A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were...A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were characterized by nitrogen adsorption-desorption,low and wide-angle X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),scanning electron microscopy(SEM),elemental mapping and energy-dispersive X-ray(EDX)methods.It was found that the particle size,electronic interactions,morphology,and textural properties of these catalysts as well as their catalytic activity in the reaction of H_(2) with O_(2) were affected by Co addition and different calcination temperatures.Also,the results showed that while the H_(2)O_(2) selectivity depends on Pd^(2+) species,the H_(2) conversion is related to Pd0 active sites.Among these catalysts,CoPd/KIT-6 calcined at 350℃(CoPd/KIT-350 catalyst)showed the best catalytic activity with 50%of H_(2)O_(2) selectivity and 51%conversion of H_(2).展开更多
Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed...Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.展开更多
A series of Pd/MIL-53(Al) heterogeneous bifunctional catalysts with di erent Pd contents were prepared by an impregnation method. The prepared metal–organic frameworks MIL-53(Al) and catalysts were characterized by X...A series of Pd/MIL-53(Al) heterogeneous bifunctional catalysts with di erent Pd contents were prepared by an impregnation method. The prepared metal–organic frameworks MIL-53(Al) and catalysts were characterized by XRD, SEM, HRTEM,FT-IR and N2 adsorption/desorption techniques. The results showed that MIL-53(Al) was synthesized successfully, and the structure was unchanged during and after the preparation of the catalysts. The Pd nanoparticles(NPs) with an average particle size of 4.6 nm were uniformly dispersed on the MIL-53(Al). The catalyst exhibited good catalytic activity in the selective oxidation of liquid methanol to methyl formate. Under the conditions of 150 °C, 2 MPa O2 and solvent-free for5 h, the conversion of methanol could reach 60.3%, and the selectivity of methyl formate was up to 62.2%. In addition, the Pd/MIL-53(Al) bifunctional catalyst exhibited excellent stability and maintained high catalytic activity after five cycles.展开更多
Alkali-promoted Pd/Al2O3 catalysts exhibit much higher activities in NO decomposition than Pd/Al2O3. FTIR study shows that on the alkali promoted catalyst.nitric oxide exists on the surface mainly in negatively charge...Alkali-promoted Pd/Al2O3 catalysts exhibit much higher activities in NO decomposition than Pd/Al2O3. FTIR study shows that on the alkali promoted catalyst.nitric oxide exists on the surface mainly in negatively charged form(NO-)at high temperatures.which is consistent with the activity improvement.展开更多
Pd-Ag bimetallic alloy nanoparticles were synthesized by the reverse microemulsion method,and then deposited on Al2O3 to form the supported catalyst.The nanoparticles of Pd-Ag and Pd-Ag/Al2O3 samples were characterize...Pd-Ag bimetallic alloy nanoparticles were synthesized by the reverse microemulsion method,and then deposited on Al2O3 to form the supported catalyst.The nanoparticles of Pd-Ag and Pd-Ag/Al2O3 samples were characterized by UV/Vis,HRTEM,EDX,XRD,and XPS.The test results indicated that Pd-Ag bimetallic alloy nanoparticles with a size of about 2 nm and a face-centered cubic(fcc) structure were formed in the measured area of microemulsion.The growth of nanoparticles was effectively limited within the droplet of micoremulsion.TEM image exhibited that the Pd-Ag alloy nanoparticles were well-dispersed on the Al2O3 support.The catalytic performance of various catalysts for selective hydrogenation of acetylene showed that a higher acetylene conversion and selectivity to ethylene upon acetylene hydrogenation was achieved on a nano-sized Pd-Ag bimetallic catalyst with a Pd/Ag alloy supported molar ratio of 1:1.5.展开更多
In the current study simultaneous reactions of hydrodesulfurization(HDS) of dibenzothiophene(DBT) and reforming of methanol in a micro-autoclave reactor were studied over bi-metallic(Co-Mo/Al2O3 and Ni-Mo/Al2O3) and t...In the current study simultaneous reactions of hydrodesulfurization(HDS) of dibenzothiophene(DBT) and reforming of methanol in a micro-autoclave reactor were studied over bi-metallic(Co-Mo/Al2O3 and Ni-Mo/Al2O3) and tri-metallic(Pd-Co-Mo/Al2O3 and Pd-Ni-Mo/Al2O3) catalyst systems which were prepared by incipient impregnation method.In situ hydrogen utilization and low Pd loadings were the major targets of this study.For comparison purpose,catalytic activity was separately determined for both the methanol reforming and HDS of DBT reactions as well.Ni based catalysts were confirmed with better activity than Co ones for both the reactions with Pd promoted ones ranking at the top i.e.Pd-Ni-Mo/Al2O3 > Ni-Mo/Al2O3 > Pd-Co-Mo/Al2O3 > Co-Mo/Al2O3 where Pd-Ni-Mo/Al2O3 showed 91% DBT conversion at 380 ℃ and 12 h reaction time.Some of the selected organic additives on catalytic activity were tested for their effect toward HDS reaction which was unique with close relation to their chemical nature.Reaction products were quantitatively and qualitatively analyzed via HPLC and GC-MS techniques respectively which helped in elucidating reaction mechanism.展开更多
Aerogel Pd/(Ce0.33Zr0.66O2)SiO2 catalysts (CeZry) were prepared with variable Ce and Zr loadings (molar ratio Ce/Zr = 1/2) by combining sol-gel and impregnation methods. First, N2-physisorption was used to investigate...Aerogel Pd/(Ce0.33Zr0.66O2)SiO2 catalysts (CeZry) were prepared with variable Ce and Zr loadings (molar ratio Ce/Zr = 1/2) by combining sol-gel and impregnation methods. First, N2-physisorption was used to investigate the texture evolution. Then, H2-chimisorption and TEM were performed to study the effect on particle dispersion. After, TPR was used to determine the catalyst reducibility. Furthermore, XPS characterization was done to identify the palladium oxidation state and to evaluate the Pd-support interaction. Finally, the prepared catalysts were tested in methane combustion to assess their catalytic activity. The obtained results showed that, when the Zr and Ce loadings are varied between 0% and 8% and between 0% and 6% respectively, the BET surface area was increased from 615 to 744 m2/g, the porosity diameter from 45.7 to 83.6 Å, the Pd particle diameter from 5.2 to 7.0 nm, the CeO2 and ZrO2 particle size from 0 to 68 nm, the reduction temperature shift reached 16°C, the Pd binding energy shift attained 0.6 eV, but an optimum amounts of Zr (4 wt.%) and Ce (3 wt.%) are needed to maximize the PdO reducibility and to enhance the catalytic activity. In effect, 100% conversion of methane was reached at around 415°C on the CeZr4 catalyst.展开更多
Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and industry.Herein,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticle...Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and industry.Herein,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticles(NPs)on nitrogen-doped carbon;synthesized by using F127 as a stabilizer,as well as chitosan as a carbon and nitrogen source.The Pd/NCF catalyst was efficient and recyclable for oxidative carbonylation of phenol to diphenyl carbonate,exhibiting higher stability than Pd/NC prepared without F127 addition.The hydrogen bond between chitosan(CTS)and F127 was enhanced by F127,which anchored the N in the free amino group,increasing the N content of the carbon material and ensuring that the support could provide sufficient N sites for the deposition of Pd NPs.This process helped to improve metal dispersion.The increased metal-support interaction,which limits the leaching and coarsening of Pd NPs,improves the stability of the Pd/NCF catalyst.Furthermore,density functional theory calculations indicated that pyridine N stabilized the Pd^(2+)species,significantly inhibiting the loss of Pd^(2+)in Pd/NCF during the reaction process.This work provides a promising avenue towards enhancing the stability of nitrogen-doped carbon-supported metal catalysts.展开更多
Pd-based catalysts modified by cobalt were prepared by co-impregnation and sequential impregnation methods,and characterized by X-ray powder diffraction (XRD),N2 adsorption/desorption (Brunauer-Emmet-Teller method...Pd-based catalysts modified by cobalt were prepared by co-impregnation and sequential impregnation methods,and characterized by X-ray powder diffraction (XRD),N2 adsorption/desorption (Brunauer-Emmet-Teller method),CO-chemisorption and X-ray photoelectron spectroscopy (XPS).The activity of Pd catalysts was tested in the simulated exhaust gas from lean-burn natural gas vehicles.The effect of Co on the performance of water poisoning resistance for Pd catalysts was estimated in the simulated exhaust gas with and without the presence of water vapor.It was found that the effect of Co significantly depended on the preparation process.PdCo/La-Al2O3 catalyst prepared by co-impregnation exhibited better water-resistant performance.The results of XPS indicated that both CoAl2O4 and Co3O4 were present in the Pd catalysts modified by Co.For the catalyst prepared by sequential impregnation method,the ratio of CoAl2O4/Co3O4 was higher than that of the catalyst prepared by co-impregnation method.It could be concluded that Co3O4 played an important role in improving water-resistant performance.展开更多
A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon...A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon - carbon double bonds systems and reusability. Furthermore, XPS and IR spectra shouted that active component in the composite catalysts is atomic Pd(0). An addition of a small amount of Fe2O3 has a promotive action upon hydrogenation activity of the catalysts, which indicated that there are some strong interactions (electron transfer) between Pd(0) and Fe(Ⅲ) species. Based on these results, a possible catalytic hydrogenation mechanism was also suggested.展开更多
基金the financial support(Research Council Grant)provided by Isfahan University of Technology(Iran).
文摘A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were characterized by nitrogen adsorption-desorption,low and wide-angle X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),scanning electron microscopy(SEM),elemental mapping and energy-dispersive X-ray(EDX)methods.It was found that the particle size,electronic interactions,morphology,and textural properties of these catalysts as well as their catalytic activity in the reaction of H_(2) with O_(2) were affected by Co addition and different calcination temperatures.Also,the results showed that while the H_(2)O_(2) selectivity depends on Pd^(2+) species,the H_(2) conversion is related to Pd0 active sites.Among these catalysts,CoPd/KIT-6 calcined at 350℃(CoPd/KIT-350 catalyst)showed the best catalytic activity with 50%of H_(2)O_(2) selectivity and 51%conversion of H_(2).
基金Supported by the Sinopec Corp.Scientific Research Projects(414076)
文摘Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.
基金Financial support received from the National Natural Science Foundation of China(Grant Nos.21573015,21872004)
文摘A series of Pd/MIL-53(Al) heterogeneous bifunctional catalysts with di erent Pd contents were prepared by an impregnation method. The prepared metal–organic frameworks MIL-53(Al) and catalysts were characterized by XRD, SEM, HRTEM,FT-IR and N2 adsorption/desorption techniques. The results showed that MIL-53(Al) was synthesized successfully, and the structure was unchanged during and after the preparation of the catalysts. The Pd nanoparticles(NPs) with an average particle size of 4.6 nm were uniformly dispersed on the MIL-53(Al). The catalyst exhibited good catalytic activity in the selective oxidation of liquid methanol to methyl formate. Under the conditions of 150 °C, 2 MPa O2 and solvent-free for5 h, the conversion of methanol could reach 60.3%, and the selectivity of methyl formate was up to 62.2%. In addition, the Pd/MIL-53(Al) bifunctional catalyst exhibited excellent stability and maintained high catalytic activity after five cycles.
文摘Alkali-promoted Pd/Al2O3 catalysts exhibit much higher activities in NO decomposition than Pd/Al2O3. FTIR study shows that on the alkali promoted catalyst.nitric oxide exists on the surface mainly in negatively charged form(NO-)at high temperatures.which is consistent with the activity improvement.
文摘Pd-Ag bimetallic alloy nanoparticles were synthesized by the reverse microemulsion method,and then deposited on Al2O3 to form the supported catalyst.The nanoparticles of Pd-Ag and Pd-Ag/Al2O3 samples were characterized by UV/Vis,HRTEM,EDX,XRD,and XPS.The test results indicated that Pd-Ag bimetallic alloy nanoparticles with a size of about 2 nm and a face-centered cubic(fcc) structure were formed in the measured area of microemulsion.The growth of nanoparticles was effectively limited within the droplet of micoremulsion.TEM image exhibited that the Pd-Ag alloy nanoparticles were well-dispersed on the Al2O3 support.The catalytic performance of various catalysts for selective hydrogenation of acetylene showed that a higher acetylene conversion and selectivity to ethylene upon acetylene hydrogenation was achieved on a nano-sized Pd-Ag bimetallic catalyst with a Pd/Ag alloy supported molar ratio of 1:1.5.
基金Fundamental Research Foundation of Sinopec(X505015)
文摘In the current study simultaneous reactions of hydrodesulfurization(HDS) of dibenzothiophene(DBT) and reforming of methanol in a micro-autoclave reactor were studied over bi-metallic(Co-Mo/Al2O3 and Ni-Mo/Al2O3) and tri-metallic(Pd-Co-Mo/Al2O3 and Pd-Ni-Mo/Al2O3) catalyst systems which were prepared by incipient impregnation method.In situ hydrogen utilization and low Pd loadings were the major targets of this study.For comparison purpose,catalytic activity was separately determined for both the methanol reforming and HDS of DBT reactions as well.Ni based catalysts were confirmed with better activity than Co ones for both the reactions with Pd promoted ones ranking at the top i.e.Pd-Ni-Mo/Al2O3 > Ni-Mo/Al2O3 > Pd-Co-Mo/Al2O3 > Co-Mo/Al2O3 where Pd-Ni-Mo/Al2O3 showed 91% DBT conversion at 380 ℃ and 12 h reaction time.Some of the selected organic additives on catalytic activity were tested for their effect toward HDS reaction which was unique with close relation to their chemical nature.Reaction products were quantitatively and qualitatively analyzed via HPLC and GC-MS techniques respectively which helped in elucidating reaction mechanism.
文摘Aerogel Pd/(Ce0.33Zr0.66O2)SiO2 catalysts (CeZry) were prepared with variable Ce and Zr loadings (molar ratio Ce/Zr = 1/2) by combining sol-gel and impregnation methods. First, N2-physisorption was used to investigate the texture evolution. Then, H2-chimisorption and TEM were performed to study the effect on particle dispersion. After, TPR was used to determine the catalyst reducibility. Furthermore, XPS characterization was done to identify the palladium oxidation state and to evaluate the Pd-support interaction. Finally, the prepared catalysts were tested in methane combustion to assess their catalytic activity. The obtained results showed that, when the Zr and Ce loadings are varied between 0% and 8% and between 0% and 6% respectively, the BET surface area was increased from 615 to 744 m2/g, the porosity diameter from 45.7 to 83.6 Å, the Pd particle diameter from 5.2 to 7.0 nm, the CeO2 and ZrO2 particle size from 0 to 68 nm, the reduction temperature shift reached 16°C, the Pd binding energy shift attained 0.6 eV, but an optimum amounts of Zr (4 wt.%) and Ce (3 wt.%) are needed to maximize the PdO reducibility and to enhance the catalytic activity. In effect, 100% conversion of methane was reached at around 415°C on the CeZr4 catalyst.
基金support by the National Natural Science Foundation of China(U21A20306,U20A20152)Natural Science Foundation of Hebei Province(B2022202077).
文摘Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and industry.Herein,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticles(NPs)on nitrogen-doped carbon;synthesized by using F127 as a stabilizer,as well as chitosan as a carbon and nitrogen source.The Pd/NCF catalyst was efficient and recyclable for oxidative carbonylation of phenol to diphenyl carbonate,exhibiting higher stability than Pd/NC prepared without F127 addition.The hydrogen bond between chitosan(CTS)and F127 was enhanced by F127,which anchored the N in the free amino group,increasing the N content of the carbon material and ensuring that the support could provide sufficient N sites for the deposition of Pd NPs.This process helped to improve metal dispersion.The increased metal-support interaction,which limits the leaching and coarsening of Pd NPs,improves the stability of the Pd/NCF catalyst.Furthermore,density functional theory calculations indicated that pyridine N stabilized the Pd^(2+)species,significantly inhibiting the loss of Pd^(2+)in Pd/NCF during the reaction process.This work provides a promising avenue towards enhancing the stability of nitrogen-doped carbon-supported metal catalysts.
基金supported by the National Natural Science Foundation of China (20773090)the Ph.D.Programs Foundation of Ministry of Education of China (200806100009)
文摘Pd-based catalysts modified by cobalt were prepared by co-impregnation and sequential impregnation methods,and characterized by X-ray powder diffraction (XRD),N2 adsorption/desorption (Brunauer-Emmet-Teller method),CO-chemisorption and X-ray photoelectron spectroscopy (XPS).The activity of Pd catalysts was tested in the simulated exhaust gas from lean-burn natural gas vehicles.The effect of Co on the performance of water poisoning resistance for Pd catalysts was estimated in the simulated exhaust gas with and without the presence of water vapor.It was found that the effect of Co significantly depended on the preparation process.PdCo/La-Al2O3 catalyst prepared by co-impregnation exhibited better water-resistant performance.The results of XPS indicated that both CoAl2O4 and Co3O4 were present in the Pd catalysts modified by Co.For the catalyst prepared by sequential impregnation method,the ratio of CoAl2O4/Co3O4 was higher than that of the catalyst prepared by co-impregnation method.It could be concluded that Co3O4 played an important role in improving water-resistant performance.
文摘A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon - carbon double bonds systems and reusability. Furthermore, XPS and IR spectra shouted that active component in the composite catalysts is atomic Pd(0). An addition of a small amount of Fe2O3 has a promotive action upon hydrogenation activity of the catalysts, which indicated that there are some strong interactions (electron transfer) between Pd(0) and Fe(Ⅲ) species. Based on these results, a possible catalytic hydrogenation mechanism was also suggested.