连续相位QAM调制技术及其FPGA实现

本文详细介绍了一种新型QAM调制方法,该方法将QAM调制中的相位跳变改为连续变化。仿真实验表明,与普通的QAM调制相比,高次谐波分量大幅下降,同时误码率性能几乎不受影响,可以有效地提高频谱利用率。以FPGA器件为核心设计的连续相位QAM调制器,将绝大部分功能模块由大规模FPGA内部资源来实现,调制器中采用了双通道设计,成功实现了过渡区相位与主要区间相位的交替产生。

基于CPLD的连续相位QAM调制器

本文以CPLD器件为核心设计连续相位QAM调制器,将绝大部分功能模块由大规模CPLD内部资源来实现,这样既可以提高通信系统的稳定性和灵活性,又便于系统的集成化和小型化。由于连续相位QAM调制独特的相位变化,调制器中采用了双通道设计,成功实现了过渡区相位与主要区间相位的交替产生。

基于连续相位调制的OFDM信号研究

采用连续相位调制技术中相位转移平滑、频带利用率较高和带外功率较低的特性,研究了连续相位调制信号与部分响应序列相结合的方法,解决了OFDM信号峰平功率比较大的问题。建立了系统的数字模型并进行了仿真,仿真结果验证了该方法可以明显降低OFDM信号峰平功率比。

An Effective Method of SNR Estimation for LDPC-CPM

The technique of SNR estimation is one of the key technologies in adaptive frequency hopping system. The methods of channel quality estimation for non-linear continuous phase modulation (CPM) signals have some limitations. Therefore, the algorithm of channel quality estimation for CPM signals is worthy of further study. Some similar phase characteristics between sampling CPM and MPSK motivate us to propose a channel estimation algorithm with applications to nonlinear CPM using linear modulation signal processing. A comprehensive analysis of LDPC-CPM schemes using proposed algorithm is presented, and simulation results indicate that the proposed method can not only estimate channel quality well but also make the normalized MSE (NMSE) of SNR estimate close to/less than 0.1 dB at SNR of 4 dB using short block codes. It shows that the algorithm in this paper is effective enough to estimate the signal to noise ratio (SNR). Meanwhile, the algorithm in this paper reduces the complexity of computation compared with other traditional algorithms.