The precipitation and gettering behaviors of copper （Cu） at different defective regions in multicrystalline silicon were investigated by combining scanning infrared microscopy, optical microscopy, inductively couple...The precipitation and gettering behaviors of copper （Cu） at different defective regions in multicrystalline silicon were investigated by combining scanning infrared microscopy, optical microscopy, inductively coupled plasma mass spectrometry and microwave photo-conductance decay. It is found that the behaviors of Cu precipitation are strongly dependent on the defect density. Most of the Cu contaminants tend to form precipitates homogeneously in the low density defect region, while they mostly segregate at the defects and form precipitates heterogeneously in the high density defect region. In the case of heavy contamination, the Cu precipitate can significantly reduce the carrier lifetime of multicrystalline silicon due to their Schottkydiode behavior in the silicon substrate. A 900 °C rap thermal process （RTP） phosphorus gettering anneal cannot be sufficiently effective to remove the Cu precipitates in these two regions.展开更多
基金Projects (60906002, 50832006) supported by the National Natural Science Foundation of ChinaProject (2009QNA4007) supported by the Fundamental Research Funds for the Central Universities, China
文摘The precipitation and gettering behaviors of copper （Cu） at different defective regions in multicrystalline silicon were investigated by combining scanning infrared microscopy, optical microscopy, inductively coupled plasma mass spectrometry and microwave photo-conductance decay. It is found that the behaviors of Cu precipitation are strongly dependent on the defect density. Most of the Cu contaminants tend to form precipitates homogeneously in the low density defect region, while they mostly segregate at the defects and form precipitates heterogeneously in the high density defect region. In the case of heavy contamination, the Cu precipitate can significantly reduce the carrier lifetime of multicrystalline silicon due to their Schottkydiode behavior in the silicon substrate. A 900 °C rap thermal process （RTP） phosphorus gettering anneal cannot be sufficiently effective to remove the Cu precipitates in these two regions.
