REE abundances in sulfides from the Huize Zn-Pb ore field were determined with the ICPMS after preconcentration. The REE abundances in 26 sulfide samples (including pyrite, galena and sphalerite) are very low, with ...REE abundances in sulfides from the Huize Zn-Pb ore field were determined with the ICPMS after preconcentration. The REE abundances in 26 sulfide samples (including pyrite, galena and sphalerite) are very low, with the ~REE ranging from 1.6×10^-9 to 166.8×10^-9. Their LREE/HREE ratios range from 7.6 to 98, showing LREE enrichment relatively. The JEu values are below 1, indicating that they were deposited from an Eu-depleted and reducing fluid-system. Similar to the ore-hosting carbonate strata, calcite separates from carbonate veinlets filling in the fractures or faults crosscutting the carbonate strata also show clear Eu-depletion. This indicates that the carbonate veinlets and their parent fluid was possibly sourced from the strata and inherited the REE geochemical features of the strata. Therefore, REE-geochemical characteristics of both the sulfides and calcites, which were deposited from an ore-forming hydrothermal system, are similar to those of carbonate strata, and strongly suggest that the ore metals were mainly sourced from carbonate strata.展开更多
The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt (CAOB). The chemical and carbo...The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt (CAOB). The chemical and carbon isotopic compositions of the volatiles trapped in olivine, pyroxene and sulfide mineral separates were analyzed by vacuum stepwise-heating mass spectrometry. The results show that the released volatiles are concentrated at three temperature intervals of 200-400°C, 400-900°C and 900-1200°C. The released volatiles from silicate mineral separates at 400-900°C and 900-1200°C have similar chemical and carbon isotopic compositions, which are mainly composed of H2O (av. ~92 mol%) with minor H2, CO2, H2S and SO2, and they are likely associated with the ore-forming magmatic volatiles. Light δ13CCO2 values (from -20.86‰ to -12.85‰) of pyroxene indicate crustal contamination occurred prior to or synchronous with pyroxene crystallization of mantlederived ore-forming magma. The elevated contents of H2 and H2O in the olivine and pyroxene suggest a deep mantle-originated ore-forming volatile mixed with aqueous volatiles from recycled subducted slab. High contents of CO2 in the ore-forming magma volatiles led to an increase in oxygen fugacity, and thereby reduced the solubility of sulfur in the magma, then triggered sulfur saturation followed by sulfide melt segregation; CO2 contents correlated with Cu contents in the whole rocks suggest that a supercritical state of CO2 in the ore-forming magma system under high temperature and pressure conditions might play a key role in the assemblage of huge Cu and Ni elements. The volatiles released from constituent minerals of intrusion 1# have more CO2 and SO2 oxidized gases, higher CO2/CH4 and SO2/H2S ratios and lighter δ13CCO2 than those of intrusions 2# and 3#. This combination suggests that the higher oxidation state of the volatiles in intrusion 1# than intrusions 2# and 3#, which could be one of key ore-forming factors for large amounts of ores and high contents of Cu and Ni in intrusion 1#. The volatiles released at 200-400°C are dominated by H2O with minor CO2, N2+CO and SO2, with δ13CCO2 values (-25.66‰ to -22.98‰) within the crustal ranges, and are considered to be related to secondary tectonic-hydrothermal activities.展开更多
To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variatio...To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.展开更多
In order to investigate the effective control method of sp ontaneous com bustion in the mining of sulfide ore deposits. This paper presents the testing r esults of several selected chemicals (water glass, calcium chlo...In order to investigate the effective control method of sp ontaneous com bustion in the mining of sulfide ore deposits. This paper presents the testing r esults of several selected chemicals (water glass, calcium chloride, calcium oxi de, magnesium oxide and their composites) as oxidation suppressants for sulfide ores. A weight increment scaling method was used to measure suppressant performa nce, and this method proved to be accurate, simple and convenient. Based on a large number of experiments, the test results show that four types of chemical mixtures demonstrate a good performance in reducing the oxidation rate of seven active sulfide ore samples by up to 27% to 100% during an initial 76 d period. T he mixtures of water glass mixed with calcium chloride and magnesium oxide mixed with calcium chloride can also act as fire suppressants when used with fire spr inkling systems.展开更多
To inhibit the dissolution of Mg^2+ during the bioleaching process of high-magnesium nickel sulfide ore, the effect of major bioleaching factors on the dissolution of Mg^2+ from olivine and serpentine was investigated...To inhibit the dissolution of Mg^2+ during the bioleaching process of high-magnesium nickel sulfide ore, the effect of major bioleaching factors on the dissolution of Mg^2+ from olivine and serpentine was investigated and kinetics studies were carried out. The results indicated that the dissolution rate-controlling steps are chemical reaction for olivine and internal diffusion for serpentine. The most influential factor on the dissolution of Mg^2+ from olivine and serpentine was temperature, followed by p H and particle size. A novel method of bioleaching at elevated pH was used in the bioleaching of Jinchuan ore. The results showed that elevated pH could significantly reduce the dissolution of Mg^2+ and acid consumption along with slightly influencing the leaching efficiencies of nickel and cobalt. A model was used to explain the leaching behaviors of high-magnesium nickel sulfide ore in different bioleaching systems. The model suggested that olivine will be depleted eventually, whereas serpentine will remain because of the difference in the rate-controlling steps. Bioleaching at elevated pH is a suitable method for treating high-magnesium nickel sulfide ores.展开更多
This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore. Adding auxiliary agents 1# (sulfur) and 2# (pyrite) makes bacterial leaching of copper and acid produ...This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore. Adding auxiliary agents 1# (sulfur) and 2# (pyrite) makes bacterial leaching of copper and acid production carried out simultaneously because the auxiliary agents can be oxidized by bacteria and the oxidation products involve acid. The acid required for dissolving alkaline gangue during bacterial leaching is produced, and acid equilibrium is reached during the ore bio-leaching. The recovery of copper reaches more than 95%.展开更多
A model GM (grey model) (1,1) for forecasting the rate of copper extraction during the bioleaching of primary sulphide ore was established on the basis of the mathematical theory and the modeling process of grey s...A model GM (grey model) (1,1) for forecasting the rate of copper extraction during the bioleaching of primary sulphide ore was established on the basis of the mathematical theory and the modeling process of grey system theory. It was used for forecasting the rate of copper extraction from the primary sulfide ore during a laboratory microbial column leaching experiment. The precision of the forecasted results were examined and modified via "posterior variance examination". The results show that the forecasted values coincide with the experimental values. GM (1,1) model has high forecast accuracy; and it is suitable for simulation control and prediction analysis of the original data series of the processes that have grey characteristics, such as mining, metallurgical and mineral processing, etc. The leaching rate of such copper sulphide ore is low. The grey forecasting result indicates that the rate of copper extraction is approximately 20% even after leaching for six months.展开更多
The bioleaching of a low grade Ni Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobacillus thiooxidans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the ...The bioleaching of a low grade Ni Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobacillus thiooxidans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the pulp density and the ratio of TF5 and TT on leaching was described, and the favorable bioleaching conditions for the ore were experimentally confirmed. The aeration leaching, agitation leaching with air bubbling, and column leaching were respectively tested. The highest recovery was achieved in the aeration leaching. After leaching for 20?d with pulp density of 15%, the extractions of Ni, Cu and Co were respectively 95.4%, 48.6% and 82.6%.展开更多
Effects of residues produced by agricultural wastes fermentation(AWF)on low grade copper sulfide ores bioleaching,copper recovery,and microbial community were investigated.The results indicated that adding appropriate...Effects of residues produced by agricultural wastes fermentation(AWF)on low grade copper sulfide ores bioleaching,copper recovery,and microbial community were investigated.The results indicated that adding appropriate bulk of AWF made contributions to low grade copper sulfide ores bioleaching,which may be mainly realized through reducing the passivation layer formed by Fe3+hydrolysis.Improved copper recovery(78.35%)and bacteria concentration(9.56×10^(7)cells·mL^(−1))were yielded in the presence of 5 g·L^(−1)AWF.The result of 16S rDNA analysis demonstrated that microbial community was differentiated by adding AWF.Bacteria proportion,such as Acidithiobacillus ferrooxidans,Moraxella osloensis,and Lactobacillus acetotolerans changed distinctly.Great difference between samples was showed according to beta diversity index,and the maximum value reached 0.375.Acidithiobacillus ferrooxidans accounted for the highest proportion throughout the bioleaching process,and that of sample in the presence of 5 g·L^(−) AWF reached 28.63%.The results should show reference to application of agricultural wastes and low grade copper sulfide ores.展开更多
Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, w...Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, while 0.118% Cu, 1.65% Pb and 1.06% Zn may be comprehensively utilizated. The main silver-bearing minerals were argent and aregentite which accounted for 87.18% of total silver. Argentite and other metal minerals were distributed in the gangue minerals in complex forms. Argentite grains of 33.76% minus 50 μm indicated that a fine grinding scheme was necessary to enhance the degree of dissociation, and meanwhile selective grinding must be considered to prevent a complete grinding of coarse grains. The optimum regrinding fineness in the Cu flotation was determined as 73% minus 37 μm, while grains of 68.5% minus 74 μm in one-stage grinding remained unchanged as much as possible. Consequently, silver recovery increased to 2.68%, as well as the content of Pb simultaneously decreased from 7.26% to 2.68% in the Cu concentrate. From the lead pyrometallurgical point of view, recovering larger amounts of silver and lead at the expense of decreasing the grade of lead to a suitable level is not only economically viable for the plant, but also convenient for subsequent processing. Silver and lead recovery increased to 13.18% and 12.58%, respectively, while the Pb grade decreased from 53.1% to 46.12% for the Pb concentrate.展开更多
The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural...The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural trap. The mechanism has three major features: (1) timing of mineralization; (2) positioning of hostformation; and (3) dependence of ore-controlling structure on properties of rocks. The 'optimum surface' is adivisional structural plane which marks obvious difference in physical, chemical and mechanical properties andis favorable for mineralization. It is also a unity of structures. lithofacies and orebodies. The structural and geochemical characteristics of the ore deposits indicate the migration trend of the ma-jor characteristic clements in the ore-controlling fault belt: elements with a small radius (Si, Fe, Mg and Al)moved towards and concentrated at the center of the belt while large-radius ones (Ca, K and Na) were remotefrom the center.展开更多
A new technique for the flotation separation of lead zinc iron sulfide ores has been developed and applied to several mills in China. It is characterized by the matching of relationships among pulp pH, pulp potential,...A new technique for the flotation separation of lead zinc iron sulfide ores has been developed and applied to several mills in China. It is characterized by the matching of relationships among pulp pH, pulp potential, flotation collector inside grinding mill. The flotation separation of galena and sphalerite has been accomplished without the addition of any conventional depressant of sphalerite such as zinc sulphate. Lime is used as a regulator and stabilizer of pulp pH and potential. Diethyldithiocarbamate (DDTC), not xanthate, is determined as a collector for the selective flotation of galena from the Pb Zn Fe sulfide ores. The laboratory scale tests, the plant scale tests and the plant operations have all shown that the best separation results can be achieved at pH of 12.4~12.6, the pulp potential of 160~180 mV. The operation practice in the four plants has confirmed that compared with conventional flotation flowsheet, our new technology can greatly improve the flotation results, reduce the flotation time and the number of flotation cell, and increase the stability of operation and the adaptability to changes in ore properties. All these advantages have made this four plants more profitable.展开更多
The comprehensive recovery of small amounts of valuable minerals such as gold and base-metal sulfide minerals from a low-grade refractory ore was investigated. The following treatment strategy was applied to a sample ...The comprehensive recovery of small amounts of valuable minerals such as gold and base-metal sulfide minerals from a low-grade refractory ore was investigated. The following treatment strategy was applied to a sample of this ore: gold flotation-gold concen- trate leaching-lead and zinc flotation from the gold concentrate leaching residue. Closed-circuit trials of gold flotation yielded a gold concen- trate that assayed at 40.23 g·t-1 Au with a recovery of 86.25%. The gold concentrate leaching rate was 98.76%. Two variants of lead-zinc flotation from the residue--preferential flotation of lead and zinc and bulk flotation of lead and zinc--were tested using the middling processing method. Foam from the reflotation was returned to the lead rougher flotation or lead-zinc bulk flotation, whereas middlings from reflotation were discarded. Sulfur concentrate was a byproduct. The combined strategy of flotation, leaching, and flotation is recommended for the treatment of this kind of ore.展开更多
Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajector...Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajectory on the basis of the Na/Br and Cl/Br ratios. The average Cl/Br and Na/Br ratios of mineralizing fluids are 185 and 173 respectively, which are very close to the ratios (120 and 233) of the residual evaporated seawater past the point of halite precipitation. It is suggested that the original mineralizing brine was derived from highly evaporated seawater with a high salinity. However, the inclusion fluids have absolute Na values of \{69.9\}-\{2606.2\} mmol kg\+\{-1\} and Cl values of \{106.7\}-\{1995.5\} mmol kg\+\{-1\}. Most of the values are much less than those of seawater: Na, 485 mmol kg\+\{-1\} and Cl, 566 mmol kg\+\{-1\}, respectively; the salinity measured from fluid inclusions of the deposits ranges from \{2.47 wt%\} to \{15.78 wt%\} NaCl equiv. The mineralizing brine has been diluted. The \{δ\{\}\+\{18\}O\} and δD values of ore\|forming fluids vary from \{-8.21‰\} to \{9.51‰\} and from \{-40.3‰\} to \{-94.3‰\}, respectively. The δD values of meteoric water in this region varied from \{-80‰\} to \{-100‰\} during the Jurassic. This evidenced that the ore\|forming fluids are the mixture of seawater and meteoric water. Highly evaporated seawater was responsible for leaching and extracting Pb, Zn and Fe, and mixed with and diluted by descending meteoric water, which resulted in the formation of ores.展开更多
Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron,aluminum and magnesium powders was investigated for the first t...Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron,aluminum and magnesium powders was investigated for the first time.Also,the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail.The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.%and it was attributed to the possible existence of S\\O bonding on copper oxides surfaces.In addition,adding magnesium nitrate salt,magnesium powder,iron nitrate salt and aluminum powder as additive associated with 0.5 wt%sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%,0.2 wt%,0.5 wt%and 0.5 wt%,respectively.Also,the effect of grinding time and sulfidization pH with 0.5 wt%sulfur solely was determined and pH s of 7.5 to 8.5 gave the best results.The highest recovery(75.76%)and separation efficiency(63.44%)were achieved at pH of 7.5 and 8.5,respectively.展开更多
The reaction process for leaching gold from sulfide gold concentrates containing copperwith ammonia-ammonium thiosulfate solution containing copper(Ⅱ)can be divided into initialstage and later stage of reaction.Ini...The reaction process for leaching gold from sulfide gold concentrates containing copperwith ammonia-ammonium thiosulfate solution containing copper(Ⅱ)can be divided into initialstage and later stage of reaction.Initial stage of reaction is controlled by interface reaction.Lat-er stage of reaction is controlled by diffusion process of reaction through solid products layer.Whole leaching process is under the control of corrosion reaction of pyrite bearing gold.Actionof ammonium sulfate in the system is probably as follows:(1)NH<sub>4</sub><sup>+</sup> and NH<sub>3</sub> forms a buffer so-lution;(2)SO<sub>4</sub><sup>2-</sup>ion inhibites the oxidation and decomposition of S<sub>2</sub>O<sub>3</sub><sup>2-</sup>ion.Cu<sup>2+</sup>ion in thesystem acts as an oxidant and oxygen makes the Cu<sup>2-</sup>regenerate.展开更多
The origin of PGE—Cu—Ni sulfide deposits of Norilsk and Talnakh located in the northwest flank of the Triassic basalt trap formation of Siberia is considered.It is shown that ore elements of these deposits(probably...The origin of PGE—Cu—Ni sulfide deposits of Norilsk and Talnakh located in the northwest flank of the Triassic basalt trap formation of Siberia is considered.It is shown that ore elements of these deposits(probably,except Fe) are derived from the crust rather than from the mantle.They entered the basalts owing to a remobilization(recycling) of ore elements from the Paleoproterozoic sediments and from the rocks of the Siberian platform's basement.Prospecting criteria for similar deposits are as follows:(1) a presence of a large Paleoproterozoic aulacogen and a related magmatic sulfide Cu—Ni mineralization;(2) a confinement of perspective areas to troughs associated with long-lived deep fault zones:(3) association with mobile orogenic belts,island-arc systems and tectonomagmatic activation zones;(4) temporal association with boundaries of global periods characterized by active processes of continental breakup and large-scale trap magmatism.A combination of several factors(the first one is obligatory) is favorable for the discovery of a large ore body.展开更多
The Hongdonggou Pb-Zn polymetallic ore deposit, located in the southwestern part of the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore mineralization in Henan Province, China, is an important part of the East Qinling metall...The Hongdonggou Pb-Zn polymetallic ore deposit, located in the southwestern part of the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore mineralization in Henan Province, China, is an important part of the East Qinling metallogenic belt. The orebodies in the deposit, which are vein, bedded and lenticular, are mainly hosted in the syenite porphyry, and formed within the carbonate and clastic rocks of the Yuku and Qiumugou formations partially. The genesis of the deposit has previously been argued to be of hydrothermal-vein type or of skarn-hydrothermal type. In this study, we report the results of Rb-Sr isotopic dating based on sphalerites from the main orebody of the Hongdonggou Pb-Zn polymetallic ore deposit, which yield an isochron age of 135.7 ± 3.2 Ma, constraining the timing of mineralization as early Cretaceous. The age is close to those reported for the Pb-Zn deposits in the Luanchuan ore belt. The (87Sr/86Sr)i values of the sphalerites (0.71127± 0.00010) are lower than that of terrigenous silicates (0.720) and higher than the mantle (0.707), suggesting that the metallogenic components were mainly derived through crust-mantle mixing. Combining the results from this study with those from previous work, we propose that the Hongdonggou Pb-Zn polymetallic ore deposit is a hydrothermal-vein deposit associated with the early Cretaceous tectonothermal event, and the mineralization is controlled by NW- and near EW-trending faults in the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore concentration belt.展开更多
The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the hig...The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated.Carbonate minerals associated with Pb-Zn mineralization haveδ^(13)CV-PDB andδ^(18)OV-SMOW values ranging from−5.55‰to+1.35‰(mean value of−0.69‰;n=14)and+16.28‰to+25.05‰(mean value of+20.22‰;n=14),respectively.This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks.Theδ^(34)S values of sulfides range from+20.2‰to+36.8‰,with an average value of+30.0‰(n=27).These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate.The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384,and Na/Br molar ratios from 39 to 160(n=8).These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater(657 to 564),but are consistent with bittern brines through early halite precipitation.We propose that ore-forming fluids are mainly derived from evaporitic basin brines,which leached base metals from the basement and/or country rocks.The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sulfides by thermochemical sulfate reduction.展开更多
1 Geological Setting The Huayuan Pb-Zn ore field in Xiangxi is located in the southeastern margin of the Yangtze block and the mid-segment of the West Hunan-West Hubei metallogenic belt.The exposed stratum are the lower
基金This Project is supported by the National Natural Science Foundation (No. 40502011, 40372048 and 40425006).
文摘REE abundances in sulfides from the Huize Zn-Pb ore field were determined with the ICPMS after preconcentration. The REE abundances in 26 sulfide samples (including pyrite, galena and sphalerite) are very low, with the ~REE ranging from 1.6×10^-9 to 166.8×10^-9. Their LREE/HREE ratios range from 7.6 to 98, showing LREE enrichment relatively. The JEu values are below 1, indicating that they were deposited from an Eu-depleted and reducing fluid-system. Similar to the ore-hosting carbonate strata, calcite separates from carbonate veinlets filling in the fractures or faults crosscutting the carbonate strata also show clear Eu-depletion. This indicates that the carbonate veinlets and their parent fluid was possibly sourced from the strata and inherited the REE geochemical features of the strata. Therefore, REE-geochemical characteristics of both the sulfides and calcites, which were deposited from an ore-forming hydrothermal system, are similar to those of carbonate strata, and strongly suggest that the ore metals were mainly sourced from carbonate strata.
基金financially supported by NSF of China(Grant 41072056, 40772058, 91014003, 40534020 and40772062)Key Projects of China Geological Survey(1212011121092)MOE (311010)
文摘The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt (CAOB). The chemical and carbon isotopic compositions of the volatiles trapped in olivine, pyroxene and sulfide mineral separates were analyzed by vacuum stepwise-heating mass spectrometry. The results show that the released volatiles are concentrated at three temperature intervals of 200-400°C, 400-900°C and 900-1200°C. The released volatiles from silicate mineral separates at 400-900°C and 900-1200°C have similar chemical and carbon isotopic compositions, which are mainly composed of H2O (av. ~92 mol%) with minor H2, CO2, H2S and SO2, and they are likely associated with the ore-forming magmatic volatiles. Light δ13CCO2 values (from -20.86‰ to -12.85‰) of pyroxene indicate crustal contamination occurred prior to or synchronous with pyroxene crystallization of mantlederived ore-forming magma. The elevated contents of H2 and H2O in the olivine and pyroxene suggest a deep mantle-originated ore-forming volatile mixed with aqueous volatiles from recycled subducted slab. High contents of CO2 in the ore-forming magma volatiles led to an increase in oxygen fugacity, and thereby reduced the solubility of sulfur in the magma, then triggered sulfur saturation followed by sulfide melt segregation; CO2 contents correlated with Cu contents in the whole rocks suggest that a supercritical state of CO2 in the ore-forming magma system under high temperature and pressure conditions might play a key role in the assemblage of huge Cu and Ni elements. The volatiles released from constituent minerals of intrusion 1# have more CO2 and SO2 oxidized gases, higher CO2/CH4 and SO2/H2S ratios and lighter δ13CCO2 than those of intrusions 2# and 3#. This combination suggests that the higher oxidation state of the volatiles in intrusion 1# than intrusions 2# and 3#, which could be one of key ore-forming factors for large amounts of ores and high contents of Cu and Ni in intrusion 1#. The volatiles released at 200-400°C are dominated by H2O with minor CO2, N2+CO and SO2, with δ13CCO2 values (-25.66‰ to -22.98‰) within the crustal ranges, and are considered to be related to secondary tectonic-hydrothermal activities.
基金Projects(51304238,51534008)supported by the National Natural Science Foundation of ChinaProject(2015CX005)supported by Innovation Driven Plan of Central South University,China
文摘To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.
文摘In order to investigate the effective control method of sp ontaneous com bustion in the mining of sulfide ore deposits. This paper presents the testing r esults of several selected chemicals (water glass, calcium chloride, calcium oxi de, magnesium oxide and their composites) as oxidation suppressants for sulfide ores. A weight increment scaling method was used to measure suppressant performa nce, and this method proved to be accurate, simple and convenient. Based on a large number of experiments, the test results show that four types of chemical mixtures demonstrate a good performance in reducing the oxidation rate of seven active sulfide ore samples by up to 27% to 100% during an initial 76 d period. T he mixtures of water glass mixed with calcium chloride and magnesium oxide mixed with calcium chloride can also act as fire suppressants when used with fire spr inkling systems.
基金financially supported by the National Natural Science Foundation of China (Nos. 51574036 and 51404033)
文摘To inhibit the dissolution of Mg^2+ during the bioleaching process of high-magnesium nickel sulfide ore, the effect of major bioleaching factors on the dissolution of Mg^2+ from olivine and serpentine was investigated and kinetics studies were carried out. The results indicated that the dissolution rate-controlling steps are chemical reaction for olivine and internal diffusion for serpentine. The most influential factor on the dissolution of Mg^2+ from olivine and serpentine was temperature, followed by p H and particle size. A novel method of bioleaching at elevated pH was used in the bioleaching of Jinchuan ore. The results showed that elevated pH could significantly reduce the dissolution of Mg^2+ and acid consumption along with slightly influencing the leaching efficiencies of nickel and cobalt. A model was used to explain the leaching behaviors of high-magnesium nickel sulfide ore in different bioleaching systems. The model suggested that olivine will be depleted eventually, whereas serpentine will remain because of the difference in the rate-controlling steps. Bioleaching at elevated pH is a suitable method for treating high-magnesium nickel sulfide ores.
文摘This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore. Adding auxiliary agents 1# (sulfur) and 2# (pyrite) makes bacterial leaching of copper and acid production carried out simultaneously because the auxiliary agents can be oxidized by bacteria and the oxidation products involve acid. The acid required for dissolving alkaline gangue during bacterial leaching is produced, and acid equilibrium is reached during the ore bio-leaching. The recovery of copper reaches more than 95%.
基金supported by the National Key Basic Research and Development Programme of China(No.2004CB619200)the National Science Foundation for Distinguished Young Scholars of China(No.50325415)the National Natural Science Foundation of China(No.50321402).
文摘A model GM (grey model) (1,1) for forecasting the rate of copper extraction during the bioleaching of primary sulphide ore was established on the basis of the mathematical theory and the modeling process of grey system theory. It was used for forecasting the rate of copper extraction from the primary sulfide ore during a laboratory microbial column leaching experiment. The precision of the forecasted results were examined and modified via "posterior variance examination". The results show that the forecasted values coincide with the experimental values. GM (1,1) model has high forecast accuracy; and it is suitable for simulation control and prediction analysis of the original data series of the processes that have grey characteristics, such as mining, metallurgical and mineral processing, etc. The leaching rate of such copper sulphide ore is low. The grey forecasting result indicates that the rate of copper extraction is approximately 20% even after leaching for six months.
文摘The bioleaching of a low grade Ni Cu sulfide ore from Jinchuan Mine with Thiobacillus ferrooxidans (TF5) and Thiobacillus thiooxidans (TT) was investigated. The effect of pH, the initial cell numbers of bacteria, the pulp density and the ratio of TF5 and TT on leaching was described, and the favorable bioleaching conditions for the ore were experimentally confirmed. The aeration leaching, agitation leaching with air bubbling, and column leaching were respectively tested. The highest recovery was achieved in the aeration leaching. After leaching for 20?d with pulp density of 15%, the extractions of Ni, Cu and Co were respectively 95.4%, 48.6% and 82.6%.
基金financially supported by the Key Program of National Natural Science Foundation of China (Nos. 52034001 and 51734001)the Innovation Team in Key Fields of Ministry of Science and Technology of the People’s Republic of China (No. 2018RA400)+2 种基金the 111 Project (No. B20041)the Fundamental Research Funds for the Central Universities (No. FRF-TP-18-003C1)China Scholarship Council (No. 202006460037)
文摘Effects of residues produced by agricultural wastes fermentation(AWF)on low grade copper sulfide ores bioleaching,copper recovery,and microbial community were investigated.The results indicated that adding appropriate bulk of AWF made contributions to low grade copper sulfide ores bioleaching,which may be mainly realized through reducing the passivation layer formed by Fe3+hydrolysis.Improved copper recovery(78.35%)and bacteria concentration(9.56×10^(7)cells·mL^(−1))were yielded in the presence of 5 g·L^(−1)AWF.The result of 16S rDNA analysis demonstrated that microbial community was differentiated by adding AWF.Bacteria proportion,such as Acidithiobacillus ferrooxidans,Moraxella osloensis,and Lactobacillus acetotolerans changed distinctly.Great difference between samples was showed according to beta diversity index,and the maximum value reached 0.375.Acidithiobacillus ferrooxidans accounted for the highest proportion throughout the bioleaching process,and that of sample in the presence of 5 g·L^(−) AWF reached 28.63%.The results should show reference to application of agricultural wastes and low grade copper sulfide ores.
基金Funded by the National Natural Science Foundation of China(No.51374247)
文摘Based on the mineralogical characterization for the polymetallic sulfide ore, the way to improve silver recovery was studied. The results showed that silver was the most valuable metal whose grade was 448.82 g/t Ag, while 0.118% Cu, 1.65% Pb and 1.06% Zn may be comprehensively utilizated. The main silver-bearing minerals were argent and aregentite which accounted for 87.18% of total silver. Argentite and other metal minerals were distributed in the gangue minerals in complex forms. Argentite grains of 33.76% minus 50 μm indicated that a fine grinding scheme was necessary to enhance the degree of dissociation, and meanwhile selective grinding must be considered to prevent a complete grinding of coarse grains. The optimum regrinding fineness in the Cu flotation was determined as 73% minus 37 μm, while grains of 68.5% minus 74 μm in one-stage grinding remained unchanged as much as possible. Consequently, silver recovery increased to 2.68%, as well as the content of Pb simultaneously decreased from 7.26% to 2.68% in the Cu concentrate. From the lead pyrometallurgical point of view, recovering larger amounts of silver and lead at the expense of decreasing the grade of lead to a suitable level is not only economically viable for the plant, but also convenient for subsequent processing. Silver and lead recovery increased to 13.18% and 12.58%, respectively, while the Pb grade decreased from 53.1% to 46.12% for the Pb concentrate.
文摘The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural trap. The mechanism has three major features: (1) timing of mineralization; (2) positioning of hostformation; and (3) dependence of ore-controlling structure on properties of rocks. The 'optimum surface' is adivisional structural plane which marks obvious difference in physical, chemical and mechanical properties andis favorable for mineralization. It is also a unity of structures. lithofacies and orebodies. The structural and geochemical characteristics of the ore deposits indicate the migration trend of the ma-jor characteristic clements in the ore-controlling fault belt: elements with a small radius (Si, Fe, Mg and Al)moved towards and concentrated at the center of the belt while large-radius ones (Ca, K and Na) were remotefrom the center.
文摘A new technique for the flotation separation of lead zinc iron sulfide ores has been developed and applied to several mills in China. It is characterized by the matching of relationships among pulp pH, pulp potential, flotation collector inside grinding mill. The flotation separation of galena and sphalerite has been accomplished without the addition of any conventional depressant of sphalerite such as zinc sulphate. Lime is used as a regulator and stabilizer of pulp pH and potential. Diethyldithiocarbamate (DDTC), not xanthate, is determined as a collector for the selective flotation of galena from the Pb Zn Fe sulfide ores. The laboratory scale tests, the plant scale tests and the plant operations have all shown that the best separation results can be achieved at pH of 12.4~12.6, the pulp potential of 160~180 mV. The operation practice in the four plants has confirmed that compared with conventional flotation flowsheet, our new technology can greatly improve the flotation results, reduce the flotation time and the number of flotation cell, and increase the stability of operation and the adaptability to changes in ore properties. All these advantages have made this four plants more profitable.
基金financially supported by the National Natural Science Foundation of China (No. 51504031)
文摘The comprehensive recovery of small amounts of valuable minerals such as gold and base-metal sulfide minerals from a low-grade refractory ore was investigated. The following treatment strategy was applied to a sample of this ore: gold flotation-gold concen- trate leaching-lead and zinc flotation from the gold concentrate leaching residue. Closed-circuit trials of gold flotation yielded a gold concen- trate that assayed at 40.23 g·t-1 Au with a recovery of 86.25%. The gold concentrate leaching rate was 98.76%. Two variants of lead-zinc flotation from the residue--preferential flotation of lead and zinc and bulk flotation of lead and zinc--were tested using the middling processing method. Foam from the reflotation was returned to the lead rougher flotation or lead-zinc bulk flotation, whereas middlings from reflotation were discarded. Sulfur concentrate was a byproduct. The combined strategy of flotation, leaching, and flotation is recommended for the treatment of this kind of ore.
基金ThisresearchprojectwasfundedbytheNationalNaturalScienceFoundationofChina (No .4 0 1 72 0 39)
文摘Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajectory on the basis of the Na/Br and Cl/Br ratios. The average Cl/Br and Na/Br ratios of mineralizing fluids are 185 and 173 respectively, which are very close to the ratios (120 and 233) of the residual evaporated seawater past the point of halite precipitation. It is suggested that the original mineralizing brine was derived from highly evaporated seawater with a high salinity. However, the inclusion fluids have absolute Na values of \{69.9\}-\{2606.2\} mmol kg\+\{-1\} and Cl values of \{106.7\}-\{1995.5\} mmol kg\+\{-1\}. Most of the values are much less than those of seawater: Na, 485 mmol kg\+\{-1\} and Cl, 566 mmol kg\+\{-1\}, respectively; the salinity measured from fluid inclusions of the deposits ranges from \{2.47 wt%\} to \{15.78 wt%\} NaCl equiv. The mineralizing brine has been diluted. The \{δ\{\}\+\{18\}O\} and δD values of ore\|forming fluids vary from \{-8.21‰\} to \{9.51‰\} and from \{-40.3‰\} to \{-94.3‰\}, respectively. The δD values of meteoric water in this region varied from \{-80‰\} to \{-100‰\} during the Jurassic. This evidenced that the ore\|forming fluids are the mixture of seawater and meteoric water. Highly evaporated seawater was responsible for leaching and extracting Pb, Zn and Fe, and mixed with and diluted by descending meteoric water, which resulted in the formation of ores.
基金the AbbasAbad copper mineShahrood University of Technology for their financial support during this research。
文摘Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron,aluminum and magnesium powders was investigated for the first time.Also,the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail.The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.%and it was attributed to the possible existence of S\\O bonding on copper oxides surfaces.In addition,adding magnesium nitrate salt,magnesium powder,iron nitrate salt and aluminum powder as additive associated with 0.5 wt%sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%,0.2 wt%,0.5 wt%and 0.5 wt%,respectively.Also,the effect of grinding time and sulfidization pH with 0.5 wt%sulfur solely was determined and pH s of 7.5 to 8.5 gave the best results.The highest recovery(75.76%)and separation efficiency(63.44%)were achieved at pH of 7.5 and 8.5,respectively.
基金Supported by the National Nature Science Foundation of China
文摘The reaction process for leaching gold from sulfide gold concentrates containing copperwith ammonia-ammonium thiosulfate solution containing copper(Ⅱ)can be divided into initialstage and later stage of reaction.Initial stage of reaction is controlled by interface reaction.Lat-er stage of reaction is controlled by diffusion process of reaction through solid products layer.Whole leaching process is under the control of corrosion reaction of pyrite bearing gold.Actionof ammonium sulfate in the system is probably as follows:(1)NH<sub>4</sub><sup>+</sup> and NH<sub>3</sub> forms a buffer so-lution;(2)SO<sub>4</sub><sup>2-</sup>ion inhibites the oxidation and decomposition of S<sub>2</sub>O<sub>3</sub><sup>2-</sup>ion.Cu<sup>2+</sup>ion in thesystem acts as an oxidant and oxygen makes the Cu<sup>2-</sup>regenerate.
文摘The origin of PGE—Cu—Ni sulfide deposits of Norilsk and Talnakh located in the northwest flank of the Triassic basalt trap formation of Siberia is considered.It is shown that ore elements of these deposits(probably,except Fe) are derived from the crust rather than from the mantle.They entered the basalts owing to a remobilization(recycling) of ore elements from the Paleoproterozoic sediments and from the rocks of the Siberian platform's basement.Prospecting criteria for similar deposits are as follows:(1) a presence of a large Paleoproterozoic aulacogen and a related magmatic sulfide Cu—Ni mineralization;(2) a confinement of perspective areas to troughs associated with long-lived deep fault zones:(3) association with mobile orogenic belts,island-arc systems and tectonomagmatic activation zones;(4) temporal association with boundaries of global periods characterized by active processes of continental breakup and large-scale trap magmatism.A combination of several factors(the first one is obligatory) is favorable for the discovery of a large ore body.
基金supported by the National Science and Technology Support Project of the 12th"Five-Year Plan"(Grant No.2011BAB04B06)the Fundamental Research Funds for the Central Universities of China University of Geosciences,Beijing(Grant No.2-9-2012-143)the National Natural Science Foundation of China(Grant No.41572318)
文摘The Hongdonggou Pb-Zn polymetallic ore deposit, located in the southwestern part of the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore mineralization in Henan Province, China, is an important part of the East Qinling metallogenic belt. The orebodies in the deposit, which are vein, bedded and lenticular, are mainly hosted in the syenite porphyry, and formed within the carbonate and clastic rocks of the Yuku and Qiumugou formations partially. The genesis of the deposit has previously been argued to be of hydrothermal-vein type or of skarn-hydrothermal type. In this study, we report the results of Rb-Sr isotopic dating based on sphalerites from the main orebody of the Hongdonggou Pb-Zn polymetallic ore deposit, which yield an isochron age of 135.7 ± 3.2 Ma, constraining the timing of mineralization as early Cretaceous. The age is close to those reported for the Pb-Zn deposits in the Luanchuan ore belt. The (87Sr/86Sr)i values of the sphalerites (0.71127± 0.00010) are lower than that of terrigenous silicates (0.720) and higher than the mantle (0.707), suggesting that the metallogenic components were mainly derived through crust-mantle mixing. Combining the results from this study with those from previous work, we propose that the Hongdonggou Pb-Zn polymetallic ore deposit is a hydrothermal-vein deposit associated with the early Cretaceous tectonothermal event, and the mineralization is controlled by NW- and near EW-trending faults in the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore concentration belt.
基金financially supported by the Geological Survey Program of China Geological Survey Bureau(Grant No.12120114016601)。
文摘The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated.Carbonate minerals associated with Pb-Zn mineralization haveδ^(13)CV-PDB andδ^(18)OV-SMOW values ranging from−5.55‰to+1.35‰(mean value of−0.69‰;n=14)and+16.28‰to+25.05‰(mean value of+20.22‰;n=14),respectively.This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks.Theδ^(34)S values of sulfides range from+20.2‰to+36.8‰,with an average value of+30.0‰(n=27).These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate.The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384,and Na/Br molar ratios from 39 to 160(n=8).These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater(657 to 564),but are consistent with bittern brines through early halite precipitation.We propose that ore-forming fluids are mainly derived from evaporitic basin brines,which leached base metals from the basement and/or country rocks.The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sulfides by thermochemical sulfate reduction.
基金financially supported jointly by the Monoblock Exploration from China Geological Survey (No. 12120114052201)the Independent Innovation Program for Doctoral Candidates of Central South University (No. 2015zzts069)the Foundation from Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring, Ministry of Education
文摘1 Geological Setting The Huayuan Pb-Zn ore field in Xiangxi is located in the southeastern margin of the Yangtze block and the mid-segment of the West Hunan-West Hubei metallogenic belt.The exposed stratum are the lower