In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medic...In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medical textiles.The surface morphology and the chemical structure of the masterbatches were analyzed.The crystallization,mass losses,strengths and drug-release rates of the composite masterbatches at different PCL/PGA mass ratios were explored.The results show that the degradation rate of the PGA carrier is obvious higher than that of the PCL carrier,and PCL,PGA and the tea polyphenol(TP) drug just physically mix without chemical reaction.During the degradation,the strength of the composite masterbatches gradually decreases.In addition,the drug-release rates of composite masterbatches at different mass ratios are different,and the more the PGA in the composite masterbatches,the faster the drug release of the composite masterbatches.The drug-release rate of the composite masterbatches can be controlled by adjusting the contents of PCL and PGA.展开更多
Reference Standard Dosimeters are used to calibrate radiation environments and routine dosimeters. It can also be used in routine dosimetry applications for radiation processing where higher quality dosimetry measurem...Reference Standard Dosimeters are used to calibrate radiation environments and routine dosimeters. It can also be used in routine dosimetry applications for radiation processing where higher quality dosimetry measurements are required. Electron Spin Resonance (ESR) is a well-established Reference Standard Dosimetry system in industrial applications of ionising radiation, and its use is also proposed in radiation therapy and accident dosimetry. In the present experimental work, PGA solid state dosimeter (SSD) has been investigated using ESR spectroscopy to study the gamma radiation response of this material and to evaluate its dosimetric characteristics: dose response, room temperature fading, heat treatment effect during post-irradiation storage. Results obtained up to now confirm that PGA seems to be suitable material for ESR dosimetry applications.展开更多
目的可吸收生物材料聚羟乙酸(PGA)与成纤维细胞已被证实可以应用于体外组织工程肌腱的构建,本试验旨在探讨应用人皮肤成纤维细胞与PGA在体外进行组织构建时的适宜接种浓度。方法酶消化法获得人皮肤成纤维细胞经体外培养、扩增至第2代,...目的可吸收生物材料聚羟乙酸(PGA)与成纤维细胞已被证实可以应用于体外组织工程肌腱的构建,本试验旨在探讨应用人皮肤成纤维细胞与PGA在体外进行组织构建时的适宜接种浓度。方法酶消化法获得人皮肤成纤维细胞经体外培养、扩增至第2代,按照低、中、高三种浓度接种于PGA材料分别作为实验组1、2、3,传统浓度细胞接种的作为对照组,各组样本数n均为3,分别于接种后3天、1周、2周和4周进行观察和检测。结果接种后3天实验各组无明显差异,细胞在材料上黏附伸展良好。1周和2周时,各组细胞均有明显增殖,并分泌细胞外基质(ECM extra cellular matrix),但实验组1、2的ECM不如实验组3和对照组丰富,此后该现象更为明显。至第4周时,实验组1仅形成厚薄不均的薄膜状物,其余三组均形成组织样结构,但实验组2形成的细胞--材料复合物结构略为松散。结论应用本实验组中高浓度接种皮肤成纤维细胞在体外构建工程化组织可以达到传统所用更高浓度的接种效果,以节约细胞,减少取材。展开更多
Acupoint catgut embedding therapy(ACET),filling the gaps of traditional Chinese medicine acupuncture treatment,has been widely used for the treatment of many diseases with significant effects.The aim of this paper is ...Acupoint catgut embedding therapy(ACET),filling the gaps of traditional Chinese medicine acupuncture treatment,has been widely used for the treatment of many diseases with significant effects.The aim of this paper is to obtain polyglycollide acid(PGA)fibers with higher performance at a lower cost,and ensure that PGA can meet the clinical requirements as well.PGA fibers with different diameters were spun as embedding materials.The mechanical performance,thermodynamic and biodegradable properties of PGA fibers were studied under different spinning process parameters,including spinning speed,drawing temperature and stretching ratio.The experimental results showed that the optimum spinning parameters were the spinning speed at 150 m/min,the drawing temperature of 45 ℃,and the stretching ratio of 4.0.The initial modulus of PGA fibers was 3.876 N/tex.The crystallization degree was 68% and the degradation performance was in consistent with treatment cycle of patients.展开更多
Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strengt...Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strength as the same time. PGA fibers are dipped in H_2O_2 solution a certain time for modification. Scanning electron microscopy( SEM) was used to observe the surface morphology of PGA fibers before and after modification. The varying of PGA macromolecule was examined with Fourier transform infrared spectroscopy( FTIR) analyses. X-ray diffraction( XRD) and differential scanning calorimetry( DSC) analysis showed that crystallinity slightly decreases. Mechanical performance test showed tensile force of modified PGA fiber was increased. The water contact angle test indicated the improving of hydrophilic. A cell proliferation assay showed that fibroblast cells attach and proliferate well on the fibers, which meant the modified fibers possess good cytocompatibility. These results suggest that H_2O_2 surface modification is easy to operate and a advantageous modification method for PGA fibers.展开更多
In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture abso...In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture absorption, and moisture retention abilities. In this study, we synthesized alkyl esterified poly-γ-glutamic acid (PGA) with various chain lengths and degrees of substitution of the alkyl moieties to examine how hydrophobic groups incorporated in the anionic polymer contribute to enhanced emulsification, moisture absorption, and moisture retention. With a low degree of alkylation of PGA, these abilities were drastically improved. To improve the moisture absorption of PGA, alkylation with a short chain length is effective in forming interspaces between PGA chains to trap water molecules. Hydrophobic-hydrophilic balance may also be important to improve the emulsification and moisture retention abilities of PGA alkylates. To the best of our knowledge, this is the first report of the relationship between the structure and the multifunctional abilities of an anionic polymer incorporated with a small amount of hydrophobic residue. PGA alkylates, as well as fatty acid-containing polysaccharides, have potential use as multifunctional surfactants throughout various industries.展开更多
Poly(glycolic acid)(PGA)is derived from glycolide obtained by fermenting pineapples or sugarcane,which has excellent gas barrier properties and a small carbon footprint.PGA is a potential substitute for the current al...Poly(glycolic acid)(PGA)is derived from glycolide obtained by fermenting pineapples or sugarcane,which has excellent gas barrier properties and a small carbon footprint.PGA is a potential substitute for the current aluminum-plastic composite films used in high barrier packaging applications.However,its poor ductility and narrow processing window limit its application in food packaging.Herein,poly(butylene succinate-co-butylene adipate)(PBSA)was used to fabricate PGA/PBSA blend films through an in situ fibrillation technique and blown film extrusion.Under the elongational flow field used during the extrusion process,a unique hierarchical structure based on the PBSA nanofibrils and interfacially oriented PGA crystals was obtained.This structure enhances the strength,ductility and gas barrier properties of the PGA/PBSA blend film.In addition,an epoxy chain extender(ADR4468)was used as a compatibilizer to further enhance the interfacial adhesion between PGA and PBSA.70PGA/0.7ADR exhibited a very low oxygen permeability(2.34×10^(-4)Barrer)with significantly high elongating at break(604.4%),tensile strength(47.4 MPa),and transparency,which were superior to those of petroleum-based polymers.Thus,the 70PGA/0.7ADR blown films could satisfy the requirements for most instant foods such as coffee,peanuts,and fresh meat.展开更多
基金Transformation and Guidance of Scientific and Technological Achievements in Shanxi Province,China(No.202104021301053)Fundamental Research Program of Shanxi Province,China(Nos. 20210302123114 and 202203021211146)+1 种基金Transformation of Scientific and Technological Achievements Programs of Higher Education Institutions in Shanxi Province,China(TSTAP)(No. 2020CG014)Open Project Program of Key Lab for Sport Shoes Upper Materials of Fujian Province,Fujian Huafeng New Material Co.,Ltd.,China(No.S SUM213)。
文摘In order to effectively control the drug-release rate of medical textiles,biodegradable polycaprolactone(PCL) and polyglycolic acid(PGA) were blended at various mass ratios to prepare composite masterbatches for medical textiles.The surface morphology and the chemical structure of the masterbatches were analyzed.The crystallization,mass losses,strengths and drug-release rates of the composite masterbatches at different PCL/PGA mass ratios were explored.The results show that the degradation rate of the PGA carrier is obvious higher than that of the PCL carrier,and PCL,PGA and the tea polyphenol(TP) drug just physically mix without chemical reaction.During the degradation,the strength of the composite masterbatches gradually decreases.In addition,the drug-release rates of composite masterbatches at different mass ratios are different,and the more the PGA in the composite masterbatches,the faster the drug release of the composite masterbatches.The drug-release rate of the composite masterbatches can be controlled by adjusting the contents of PCL and PGA.
文摘Reference Standard Dosimeters are used to calibrate radiation environments and routine dosimeters. It can also be used in routine dosimetry applications for radiation processing where higher quality dosimetry measurements are required. Electron Spin Resonance (ESR) is a well-established Reference Standard Dosimetry system in industrial applications of ionising radiation, and its use is also proposed in radiation therapy and accident dosimetry. In the present experimental work, PGA solid state dosimeter (SSD) has been investigated using ESR spectroscopy to study the gamma radiation response of this material and to evaluate its dosimetric characteristics: dose response, room temperature fading, heat treatment effect during post-irradiation storage. Results obtained up to now confirm that PGA seems to be suitable material for ESR dosimetry applications.
文摘目的可吸收生物材料聚羟乙酸(PGA)与成纤维细胞已被证实可以应用于体外组织工程肌腱的构建,本试验旨在探讨应用人皮肤成纤维细胞与PGA在体外进行组织构建时的适宜接种浓度。方法酶消化法获得人皮肤成纤维细胞经体外培养、扩增至第2代,按照低、中、高三种浓度接种于PGA材料分别作为实验组1、2、3,传统浓度细胞接种的作为对照组,各组样本数n均为3,分别于接种后3天、1周、2周和4周进行观察和检测。结果接种后3天实验各组无明显差异,细胞在材料上黏附伸展良好。1周和2周时,各组细胞均有明显增殖,并分泌细胞外基质(ECM extra cellular matrix),但实验组1、2的ECM不如实验组3和对照组丰富,此后该现象更为明显。至第4周时,实验组1仅形成厚薄不均的薄膜状物,其余三组均形成组织样结构,但实验组2形成的细胞--材料复合物结构略为松散。结论应用本实验组中高浓度接种皮肤成纤维细胞在体外构建工程化组织可以达到传统所用更高浓度的接种效果,以节约细胞,减少取材。
基金“111 Project” Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘Acupoint catgut embedding therapy(ACET),filling the gaps of traditional Chinese medicine acupuncture treatment,has been widely used for the treatment of many diseases with significant effects.The aim of this paper is to obtain polyglycollide acid(PGA)fibers with higher performance at a lower cost,and ensure that PGA can meet the clinical requirements as well.PGA fibers with different diameters were spun as embedding materials.The mechanical performance,thermodynamic and biodegradable properties of PGA fibers were studied under different spinning process parameters,including spinning speed,drawing temperature and stretching ratio.The experimental results showed that the optimum spinning parameters were the spinning speed at 150 m/min,the drawing temperature of 45 ℃,and the stretching ratio of 4.0.The initial modulus of PGA fibers was 3.876 N/tex.The crystallization degree was 68% and the degradation performance was in consistent with treatment cycle of patients.
基金Shanghai Science and Technical Committee,China(No.10411953300)State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,China(No.LZ0902)Minhang District Industry-Study-Research Cooperation,China(No.2012MH202)
文摘Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strength as the same time. PGA fibers are dipped in H_2O_2 solution a certain time for modification. Scanning electron microscopy( SEM) was used to observe the surface morphology of PGA fibers before and after modification. The varying of PGA macromolecule was examined with Fourier transform infrared spectroscopy( FTIR) analyses. X-ray diffraction( XRD) and differential scanning calorimetry( DSC) analysis showed that crystallinity slightly decreases. Mechanical performance test showed tensile force of modified PGA fiber was increased. The water contact angle test indicated the improving of hydrophilic. A cell proliferation assay showed that fibroblast cells attach and proliferate well on the fibers, which meant the modified fibers possess good cytocompatibility. These results suggest that H_2O_2 surface modification is easy to operate and a advantageous modification method for PGA fibers.
文摘In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture absorption, and moisture retention abilities. In this study, we synthesized alkyl esterified poly-γ-glutamic acid (PGA) with various chain lengths and degrees of substitution of the alkyl moieties to examine how hydrophobic groups incorporated in the anionic polymer contribute to enhanced emulsification, moisture absorption, and moisture retention. With a low degree of alkylation of PGA, these abilities were drastically improved. To improve the moisture absorption of PGA, alkylation with a short chain length is effective in forming interspaces between PGA chains to trap water molecules. Hydrophobic-hydrophilic balance may also be important to improve the emulsification and moisture retention abilities of PGA alkylates. To the best of our knowledge, this is the first report of the relationship between the structure and the multifunctional abilities of an anionic polymer incorporated with a small amount of hydrophobic residue. PGA alkylates, as well as fatty acid-containing polysaccharides, have potential use as multifunctional surfactants throughout various industries.
基金the National Key Research and Development Program of China(No.2022YFB3704900)the National Natural Science Foundation of China(No.52073004)China National Tobacco Corporation Guizhou Company(No.2023XM24)。
文摘Poly(glycolic acid)(PGA)is derived from glycolide obtained by fermenting pineapples or sugarcane,which has excellent gas barrier properties and a small carbon footprint.PGA is a potential substitute for the current aluminum-plastic composite films used in high barrier packaging applications.However,its poor ductility and narrow processing window limit its application in food packaging.Herein,poly(butylene succinate-co-butylene adipate)(PBSA)was used to fabricate PGA/PBSA blend films through an in situ fibrillation technique and blown film extrusion.Under the elongational flow field used during the extrusion process,a unique hierarchical structure based on the PBSA nanofibrils and interfacially oriented PGA crystals was obtained.This structure enhances the strength,ductility and gas barrier properties of the PGA/PBSA blend film.In addition,an epoxy chain extender(ADR4468)was used as a compatibilizer to further enhance the interfacial adhesion between PGA and PBSA.70PGA/0.7ADR exhibited a very low oxygen permeability(2.34×10^(-4)Barrer)with significantly high elongating at break(604.4%),tensile strength(47.4 MPa),and transparency,which were superior to those of petroleum-based polymers.Thus,the 70PGA/0.7ADR blown films could satisfy the requirements for most instant foods such as coffee,peanuts,and fresh meat.
