Pedicled abdominal flap using deep inferior epigastric artery perforators for forearm reconstruction: A case report

BACKGROUND Pedicled abdominal flaps are a widely used surgical technique for forearm reconstruction in patients with soft tissue defects.However,some drawbacks include restricted flap size,partial flap loss,and donor-site morbidity.To address these concerns,we present a case of a pedicled abdominal flap using the deep inferior epigastric artery perforators(DIEP)for forearm reconstruction in a patient with a large soft tissue defect.CASE SUMMARY A 46-year-old male patient was admitted to our hospital with forearm injury caused by a pressing machine.A 15 cm×10 cm soft tissue defect with complete rupture of the ulnar side structures of the forearm was found.One week after orthopedic management of the neurovascular injury and fractures using the first stage of Masquelet technique,the patient was referred to the plastic and recon-structive surgery department for wound coverage.Surgical debridement and negative-pressure wound therapy revealed a 20 cm×15 cm soft tissue defect.A pedicle abdominal flap with the DIEP was used to cover the defect.Three weeks later,the flap was detached from the abdomen,and the abdominal defect was directly closed.Subsequently,the second stage of Masquelet technique was performed at the fracture site at week 10.Finally,all donor and recipient sites healed without complications,such as flap dehiscence,infection,hematoma,or necrosis.Fracture site osteosynthesis was achieved without complications.CONCLUSION Pedicled abdominal flap using the DIEP provides a reliable option for forearm reconstruction in patients with large soft tissue defects.

Adipo Fascio Cutaneous Perforator Based, Shape Modified Radial Forearm Flap: Vascular Analysis of Perforators &Its Clinical Applications in Head &Neck Reconstruction

Resume of the study & Background: Radial forearm free flap with all its present day modifications is the workhorse of soft tissue reconstruction. Although there are several advantages, it requires sacrifice of a major artery of forearm. Several modifications are described in harvesting a forearm flap. In order to achieve a reliable, safe flap harvest & design one must have a very clear understanding of radial artery perforators, relative to its distribution, territory & flow. The purpose of this study is to determine the location, size & vascular territory of the radial artery cutaneous perforators & to demonstrate application of shape modification of radial forearm free flap based on its distal & proximal perforators in various head & neck defects. Materials & Methods: Anatomical Study: 12 fresh human cadavers & 24 cadaveric forearms were dissected to determine the number, location, size & vascular territory of radial artery perforator. The cutaneous territory of distally dominant perforators was analyzed using methylene blue injections & three-dimensional computed tomographic angiogram to determine the vascular network. Clinical Study: 15 patients with various head neck defects following oncological resections were reconstructed with shape modified adipo-fascio cutaneous free forearm flap. All these patients were prospectively followed for donor site healing, motor & sensory nerve deficit, function & quality of life questioner for donor site assessment. Results: 12 fresh human cadavers & 24 cadaveric forearms were dissected, and a total of 222 perforators were dissected for an average of 18.5 perforators per forearm. 118 were smaller than 0.5 mm in diameter (53.15%) & were not clinically significant. 104 perforators were greater than 0.5 mm in diameter (46.84%) & were clinically significant. 127 perforators (57.20%) were radially distributed & 95 perforators (42.79%) had ulnar distribution. 90 perforators (40.54%) were identified on distal side (Radial styloid) & 132 perforators (59.45%) were identified on proximal side (Lateral epicondyle). Mean number of perforators, on radial side was 10.6 & 7.9 on ulnar side;comparison of both using student t paired test gives a P value of 0.006, which is significant. Comparison of mean number of perforators on the distal side was 7.5 & proximal side was 11.0;Student Paired t test gives a P value of 0.003, which was statistically significant. Comparison of mean diameter of perforators on Distal side (1.11) & Proximal side (0.86), side using Student Paired t test gives a P value of 0.01 which was statistically significant. A chi square test was done to compare mean diameter of perforators on distal side, which was more than 1 mm (80%) & less than 1 mm (20%) & on proximal side more than 1 mm (35.6%) & less than 1 mm (64.4%). Chi square value of 42.406 was obtained, degree of freedom value was 1 & P value of Conclusion: Increase in knowledge of vascular territory of radial artery perforators with regards to numbers, size, location, & cutaneous territory can lead to expanded use of radial forearm flap based on either distal or proximal perforator alone. Shape modified technique for harvesting radial forearm flap allows primary closure of donor site. Donor site is better healed and shows a predicted pattern, which is functionally and aesthetically good.

Summary of the current guidelines for managing iatrogenic colorectal perforations and the evolving role of endoluminal vacuum therapy

Colonoscopy represents a safe procedure that is widely used in medical practice either to diagnose or treat various gastrointestinal diseases.During the last few years,the incidence rate of perforations in colonoscopic procedures has increased,especially in therapeutic colonoscopies.The recent advancements in endoscopic techniques and gastrointestinal tumoral resection procedures such as endoscopic mucosal resection,endoscopic full-thickness resection,and endoscopic submucosal dissection(ESD)could be a risk factor for this increased risk.The incidence rate of mortality of serious colonoscopic perforations is 7.1%.The management plan for these perforations starts with conservative treatment in mild cases,endoscopic closure,and surgical management in severe cases.Recently,endoluminal vacuum therapy was found to be effective in the management of colorectal perforations and this has been reported in multiple case reports.This editorial provides an overview of the current guidelines for the management of iatrogenic colorectal perforations.These insights are from the perspectives of endoscopists and gastroenterologists.We also present a management algorithm based on the guidelines of the European Society of Gastrointestinal Endoscopy,the American Gastroenterological Association,and the World Society of Emergency Surgery.We also discussed in brief the use of endoluminal vacuum therapy in colorectal perforations.

Utility of multi-detector row computed tomography angiography versus Doppler in localization of perforators of anterolateral thigh flaps

Aim:Anterolateral thigh(ALT)flap is widely used in reconstruction of various defects.Preoperative imaging facilitates perforator mapping,overcoming intraoperative uncertainty.The purpose of this study was to investigate the utility of multi-detector row computed tomography angiography(MDCTA)and a handheld Doppler in locating ALT perforators.Methods:Twenty patients were randomized into two groups.Group 1 patients received MDCTA and Doppler studies whereas Group 2 received only a Doppler study.The number,location,course,and source of all cutaneous and sizable perforators were compared with intraoperative findings.Surgeons’stress levels during flap harvest and flap harvest time were compared.Results:MDCTA findings correlated well with intraoperative findings for perforator type and segmental distribution with 100%concordance.Doppler alone had a 52%rate of concordance.The sensitivity and specificity for MDCTA in demonstrating the presence of perforators were 85.71%and 97.22%,respectively;whereas for Doppler alone the sensitivity and specificity were 80%and 87.91%,respectively.In demonstrating perforator source,MDCTA showed a sensitivity of 100%and specificity of 91.66%,with 100%accuracy.Sensitivity and specificity for sizable perforators were 90%each,with 88.88%accuracy.Doppler studies were unable to provide this information.Comparison of surgeon stress levels showed no differences between the two groups,although the time for flap harvest was significantly shorter in Group 1.Conclusion:MDCTA compared to Doppler is more sensitive,specific,and accurate with respect to location,course,and source of perforators.

Applications of SMILE-extracted lenticules in ophthalmology

AIM:To review recent innovations,challenges,and applications of small incision lenticule extraction(SMILE)extracted lenticule for treating ocular disorders.METHODS:A literature review was performed in the PubMed database,which was last updated on 30 December 2021.There was no limit regarding language.The authors evaluated the reference lists of the collected papers to find any relevant research.RESULTS:Due to the simplicity and accuracy of modern femtosecond lasers and the extensive development of SMILE surgery,many healthy human corneal stromal lenticules were extracted during surgery,motivating some professionals to investigate the SMILE lenticule reusability in different ocular disorders.In addition,new approaches had been developed to preserve,modify,and bioengineer the corneal stroma,leading to the optimal use of discarded byproducts such as lenticules from SMILE surgery.The lenticules can be effectively re-implanted into the autologous or allogenic corneas of human subjects to treat refractive errors,corneal ectasia,and corneal perforation and serve as a patch graft for glaucoma drainage devices with better cosmetic outcomes.CONCLUSION:SMILE-extracted lenticules could be a viable alternative to human donor corneal tissue.

Experimental study of hydraulic fracture propagation with multi-cluster in-plane perforations in a horizontal well

Tri-axial fracturing studies were carried out to understand the impact of lateral mechanical parameters on fracture propagation from multiple in-plane perforations in horizontal wells. Additionally, the discussion covered the effects of geology, treatment, and perforation characteristics on the non-planar propagation behavior. According to experimental findings, two parallel transverse fractures can be successfully initiated from in-plane perforation clusters in the horizontal well because of the in-plane perforation, the guide nonuniform fishbone structure fracture propagation still can be exhibited. The emergence of transverse fractures and axial fractures combined as complex fractures under low horizontal principal stress difference and large pump rate conditions. The injection pressure was also investigated, and the largest breakdown pressure can be also found for samples under these conditions.The increase in perforation number or decrease in the cluster spacing could provide more chances to increase the complexity of the target stimulated zone, thus affecting the pressure fluctuation. In a contrast, the increase in fracturing fluid viscosity can reduce the multiple fracture complexity. The fracture propagation is significantly affected by the change in the rock mechanical properties. The fracture geometry in the high brittle zone seems to be complicated and tends to induce fracture reorientation from the weak-brittle zone. The stress shadow effect can be used to explain the fracture attraction, branch, connection, and repulsion in the multiple perforation clusters for the horizontal well.The increase in the rock heterogeneity can enhance the stress shadow effect, resulting in more complex fracture geometry. In addition, the variable density perforation and temporary plugging fracturing were also conducted, demonstrating higher likelihood for non-uniform multiple fracture propagation. Thus, to increase the perforation efficiency along the horizontal well, it is necessary to consider the lateral fracability of the horizontal well on target formation.

Perforated gastric ulcer causing mediastinal emphysema: A case report

BACKGROUND Mediastinal emphysema is a condition in which air enters the mediastinum between the connective tissue spaces within the pleura for a variety of reasons.It can be spontaneous or secondary to chest trauma,esophageal perforation,medi-cally induced factors,etc.Its common symptoms are chest pain,tightness in the chest,and respiratory distress.Most mediastinal emphysema patients have mild symptoms,but severe mediastinal emphysema can cause respiratory and circulatory failure,resulting in serious consequences.CASE SUMMARY A 75-year-old man,living alone,presented with sudden onset of severe epigastric pain with chest tightness after drinking alcohol.Due to the remoteness of his residence and lack of neighbors,the patient was found by his nephew and brought to the hospital the next morning after the disease onset.Computed tomography(CT)showed free gas in the abdominal cavity,mediastinal emph-ysema,and subcutaneous pneumothorax.Upper gastrointestinal angiography showed that the esophageal mucosa was intact and the gastric antrum was perforated.Therefore,we chose to perform open gastric perforation repair on the patient under thoracic epidural anesthesia combined with intravenous anesthesia.An operative incision of the muscle layer of the patient's abdominal wall was made,and a large amount of subperitoneal gas was revealed.And a continued incision of the peritoneum revealed the presence of a perforation of approx-imately 0.5 cm in the gastric antrum,which we repaired after pathological examination.Postoperatively,the patient received high-flow oxygen and cough exercises.Chest CT was performed on the first and sixth postoperative days,and the mediastinal and subcutaneous gas was gradually reduced.CONCLUSION After gastric perforation,a large amount of free gas in the abdominal cavity can reach the mediastinum through the loose connective tissue at the esophageal hiatus of the diaphragm,and upper gastrointestinal angiography can clarify the site of perforation.In patients with mediastinal emphysema,open surgery avoids the elevation of the diaphragm caused by pneumoperitoneum compared to laparoscopic surgery and avoids increasing the mediastinal pressure.In addition,thoracic epidural anesthesia combined with intravenous anesthesia also avoids pressure on the mediastinum from mechanical ventilation.

Colon perforation with severe peritonitis caused by erotic toy insertion and treated using vacuum-assisted closure:A case report

BACKGROUND Colorectal foreign bodies are commonly encountered during surgery.They are frequently observed in men 20 to 90 years of age and have bimodal age distribution.Surgical management is necessary for cases of rectal perforation.However,surgical site infections are the most common complications after colorectal surgery.CASE SUMMARY We discuss a case of rectal perforation in a patient who presented to our hospital 2 d after its occurrence.The perforation occurred as a result of the patient inserting a sex toy in his rectum.Severe peritonitis was attributable to delayed presentation.CONCLUSION Vacuum-assisted closure was performed to treat the wound,which healed well after therapy.No complications were noted.

Appendicitis combined with Meckel’s diverticulum obstruction, perforation, and inflammation in children: Three case reports

BACKGROUND Meckel’s diverticulum is a common congenital malformation of the small intestine,with the three most common complications being obstruction,per-foration,and inflammation.To date,only a few cases have been reported world-wide.In children,the clinical symptoms are similar to appendicitis.As most of the imaging features are nonspecific,the preoperative diagnosis is not precise.In addition,the clinical characteristics are highly similar to pediatric acute appendicitis,thus special attention is necessary to distinguish Meckel’s diver-ticulum from pediatric appendicitis.Patients with poor disease control should undergo laparoscopic exploration to avoid serious complications,including intestinal necrosis,intestinal perforation and gastrointestinal bleeding.CASE SUMMARY This report presents three cases of appendicitis in children combined with intestinal obstruction,which was caused by fibrous bands(ligaments)arising from the top part of Meckel's diverticulum,diverticular perforation,and diver-ticular inflammation.All three patients,aged 11-12 years,had acute appendicitis as their initial clinical presentation.All were treated by laparoscopic surgery with a favorable outcome.A complete dataset including clinical presentation,dia-gnostic imaging,surgical information,and histopathologic findings was also provided.CONCLUSION Preoperative diagnosis of Meckel’s diverticulum and its complications is challenging because its clinical signs and complications are similar to those of appendicitis in children.Laparoscopy combined with laparotomy is useful for diagnosis and treatment.

Dynamic simulation of double-cased perforation in deepwater high temperature and high-pressure oil and gas wells

In order to ensure the penetrability of double-cased perforation in offshore oil and gas fields and to maximize the capacity of perforation completion, This study establishes a dynamic model of double-cased perforation using ANSYS/LS-DYNA simulation technology. The combination of critical perforation parameters for double casing is obtained by studying the influencing factors of the jet-forming process,perforation depth, diameter, and stress changes of the inner and outer casing. The single-target perforation experiments under high-temperature and high-pressure(HTHP) conditions and ground full-scale ring target perforation tests are designed to verify the accuracy of numerical simulation results. The reduced factor is adopted as the quantitative measure of perforation depth and diameter for different types of perforation charge under different conditions. The results show that the perforation depth reduction increases with temperature and pressure, and the reduced factor is between 0.67 and 0.87 under HTHP conditions of 130℃/44 MPa and 137℃/60 MPa. Comparing the results of the numerical simulation and the full-scale test correction, the maximum error is less than 8.91%, and this numerical simulation has strong reliability. This research provides a basis for a reasonable range of double-cased perforation parameters and their optimal selection.

The influences of perforating phase and bedding planes on the fracture deflection in laminated shale

The perforating phase leads to complex and diverse hydraulic fracture propagation behaviors in laminated shale formations. In this paper, a 2D high-speed imaging scheme which can capture the interaction between perforating phase and natural shale bedding planes was proposed. The phase field method was used to simulate the same conditions as in the experiment for verification and hydraulic fracture propagation mechanism under the competition of perforating phase and bedding planes was discussed.The results indicate that the bedding planes appear to be no influence on fracture propagation while the perforating phase is perpendicular to the bedding planes, and the fracture propagates along the perforating phase without deflection. When the perforating phase algins with the bedding planes, the fracture initiation pressure reserves the lowest value, and no deflection occurs during fracture propagation. When the perforating phase is the angle 45°, 60°and 75°of bedding planes, the bedding planes begin to play a key role on the fracture deflection. The maximum deflection degree is reached at the perforating phase of75°. Numerical simulation provides evidence that the existence of shale bedding planes is not exactly equivalent to anisotropy for fracture propagation and the difference of mechanical properties between different shale layers is the fundamental reason for fracture deflection. The findings help to understand the intrinsic characteristics of shale and provide a theoretical basis for the optimization design of field perforation parameters.

Numerical Analysis of Perforation during Hydraulic Fracture Initiation Based on Continuous-Discontinuous Element Method

Perforation is a pivotal technique employed to establish main flow channels within the reservoir formation at the outset of hydraulic fracturing operations.Optimizing perforation designs is critical for augmenting the efficacy of hydraulic fracturing and boosting oil or gas production.In this study,we employ a hybrid finite-discrete element method,known as the continuous–discontinuous element method(CDEM),to simulate the initiation of post-perforation hydraulic fractures and to derive enhanced design parameters.The model incorporates the four most prevalent perforation geometries,as delineated in an engineering technical report.Real-world perforations deviate from the ideal cylindrical shape,exhibiting variable cross-sectional profiles that typically manifest as an initial constriction followed by an expansion,a feature consistent across all four perforation types.Our simulations take into account variations in perforation hole geometries,cross-sectional diameters,and perforation lengths.The findings show that perforations generated by the 39g DP3 HMX perforating bullet yield the lowest breakdown pressure,which inversely correlates with increases in sectional diameter and perforation length.Moreover,this study reveals the relationship between breakdown pressure and fracture degree,providing valuable insights for engineers and designers to refine perforation strategies.

Transportation and sealing pattern of the temporary plugging ball at the spiral perforation in the horizontal well section

Multistage fracturing of horizontal wells is a critical technology for unconventional oil and gas reservoir stimulation. Ball-throwing temporary plugging fracturing is a new method for realizing uniform fracturing along horizontal wells and plays an important role in increasing oil and gas production. However,the transportation and sealing law of temporary plugging balls(TPBs) in the perforation section of horizontal wells is still unclear. Using COMSOL computational fluid dynamics and a particle tracking module, we simulate the transportation process of TPBs in a horizontal wellbore and analyse the effects of the ball density, ball diameter, ball number, fracturing fluid injection rate, and viscosity on the plugging efficiency of TPB transportation. This study reveals that when the density of TPBs is close to that of the fracturing fluid and a moderate diameter of the TPB is used, the plugging efficiency can be substantially enhanced. The plugging efficiency is greater when the TPB number is close to twice the number of perforations and is lower when the number of TPBs is three times the number of perforations.Adjusting the fracturing fluid injection rate from low to high can control the position of the TPBs,improving plugging efficiency. As the viscosity of the fracturing fluid increases, the plugging efficiency of the perforations decreases near the borehole heel and increases near the borehole toe. In contrast, the plugging efficiency of the central perforation is almost unaffected by the fracturing fluid viscosity. This study can serve as a valuable reference for establishing the parameters for temporary plugging and fracturing.

Simple procedure for assessing diffuse subarachnoid hemorrhage successfully created using filament perforation method in mice

The murine model of subarachnoid hemorrhage(SAH)is a valuable experimental tool for investigating molecular and cellular mechanisms,and the endovascular filament perforation technique can be used to simulate prominent pathophysiological features observed after human SAH;however,current validation methods for assessing an appropriate SAH model are limited.Here,we introduce a simple procedure for se-lecting a mouse model of diffuse SAH.SAH was induced in 24 mice using a standard filament perforation method.After confirming survival at 24 h,SAH was scored 0-1 based on T2*-weighted images on whole-brain magnetic resonance imaging(MRI)and visual surveillance of the cisterna magna(CM)through the dura mater.The CM-based SAH grading correlated well with a reference parameter defined by extracted brain(r^(2)=0.53,p<0.0001).The receiver operating characteristic curve revealed a sensi-tivity of 85%and a specificity of 91%for detecting diffuse SAH,with a similar area under the curve(0.89±0.06[standard error of the mean])as the MRI-based grading(0.72±0.10,p=0.12).Our data suggest that confirming an SAH clot in the CM is a valuable way to select a clinically relevant diffuse SAH model that can be used in future experimental studies.

Analytical and Experimental Research on Wave Scattering by an Open-Type Rectangular Breakwater with Horizontal Perforated Plates

This study proposes a novel open-type rectangular breakwater combined with horizontal perforated plates on both sides to enhance the sheltering effect of the rectangular box-type breakwaters against longer waves.The hydrodynamic characteristics of this breakwater are analyzed through analytical potential solutions and experimental tests.The quadratic pressure drop conditions are exerted on the horizontal perforated plates to facilitate assessing the effect of wave height on the dissipated wave energy of breakwater through the analytical solution.The hydrodynamic quantities of the breakwater,including the reflection,transmission,and energyloss coefficients,together with vertical and horizontal wave forces,are calculated using the velocity potential decomposition method as well as an iterative algorithm.Furthermore,the reflection and transmission coefficients of the breakwater are measured by conducting experimental tests at various wave periods,wave heights,and both porosities and widths of the horizontal perforated plates.The analytical predicted results demonstrate good agreement with the iterative boundary element method solution and measured data.The influences of variable incident waves and structure parameters on the hydrodynamic characteristics of the breakwater are investigated through further calculations based on analytical solutions.Results indicate that horizontal perforated plates placed on the water surface for both sides of the rectangular breakwater can enhance the wave dissipation ability of the breakwater while effectively decreasing the transmission and reflection coefficients.

Research on the Generation Mechanism and Suppression Method of Aerodynamic Noise in Expansion Cavity Based on Hybrid Method

The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for numerically simulating and analyzing the unsteady flow and aerodynamic noise in an expansion chamber under the influence of airflow.A fluid simulation model is established,utilizing the Large Eddy Simulation(LES)method to calculate the unsteady flow within the expansion chamber.The simulation results effectively capture the development and changes of the unsteady flow and vorticity inside the cavity,exhibiting a high level of consistency with experimental observations.To calculate the aerodynamic noise sources within the cavity,the flow field results are integrated using the method of integral interpolation and inserted into the acoustic grid.The acoustic analogy method is then employed to determine the aerodynamic noise sources.An acoustic simulation model is established,and the flow noise source is imported into the sound field grid to calculate the sound pressure at the far-field response point.The calculated sound pressure levels and resonance frequencies show good agreement with the experimental results.To address the issue of airflow regeneration noise within the cavity,perforated tubes are selected as a means of noise suppression.An experimental platformfor airflow regeneration noise is constructed,and experimental samples are processed to analyze and verify the noise suppression effect of perforated tube expansion cavities under different airflow velocities.The research findings indicate that the perforated tube expansion cavity can effectively suppress low-frequency aerodynamic noise within the cavity by impeding the formation of strong shear layers.Moreover,the semi-perforated tube expansion cavity demonstrates the most effective suppression of aerodynamic noise.

Conquer coronary artery perforation with magic hands

Coronary artery perforation(CAP) poses a significant challenge for interventional cardiologists. Management of CAP depends on the location and severity of the perforation. The conventional method for addressing the perforation of large vessels involves the placement of a covered stent, while the perforation of distal and collateral vessels is typically managed using coils, autologous skin, subcutaneous fat, microspheres, gelatin sponge, thrombin or other substances. However, the above techniques have certain limitations and are not applicable in all scenarios. Our team has developed a range of innovative strategies for effectively managing CAP. This article provides an insightful review of the various tips and tricks for the treatment of CAP.

Double-nylon purse-string suture technique: Another addition to the endoscopist's toolbox for full-thickness defect closure

Iatrogenic perforation is the most feared adverse event in endoscopy.With the expansion of interventional endoscopy in favor of traditional surgery,it is now more crucial than ever to develop effective defect closure techniques.This has culminated in the dissemination of multiple novel closure technologies,including through-the-scope clips,over-the-scope clips,through-the-scope suturing and over-the-scope suturing devices.In this editorial,we comment on the recent publication by Wang and colleagues discussing the performance of the double-nylon purse-string suture technique in the closure of large(>3 cm)gastric full-thickness defects.This technique offers a promising,practical and cost-effective approach to closure of large full-thickness defects that can be readily imple-mented across diverse healthcare settings.

Effect of perforation density distribution on production of perforated horizontal wellbore

To address the issue of horizontal well production affected by the distribution of perforation density in the wellbore,a numerical model for simulating two-phase flow in a horizontal well is established under two perforation density distribution conditions(i.e.increasing the perforation density at inlet and outlet sections respectively).The simulation results are compared with experimental results to verify the reliability of the numerical simulation method.The behaviors of the total pressure drop,superficial velocity of air-water two-phase flow,void fraction,liquid film thickness,air production and liquid production that occur with various flow patterns are investigated under two perforation density distribution conditions based on the numerical model.The total pressure drop,superficial velocity of the mixture and void fraction increase with the air flow rate when the water flow rate is constant.The liquid film thickness decreases when the air flow rate increases.The liquid and air productions increase when the perforation density increases at the inlet section compared with increasing the perforation density at the outlet section of the perforated horizontal wellbore.It is noted that the air production increases with the air flow rate.Liquid production increases with the bubble flow and begins to decrease at the transition point of the slug-stratified flow,then increases through the stratified wave flow.The normalized liquid flux is higher when the perforation density increases at the inlet section,and increases with the radial air flow rate.

Scattering of Water Waves by Dual Symmetric Inclined Floating Porous Barriers Using the DBEM

The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.