Hydrogen(H2)production is a latent feasibility of renewable clean energy.The industrial H2 production is obtained from reforming of natural gas,which consumes a large amount of nonrenewable energy and simultaneously p...Hydrogen(H2)production is a latent feasibility of renewable clean energy.The industrial H2 production is obtained from reforming of natural gas,which consumes a large amount of nonrenewable energy and simultaneously produces greenhouse gas carbon dioxide.Electrochemical water splitting is a promising approach for the H2 production,which is sustainable and pollution-free.Therefore,developing efficient and economic technologies for electrochemical water splitting has been an important goal for researchers around the world.The utilization of green energy systems to reduce overall energy consumption is more important for H2 production.Harvesting and converting energy from the environment by different green energy systems for water splitting can efficiently decrease the external power consumption.A variety of green energy systems for efficient producing H2,such as two-electrode electrolysis of water,water splitting driven by photoelectrode devices,solar cells,thermoelectric devices,triboelectric nanogenerator,pyroelectric device or electrochemical water-gas shift device,have been developed recently.In this review,some notable progress made in the different green energy cells for water splitting is discussed in detail.We hoped this review can guide people to pay more attention to the development of green energy system to generate pollution-free H2 energy,which will realize the whole process of H2 production with low cost,pollution-free and energy sustainability conversion.展开更多
Fabrication of stable,reproducible and reusable reference electrodes for low energy and high-temperature steam splitting is of great interest for hydrogen fuel production without anthropogenic carbon dioxide(CO2)emiss...Fabrication of stable,reproducible and reusable reference electrodes for low energy and high-temperature steam splitting is of great interest for hydrogen fuel production without anthropogenic carbon dioxide(CO2)emission.This study has been conducted for the detection of suitable material for the fabrication of novel reference electrode.In the present scenario,this research is designed to fabricate a novel nickel reference electrode by using operating conditions of eutectic molten hydroxide(NaOH-KOH,49-51 mol%)at temperature 300℃in an ion-conducting membrane of alumina and mullite tube.Afterwards,the designed nickel reference electrode has been examined for its reusability and stability by using electrochemical technique and cyclic voltammetry.Five scans of cyclic voltammetry are performed for both membrane fabricated reference electrode.A slight positive shift in oxidation peaks is observed for mullite membrane electrode(64 mV from scan 1 to 5).The stability measurements are noted by changing the scan rate between 50 and 150 mV s−1.Furthermore,the results show that the Ni/Ni(OH)2 reference electrode covered with a mullite membrane is stable and reusable at 300℃temperature without any deterioration.The stability and reusability of prepared nickel reference electrode covered by mullite tube in the eutectic molten hydroxide were up to 9 days to carry out an electrochemical investigation,while for alumina tube reference electrode the stability and reliability were up to 3 days.The internal electrolytic material and ionic conductance can play an important role for future studies with this reference electrode along with optimisation of temperature and scan rate parameters.展开更多
In recent years, the scale of use of fuel cells （FCs） has been increasing continuously. One of the essential elements that affect their work is a catalyst. Precious metals （mainly platinum） are known for their hig...In recent years, the scale of use of fuel cells （FCs） has been increasing continuously. One of the essential elements that affect their work is a catalyst. Precious metals （mainly platinum） are known for their high efficiency as FC catalysts. However, their high cost holds back the FCs from application on a large scale. Therefore, catalysts that do not contain precious metals are sought. Studies are focused mainly on the search for fuel electrode catalysts, but for the efficiency of FCs also the oxygen electrode catalyst is of great significance. The paper presents an analysis of the possibilitiesof using Ni-Co alloy as a catalyst for the oxygen electrode of the FC.展开更多
基金supported by Taishan Scholars Project Special Funds(tsqn201812083)Natural Science Foundation of Shandong Province(ZR2019YQ20,2019JMRH0410)the National Natural Science Foundation of China(51972147)。
文摘Hydrogen(H2)production is a latent feasibility of renewable clean energy.The industrial H2 production is obtained from reforming of natural gas,which consumes a large amount of nonrenewable energy and simultaneously produces greenhouse gas carbon dioxide.Electrochemical water splitting is a promising approach for the H2 production,which is sustainable and pollution-free.Therefore,developing efficient and economic technologies for electrochemical water splitting has been an important goal for researchers around the world.The utilization of green energy systems to reduce overall energy consumption is more important for H2 production.Harvesting and converting energy from the environment by different green energy systems for water splitting can efficiently decrease the external power consumption.A variety of green energy systems for efficient producing H2,such as two-electrode electrolysis of water,water splitting driven by photoelectrode devices,solar cells,thermoelectric devices,triboelectric nanogenerator,pyroelectric device or electrochemical water-gas shift device,have been developed recently.In this review,some notable progress made in the different green energy cells for water splitting is discussed in detail.We hoped this review can guide people to pay more attention to the development of green energy system to generate pollution-free H2 energy,which will realize the whole process of H2 production with low cost,pollution-free and energy sustainability conversion.
文摘Fabrication of stable,reproducible and reusable reference electrodes for low energy and high-temperature steam splitting is of great interest for hydrogen fuel production without anthropogenic carbon dioxide(CO2)emission.This study has been conducted for the detection of suitable material for the fabrication of novel reference electrode.In the present scenario,this research is designed to fabricate a novel nickel reference electrode by using operating conditions of eutectic molten hydroxide(NaOH-KOH,49-51 mol%)at temperature 300℃in an ion-conducting membrane of alumina and mullite tube.Afterwards,the designed nickel reference electrode has been examined for its reusability and stability by using electrochemical technique and cyclic voltammetry.Five scans of cyclic voltammetry are performed for both membrane fabricated reference electrode.A slight positive shift in oxidation peaks is observed for mullite membrane electrode(64 mV from scan 1 to 5).The stability measurements are noted by changing the scan rate between 50 and 150 mV s−1.Furthermore,the results show that the Ni/Ni(OH)2 reference electrode covered with a mullite membrane is stable and reusable at 300℃temperature without any deterioration.The stability and reusability of prepared nickel reference electrode covered by mullite tube in the eutectic molten hydroxide were up to 9 days to carry out an electrochemical investigation,while for alumina tube reference electrode the stability and reliability were up to 3 days.The internal electrolytic material and ionic conductance can play an important role for future studies with this reference electrode along with optimisation of temperature and scan rate parameters.
文摘In recent years, the scale of use of fuel cells （FCs） has been increasing continuously. One of the essential elements that affect their work is a catalyst. Precious metals （mainly platinum） are known for their high efficiency as FC catalysts. However, their high cost holds back the FCs from application on a large scale. Therefore, catalysts that do not contain precious metals are sought. Studies are focused mainly on the search for fuel electrode catalysts, but for the efficiency of FCs also the oxygen electrode catalyst is of great significance. The paper presents an analysis of the possibilitiesof using Ni-Co alloy as a catalyst for the oxygen electrode of the FC.
