To gain insight into the inelastic behavior of piles, the response of a vertical pile embedded in dry sand and subjected to cyclic lateral loading was studied experimentally in centrifuge tests conducted in Laboratoir...To gain insight into the inelastic behavior of piles, the response of a vertical pile embedded in dry sand and subjected to cyclic lateral loading was studied experimentally in centrifuge tests conducted in Laboratoire Central des Ponts et Chaussees. Three types of cyclic loading were applied, two asymmetric and one symmetric with respect to the unloaded pile. An approximately square-root variation of soil stiffness with depth was obtained from indirect in-flight density measurements, laboratory tests on reconstituted samples, and well-established empirical correlations. The tests were simulated using a cyclic nonlinear Winkler spring model, which describes the full range of inelastic phenomena, including separation and re-attachment of the pile from and to the soil. The model consists of three mathematical expressions capable of reproducing a wide variety of monotonic and cyclic experimentalp-y curves. The physical meaning of key model parameters is graphically explained and related to soil behavior. Comparisons with the centrifuge test results demonstrate the general validity of the model and its ability to capture several features of pile-soil interaction, including： soil plastification at an early stage of loading, ＂pinching＂ behavior due to the formation of a relaxation zone around the upper part of the pile, and stiffness and strength changes due to cyclic loading. A comparison of the p-y curves derived from the test results and the proposed model, as well as those from the classical curves of Reese et al. （1974） for sand, is also presented.展开更多
Based on theoretical analysis and studying other methods, P-III curve is transformed into an incomplete G function by means of mathematical expression transformation, thus the mathematical model of the fast commonly-u...Based on theoretical analysis and studying other methods, P-III curve is transformed into an incomplete G function by means of mathematical expression transformation, thus the mathematical model of the fast commonly-used algorithm is drawn out. Algorithm comparison and practices demonstrate that the mathematical model has an easy algorithm, agile resolution process, very good commonality, faster convergence rate and better calculation accuracy, and can be applied to other respects.展开更多
基金EU Fifth Framework Program: Environment, Energy and Sustainable Development Research and Technological Development Activity of Generic Nature: The Fight Against Natural and Technological Hazards, Research Project QUAKER Under Contract No. EVG1–CT–2002–00064
文摘To gain insight into the inelastic behavior of piles, the response of a vertical pile embedded in dry sand and subjected to cyclic lateral loading was studied experimentally in centrifuge tests conducted in Laboratoire Central des Ponts et Chaussees. Three types of cyclic loading were applied, two asymmetric and one symmetric with respect to the unloaded pile. An approximately square-root variation of soil stiffness with depth was obtained from indirect in-flight density measurements, laboratory tests on reconstituted samples, and well-established empirical correlations. The tests were simulated using a cyclic nonlinear Winkler spring model, which describes the full range of inelastic phenomena, including separation and re-attachment of the pile from and to the soil. The model consists of three mathematical expressions capable of reproducing a wide variety of monotonic and cyclic experimentalp-y curves. The physical meaning of key model parameters is graphically explained and related to soil behavior. Comparisons with the centrifuge test results demonstrate the general validity of the model and its ability to capture several features of pile-soil interaction, including： soil plastification at an early stage of loading, ＂pinching＂ behavior due to the formation of a relaxation zone around the upper part of the pile, and stiffness and strength changes due to cyclic loading. A comparison of the p-y curves derived from the test results and the proposed model, as well as those from the classical curves of Reese et al. （1974） for sand, is also presented.
文摘Based on theoretical analysis and studying other methods, P-III curve is transformed into an incomplete G function by means of mathematical expression transformation, thus the mathematical model of the fast commonly-used algorithm is drawn out. Algorithm comparison and practices demonstrate that the mathematical model has an easy algorithm, agile resolution process, very good commonality, faster convergence rate and better calculation accuracy, and can be applied to other respects.
