Despite its significance in both fundamental science and industrial applications,the glass-forming tran-sition in the Al_(2)O_(3)-Y_(2)O_(3)(AY)refractory system is not yet fully understood due to the elusive structur...Despite its significance in both fundamental science and industrial applications,the glass-forming tran-sition in the Al_(2)O_(3)-Y_(2)O_(3)(AY)refractory system is not yet fully understood due to the elusive structure evolution upon cooling.Here,atomic-scale structural changes in AY-bearing melts with different compo-sitions and temperatures are tracked by employing in situ high-energy synchrotron X-ray diffraction and empirical potential structure refinement simulation.We find that the glass-forming abilities(GFA)of AY-bearing melts are intriguingly correlated with the dependence of melt structure on temperature.In the case of the Al_(2)O_(3)and Y_(3)A_(l5)O_(12)(YAG),the observed large structural changes from superheating to under-cooling melt(i.e.,higher temperature susceptibility)correspond to a low GFA.Conversely,the 74Al_(2)O_(3)-26Y_(2)O_(3)(AY26)melt,with the smallest temperature susceptibility,exhibits the highest GFA.Simulation models illustrate that the temperature susceptibility of melt is associated with its atomic arrangement,especially the stability of cation-cation pairs.A balanced network(in AY26 melt),where the unsteady OAl3 tri-clusters are minimized and steady apex-to-apex connections between adjacent network units are abundant,contributes to stabilizing cationic interactions.This,in turn,fosters the formation of large-sized Al-O-Al rings,which topologically facilitates the subsequent glass-forming transition.Our findings provide new structural insight into the GFA of AY-bearing melts and may expand to other unconventional glass-forming systems to accelerate glassy materials design.展开更多
The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2（CMAS） glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry（DSC）.The structure and phase analyse...The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2（CMAS） glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry（DSC）.The structure and phase analyses were made by Fourier transform infrared spectroscopy（FT-IR） and X-ray diffraction（XRD）.The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T（T=Si,Fe,Al） linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.展开更多
The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum and rare earth contents was also discussed. The spectra of ...The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum and rare earth contents was also discussed. The spectra of BASP glasses were measured by spectrophotometer. The results show that the forming regions will shrink with the increase of Al2O3 and it is difficult to form glass when [PO4]/[AlO4] < 2. The forming regions tend to be a closed elliptical, and the intensity of characteristic absorption peak increases gradually with the increase of Sm2O3, the absorption lines broadens non-uniformly and there is approximate linear relation between optical density at the 1064 nm wavelength and Sm2O3 content.展开更多
Bi2O3-ZnO-B2O3 system glass is a kind of lead-free low melting sealing glasses. The structure of Bi2O3-ZnO-B2O3 system low-melting sealing glass was investigated by DSC, FT-IR, XRD and SEM. The results show that with ...Bi2O3-ZnO-B2O3 system glass is a kind of lead-free low melting sealing glasses. The structure of Bi2O3-ZnO-B2O3 system low-melting sealing glass was investigated by DSC, FT-IR, XRD and SEM. The results show that with the increase of B2O3 content, the transition temperature Tg and softening temperature Tf of Bi2O3-ZnO-B2O3 system low-melting sealing glasses increase, which leads to the liquid phase precipitation temperature increasing and promotes the structure stability in the glass. With increasing the heat treatment temperature, a large number of liquid phases appear in samples and the sinter efficiency of the samples increases. The FT-IR spectra of the glasses show the presence of some bands that are assigned to vibrations of Bi--O bond from [BO3] pyramidal and [BiO6] octahedral units and B--O from [BO3] and [BO4] units. With the decrease of B203 content, the crystallization tendency of the glass increases. In glass samples Bl and B〉 crystallization starts at 460 ℃ and 540 ℃, respectively. Both of them precipitate Bi24B2O39 phases.展开更多
Through measuring the coefficient of linear expansion, the structure and properties of the Li2O-Al2O3-SiO2 low expansion glass ceramics containing B2O3 are studied by JR and XRD. It is shoutn that the IR method is eff...Through measuring the coefficient of linear expansion, the structure and properties of the Li2O-Al2O3-SiO2 low expansion glass ceramics containing B2O3 are studied by JR and XRD. It is shoutn that the IR method is efficient in the study of the glass-ceramics structure. There is a " Boron abnormality" in the system which has an important influence on the properties of the glass-ceramics.展开更多
The oxidation state of sulfur is detected in Na20-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure （XANES） spectra at the sulfur K edge. The measured spectra show the only presence ...The oxidation state of sulfur is detected in Na20-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure （XANES） spectra at the sulfur K edge. The measured spectra show the only presence of S^6＋ in the Na20-CaO-SiO2 float glass and the oxidation state of sulfur do not change with the increase of glass depth. It is also found that, after the melt has gone through the molten tin bath, the S^6＋ is the dominant species, but S^2- is also present on both surfaces. It is not certain whether cation bonds to S^2- or not, because there are many cations dissolved in the melted tin which makes the spectrum complicated.展开更多
In this experiment, strontium borate glasses were prepared using the conventional quenching method in air atmosphere. Optical absorption, photoluminescence excitation and emission spectra, X-ray excited luminescence ...In this experiment, strontium borate glasses were prepared using the conventional quenching method in air atmosphere. Optical absorption, photoluminescence excitation and emission spectra, X-ray excited luminescence （XEL）, and luminescence decay curve of the as-prepared glasses were investigated at room temperature. The as-prepared glasses had two kinds of Eu ions, i.e., Eu^2＋ and Eu^2＋. Compared with the reported results of strontium borate glasses, Eu^2＋ luminescence was enhanced in the studied strontium borate glasses coprepared with F^- and Li^＋ ions. The coexisting of Li^＋ or F^- in the borate glasses could create more negative defect Vsr″ and stabilize Eu^2＋ ions, which might act as donor of electrons; For the F^- doping, the new center of B（O, F）4 （or BO3F） and BO2F2 units could be considered to be the distorted （BO4）, which were needed as a rigid framework to stabilize the divalent rare earth ions.展开更多
Bright long afterglow phosphorescence glasses were prepared by using SrAl2O4： Eu^2＋, Dy^3＋ phosphors and suitable glass frits together. The SrAl2O4： Eu^2＋, Dy^3＋ phosphors were initially prepared by the solid re...Bright long afterglow phosphorescence glasses were prepared by using SrAl2O4： Eu^2＋, Dy^3＋ phosphors and suitable glass frits together. The SrAl2O4： Eu^2＋, Dy^3＋ phosphors were initially prepared by the solid reaction method. Three kinds of glass frits were prepared to match the SrAl2O4： Eu^2＋, Dy^3＋ phosphors. Effects of the compositions of the glass frits, the ratios of the phosphors to the frits us well us the firing temperature and firing times on the properties of the samples were discussed. XRD analysis indicated the samples exhibited the typical diffraction peaks of SrAlwO4： Eu^2＋, Dy^3＋. The emission spectra of the samples showed broad bands peaking at 510nm.The excitation spectra of the samples showed broad bands ranging from 300 to 480hm. These are believed due to the 5d4f-4f transitions of Eu^2＋ in the SrAl2O4： Eu^2＋, Dy^3＋ phosphors. The afterglow luminescence of the samples excited by a 40W fluorescence lamp for 30min can be observed in the dark for more lOh with the naked eyes. It can find wide applications in many fields.展开更多
The 40Bi2O3-30B2O3-(30-x)ZnO-xSrO (x=0-15mol%,BBZSr) glass system was prepared by the conventional melt quenching method.The effect of SrO addition on structure,thermal properties,chemical stability and sealing perfor...The 40Bi2O3-30B2O3-(30-x)ZnO-xSrO (x=0-15mol%,BBZSr) glass system was prepared by the conventional melt quenching method.The effect of SrO addition on structure,thermal properties,chemical stability and sealing performance of BBZSr glass were investigated thoroughly.The experimental results show that the total proportions of [BO3] group and [BO4] group decrease and the vibrations of [BiO3] group and [BiO6] group become weaker with the increase of SrO addition content,suggesting the glass network structure is strengthened owing to the SrO addition.Hence,both the thermal and chemical stability were significantly improved as the SrO content was increased.When the SrO content increased from 0 to 15mol%,the glass transition temperature and softening temperature slightly increased from 380 to 388 ℃ and from 392.7 to 402.2 ℃,respectively,meanwhile the coefficient of thermal expansion also increased from 10.49×10^-6 to 11.16×10^-6/℃ (30-300 ℃).The BBZSr glass with 15mol% SrO exhibited excellent comprehensive properties with low glass transition temperature(384.9 ℃),low softening temperature(400.3 ℃),high coefficient of thermal expansion (11.14×10^-6 ℃,30-300 ℃),good thermal and chemical stability.Besides,the glass had the good wetting behavior and sealing performance for Al-50%Si alloy.展开更多
The effects of Al2O3 addition on both the sintering behavior and microwave dielectric properties of PbO-B203-SiO2 glass ceramics were investigated by Fourier transform infrared spectroscope （FTIR）, differential ther...The effects of Al2O3 addition on both the sintering behavior and microwave dielectric properties of PbO-B203-SiO2 glass ceramics were investigated by Fourier transform infrared spectroscope （FTIR）, differential thermal analysis （DTA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results show that with the increase of Al2O3 content the bands assigned to [SiO4] nearly disappear. Aluminum replaces silicon in the glass network, which is helpful for the formation of boron-oxygen rings. The increase of the transition temperature Tg and softening temperature Tf of PbO-B2O3-SiO2 glass ceramics leads to the increase of liquid phase precipitation temperature and promotes the structure stability in the glasses, and consequently contributes to the decreasing trend of crystallization. Densification and dielectric constants increase with the increase of Al2O3 content, but the dielectric loss is worsened. By contrast, the 3% （mass fraction） Al2O3-doped glass ceramics sintered at 725℃ have better properties of density p=2.72 g/cm3, dielectric constant Er=6.78, dielectric loss tan8=2.6×10^-3 （measured at 9.8 GHz）, which suggest that the glass ceramics can be applied in multilayer microwave devices requiring low sintering temperatures.展开更多
CaO-B203-SiO2 （CBS） glass powders are prepared by conventional glass melting method at different melting temperatures whose properties and microstructures are characterized by X-ray diffraction （XRD） and scanning ...CaO-B203-SiO2 （CBS） glass powders are prepared by conventional glass melting method at different melting temperatures whose properties and microstructures are characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. It is found that there are SiO2 and some unknown phases in CBS glass melting liquid from 1 300 ℃ to 1 500 ℃ and the amount of these phases decreases with the increase of the melting temperature. The CBS glass melted at 1 450 ℃ could be sintered from 830 ℃ to 930 ℃ and the bulk densities of the samples are all higher than 2.4 g/cm^3. From the points of the properties and energy conservation, the melting temperature of 1 450 ℃ is the optimal melting temperature. The glass ceramic sintered at 850 ℃ exhibits better dielectric properties： er=6.33, tan6=2.2×10^-3 at 10 GHz, and the major phases of the samples are CaSiO3, CaB2O4 and SiO2.展开更多
CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets wit...CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets with different molar ratio of CeO2 to TiO2 （CeO2：TiO2-0：1.0; 0.1：0.9; 0.2：0.8; 0.3：0.7; 0.4：0.6; 0.5：0.5; 0.6：0.4; 0.7：0.3; 0.8：0.2; 0.9：0.1; 1.0：0）. The films are characterized by UV-visible transmission and infrared reflection spectra, scanning electron microscopy （SEM）, Raman spectroscopy, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The obtained results show that the amorphous phases composed of CeO2-TiO2 play an important role in absorbing UV, there are Ce^3-, Ce^4- and Ti^4- on the surface of the films; the glass substrates coated with CeO2-TiO2 （Ce/Ti=0.5：0.5; 0.6：0.4）/SnO2：Sb（6 mol%） double films show high absorbing UV（〉99）, high visible light transmission （75%） and good infrared reflection （〉70%）. The sheet resistance of the films is 30-50 Ω/□. The glass substrates coated with the double functional films can be used as window glass of buildings, automobile and so on.展开更多
基金supported by the National Natural Science Foundation of China-Key Program(No.52234010)National Natural Science Foundation of China(No.51971138)+2 种基金National Natural Science Foundation of China-Distinguished Young Scholars(No.52325407)National Key Basic Research Program of China(No.2020YFA0406101)the fund of the State Key Laboratory of Solidification Processing in NWPU(No.SKLSP202102).
文摘Despite its significance in both fundamental science and industrial applications,the glass-forming tran-sition in the Al_(2)O_(3)-Y_(2)O_(3)(AY)refractory system is not yet fully understood due to the elusive structure evolution upon cooling.Here,atomic-scale structural changes in AY-bearing melts with different compo-sitions and temperatures are tracked by employing in situ high-energy synchrotron X-ray diffraction and empirical potential structure refinement simulation.We find that the glass-forming abilities(GFA)of AY-bearing melts are intriguingly correlated with the dependence of melt structure on temperature.In the case of the Al_(2)O_(3)and Y_(3)A_(l5)O_(12)(YAG),the observed large structural changes from superheating to under-cooling melt(i.e.,higher temperature susceptibility)correspond to a low GFA.Conversely,the 74Al_(2)O_(3)-26Y_(2)O_(3)(AY26)melt,with the smallest temperature susceptibility,exhibits the highest GFA.Simulation models illustrate that the temperature susceptibility of melt is associated with its atomic arrangement,especially the stability of cation-cation pairs.A balanced network(in AY26 melt),where the unsteady OAl3 tri-clusters are minimized and steady apex-to-apex connections between adjacent network units are abundant,contributes to stabilizing cationic interactions.This,in turn,fosters the formation of large-sized Al-O-Al rings,which topologically facilitates the subsequent glass-forming transition.Our findings provide new structural insight into the GFA of AY-bearing melts and may expand to other unconventional glass-forming systems to accelerate glassy materials design.
基金Projects(51264023,51364020,U1202271)supported by the National Natural Science Foundation of ChinaProject(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of ChinaProject(2014HA003)supported by the Science and Technology Leading Talent of Yunnan Province,China
文摘The crystallization behavior and kinetics of CaO-MgO-Al2O3 SiO2（CMAS） glass with the Fe2O3 content ranging from zero to 5%were investigated by differential scanning calorimetry（DSC）.The structure and phase analyses were made by Fourier transform infrared spectroscopy（FT-IR） and X-ray diffraction（XRD）.The experiment results show that the endothermic peak temperature about 760℃ is associated with transition and the exothermic peak temperature about 1000℃ is associated with crystallization.The crystallization peak temperature decreases with increasing the Fe203 content.The crystallization mechanism is changed from two-dimensional crystallization to one-dimensional growth,and the intensity of diopside peaks becomes stronger gradually.There is a saltation for the crystallization temperature with the addition of 0.5%Fe2O3 due to the decomposition of Fe2O3.Si-O-Si,O-Si-O and T-O-T（T=Si,Fe,Al） linkages are observed in Fe2O3-CaO-MgO-Al2O3-SiO2 glass.
基金Project supported by Research Project (A3820060136)
文摘The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum and rare earth contents was also discussed. The spectra of BASP glasses were measured by spectrophotometer. The results show that the forming regions will shrink with the increase of Al2O3 and it is difficult to form glass when [PO4]/[AlO4] < 2. The forming regions tend to be a closed elliptical, and the intensity of characteristic absorption peak increases gradually with the increase of Sm2O3, the absorption lines broadens non-uniformly and there is approximate linear relation between optical density at the 1064 nm wavelength and Sm2O3 content.
基金Project(50272043) supported by the National Natural Science Foundation of China
文摘Bi2O3-ZnO-B2O3 system glass is a kind of lead-free low melting sealing glasses. The structure of Bi2O3-ZnO-B2O3 system low-melting sealing glass was investigated by DSC, FT-IR, XRD and SEM. The results show that with the increase of B2O3 content, the transition temperature Tg and softening temperature Tf of Bi2O3-ZnO-B2O3 system low-melting sealing glasses increase, which leads to the liquid phase precipitation temperature increasing and promotes the structure stability in the glass. With increasing the heat treatment temperature, a large number of liquid phases appear in samples and the sinter efficiency of the samples increases. The FT-IR spectra of the glasses show the presence of some bands that are assigned to vibrations of Bi--O bond from [BO3] pyramidal and [BiO6] octahedral units and B--O from [BO3] and [BO4] units. With the decrease of B203 content, the crystallization tendency of the glass increases. In glass samples Bl and B〉 crystallization starts at 460 ℃ and 540 ℃, respectively. Both of them precipitate Bi24B2O39 phases.
文摘Through measuring the coefficient of linear expansion, the structure and properties of the Li2O-Al2O3-SiO2 low expansion glass ceramics containing B2O3 are studied by JR and XRD. It is shoutn that the IR method is efficient in the study of the glass-ceramics structure. There is a " Boron abnormality" in the system which has an important influence on the properties of the glass-ceramics.
基金Funded by the National Natural Science Foundation of China(No.50972136)
文摘The oxidation state of sulfur is detected in Na20-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure （XANES） spectra at the sulfur K edge. The measured spectra show the only presence of S^6＋ in the Na20-CaO-SiO2 float glass and the oxidation state of sulfur do not change with the increase of glass depth. It is also found that, after the melt has gone through the molten tin bath, the S^6＋ is the dominant species, but S^2- is also present on both surfaces. It is not certain whether cation bonds to S^2- or not, because there are many cations dissolved in the melted tin which makes the spectrum complicated.
基金Jiangsu Provincial Natural Science Foundation of China (BK-2007053) the Second Stage of Brain Korea 21 Project Corporations at Changwon National University
文摘In this experiment, strontium borate glasses were prepared using the conventional quenching method in air atmosphere. Optical absorption, photoluminescence excitation and emission spectra, X-ray excited luminescence （XEL）, and luminescence decay curve of the as-prepared glasses were investigated at room temperature. The as-prepared glasses had two kinds of Eu ions, i.e., Eu^2＋ and Eu^2＋. Compared with the reported results of strontium borate glasses, Eu^2＋ luminescence was enhanced in the studied strontium borate glasses coprepared with F^- and Li^＋ ions. The coexisting of Li^＋ or F^- in the borate glasses could create more negative defect Vsr″ and stabilize Eu^2＋ ions, which might act as donor of electrons; For the F^- doping, the new center of B（O, F）4 （or BO3F） and BO2F2 units could be considered to be the distorted （BO4）, which were needed as a rigid framework to stabilize the divalent rare earth ions.
基金supported by the Jilin Provincial Natural Science Foundation of China(No.20040506-1).
文摘Bright long afterglow phosphorescence glasses were prepared by using SrAl2O4： Eu^2＋, Dy^3＋ phosphors and suitable glass frits together. The SrAl2O4： Eu^2＋, Dy^3＋ phosphors were initially prepared by the solid reaction method. Three kinds of glass frits were prepared to match the SrAl2O4： Eu^2＋, Dy^3＋ phosphors. Effects of the compositions of the glass frits, the ratios of the phosphors to the frits us well us the firing temperature and firing times on the properties of the samples were discussed. XRD analysis indicated the samples exhibited the typical diffraction peaks of SrAlwO4： Eu^2＋, Dy^3＋. The emission spectra of the samples showed broad bands peaking at 510nm.The excitation spectra of the samples showed broad bands ranging from 300 to 480hm. These are believed due to the 5d4f-4f transitions of Eu^2＋ in the SrAl2O4： Eu^2＋, Dy^3＋ phosphors. The afterglow luminescence of the samples excited by a 40W fluorescence lamp for 30min can be observed in the dark for more lOh with the naked eyes. It can find wide applications in many fields.
基金the Open Project Program of Key Laboratory of Inorganic Functional Materials and Devices,Chinese Academy of Sciences(No.KLIFMD-2018-06)。
文摘The 40Bi2O3-30B2O3-(30-x)ZnO-xSrO (x=0-15mol%,BBZSr) glass system was prepared by the conventional melt quenching method.The effect of SrO addition on structure,thermal properties,chemical stability and sealing performance of BBZSr glass were investigated thoroughly.The experimental results show that the total proportions of [BO3] group and [BO4] group decrease and the vibrations of [BiO3] group and [BiO6] group become weaker with the increase of SrO addition content,suggesting the glass network structure is strengthened owing to the SrO addition.Hence,both the thermal and chemical stability were significantly improved as the SrO content was increased.When the SrO content increased from 0 to 15mol%,the glass transition temperature and softening temperature slightly increased from 380 to 388 ℃ and from 392.7 to 402.2 ℃,respectively,meanwhile the coefficient of thermal expansion also increased from 10.49×10^-6 to 11.16×10^-6/℃ (30-300 ℃).The BBZSr glass with 15mol% SrO exhibited excellent comprehensive properties with low glass transition temperature(384.9 ℃),low softening temperature(400.3 ℃),high coefficient of thermal expansion (11.14×10^-6 ℃,30-300 ℃),good thermal and chemical stability.Besides,the glass had the good wetting behavior and sealing performance for Al-50%Si alloy.
基金Project(2007AA03Z0455) supported by the National High Technology Research and Development Program of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institution, China
文摘The effects of Al2O3 addition on both the sintering behavior and microwave dielectric properties of PbO-B203-SiO2 glass ceramics were investigated by Fourier transform infrared spectroscope （FTIR）, differential thermal analysis （DTA）, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results show that with the increase of Al2O3 content the bands assigned to [SiO4] nearly disappear. Aluminum replaces silicon in the glass network, which is helpful for the formation of boron-oxygen rings. The increase of the transition temperature Tg and softening temperature Tf of PbO-B2O3-SiO2 glass ceramics leads to the increase of liquid phase precipitation temperature and promotes the structure stability in the glasses, and consequently contributes to the decreasing trend of crystallization. Densification and dielectric constants increase with the increase of Al2O3 content, but the dielectric loss is worsened. By contrast, the 3% （mass fraction） Al2O3-doped glass ceramics sintered at 725℃ have better properties of density p=2.72 g/cm3, dielectric constant Er=6.78, dielectric loss tan8=2.6×10^-3 （measured at 9.8 GHz）, which suggest that the glass ceramics can be applied in multilayer microwave devices requiring low sintering temperatures.
基金Project(2007AA03Z0455) supported by the National High Technology Research and Development Program of ChinaProject(BE2010194) supported by Science&Technology Pillar Program of Jiangsu Province, China+1 种基金Project(KF201103) supported by the State Key Laboratory of New Ceramic and Fine Processing, Tsinghua University, ChinaProject supported by the Priority Academic Development of Jiangsu Higher Education Institutions, China
文摘CaO-B203-SiO2 （CBS） glass powders are prepared by conventional glass melting method at different melting temperatures whose properties and microstructures are characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. It is found that there are SiO2 and some unknown phases in CBS glass melting liquid from 1 300 ℃ to 1 500 ℃ and the amount of these phases decreases with the increase of the melting temperature. The CBS glass melted at 1 450 ℃ could be sintered from 830 ℃ to 930 ℃ and the bulk densities of the samples are all higher than 2.4 g/cm^3. From the points of the properties and energy conservation, the melting temperature of 1 450 ℃ is the optimal melting temperature. The glass ceramic sintered at 850 ℃ exhibits better dielectric properties： er=6.33, tan6=2.2×10^-3 at 10 GHz, and the major phases of the samples are CaSiO3, CaB2O4 and SiO2.
基金the program for Changjiang Scholars and Innovative Research Team in University (No.IRT0547
文摘CeO2-TiO2 films and CeO2-TiO/SnO2：Sb （6 mol%） double films were deposited on glass substrates by radio-frequency magnetron sputtering （R.F. Sputtering）, using SnO2：Sb（6 mol%） target, and CeO2- TiO2 targets with different molar ratio of CeO2 to TiO2 （CeO2：TiO2-0：1.0; 0.1：0.9; 0.2：0.8; 0.3：0.7; 0.4：0.6; 0.5：0.5; 0.6：0.4; 0.7：0.3; 0.8：0.2; 0.9：0.1; 1.0：0）. The films are characterized by UV-visible transmission and infrared reflection spectra, scanning electron microscopy （SEM）, Raman spectroscopy, X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The obtained results show that the amorphous phases composed of CeO2-TiO2 play an important role in absorbing UV, there are Ce^3-, Ce^4- and Ti^4- on the surface of the films; the glass substrates coated with CeO2-TiO2 （Ce/Ti=0.5：0.5; 0.6：0.4）/SnO2：Sb（6 mol%） double films show high absorbing UV（〉99）, high visible light transmission （75%） and good infrared reflection （〉70%）. The sheet resistance of the films is 30-50 Ω/□. The glass substrates coated with the double functional films can be used as window glass of buildings, automobile and so on.
