Thermoplastic immobilizing masks have dosimetric effects on the patient’s skin dose. The thermoplastic percentage depth dose (PDD), equivalent thickness of water for the masks and surface doses were determined. The s...Thermoplastic immobilizing masks have dosimetric effects on the patient’s skin dose. The thermoplastic percentage depth dose (PDD), equivalent thickness of water for the masks and surface doses were determined. The surface dose factors due to the thermoplastic mask was found to be 1.7949, 1.9456, 2.0563, 2.1967, 2.3827, 2.5459 and 2.6565 for field sizes of 5 × 5, 8 × 8, 10 × 10, 12 × 12, 15 × 15, 18 × 18 and 20 × 20 cm<sup>2</sup> respectively which shifted the percentage depth dose curve to lower values. The physical thermoplastic thickness was measured to be between 2.30 and 1.80 mm, and the equivalent thicknesses of water, d<sub>e</sub>, were determined to be between 1.2 and 1.00 mm. This meant that, as the mask thickness decreased, its water equivalent thickness also decreased. The presence of the mask material increased the skin dose to a factor of 1%. The thermoplastic mask factor was also found to be 0.99.展开更多
The purpose of this article is to explore the cause of the over-response phenomenon of fiber x-ray sensor.The sensor is based on a length of PMMA fiber,whose end is filled with the scintillation material Gd_(2)O_(2)S:...The purpose of this article is to explore the cause of the over-response phenomenon of fiber x-ray sensor.The sensor is based on a length of PMMA fiber,whose end is filled with the scintillation material Gd_(2)O_(2)S:Tb.The Monte Carlo simulation software GEANT4 uses the phase space file provided by the International Atomic Energy Agency(IAEA),by irradiating the fiber x-ray sensor in the water phantom,counting the fluorescence signal of the optical fiber x-ray sensor after propagation through the fiber.In addition,the number of Cerenkov photons propagating through the fiber is also counted.Comparing this article with previous research,we believe that one of the reasons for the over-response of the fiber x-ray sensor is the non-linear response of the deposition energy of the scintillator to the fluorescence.By establishing a region of interest and counting the x-rays in this region,the simulation results show that the counted number of x-rays that may affect the fiber x-ray sensor is the biggest in the area of interest at a water depth of 5 cm.This result is close to the maximum dose point of the experimental and simulated percentage depth dose(PDD) curve of fiber x-ray sensor.Therefore,the second reason of the over-response phenomenon is believed to be fact that the inorganic materials such as Gd_(2)O_(2)S:Tb have larger effective atomic numbers,so the fiber x-ray sensors will cause more collisions with x-ray in a low energy region of 0.1 MeV-1.5 MeV.展开更多
文摘Thermoplastic immobilizing masks have dosimetric effects on the patient’s skin dose. The thermoplastic percentage depth dose (PDD), equivalent thickness of water for the masks and surface doses were determined. The surface dose factors due to the thermoplastic mask was found to be 1.7949, 1.9456, 2.0563, 2.1967, 2.3827, 2.5459 and 2.6565 for field sizes of 5 × 5, 8 × 8, 10 × 10, 12 × 12, 15 × 15, 18 × 18 and 20 × 20 cm<sup>2</sup> respectively which shifted the percentage depth dose curve to lower values. The physical thermoplastic thickness was measured to be between 2.30 and 1.80 mm, and the equivalent thicknesses of water, d<sub>e</sub>, were determined to be between 1.2 and 1.00 mm. This meant that, as the mask thickness decreased, its water equivalent thickness also decreased. The presence of the mask material increased the skin dose to a factor of 1%. The thermoplastic mask factor was also found to be 0.99.
基金Project supported by the Natural Science Foundation of Heilongjiang ProvinceChina(Grant No.ZD2019H003)+4 种基金the Joint Research Fund in Astronomy under Cooperative Agreement Between the National Natural Science Foundation of China and Chinese Academy of Sciences(Grant Nos.U1631239 and U1931206)the 111 ProjectChina(Grant No.B13015)the Fundamental Research Funds for the Central Universities to the Harbin Engineering UniversityChina。
文摘The purpose of this article is to explore the cause of the over-response phenomenon of fiber x-ray sensor.The sensor is based on a length of PMMA fiber,whose end is filled with the scintillation material Gd_(2)O_(2)S:Tb.The Monte Carlo simulation software GEANT4 uses the phase space file provided by the International Atomic Energy Agency(IAEA),by irradiating the fiber x-ray sensor in the water phantom,counting the fluorescence signal of the optical fiber x-ray sensor after propagation through the fiber.In addition,the number of Cerenkov photons propagating through the fiber is also counted.Comparing this article with previous research,we believe that one of the reasons for the over-response of the fiber x-ray sensor is the non-linear response of the deposition energy of the scintillator to the fluorescence.By establishing a region of interest and counting the x-rays in this region,the simulation results show that the counted number of x-rays that may affect the fiber x-ray sensor is the biggest in the area of interest at a water depth of 5 cm.This result is close to the maximum dose point of the experimental and simulated percentage depth dose(PDD) curve of fiber x-ray sensor.Therefore,the second reason of the over-response phenomenon is believed to be fact that the inorganic materials such as Gd_(2)O_(2)S:Tb have larger effective atomic numbers,so the fiber x-ray sensors will cause more collisions with x-ray in a low energy region of 0.1 MeV-1.5 MeV.
