A simple and general method for the synthesis of bi(acyl)disulfides is reported.Sulfur is allowed to react with sodium hydroxide to give sodium disulfide at 65℃ under PTC,which can react with acyl halides to afford b...A simple and general method for the synthesis of bi(acyl)disulfides is reported.Sulfur is allowed to react with sodium hydroxide to give sodium disulfide at 65℃ under PTC,which can react with acyl halides to afford bi(acyl)disulfides in good to excellent isolated yields.The effects of solvents and phase transfer catalysts are discussed.展开更多
Seven diaryl ethers were synthesized with potassium fluoride coated alumina as a strong base and the addition of catalytic amount of PTC. The yield of diaryl ethers with addition of PTC was much higher than that witho...Seven diaryl ethers were synthesized with potassium fluoride coated alumina as a strong base and the addition of catalytic amount of PTC. The yield of diaryl ethers with addition of PTC was much higher than that without PTC.A discussion of the catalysis mechanism was given in this paper.展开更多
The acetylated xylo-and arabinopyranosyl esters(1-8) were obtained in high yields with stereoselectivity by phase-transfer catalyzed (PTC) synthesis, and their structures were confirmed by elemental analysis and IR,^(...The acetylated xylo-and arabinopyranosyl esters(1-8) were obtained in high yields with stereoselectivity by phase-transfer catalyzed (PTC) synthesis, and their structures were confirmed by elemental analysis and IR,^(1)H-NMR spectral data.展开更多
Cyclopropylamine is synthesized with γ butyrolactone and isopropanol by five steps of ring opening esterification, cyclization, hydrolysis, acylation and Hofmann degradation. Cyclization and hydrolysis are key steps ...Cyclopropylamine is synthesized with γ butyrolactone and isopropanol by five steps of ring opening esterification, cyclization, hydrolysis, acylation and Hofmann degradation. Cyclization and hydrolysis are key steps in the process, and Phase Transfer Catalysis (PTC) is used in the two steps respectively. In the cyclization reaction, because solid liquid PTC, sodium hydroxide is applied instead of expensive sodium alcoholate, the reaction can be carried out in mild conditions. The optimum re action conditions are as follows: 0.03∶1∶1.5 mole ratio of BTEAC to ester to sodium hydroxide, reacting at 50 ℃ for 2 h with yield of 92%. Hydrolysis of isopropyl cyclopropanecarboxylate is accelerated by liquid liquid PTC, and the order of catalytic activity is BTEAC>BTMAC>CTMAB>TBAB. The results show that the new synthesis method is superior to those from literature and feasible for production with simple routes, mild reaction conditions, cheap materials and total yield of 52.6%.展开更多
Introduction Microwave irradiation has been very widely used in heating, cooking and brewing. Several papers which describe the use of domestic microwave ovens to perform rapid organic synthesis in solution have been ...Introduction Microwave irradiation has been very widely used in heating, cooking and brewing. Several papers which describe the use of domestic microwave ovens to perform rapid organic synthesis in solution have been published. The high heating efficiency gives rise to remarkable rate of reaction and dramatic reduction of reaction time. Nevertheless, its application seems to be limited to these procedures because of展开更多
p nitrophenol is synthesized using p nitrochlorobenzene and sodium hydroxide with phase transfer catalyst. Several reaction factors, such as catalyst type, the amounts of catalysts and sodium hydroxide, the concentrat...p nitrophenol is synthesized using p nitrochlorobenzene and sodium hydroxide with phase transfer catalyst. Several reaction factors, such as catalyst type, the amounts of catalysts and sodium hydroxide, the concentration of sodium hydroxide solution as well as reaction time, affect greatly the yield of p nitrophenol. The optimum reaction conditions are as follows: A 1 used as phase transfer catalyst whose consumption is 6% (mole fraction) of p nitrochlorobenzene; the molar ratio of sodium hydroxide to p nitrochlorobenzene is 3:1; the concentration of sodium hydroxide solution is 50% (mass fraction). Nitrobenzene, whose molar amount is 2.45 times as much as that of p nitrochlorobenzene; reaction time is 7 h at 140 ℃ under normal pressure. The final yield of p nitrophenol is 83.6%.展开更多
Several thiourea polymers have been synthesized through the reaction of diamine with 1, 4- or 1, 3- benzenedicarbonyl chloride and ammonium thiocyanate by solid-liquid phase transfer catalysis of polyethylene glycol-4...Several thiourea polymers have been synthesized through the reaction of diamine with 1, 4- or 1, 3- benzenedicarbonyl chloride and ammonium thiocyanate by solid-liquid phase transfer catalysis of polyethylene glycol-400 (PEG-400). The polymers were characterized and identified by elemental analysis, IR, 1HNMR and GPC. The multifunctional polymers have potential value as an ideal support for immobilized enzymes.展开更多
The syntheses of three naturally occurring diphyllin glycosides have been achieved. 7-O-β-D-Qtfmovopyranosyldiphyllin （patentiflorin A） and 7-O-β-L-fucopyranosyldiphyllin （patentiflorin B） were synthesized by th...The syntheses of three naturally occurring diphyllin glycosides have been achieved. 7-O-β-D-Qtfmovopyranosyldiphyllin （patentiflorin A） and 7-O-β-L-fucopyranosyldiphyllin （patentiflorin B） were synthesized by the glycosylation of diphyllin with peracetylglycosyl bromides under phase transfer catalysis （PTC） conditions. 4＂-O-Acetyl-7-O-β-L-fucopyranosyldiphyllin （4＂-O-acetyl patentiflorin B） was obtained from patentiflorin B on an orthoesterification-orthoester rearrangement approach. Their ^1H NMR, ^13C NMR and HRMS signals are all consistent with those reported for the natural product.展开更多
Ten new 1 aryloxyacetyl 4 (2 nitrobenzoyl) thiosemicarbazides(Ⅲ) were synthesized under the condition of solid liquid phase transfer catalysis, and compounds Ⅲ on further reaction with acetic acid gives ten 2 (2 nit...Ten new 1 aryloxyacetyl 4 (2 nitrobenzoyl) thiosemicarbazides(Ⅲ) were synthesized under the condition of solid liquid phase transfer catalysis, and compounds Ⅲ on further reaction with acetic acid gives ten 2 (2 nitrobenzoylamido) 5 aryloxymethyl 1,3,4 thiadiazoles(Ⅳ). Compounds Ⅲ and Ⅳ were characterized by elemental analysis, IR and 1H NMR. The preliminary promoting effects of compounds Ⅲ and Ⅳ on wheat growth were also tested.展开更多
文摘A simple and general method for the synthesis of bi(acyl)disulfides is reported.Sulfur is allowed to react with sodium hydroxide to give sodium disulfide at 65℃ under PTC,which can react with acyl halides to afford bi(acyl)disulfides in good to excellent isolated yields.The effects of solvents and phase transfer catalysts are discussed.
文摘Seven diaryl ethers were synthesized with potassium fluoride coated alumina as a strong base and the addition of catalytic amount of PTC. The yield of diaryl ethers with addition of PTC was much higher than that without PTC.A discussion of the catalysis mechanism was given in this paper.
文摘The acetylated xylo-and arabinopyranosyl esters(1-8) were obtained in high yields with stereoselectivity by phase-transfer catalyzed (PTC) synthesis, and their structures were confirmed by elemental analysis and IR,^(1)H-NMR spectral data.
基金The Science and Research Foundation of Education Commission of Hunan Province
文摘Cyclopropylamine is synthesized with γ butyrolactone and isopropanol by five steps of ring opening esterification, cyclization, hydrolysis, acylation and Hofmann degradation. Cyclization and hydrolysis are key steps in the process, and Phase Transfer Catalysis (PTC) is used in the two steps respectively. In the cyclization reaction, because solid liquid PTC, sodium hydroxide is applied instead of expensive sodium alcoholate, the reaction can be carried out in mild conditions. The optimum re action conditions are as follows: 0.03∶1∶1.5 mole ratio of BTEAC to ester to sodium hydroxide, reacting at 50 ℃ for 2 h with yield of 92%. Hydrolysis of isopropyl cyclopropanecarboxylate is accelerated by liquid liquid PTC, and the order of catalytic activity is BTEAC>BTMAC>CTMAB>TBAB. The results show that the new synthesis method is superior to those from literature and feasible for production with simple routes, mild reaction conditions, cheap materials and total yield of 52.6%.
文摘Introduction Microwave irradiation has been very widely used in heating, cooking and brewing. Several papers which describe the use of domestic microwave ovens to perform rapid organic synthesis in solution have been published. The high heating efficiency gives rise to remarkable rate of reaction and dramatic reduction of reaction time. Nevertheless, its application seems to be limited to these procedures because of
文摘p nitrophenol is synthesized using p nitrochlorobenzene and sodium hydroxide with phase transfer catalyst. Several reaction factors, such as catalyst type, the amounts of catalysts and sodium hydroxide, the concentration of sodium hydroxide solution as well as reaction time, affect greatly the yield of p nitrophenol. The optimum reaction conditions are as follows: A 1 used as phase transfer catalyst whose consumption is 6% (mole fraction) of p nitrochlorobenzene; the molar ratio of sodium hydroxide to p nitrochlorobenzene is 3:1; the concentration of sodium hydroxide solution is 50% (mass fraction). Nitrobenzene, whose molar amount is 2.45 times as much as that of p nitrochlorobenzene; reaction time is 7 h at 140 ℃ under normal pressure. The final yield of p nitrophenol is 83.6%.
基金This project is supported by the National Natural Science Foundation of China(Contract grant number:29872061,20032020).
文摘Several thiourea polymers have been synthesized through the reaction of diamine with 1, 4- or 1, 3- benzenedicarbonyl chloride and ammonium thiocyanate by solid-liquid phase transfer catalysis of polyethylene glycol-400 (PEG-400). The polymers were characterized and identified by elemental analysis, IR, 1HNMR and GPC. The multifunctional polymers have potential value as an ideal support for immobilized enzymes.
基金Project supported by the National Natural Science Foundation of China （No. 30400564）.
文摘The syntheses of three naturally occurring diphyllin glycosides have been achieved. 7-O-β-D-Qtfmovopyranosyldiphyllin （patentiflorin A） and 7-O-β-L-fucopyranosyldiphyllin （patentiflorin B） were synthesized by the glycosylation of diphyllin with peracetylglycosyl bromides under phase transfer catalysis （PTC） conditions. 4＂-O-Acetyl-7-O-β-L-fucopyranosyldiphyllin （4＂-O-acetyl patentiflorin B） was obtained from patentiflorin B on an orthoesterification-orthoester rearrangement approach. Their ^1H NMR, ^13C NMR and HRMS signals are all consistent with those reported for the natural product.
文摘Ten new 1 aryloxyacetyl 4 (2 nitrobenzoyl) thiosemicarbazides(Ⅲ) were synthesized under the condition of solid liquid phase transfer catalysis, and compounds Ⅲ on further reaction with acetic acid gives ten 2 (2 nitrobenzoylamido) 5 aryloxymethyl 1,3,4 thiadiazoles(Ⅳ). Compounds Ⅲ and Ⅳ were characterized by elemental analysis, IR and 1H NMR. The preliminary promoting effects of compounds Ⅲ and Ⅳ on wheat growth were also tested.
