Using porous diatomite ceramic as carrier and phenolic resin as carbon precursor, the activated carbon functional ceramic with the activated carbon fixed into porous ceramic was prepared by the impregnation load pheno...Using porous diatomite ceramic as carrier and phenolic resin as carbon precursor, the activated carbon functional ceramic with the activated carbon fixed into porous ceramic was prepared by the impregnation load phenolic resin, carbonization and activation isolated air. The influences of impregnation, curing, carbonization, activation etc. on the material property were discussed. The iodine value, SEM, elemental analyzer, BET and spectrum analysis chart were used to characterize the microstructures and performance of material at different conditions. The results showed that the excellent comprehensive property of activated carbon functional ceramic was gained when it adsorbed phenolic resin in 4 h under vacuum condition at curing temperature of 150 ℃ for 0.5 h and carbonization temperature of 600 ℃ for 1.0 h, and then put into 25wt% KOH for 4.0 h at activation temperature of 700 ℃ for 1.5 h. The iodine value is 176.9 mg/g, the specific surface area can reach 86.3 m2/g and the yield of carbonization is 50.48%.展开更多
Activated carbon was fabricated by using oil asphalt as carbon source, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cyclic voltammetry and galvanostatic charge-di...Activated carbon was fabricated by using oil asphalt as carbon source, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that the pore size was mainly in the range of 0.5-9.0 nm. Supercapacitors based on the sample AC （Activated carbon） have low ESR and excellent power property.展开更多
Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the sample...Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that： Supercapacitors based on the sample AC-3 have low Equivalent series resistanceb （ESR） and excellent power property.展开更多
Activated carbon （AC） was fabricated by using phenolic resin as carbon source, silica gel as inorganic template, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cy...Activated carbon （AC） was fabricated by using phenolic resin as carbon source, silica gel as inorganic template, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that the pore size was mainly in the range of 0.5 9.0 nm. Supercapacitors based on the sample AC-3 have low equivalent series resistanceb （ESR） and excellent power property.展开更多
Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors.However,the sustainable development of c...Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors.However,the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde.Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds.Hence,lignin,phenol,and furfural were used to synthesize bio-based phenolic resins,and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation.Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties.The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78.The activated carbon nanofibers show a uniform diameter,specific surface area up to 1100 m^(2)·g^(-1),and total pore volume of 0.62 cm^(3)·g^(-1).The electrode demonstrates a specific capacitance of 238 F·g^(-1)(0.1 A·g^(-1))and good rate capability.The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg^(-1)at 100 W·kg^(-1)and an excellent capacitance retention of 98%after 10000 cycles.These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.展开更多
In this study,N-doped porous carbons were produced with commercial phenolic resin as the raw material,urea as the nitrogen source and KOH as the activation agent.Different from conventional carbonization-nitriding-act...In this study,N-doped porous carbons were produced with commercial phenolic resin as the raw material,urea as the nitrogen source and KOH as the activation agent.Different from conventional carbonization-nitriding-activation three-step method,a facile two-step process was explored to produce N-incorporated porous carbons.The as-obtained adsorbents hold superior CO2 uptake,i.e.5.01 and 7.47 mmol/g at 25℃and 0℃under 1 bar,respectively.The synergistic effects of N species on the surface and narrow micropores of the adsorbents decide their CO2 uptake under 25℃and atmospheric pressure.These phenolic resin-derived adsorbents also possess many extremely promising CO2 adsorption features like good recyclability,quick adsorption kinetics,modest heat of adsorption,great selectivity of CO2 over N2 and outstanding dynamic adsorption capacity.Cheap precursor,easy preparation strategy and excellent CO2 adsorption properties make these phenolic resin-derived N-doped carbonaceous adsorbents highly promising in CO2 capture.展开更多
基金Sponsored by the 2007 Fujian University and College New Century Excellent Talent Support Program (No. XSJRC2007-17)Natural Science Foundation of Fujian Province (No. 2010J01279)
文摘Using porous diatomite ceramic as carrier and phenolic resin as carbon precursor, the activated carbon functional ceramic with the activated carbon fixed into porous ceramic was prepared by the impregnation load phenolic resin, carbonization and activation isolated air. The influences of impregnation, curing, carbonization, activation etc. on the material property were discussed. The iodine value, SEM, elemental analyzer, BET and spectrum analysis chart were used to characterize the microstructures and performance of material at different conditions. The results showed that the excellent comprehensive property of activated carbon functional ceramic was gained when it adsorbed phenolic resin in 4 h under vacuum condition at curing temperature of 150 ℃ for 0.5 h and carbonization temperature of 600 ℃ for 1.0 h, and then put into 25wt% KOH for 4.0 h at activation temperature of 700 ℃ for 1.5 h. The iodine value is 176.9 mg/g, the specific surface area can reach 86.3 m2/g and the yield of carbonization is 50.48%.
文摘Activated carbon was fabricated by using oil asphalt as carbon source, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that the pore size was mainly in the range of 0.5-9.0 nm. Supercapacitors based on the sample AC （Activated carbon） have low ESR and excellent power property.
文摘Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that： Supercapacitors based on the sample AC-3 have low Equivalent series resistanceb （ESR） and excellent power property.
文摘Activated carbon （AC） was fabricated by using phenolic resin as carbon source, silica gel as inorganic template, KOH as activator. The samples were analyzed by N2 adsorption, scanning electron microscopy （SEM）. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that the pore size was mainly in the range of 0.5 9.0 nm. Supercapacitors based on the sample AC-3 have low equivalent series resistanceb （ESR） and excellent power property.
基金supported by the National Natural Science Foundation of China(Grant Nos.21908204,52074244)the Henan Provincial Key Research and Development Program(Grant No.192102310202).
文摘Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors.However,the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde.Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds.Hence,lignin,phenol,and furfural were used to synthesize bio-based phenolic resins,and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation.Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties.The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78.The activated carbon nanofibers show a uniform diameter,specific surface area up to 1100 m^(2)·g^(-1),and total pore volume of 0.62 cm^(3)·g^(-1).The electrode demonstrates a specific capacitance of 238 F·g^(-1)(0.1 A·g^(-1))and good rate capability.The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg^(-1)at 100 W·kg^(-1)and an excellent capacitance retention of 98%after 10000 cycles.These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.
基金supported by the Zhejiang Provincial Natural Sci-ence Foundation(No LQ17B060001)the National Natural Science Foundation of China(No 21706239)National Undergraduate Training Program for Innovation and Entrepreneurship of China。
文摘In this study,N-doped porous carbons were produced with commercial phenolic resin as the raw material,urea as the nitrogen source and KOH as the activation agent.Different from conventional carbonization-nitriding-activation three-step method,a facile two-step process was explored to produce N-incorporated porous carbons.The as-obtained adsorbents hold superior CO2 uptake,i.e.5.01 and 7.47 mmol/g at 25℃and 0℃under 1 bar,respectively.The synergistic effects of N species on the surface and narrow micropores of the adsorbents decide their CO2 uptake under 25℃and atmospheric pressure.These phenolic resin-derived adsorbents also possess many extremely promising CO2 adsorption features like good recyclability,quick adsorption kinetics,modest heat of adsorption,great selectivity of CO2 over N2 and outstanding dynamic adsorption capacity.Cheap precursor,easy preparation strategy and excellent CO2 adsorption properties make these phenolic resin-derived N-doped carbonaceous adsorbents highly promising in CO2 capture.
