At different annealing temperatures, the saturation magnetostrictions and the correlation between the permeability μi and the temperature T （μi-T curves） of the Co66Fe4Mo2Si16B12 alloy were investigated using a sm...At different annealing temperatures, the saturation magnetostrictions and the correlation between the permeability μi and the temperature T （μi-T curves） of the Co66Fe4Mo2Si16B12 alloy were investigated using a small-angle magnetization tester and core tester. The experimental results showed that the μi-T curves had different shapes at different ranges of annealing temperature; the permeability μi of the alloy improved with the increase of the annealing temperatures below 460℃; when the alloy was annealed above 480℃, the poor magnetic properties were considered to be caused by larger saturation magnetostriction.展开更多
Phenylalanine （Phe） is a significant amino acid that cannot be synthesized by human themselves but must be taken from environment. It was initially found that the nanosized amorphous Ni-B/SiO2 alloy prepared by the ...Phenylalanine （Phe） is a significant amino acid that cannot be synthesized by human themselves but must be taken from environment. It was initially found that the nanosized amorphous Ni-B/SiO2 alloy prepared by the chemical reduction method was an effective catalyst for the preparation of Phe from phenylpyruvic acid （PPA） by amination and hydrogenation. It has been found that the amorphous Ni-B/SiO2 alloy catalyst exhibits superior activity and selectivity to the traditional catalysts Raney Ni and Urushibara nickel. The effects of reaction time, amounts of catalysts and ammonia solution, reaction temperature, and H2 pressure on the reaction have been investigated systematically. The results indicated that the yield of Phe was 97.9%, and the selectivity for Phe reached 98.9% when the reaction was carried out for 3 h at 333 K and 2.0 MPa of H2 with m（Cat.） ： m（PPA） = 0.6 ： 1.0 and n（NH3） ： n（PPA） = 3 ： 1. The catalysts were characterized by XRD, AAS, XPS, BET, and TEM, and the relationship between the catalyst structure and the catalytic activity was discussed in detail. It was found that the reason why Ni-B/SiO2 amorphous alloy catalyst was much more active for the preparation of Phe could be accounted for by the presence of electron-rich Ni due to electron donation from alloying B; the smaller size of Ni-B particles, the larger specific surface area of Ni-B/SiO2.展开更多
The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that ...The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that under certain technical conditions, nanocrystalline is fiound on the surface of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by laser; the crystallization phase is α-Fe（Si） crystalline, and its size is about 10-20 nm; the nanocrystalline is uniformly distributed on amorphous base to keep the amorphous and crystallized phase in balance; the a mount of crystallization reaches 23% when the laser power is 300 W, the diameter of light spot is 20 mm, and the radiation speed is 20 mm/s. The phase balance can be controlled by adjusting the laser technology parameter. Laser radiation on the amorphous Fe73.5 Cu1Nb3Si13.5B9 alloy is an important technique for surface nanocrystallization of the amorphous alloys.展开更多
Ti-47Al-2Nb-2Cr-0.15B(mole fraction,%)alloy was vacuum brazed with amorphous and crystalline Ti.25Zr-12.5Cu-12.5Ni-3.0Co-2.0Mo(mass fraction,%)filler alloys,and the melting,spreading and gap filling behaviors of the a...Ti-47Al-2Nb-2Cr-0.15B(mole fraction,%)alloy was vacuum brazed with amorphous and crystalline Ti.25Zr-12.5Cu-12.5Ni-3.0Co-2.0Mo(mass fraction,%)filler alloys,and the melting,spreading and gap filling behaviors of the amorphous and crystalline filler alloys as well as the joints brazed with them were investigated in details.Results showed that the amorphous filler alloy possessed narrower melting temperature interval,lower liquidus temperature and melting active energy compared with the crystalline filler alloy,and it also exhibited better brazeability on the surface of the Ti.47Al.2Nb.2Cr.0.15B alloy.The TiAl joints brazed with crystalline and amorphous filler alloys were composed of two interfacial reaction layers and a central brazed layer.Under the same conditions,the tensile strength of the joint brazed with the amorphous filler alloy was always higher than that with the crystalline filler alloy.The maxmium tensile strength of the joint brazed at 1273 K with the amorphous filler alloy reached 254 MPa.展开更多
NiB/SiO2 amorphous alloy catalyst was prepared by power electroless plating method and characterized by induction coupled plasma(ICP),Brunauer–Emmett–Teller method(BET),transmission electron microscope(TEM)and X-ray...NiB/SiO2 amorphous alloy catalyst was prepared by power electroless plating method and characterized by induction coupled plasma(ICP),Brunauer–Emmett–Teller method(BET),transmission electron microscope(TEM)and X-ray diffraction(XRD)techniques.The catalytic perfor-mance of NiB/SiO2 was investigated for the hydrogenation of furfuryl alcohol(FA)to tetrahydrofurfuryl alcohol(THFA).The effects of operational conditions,such as reaction tem-perature,pressure,and stirring rate were carefully studied.The proper conditions were determined as the following:pressure 2.0 MPa,temperature 120°C and stirring rate 550 r/min.A typical result with FA conversion of 99%and THFA selectivity of 100%was obtained under such conditions,which was close to that over Raney Ni.展开更多
文摘At different annealing temperatures, the saturation magnetostrictions and the correlation between the permeability μi and the temperature T （μi-T curves） of the Co66Fe4Mo2Si16B12 alloy were investigated using a small-angle magnetization tester and core tester. The experimental results showed that the μi-T curves had different shapes at different ranges of annealing temperature; the permeability μi of the alloy improved with the increase of the annealing temperatures below 460℃; when the alloy was annealed above 480℃, the poor magnetic properties were considered to be caused by larger saturation magnetostriction.
基金Fundamental research project of South-Central University for Nationalities (No. YZZ05010)
文摘Phenylalanine （Phe） is a significant amino acid that cannot be synthesized by human themselves but must be taken from environment. It was initially found that the nanosized amorphous Ni-B/SiO2 alloy prepared by the chemical reduction method was an effective catalyst for the preparation of Phe from phenylpyruvic acid （PPA） by amination and hydrogenation. It has been found that the amorphous Ni-B/SiO2 alloy catalyst exhibits superior activity and selectivity to the traditional catalysts Raney Ni and Urushibara nickel. The effects of reaction time, amounts of catalysts and ammonia solution, reaction temperature, and H2 pressure on the reaction have been investigated systematically. The results indicated that the yield of Phe was 97.9%, and the selectivity for Phe reached 98.9% when the reaction was carried out for 3 h at 333 K and 2.0 MPa of H2 with m（Cat.） ： m（PPA） = 0.6 ： 1.0 and n（NH3） ： n（PPA） = 3 ： 1. The catalysts were characterized by XRD, AAS, XPS, BET, and TEM, and the relationship between the catalyst structure and the catalytic activity was discussed in detail. It was found that the reason why Ni-B/SiO2 amorphous alloy catalyst was much more active for the preparation of Phe could be accounted for by the presence of electron-rich Ni due to electron donation from alloying B; the smaller size of Ni-B particles, the larger specific surface area of Ni-B/SiO2.
文摘The surface nanocrystallization of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by CO2 laser was studied by means of M（oe）ssbauer spectroscopy, transmission electro iroscope and X-ray diffraction. The result shows that under certain technical conditions, nanocrystalline is fiound on the surface of amorphous Fe73.5 Cu1Nb3Si13.5B9 radiated by laser; the crystallization phase is α-Fe（Si） crystalline, and its size is about 10-20 nm; the nanocrystalline is uniformly distributed on amorphous base to keep the amorphous and crystallized phase in balance; the a mount of crystallization reaches 23% when the laser power is 300 W, the diameter of light spot is 20 mm, and the radiation speed is 20 mm/s. The phase balance can be controlled by adjusting the laser technology parameter. Laser radiation on the amorphous Fe73.5 Cu1Nb3Si13.5B9 alloy is an important technique for surface nanocrystallization of the amorphous alloys.
基金Foundation item:Project(51865012)supported by the National Natural Science Foundation of ChinaProject(2016005)supported by the Open Foundation of National Engineering Research Center of Near-net-shape Forming for Metallic Materials,China+2 种基金Project(GJJ170372)supported by the Science Foundation of Educational Department of Jiangxi Province,ChinaProject(JCKY2016603C003)supported by the GF Basic Research Project,ChinaProject(JPPT125GH038)supported by the Research Project of Special Furnishment and Part,China
文摘Ti-47Al-2Nb-2Cr-0.15B(mole fraction,%)alloy was vacuum brazed with amorphous and crystalline Ti.25Zr-12.5Cu-12.5Ni-3.0Co-2.0Mo(mass fraction,%)filler alloys,and the melting,spreading and gap filling behaviors of the amorphous and crystalline filler alloys as well as the joints brazed with them were investigated in details.Results showed that the amorphous filler alloy possessed narrower melting temperature interval,lower liquidus temperature and melting active energy compared with the crystalline filler alloy,and it also exhibited better brazeability on the surface of the Ti.47Al.2Nb.2Cr.0.15B alloy.The TiAl joints brazed with crystalline and amorphous filler alloys were composed of two interfacial reaction layers and a central brazed layer.Under the same conditions,the tensile strength of the joint brazed with the amorphous filler alloy was always higher than that with the crystalline filler alloy.The maxmium tensile strength of the joint brazed at 1273 K with the amorphous filler alloy reached 254 MPa.
文摘NiB/SiO2 amorphous alloy catalyst was prepared by power electroless plating method and characterized by induction coupled plasma(ICP),Brunauer–Emmett–Teller method(BET),transmission electron microscope(TEM)and X-ray diffraction(XRD)techniques.The catalytic perfor-mance of NiB/SiO2 was investigated for the hydrogenation of furfuryl alcohol(FA)to tetrahydrofurfuryl alcohol(THFA).The effects of operational conditions,such as reaction tem-perature,pressure,and stirring rate were carefully studied.The proper conditions were determined as the following:pressure 2.0 MPa,temperature 120°C and stirring rate 550 r/min.A typical result with FA conversion of 99%and THFA selectivity of 100%was obtained under such conditions,which was close to that over Raney Ni.
