿床之一,其成矿过程可划分为矽卡岩期(早、晚矽卡岩阶段)和石英-硫化物期(早、晚硫化物阶段)。方解石是该矿床中最主要的脉石矿物,其形成与铅锌矿密切相关。本文对主成矿期(石英-硫化物期)不同阶段方解石的REE特征与成矿早期(矽卡岩期)符山石、绿帘石以及大弯山单元花岗岩、大理岩和灰岩的REE特征进行对比研究。结果表明,主成矿期2个阶段方解石REE配分模式均为右倾型,∑REE分别为84.68×10^(-6)~125.58×10^(-6)和35.08×10^(-6)~38.24×10^(-6),LREE/HREE值为1.59~2.04和4.36~5.38,(La/Yb)_(N)值为1.12~1.81和4.01~5.72,(La/Sm)_(N)值为2.62~3.16和5.09~6.38,(Gd/Yb)_(N)值为0.64~0.97和1.22~1.30。2个阶段方解石的Yb/La-Yb/Ca投点位于岩浆成因与热液成因的交界部位,符山石、绿帘石、早硫化物阶段方解石和大理岩的Y/Ho值与大弯山单元花岗岩关系密切,晚硫化物阶段方解石的Y/Ho值介于大弯山单元花岗岩和围岩之间,暗示矿床主成矿期两阶段方解石皆为岩浆热液成因,成矿流体主要来源于岩浆热液,但成矿流体在主成矿期晚硫化物阶段的水岩反应过程中可能遭受了二叠系灰岩地层的强烈混染。从成矿早期到主成矿期δEu值分别为1.25~1.75和0.54~0.78,δCe值为0.85~0.94和0.94~1.05,氧化还原环境的转变可能是导致矿质沉淀的主要原因,后期水岩反应对矿质沉淀也存在少量影响。矿区中矿体离早白垩世花岗斑岩体较近,主要呈层状、似层状产于断裂的蚀变碳酸盐岩(矽卡岩)中,矽卡岩矿物自深向浅具有分带性。综合区域地质特征及矿床控矿因素分析,认为大硐厂Pb-Zn矿床属于矽卡岩型Pb-Zn矿床。

Metallogenesis related to Mesozoic Granitoids in the Nanling Range, South China and Their Geodynamic Settings

Affected by the compressive stress from the South-Central （Indo-China） Peninsula, the Indosinian orogenesis, characterized by collision, thrust and uplifting, took place inside the South China Plate during 250-230 Ma. The ages of the Indosinian granitoids in the Nanling Range and vicinity areas are mostly 240-205 Ma, indicating that they were emplaced in both late collision and post-collision geodynamic environments. No important granite-related metallogenesis occurred in this duration. A post-orogenic setting started at the beginning of the Yanshanian Period, which controlled large-scale granitic magmatism and related metallogenesis. This paper makes the first attempt to divide the Yanshanian Period into three sub-periods, i.e. the early, middle and late Yanshanian Periods, based mainly on the features of magmatism, especially granitoids and related metallogenesis and their geodynamic environments. The magmatic association of the Early Yanshanian （about 185-170 Ma） comprises four categories of magmatism, i.e. basalt, bimodal volcanics, A-type granite and intraplate high-K calc-alkaline （HKCA） magmatism, which indicates an extension-thinning of lithosphere and upwelling of mantle material to a relative small and local extent. Pb-Zn, Cu and Au mineralizations associated with HKCA magmatism represents the first high tide of Mesozoic metallogenesis in the Nanling Range area. During the middle Yanshanian, the lithosphere was subjected to more extensive and intensive extending and thinning, and hence mantle upwelling and basaltic magma underplating caused a great amount of crust remelting granitoids. This period can be further divided into two stages. The first stage （170-150 Ma） is represented by large-scale emplacement of crust remelting granites with local tungsten mineralization at its end. The second stage （150-140 Ma） is the most important time of large-scale mineralizations of non-ferrous and rare metals, e.g. W, Sn, Nb-Ta, Bi, Mo, Be, in the Nanling Range area. The late Yanshanian （140-65 Ma） was generally characterized by full extension and breakup of the lithosphere of South China. However, owing to the influence of the Pacific Plate movement, the eastern part of South China was predominated by subduction-related compression, which resulted in magmatism of calc-alkaline and shoshonite series and related metallogeneses of Au, Ag, Pb-Zn, Cu and （Mo, Sn）, followed by extension in its late stage. In the Nanling Range area, the late Yanshanian magmatism was represented by granitic volcanic-intrusive complexes and mafic dikes, which are genetically related to volcanic-type uranium and porphyry tin deposits, and the mobilization-mineralization of uranium from pre-existing Indosinian granites.

Cascaded Evolution of Mantle Plumes and Metallogenesis of Core- and Mantle-derived Elements

Mineral deposits are unevenly distributed in the Earth's crust, which is closely related to the formation and evolution of the Earth. In the early history of the Earth, controlled by the gravitational contraction and thermal expansion, lighter elements, such as radioactive, halogen-family, rare and rare earth elements and alkali metals, migrated upwards; whereas heavier elements, such as iron-family and platinum-family elements, base metals and noble metals, had a tendency of sinking to the Earth's core, so that the elements iron, nickel, gold and silver are mainly concentrated in the Earth's core. However, during the formation of the stratified structure of the Earth, the existence of temperature, pressure and viscosity differences inside and outside the Earth resulted in vertical material movement manifested mainly by cascaded evolution of mantle plumes in the Earth. The stratifications and vertical movement of the Earth were interdependent and constituted the motive force of the mantle-core movement. The cascaded evolution of mantle plumes opens the passageways for the migration of deep-seated ore-forming material, and thus elements such as gold and silver concentrated in the core and on the core-mantle boundary migrate as the gaseous state together with the hot material flow of mantle plumes against the gravitational force through the passageways to the lithosphere, then migrate as the mixed gas-liquid state to the near-surface level and finally are concentrated in favorable structural expansion zones, forming mineral deposits. This is possibly the important metallogenic mechanism for gold, silver, lead, zinc, copper and other many elements. Take for example the NE-plunging crown of the Fuping mantle-branch structure, the paper analyzes ductile-brittle shear zone-type gold fields (Weijiayu) at the core of the magmatic-metamorphic complex, principal detachment-type gold fields (Shangmingyu) and hanging-wall cover fissure-vein-type lead-zinc polymetallic ore fields (Lianbaling) and further briefly analyzes the source of ore-forming material and constructs an ore-forming and -controlling model.

Major Advances in the Study of the Precambrian Geology and Metallogenesis of the North China Craton:A Review

The North China Craton （NCC） is one of the most ancient cratons in the world and records a complex geological evolution since the early Precambrian. In addition to recording major geological events similar to those of other cratons, the NCC also exhibits some unique features such as multi- stage cratonization （late Archaean and Palaeoproterozoic） and long-term rifting during the Meso- Neoproterozoic. The NCC thus provides one of the best examples to address secular changes in geological history and metallogenic epochs in the evolving Earth. We summarize the major geological events and metallogenic systems of the NCC, so that the evolutionary patterns of the NCC can provide a better understanding of the Precambrian NCC and facilitate comparison of the NCC with other ancient continental blocks globally. The NCC experienced three major tectonic cycles during the Precambrian： （1） Neoarchaean crustal growth and stabilization; （2） Palaeoproterozoic rifting-subduction-accretion-collision with imprints of the Great Oxidation Event and （3） Meso-Neoproterozoic multi-stage rifting. A transition from primitive- to modern-style plate tectonics occurred during the early Precambrian to late Proterozoic and is evidenced by the major geological events. Accompanying these major geological events, three major metallogenic systems are identified： （1） the Archaean banded iron formation system; （2） Palaeoproterozoic Cu-Pb-Zn and Mg-B systems and （3） a Mesoproterozoic rare earth element-Fe- Pb-Zn system. The ore-deposit types in each of these metallogenic systems show distinct characteristics and tectonic affinities.

Fluid Geochemistry and Metallogenesis of the Hatu Gold Deposit in the Junggar Basin, Xinjiang

The Hatu large gold deposit is located on the western margin of the Junggar basin, Xinjiang. Its mineralization is characterized by auriferous quartz veins and Au-bearing altered fracturing zones. Studies on mineralogy, inclusions and decrepitation temperature indicate that the gold deposit was formed by overlapping of two kinds of fluid of different origins, instead of gradual evolution of a single fluid. The auriferous quartz veins are related to magmatism-originated fluid, but the Au-bearing altered fracturing zones to deep-derived fluid. Bonanzas in quartz veins were formed and localized at overlapping positions of two types of fluid under intensive compression.

TECTONIC SETTING AND METALLOGENESIS OF THE PRINCIPAL SECTORS OF THE TETHYAN EURASIAN METALLOGENIC BELT

Three global metallogenic belts were formed in the world during Mesozoic and post Mesozoic times. Two of them are situated along the western and eastern Pacific margins, and the third one——the Tethyan Eurasian metallogenic belt (TEMB) is related to the domain of Eurasian plate and flanked on the south by the Afro Arabian and Indian plates.The general tectonic evolution of the realm where the TEMB was formed is closely connected with the history of Tethys. The emplacement of ore deposits and the development of regional metallogenic units are related to a definitive time interval and to specific tectonic settings such as: (1) Intracontinental rifting along the northern margin of Gondwana and/or fragments already separated; (2) Oceanic environments (i.e. ophiolite complexes and ocean floor sediments) host podiform chromite deposits, volcano sedimentary cupriferous pyrite deposits (Cyprus type), stratiform manganese deposits, and sporadically PGE deposits; (3) Subduction related settings involve mainly porphyry copper deposits, hydrothermal massive sulphide polymetallic deposits, and epithermal deposits. So far identified mineralization of porphyry copper exceeds in the TEMB over 100 million tons of copper metal; and (4) Collision and post collision continent continent setting includes deposits of lead zinc, antimony, gold, in some sectors tin deposits, as well. The giant deposits of Li pegmatite occur sporadically. The TEMB is almost a continuously mineralized belt, but within it, some sectors display specific features of tectonic settings, association of elements, minerals and morphogenetic types of mineralization.

Qinling Orogenic Belt:Its Palaeozoic-Mesozoic Evolution and Metallogenesis

The formation, development and evolution of the Qinling orogenic belt can be divided into three stages: (1) formation and development of Precambrian basement in the Late Archaean-Palaeoproterozoic (3.0–1.6 Ga), (2) plate evolution (0.8–0.2 Ga), and (3) intracontinental orogeny and tectonic evolution in the Mesozoic.

Study on the geological conditions of metallogenesis of the Shazi large-scale anatase deposit in Qinglong County, Guizhou Province

The Shazi large-scale anatase deposit in Qinglong County, Guizhou Province, has been discovered recently and now is under exploration. Investigations show that the orebodies mostly occur at the top of the karst unconformity of the Middle Permian Maokou Formation strata and at the bottom of the Emeishan basalt. And the following three prerequisites should be satisfied for the formation of the deposit: 1) there must be the material source of anatase; 2) there must be weekly alkaline media and low-tempeature and low-pressure conditions; 3) there was no high-temperature and high-pressure environment subsequently for the transformation of anatase into rutile. In the Emeishan basalt of western Guizhou, the element Ti mostly entered the silicon-oxygen tetrahedra of picrite in heterovalent isomorphism(Ti4++Al3+→Mg2++Si4+). When volcanic ejecta resultant from strong eruption of the Emeishan basalt magma fell into water, picrite was usually dissociated to chlorite. Thus, the element Ti4+ in the picrite could be released from the silicon-oxygen tetrahedraa of picrite into water, and conbined with oxygen in the water to form Ti O2. This paper has proved that this deposit, enriched in anatase, discovered recently at Shazi, Qinglong Country, Guizhou Province, is a residual-deluvial-type deposit. Its genesis can be explained as follows. Volcanic clastics formed at the early stage of strong eruption of the Emeishan basalt magma were chemically deposited to form anatase in the low-temperature, low-pressure and weekly alkaline waters in the karst depressions at the top of the Maokou Formation(limestone) strata. The anatase was then dissociated owing to weathering and leaching during the Quaternary and the anatase was further enriched to form the residual-deluvial-type anatase ore deposit.

Characteristics of Fluid Inclusions and Metallogenesis of Annage Gold Deposit in Qinghai Province, China

The?Annage gold deposit is located at the east part of the eastern Kunlun orogenic belt. The characteristics of ore-forming fluids and metallogenesis were discussed by using fluid petrography, micro-thermometry and hydrogen-oxygen isotope analysis. Three stages, namely quartz-pyrite stage (A), quartz-polymetallic-sulfide stage (B) and quartz-ankerite stage (C) were included in the hydrothermal process as indicated by the results of this study. Inclusions developed in ore-bearing quartz veins from stages A and B are of three types: aqueous inclusions (type I), CO2-bearing inclusions (type II) and pure CO2?inclusions (type III). All three types of inclusions, mainly type I, are presented in stage A, having homogenization temperatures at 180°C - 360°C, and salinities ranging from 0.53% to 21.44%. In addition to development of type I inclusions, type II and III inclusions increase significantly in stage B, with homogenization temperatures ranging from 160°C to 330°C, and salinities are from 1.32% to 22.01%. Based on micro-thermometry, fluids in Annage deposit are of H2O-NaCl-CO2?type with medium-high temperature (140°C - 395°C) and medium-low salinity (0.53% - 22.01%). Results of hydrogen-oxygen isotope analysis show that ore-forming fluid is mainly CO2-rich magmatic fluid, mixed with shallow groundwater or metamorphic hydrothermal in the late mineralization stages. Calculated metallogenic pressures are in the range of 79 - 130MPa corresponding to a maximum depth of 4.8 km. The Annage deposit is a mesothermal quartz vein type gold deposit.

Introduction to “Metallogenesis of Continental Collision”

There is a general consensus that Plate Tectonics can explain metallogenesis based on the collisions between oceanic and continental crust. For instance, the large-sized porphyry copper deposits that occur along the Cordillera of the Andes around the east coast of the Pacific, and in the Phillipines, Malaysia and Indonesia along the western coast of the Pacific that sit upon the massive Pacific plates. They are considered to be typical of deposits resulting from collision between the oceanic and continental crust. Many experts, however, have long held a negative view about whether the collision between continental crusts can lead to metallogenesis. In recent years, Chinese geologists have proposed a new concept for ＂Continent-Continent Collision Metallogenesis＂ after many years of studying in the Qinghai--Tibet Plateau. Here we give a brief introduction to this idea.

Geological Characteristics and Its Metallogenesis of Daolundaba Copper Polymetallic Deposits,Inner Mongolia

1 Geology Daolundaba copper polymetallic deposit occurs in West Ujimqin Banner,the Xilin Gol League of Inner Mongolia,along the west side of South part of Daxinganling ore belt,whose tectonic position just lies at the junction of Siberian Block in the south part,North China Block in the north and Songliao block in the east.The Daolundaba copper polymetallic deposit is hosted by the Lower Proterozoic Baoyintu group of biotite-plagioclase gneiss(Pt1by),upper Permian Linxi formation of sandy slate(P2l),and the Hercynian Qianjinchang pluton of biotite granite.

Metallogenesis and Geodynamic Setting of the Early Paleozoic Orogenic Gold Deposits in the North Altyn

The North Altyn has underwent a complex tectonic history in the Early Paleozoic and formed a number of orogenic gold deposits controlled by ductile to brittle shear zones adjacent to the southern side of the Northern Altyn Tagh fault e.g. the Dapinggou, Beiketan and Xiangyun. The Dapinggou gold deposit, a typical orogenic gold deposit in North Altyn, is predominantly hosted in the Precambrian carbonate and Cambrian volcano- sedimentary rocks which were strongly deformed and were subjected to low-grade metamorphism. The ore bodies occurred in K-feldspar quartz veins and hydrothermally altered mylonite within the ductile shear belt. Hydrothermal alteration including silicification, pyritization.

PRELIMINARY DISCUSSION ON METALLOGENESIS OF LANCANGJIANG RIVER TRANSITIONAL FIELD TECTONIC ZONE IN WESTERN YUNNAN

Applying the crustobody geotectonic theory to geological prospecting at the Lancangjiang river metallogenic belt in western Yunnan province, and on the basis of the basic geological background of western Yunnan and the space-time evolution-movement historical-dynamic features of the Lancangjiang river tectonic belt, the author has discussed firstly the metallogenesis of the Lancangjiang river transitional field tectonic zone, which can provide a new theoretical foundation for exploring the space-time laws of mineralization in this region.

Geochronology and geochemistry of magmatic rocks in the Dongzi–Changhanboluo Pb–Zn ore district in Chifeng,Inner Mongolia,and their relationship with metallogenesis

Bulk-rock elements,isotopes,and zircon U–Pb ages are reported for magmatic rocks in the Dongzi–Changhanboluo Pb–Zn ore district in Chifeng,Inner Mongolia,China.Zircon U–Pb dating identified four stages of magmatism:Late Silurian gabbroic diorite(*420 Ma),Middle Permian monzonite(*274 Ma),Late Jurassic quartz porphyry and ignimbrite,breccia tuff(153–158 Ma)and Early Cretaceous andesitic porphyrite(*127 Ma).Integrating field observations,geochronology,and element and isotope geochemistry indicated a complex petrogenetic history of the magmatic rocks.The gabbroic diorite may have been sourced from EM1-type mantle.The source of the monzonite may have been mantle metasomatized by melt from the subducting plate.The Jurassic volcaniclastic rocks formed in a medium-pressure,high-temperature environment,possibly in the background of crustal thickening in a syncollisional stage and an early postcollisional stage.During this process,shaly sedimentary rocks were brought into the deep crust and heated,followed by the rapid isostatic uplift of the crust,which caused partial melting of the sedimentary rocks.Quartz monzonite porphyry and quartz porphyry formed by partial melting of mantle metasomatized by subducted sediments,but the quartz porphyry experienced high-degree differentiation and evolution.The andesitic porphyrite has characteristics similar to those of Permian monzonite,indicating that its source area was also the zone of mantle metasomatized by subducted sediment.The late Silurian and Permian magmatic rocks in this area most likely formed against a continental arc background related to the subduction of the Paleo-Asian Ocean Plate beneath the North China Plate.The Late Jurassic magmatic rocks suggest that the northern margin of the North China Craton may have been in a postcollisional setting during the Late Jurassic,with no obvious crustal thinning.The Cretaceous andesitic porphyrite may have formed against the background of lithospheric extension and thinning.According to the comprehensive analysis of geological characteristics,diagenetic and metallogenic epochs,and Pb isotope data,the formation of ore bodies in the Dongzi–Changhanboluo ore district was closely related to the Jurassic quartz porphyry.

Classification,metallogenesis and exploration of silver deposits in Daxing’anling of Inner Mongolia and its adjacent areas

By the end of 2020,83 silver deposits(or ore occurrences),including four super-large-scale deposits,nine large-scale deposits,33 medium-scale deposits and 37 small-scale deposits or ore occurrences,have been proved.The amount of silver metal exceeds 86000 t with average grade of 100 g/t,which makes Daxing’anling region one of the the most important silver ore belt in China.However,the metallogenic characteristics and metallogenesis need to be clarified.The silver deposits in the study area are classified into three main types,which are magmatic hydrothermal vein type,continental volcano-subvolcanic type and skarn type,respectively.The supergiant deposits include the Shuangjianzishan deposit(silver metal amount of 15214 t with average grade of 138 g/t),the Baiyinchagandongshan deposit(silver metal amount of 9446 t with average grade of 187 g/t),the Huaobaote deposit(silver metal amount of 6852 t with average grade of 170 g/t),and the Fuxingtun deposit(silver metal amount of 5240 t with average grade of 196 g/t).The silver deposits are mainly distributed in the central and south of the Daxing’anling area,and mainly formed in the Yanshanian period.The silver polymetallic deposits in the Daxinganling area are significantly controlled by regional faults and the junction zone of volcanic rock basins and their margins.The north-east trending deep faults are the most important ore-controlling structures in this area.The distribution of silver polymetallic deposits along the main faults is obvious,and the intersection area of multiple groups of faults often form important mine catchments.The Permian is the most important ore-bearing formation in this area,but some important silver polymetallic deposits occur in Mesozoic volcanic basins or pre-Mesozoic strata.The magmatic rocks related to mineralization are mainly intermediate acidic or acidic intrusions,intermediate acidic lavas,pyroclastic rocks,and small intrusions of ultra-shallow or shallow facies of the Yanshanian Period.The mineralization element combination is mainly determined by the elemental geochemical background of surrounding rocks or source layers.In addition,the type of deposit,the distance from the mineralization center,and the degree of differentiation of ore-forming rock mass are also important influence factors.The article analyzes the prospecting prospects of each silver deposit type in the study area,discusses the relationship between mineralization center and deep prospecting,and proposes that porphyry silver deposits should be paid attention to.In the prospecting and exploration of silver deposits,comprehensive evaluation and multi-target prospecting need to be strengthened because silver can coexist or be associated with a variety of metals.

On the metallogenesis of Dajing Cu-Sn-polymetallic ore deposit,Inner Mongolia,China

The Dajing Cu-Sn-polymetallic ore deposit is famous for its large scale, abundant associated elements, narrow and closely-spaced development of ore veins and high grade, but exploration within the mining district and its deeper parts has revealed no Yanshanian rockbody. Therefore, there have been proposed a diversity of hypotheses on the genesis of the deposit. The authors, from the angle of mantle-branch structure, provided evidence showing that the mining district is located in the core of the Da Hinggan Ling mantle-branch structure, the multi-stage evolution of mantle plume paved the way for the ascending of deep-source ore fluids and these fluids extracted part of the ore-forming materials. Then, these ore-forming materials were concentrated in the favorable structural loci (e.g. structural fissures) to form ores. The orientation of ore-forming and ore-controlling fissures is closely related to the regionally structural stress field at the metallogenic stage. The zonation of Sn, Cu, Au, Ag, Pb, and Zn within the mining district appears to be related to metallogenesis and the crystallization temperature of ore-forming materials. Mineralization of Sn, Cu, Au, etc. which require relatively high crystallization temperature and pressure is in most cases recognized in the central part of the mining district, while that of Ag, Pb, Zn, etc. which require relatively low crystallization temperature and pressure is, for the most part, produced in the periphery of the mining district.

A PRELIMINARY STUDY ON METALLOGENESIS OF THE LAMASU COPPER POLYMETALLIC ORE DEPOSIT, XINJIANG

The Lamasu copper polymetallic mineralized region lies in the south of Wenquan County, Xinjiang and in the Northwest lakeside of the Sailimu Lake. Seen from the geotectonic position, it belongs to North Tianshan geodome system, Tianshan diwa region, Central Asian crustobody. Copper and zinc polymetallic ore bodies had been formed in the skarn of the contact, between the metamophic carbonate rocks of the Kuximqiek Group, Jixian System and early mid Varisean acidic rockbodies. The formation of the ore deposit was the result of the successive activities of the crust and mantle and the tectonic and magmatic activities.

Delineation of Integrated Anomaly with Generative Adversarial Networks and Deep Neural Networks in the Zhaojikou Pb-Zn Ore District,Southeast China

Geochemical maps are of great value in mineral exploration.Integrated geochemical anomaly maps provide comprehensive information about mapping assemblages of element concentrations to possible types of mineralization/ore,but vary depending on expert's knowledge and experience.This paper aims to test the capability of deep neural networks to delineate integrated anomaly based on a case study of the Zhaojikou Pb-Zn deposit,Southeast China.Three hundred fifty two samples were collected,and each sample consisted of 26 variables covering elemental composition,geological,and tectonic information.At first,generative adversarial networks were adopted for data augmentation.Then,DNN was trained on sets of synthetic and real data to identify an integrated anomaly.Finally,the results of DNN analyses were visualized in probability maps and compared with traditional anomaly maps to check its performance.Results showed that the average accuracy of the validation set was 94.76%.The probability maps showed that newly-identified integrated anomalous areas had a probability of above 75%in the northeast zones.It also showed that DNN models that used big data not only successfully recognized the anomalous areas identified on traditional geochemical element maps,but also discovered new anomalous areas,not picked up by the elemental anomaly maps previously.

Redetermination of the Depositional Age of the Haerdaban Group in the Northern Margin of the Yili Block,Western Tianshan,NW China:Implications for Regional Tectonics and Pb-Zn Mineralization

The Yili Block in the Western Tianshan orogen is a key area for understanding the early crustal formation and evolution of the Central Asian orogenic belt,due to the widely-distributed Precambrian rocks.Also,it hosts a lot of medium–to large-scale sedimentary exhalative(SEDEX)Pb-Zn deposits that mainly occur in Proterozoic metamorphosed clasticcarbonate rocks.In this study,LA-ICP-MS U-Pb analyses were carried out on detrital zircons in siltstones of the Precambrian Haerdaban Group in the Haerdaban Pb-Zn deposit and magmatic zircons in the diorite dyke that cuts through the strata and orebodies.The maximum depositional age of the siltstones was determined to be about 604 Ma,the diorite having formed at approximately 500 Ma.As such,the Haerdaban Group was most likely formed in the Neoproterozoic Sinian,rather than the previously considered Mesoproterozoic Changchengian.Detrital materials of the Haerdaban Group were mostly derived from the Nanhua–Sinian mafic dykes and granitic rocks around Lake Sayram at the northern margin of the Yili Block.It is proposed that the Yili Block,together with the Kazakhstan and Central Tianshan blocks and the Tarim Craton,might all pertain to the same Rodinia supercontinent,which has great potential for targeting large to super-large SEDEX Pb-Zn deposits.