Improvement Detecting Method of Optical Axes Parallelism of Shipboard Photoelectrical Theodolite Based on Image Processing

An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Pointolite replaced 0.2'' collimator to reduce the errors of crosshair images processing and improve the quality of image. What’s more, the high quality images could help to optimize the image processing method and the testing accuracy. The errors between the trial results interpreted by software and the results tested in dock were less than 10'', which indicated the improve method had some actual application values.

Significant photoelectrical response of epitaxial graphene grown on Si-terminated 6H-SiC

Photoelectrical response characteristics of epitaxial graphene （EG） films on Si- and C-terminated 6H-SiC, and transferred chemical vapor deposition （CVD） graphene films on Si-terminated 6H-SiC have been investigated. The results show that upon illumination by a xenon lamp, the photocurrent of EG grown on Si-terminated SiC significantly increases by 147.6%, while the photocurrents of EG grown on C-terminated SiC, and transferred CVD graphene on Si-terminated SiC slightly decrease by 0.5% and 2.7%, respectively. The interfacial buffer layer between EG and Si-terminated 6H-SiC is responsible for the significant photoelectrical response of EG. Its strong photoelectrical response makes it promising for optoelectronic applications.

Electric field and photoelectrical effect bi-enhanced hydrogen evolution reaction

Molybdenum disulfide （MoS2） is an earth-abundant and low-cost hydrogen evolving electrocatalyst with the potential to replace traditional noble metal catalysts. The catalytic activity can be significantly enhanced after modification due to higher conductivity and enriched active sites. However, the underlying mechanism of the influence of the resistance of electrode material and contact resistance on the hydrogen evolution reaction （HER） process is unclear. Herein, we present a systematic study to understand the relationship between HER performance and electrode conductivity, which is bi-tuned through the electric field and photoelectrical effect. It was found that the onset overpotential consistently decreased with the increase of electrode conductivity. In addition, the reduction of the contact resistance resulted in a quicker electrochemical reaction process than enhancing the conductivity of the MoS2 nanosheet. An onset overpotential of 89 mV was achieved under 60 mW/cm^2 sunlight illumination （0.6 sun） and a simultaneous gate voltage of 3 V. These physical strategies can also be applied to other catalysts, and offer new directions to improve HER catalytic performance of semiconductor materials.

Printed thin film transistors with 10^(8)on/off ratios and photoelectrical synergistic characteristics using isoindigo-based polymers-enriched(9,8)carbon nanotubes

Monochiral single-walled carbon nanotubes(SWCNTs)can enable high-performance carbon-based electronic devices and integrated circuits.However,their fabrication often requires complex SWCNT purification and enrichment.Herein,we showed that isoindigo-based polymer derivatives(PDPPIID and PFIID)directly enriched(9,8)nanotubes from as-synthesized SWCNT powders selectively and efficiently to yield high concentration(9,8)nanotube inks.The selective wrapping mechanism was elucidated by classical full-atomistic molecular dynamic(MD)simulations.Thin-film transistors(TFTs)were fabricated by depositing the SWCNT ink into device channels using aerosol jet printing.TFT performance was strongly influenced by polymer residues,the deposition condition(humidity),and ink concentration.Optimized TFTs showed excellent device-to-device uniformity with 108 on/off ratios.Further,optoelectronic transistors were fabricated,and their photoelectrical neuromorphic characteristics,storage,memory,and logic functions were characterized under the pulsed light and voltage stimulations,demonstrating excellent application potentials.

In-fiber photoelectric device based on graphene-coated tilted fiber grating

Graphene and related two-dimensional materials have attracted great research interests due to prominently optical and electrical properties and flexibility in integration with versatile photonic structures.Here,we report an in-fiber photoelec-tric device by wrapping a few-layer graphene and bonding a pair of electrodes onto a tilted fiber Bragg grating(TFBG)for photoelectric and electric-induced thermo-optic conversions.The transmitted spectrum from this device consists of a dense comb of narrowband resonances that provides an observable window to sense the photocurrent and the electrical injection in the graphene layer.The device has a wavelength-sensitive photoresponse with responsivity up to 11.4 A/W,allowing the spectrum analysis by real-time monitoring of photocurrent evolution.Based on the thermal-optic effect of electrical injection,the graphene layer is energized to produce a global red-shift of the transmission spectrum of the TF-BG,with a high sensitivity approaching 2.167×10^(4)nm/A^(2).The in-fiber photoelectric device,therefore as a powerful tool,could be widely available as off-the-shelf product for photodetection,spectrometer and current sensor.

Mn^(4+) activated phosphors in photoelectric and energy conversion devices

Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode(W-LED),plant cultivation LED,and temperature thermometer.Up to now,Mn^(4+)has been widely introduced into the lattices of various inorganic hosts for brightly redemitting phosphors.However,how to correlate the structure-activity relationship between host framework,luminescence property,and photoelectric device is urgently demanded.In this review,we thoroughly summarize the recent advances of Mn^(4+)doped phosphors.Meanwhile,several strategies like co-doping and defect passivation for improving Mn^(4+)emission are also discussed.Most importantly,the relationship between the protocols for tailoring the structures of Mn^(4+)doped phosphors,increased luminescence performance,and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated.Finally,the challenges and perspectives of Mn^(4+)doped phosphors for practical applications are anticipated.We cordially anticipate that this review can deliver a deep comprehension of not only Mn^(4+)luminescence mechanism but also the crystal structure tailoring strategy of phosphors,so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.

Thickness effect on solar-blind photoelectric properties of ultrathinβ-Ga_(2)O_(3)films prepared by atomic layer deposition

Theβ-Ga_(2)O_(3)films with different thicknesses are prepared by an atomic layer deposition system.The influence of film thickness on the crystal quality is obvious,indicating that the thicker films perform better crystal quality,which is verified from x-ray diffraction(XRD)and scanning electron microscope(SEM)results.The Ga_(2)O_(3)-based solar blind photodetectors with different thicknesses are fabricated and studied.The experimental results show that the responsivity of the photodetectors increases exponentially with the increase of the film thickness.The photodetectors with inter-fingered structure based on 900 growth cyclesβ-Ga_(2)O_(3)active layers(corresponding film thickness of 58 nm)exhibit the best performances including a low dark current of 134 fA,photo-to-dark current ratio of 1.5×10^(7),photoresponsivity of 1.56 A/W,detectivity of 2.77×10^(14)Jones,and external quantum efficiency of 764.49%at a bias voltage of 10 V under 254-nm DUV illumination.The photoresponse rejection ratio(R_(254)/R_(365))is up to 1.86×10^(5).In addition,we find that the photoelectric characteristics also depend on the finger spacing of the MSM structure.As the finger spacing decreases from 50μm to10μW,the photoresponsivity,detectivity,and external quantum efficiency increase significantly.

Effect of thickness of antimony selenide film on its photoelectric properties and microstructure

Antimony selenide(Sb2Se3) films are widely used in phase change memory and solar cells due to their stable switching effect and excellent photovoltaic properties. These properties of the films are affected by the film thickness. A method combining the advantages of Levenberg–Marquardt method and spectral fitting method(LM–SFM) is presented to study the dependence of refractive index(RI), absorption coefficient, optical band gap, Wemple–Di Domenico parameters, dielectric constant and optical electronegativity of the Sb2Se3films on their thickness. The results show that the RI and absorption coefficient of the Sb2Se3films increase with the increase of film thickness, while the optical band gap decreases with the increase of film thickness. Finally, the reasons why the optical and electrical properties of the film change with its thickness are explained by x-ray diffractometer(XRD), energy dispersive x-ray spectrometer(EDS), Mott–Davis state density model and Raman microstructure analysis.

On the Physical Process and Essence of the Photoelectric Effect

A hundred years ago, Planck and Einstein and others created quantum theories or quantum mechanics while they explained the photoelectric effect. Planck and Einstein empirically obtained a statistical relationship between the energy of light quantum and the frequency of light but have not studied the physical process and essence of the photoelectric effect, so some photoelectric phenomena are difficult to be explained by existing quantum mechanics currently. In this paper, a dynamical process of orthogonal interaction between a photon and an electron to form a new state of matter in photoelectric effect experiments is studied so finding that the Planck constant is a product value of the mass, length, and velocity of a high-energy particle. The dynamics of the orthogonal collision of matter (particles) can not only give the physical process and essence of the photoelectric effect, but also have great significance for the further development of quantum mechanics. It can physically explain phenomena such as wave-particle duality and quantum entanglement in the motion of high-energy particles. Its prospects can be widely used in cosmic physics, macro physics, and micro physics.

Study on the Reparative Effect of Peptide RW3 Binding Active Collagen after Photoelectric Skincare

The photoelectric microneedle treatment instrument is also widely used due to the rapid development of medical cosmetology in China in recent years. It also causes a lot of skin discomfort after the consumers carry out such projects. This study, which combines small molecule active peptides (RW3) and active collagens and imitates the photoelectric treatment through in vitro and in vivo experiment, finds that small molecule active peptides (RW3) and active collagens have different improvement effects on cell proliferation, migration, anti-UV damage, inhibition of ear swelling and inflammation in mice, repair of UV damage and skin damage caused by microneedles. .

Facile Preparation, Characterization of Flexible Organic Solar Cells Using P3HT-MWCNTS Composite Photoactive Layer

Multiwalled carbon nanotubes (MWCNTs) mixed in poly(3-hexylthiophene) (P3HT) were used as a photoactive layer for organic solar cells (OSC). The flexible OSCs of a structure of PET/rGO-P3HT/P3CT/PCBM/LiF-Al were prepared by spincoating. The UV-Vis absorption spectra of the photoactive films and current-voltage characteristics of the OSCs showed the advantage of the composite devices above the pristine-polymeric ones. Under illumination of light with a 100 mW/cm2-powerdensity, the photoelectrical conversion efficiency (PCE) of the OSCs with 3.0 wt% MWNCTs embedded in the photoactive layer possess a value as large as 2.35%. The obtained results suggest further useful applications of the flexible large-area solar cells.

Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement.It has an important application in the field of high temperature measurement,and its performance directly affects the accuracy of temperature measurement.By improving the design of the detection optical system of the photoelectric pyrometer,the imaging performance of the photoelectric pyrometer can be improved effectively,and the temperature measurement accuracy can be improved.In this paper,the temperature measurement principle of photoelectric pyrometer,the wo rking principle of the detection optical system and the composition of the system are introduced.The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed.The optical pyrometer detection optical system is simulated by ZEMAX software,based on the analysis results,the Modulation Transfer Function(MTF)and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system.The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.

Memristive Artificial Synapses for Neuromorphic Computing

Neuromorphic computing simulates the operation of biological brain function for information processing and can potentially solve the bottleneck of the von Neumann architecture.This computing is realized based on memristive hardware neural networks in which synaptic devices that mimic biological synapses of the brain are the primary units.Mimicking synaptic functions with these devices is critical in neuromorphic systems.In the last decade,electrical and optical signals have been incorporated into the synaptic devices and promoted the simulation of various synaptic functions.In this review,these devices are discussed by categorizing them into electrically stimulated,optically stimulated,and photoelectric synergetic synaptic devices based on stimulation of electrical and optical signals.The working mechanisms of the devices are analyzed in detail.This is followed by a discussion of the progress in mimicking synaptic functions.In addition,existing application scenarios of various synaptic devices are outlined.Furthermore,the performances and future development of the synaptic devices that could be significant for building efficient neuromorphic systems are prospected.

Research progress in terahertz quantum-cascade lasers and quantum-well photodetectors

As semiconductor devices,the terahertz quantum-cascade laser is a coherent source based on intersubband transitions of unipolar carriers while the terahertz quantum-well photodetector is a kind of detector which matches the laser frequency.They are solid-state,electrically operated,and can be easily integrated with other components.This paper reviews the state of the art for the design,working performance,and future directions of the two devices.Their applications in photoelectric characterization and imaging are also discussed.

Preparation of polypyrrole/polyvinylalcohol(PPy/PVA)composite foam electrode material

Polypyrrole/polyvinylalcohol（PPy/PVA） foam was prepared by direct foam polymerization in water and then it was coated on the indium-tin oxide transparent conductive glass（ITO） to form conventional three-electrode cell.FTIR and UV-vis spectra were adopted to characterize the molecular structure and the absorption spectra of foam material,respectively.The porous structure of PPy/PVA foams and their photoelectric conversion behaviors were studied.The dimension of the pores is bigger than 100μm in diameter.Compared with the smooth film,the V_（oc） and I_（sc） of the foam film enhanced by 1.58-fold and 5.59-fold,respectively.

Damage Detection of Composite Material Intelligent Structure with a New Photoelectric System

A kind of photoelectric system that is suitable to measuring and to testing the damage of the composite material intelligent structure was presented. It can measure the degree of damage of the composite intelligent structure and it also can tell us the damage position in the structure. This system consists of two parts ： software and hardware. Experiments of the damage detection and the analysis of the composite material structure with the photoelectric system were performed, and a series of damage detection experiments was conducted. The results prove that the performance of the system is well and the effects of the measure and test are evident. Through all the experiments, the damage detection technology and test system are approved to be real-time, effective and reliable in the damage detection of the composite intelligent structure.

Photoelectric detection technology of laser seeker signals

The measurement of the rolling angle of the projectile is one of the key technologies for the terminal correction projectile.To improve the resolution accuracy of the rolling angle in the laser seeker weapon system, the imaging model of the detector, calculation model of the position and the signal-to-noise ratio(SNR) model of the circuit are built to derive both the correlation between the resolution error of the rolling angle and the spot position, and the relation between the position resolution error and the SNR. Then the influence of each parameter on the SNR is analyzed at large,and the parameters of the circuit are determined. Meanwhile, the SNR and noise voltage of the circuit are calculated according to the SNR model and the decay model of the laser energy. Finally,the actual photoelectric detection circuit is built, whose SNR is measured to be up to 53 d B. It can fully meet the requirement of0.5° for the resolution error of the rolling angle, thereby realizing the analysis of critical technology for photoelectric detection of laser seeker signals.

Performance of a plastic scintillation fiber dosimeter based on different photoelectric devices

The photoelectric device of a scintillation dosimeter converts photons produced by radiation into an electrical signal.Its features directly determine the overall performance of the dosimeter.For a plastic scintillation fiber dosimeter(PSFD)with a current readout mode,systematic studies of the stability and light-dose response were performed for the photomultiplier tube(PMT),silicon photomultiplier(SiPM),avalanche photodiode(APD),and photodiode(PD).The temperature stability,long-term stability,repeatability,signal-to-noise ratio(SNR),and current dose response of the PSFD with the abovementioned photoelectric devices were studied using a pulsed LED light source and the Small Animal Radiation Therapy platform.An exponential relationship between the dark/ne current and temperature was obtained for all the devices.I is shown that the APD is the most sensitive device to temperature,with a current dependence on temperature reaching 6.5%C^(-1)at room temperature,whereas for the other devices this dependence is always<0:6%C^(-1).In terms of long-term stability,the net current of PD can change by up to 4%when working continuously for 8 h and 2%when working intermittently for 32 h,whereas for the other devices,the changes are all<1%.For the dose response,the PMT and SiPM exhibit excellent linear responses and SNRs within the range of 0.1-60 Gy/min For the PSFD with a current readout mode,the performance of the PMT and SiPM is concluded to be better than that of the other devices in the study.In particular,the SiPM,which has a compact size,low bias voltage,and antimagnetic interference,has great advantages for further applications.

Experimental Investigation of Solar Panel Cooling by a Novel Micro Heat Pipe Array

A novel micro heat pipe array was used in solar panel cooling. Both of air-cooling and water-cooling conditions under nature convection condition were investigated in this paper. Compared with the ordinary solar panel, the maximum difference of the photoelectric conversion efficiency is 2.6%, the temperature reduces maximally by 4.7℃, the output power increases maximally by 8.4% for the solar panel with heat pipe using air-cooling, when the daily radiation value is 26.3 MJ. Compared with the solar panel with heat pipe using air-cooling, the maximum difference of the photoelectric conversion efficiency is 3%, the temperature reduces maximally by 8℃, the output power increases maximally by 13.9% for the solar panel with heat pipe using water-cooling, when the daily radiation value is 21.9 MJ.

Performance Analysis of Compound Parabolic Concentration Photothermal and Photoelectricity Device for Soil Heating in Facility Agriculture

It is difficult for solanum crops to grow continuously during winter in severe cold regions. Thus, a soil heating system for facility agriculture based on solar concentration technology was proposed, and a novel compound parabolic concentration photothermal and photoelectricity device(CTPV) equipped in the system was designed to address this problem. In accordance with the structure of the device, LightTools optical software was selected to analyze the variation trend of the light escape rate of the device with the diff erent incident angles. On the basis of the calculation results, an experimental test system was used to investigate the relationship of the air temperature of the inlet and the outlet, total output power of the solar cells, and photothermal and photoelectricity efficiency of the device with the operation time during a sunny day. Research results reveal that the light escape rate of the device is 5.36% at an incidence angle of 12°. At a velocity of 1.5 m/s, the maximum air temperature of the outlet can reach 55.6 ℃, and the total output power of the solar cells is 474.4 W. The variation of the total power of the solar cells is consistent with the simulation results. The maximum instantaneous heat collection and the maximum photothermal and photoelectricity efficiency of the device are 306 W and 60.4%, respectively, and the average efficiency is 44.9%. This study can serve as a reference for compound parabolic concentration technology applied for soil heating in facility agricultural soil heating systems.