Three-dimensional simulation of a Ka-band relativistic Cherenkov source with metal photonic-band-gap structures

This paper presents a three-dimensional particle-in-cell （PIC） simulation of a Ka-band relativistic Cherenkov source with a slow wave structure （SWS） consisting of metal photonic band gap （PBG） structures. In the simulation, a perfect match layer boundary is employed to absorb passing band modes supported by the PBG lattice with an artificial metal boundary. The simulated axial field distributions in the cross section and surface of the SWS demonstrate that the device operates in the vicinity of the π point of a TM01-1ike mode. The Fourier transformation spectra of the axial fields as functions of time and space show that only a single frequency appears at 36.27 GHz, which is in good agreement with that of the intersection of the dispersion curve with the slow space charge wave generated on the beam. The simulation results demonstrate that the SWS has good mode selectivity.

A Study of Properties of the Photonic Band Gap of Unmagnetized Plasma Photonic Crystal

In this study, the propagation of electromagnetic waves in one-dimensional plasma photonic crystals （PPCs）, namely, superlattice structures consisting alternately of a homogeneous unmagnetized plasma and dielectric material, is simulated numerically using the finite-difference time-domain （FDTD） algorithm. A perfectly matched layer （PML） absorbing technique is used in this simulation. The reflection and transmission coefficients of electromagnetic （EM） waves through PPCs are calculated. The characteristics of the photonic band gap （PBG） are discussed in terms of plasma density, dielectric constant ratios, number of periods, and introduced layer defect. These may provide some useful information for designing plasma photonic crystal devices.

Theoretical study on the photonic band gap in one-dimensional photonic crystals with graded multilayer structure

We theoretically investigate the photonic band gap in one-dimensional photonic crystals with a graded multilayer structure. The proposed structure constitutes an alternating composite layer （metallic nanoparticles embedded in TiO2 film） and an air layer. Regarding the multilayer as a series of capacitance, effective optical properties are derived. The dispersion relation is obtained with the solution of the transfer matrix equation. With a graded structure in the composite layer, numerical results show that the position and width of the photonic band gap can be effectively modulated by varying the number of the graded composite layers, the volume fraction of nanoparticles and the external stimuli.

Main Factors for Affecting Photonic Bandgap of Photonic Crystals

The factors affecting one dimensional （1D） and two dimensional （2D） photonic crystals （PhCs） are systemically analyzed in this paper by numerical simulation. Transfer matrix method （TMM） is employed for 1D PCs, both finite difference time domain method （FDTD） and plane wave expansion method （PWE） are employed for 2D PCs. The result shows that the photonic bandgaps （PBG） are directly affected by crystal type, crystal lattice constant, modulation of refractive index and periodicity, and it is should be useful for design of different type photonic crystals with the required PBG and functional devices. Finally, as an example, a near-IR 1D PCs narrow filter was designed.

Excitation of defect modes from the extended photonic band-gap structures of 1D photonic lattices

This paper stuides numerically the model equation in a one dimensional defective photonic lattice by modifying the potential function to a periodic function. It is found that defect modes （DMs） can be regarded as Bloch modes which are excited from the extended photonie band-gap structure at Bloch wave-numbers with kx = 0. The DMs for both positive and negative defects are considered in this method.

Band gaps structure and semi-Dirac point of two-dimensional function photonic crystals

Two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , are proposed and studied numerically. The band gaps structures of the photonic crystals for TE and TM waves are different from the two-dimensional conventional photonic crystals. Some absolute band gaps and semiDirac points are found. When the medium column radius and the function form of the dielectric constant are modulated, the numbers, width, and position of band gaps are changed, and the semi-Dirac point can either occur or disappear. Therefore,the special band gaps structures and semi-Dirac points can be achieved through the modulation on the two-dimensional function photonic crystals. The results will provide a new design method of optical devices based on the two-dimensional function photonic crystals.

Dispersion characteristics of a slow wave structure with a modified photonic band gap

This paper studies the dispersion characteristics of a modified photonic band-gap slow-wave structure with an open boundary by simulation and experiment. A mode launcher with a wheel radiator and a coupling probe is presented to excite a pure TM01-like mode. The cold test and simulation results show that the TM01-like mode is effectively excited and no parasitic modes appear. The dispersion characteristics obtained from the cold test are in good agreement with the calculated results.

Tunable topological edge state in plasma photonic crystals

In this study, we found a kind of edge state located at the interface between plasma photonic crystals(PPCs) and traditional photonic crystals, which depends on the property of the photonic band gap rather than the surface defect. Simulation and theoretical analysis show that by adjusting the plasma density, we can change the topological characteristics of the photonic band gap of PPCs. This makes it different from the photonic band gap of traditional PCs, and thus excites or closes the topological edge states. We further discussed the influence of plasma parameters on edge state characteristics, and the results showed that as the plasma density increased, the first photonic band gap(PBG) of the PPCs closed and then reopened, resulting in band inversion and a change in the PBG properties of the PPCs. We can control the generation of edge states through plasma and adjust the frequency and strength of the edge states. After the appearance of edge states, as the plasma density further increases, the first PBG of the PPCs will shift towards high frequencies and deepen. The frequency of edge states will shift towards higher frequencies, and their strength will also increase. We increased the first PBG depth of the PPCs by increasing the number of arrays and found that when the number of the PPCs arrays increased, only the intensity of the edge states would increase while the frequency remained unchanged. Therefore, flexible adjustment of edge state frequency and intensity can be achieved through plasma density and array quantity parameters. Our study demonstrates the properties of topological edge states in plasma photonic crystals, which we believe can provide some guidance for applications based on edge states.

Theoretical investigation of band-gap and mode characteristics of anti-resonance guiding photonic crystal fibres

With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in anti- resonance guiding photonic crystal fibres （ARGPCFs） are sufficiently analysed. An ARGPCF operating in the near- infrared wavelength is shown. The influences of the high index cylinders, glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated. The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials, and the resonance and the anti-resonance characteristics r：~n h~ w~｜] r^r~dlrtpd

Comparison of entanglement trapping among different photonic band gap models

We investigate the roles of different qubit-environment decoherence models on the entanglement trapping of two qubits. By considering three environmental models （the single photonic band gap model, the common photonic band gap model, and the two independent photonic band gaps model）, we note that the final values of entanglement trapping are determined by these different models. We also give the conditions of obtaining the larger entanglement trapping by comparing two-qubit entanglement dynamics in different decoherence models. Moreover, the comparison of entanglement trapping between two Bell-like states in the same decoherence model are also carried out.

Existing conditions of full bandgaps and absolute negative refraction in metallic-dielectric photonic crystal

This paper has theoretically studied the characteristic frequencies of band structures in two-dimensional metallic- dielectric photonic crystals. It is demonstrated that a large filling fraction benefits the existence of absolute photonic band gap, while a smaller filling fraction benefits an absolute negative refraction band. In addition, it also finds that the relation between the cut-off frequency of E-polarized wave and the filling fraction exceeding 10% is content with a linear increasing function, whose coefficients are exponential to the normalized lattice constant. These investigations have significant implications for tuning the operational frequencies to desired applications and manufacturing photonic crystals.

Comment on “Band gaps structure and semi-Dirac point of two-dimensional function photonic crystals” by Si-Qi Zhang et al.

Recently, Zhang et al. （Chin. Phys. B 26 024208 （2017）） investigated the band gap structures and semi-Dirac point of two-dimensional function photonic crystals, and the equations for the plane wave expansion method were induced to obtain the band structures. That report shows the band diagrams with the effects of function coefficient k and medium column ra under TE and TM waves. The proposed results look correct at first glance, but the authors made some mistakes in their report. Thus, the calculated results in their paper are incorrect. According to our calculations, the errors in their report are corrected, and the correct band structures also are presented in this paper.

Investigation of Photonic Band Gap in Si-Based One-Dimensional Photonic Crystal

A one-dimensional silicon based photonic crystal with nonlinear defect layers is examined. The linear and nonlinear optical properties are analyzed. The transmission spectrum was obtained by applying the optical transfer matrix formalism to the photonic crystal. The various transmittance peaks obtained with the defect layers are investigated. The nature of the transmittance peak is analyzed with the number of defect layers.

The interaction of in-band and in-gap lattice soliton trains in optically induced two-dimensional photonic lattices

We demonstrate the coherent interactions of lattice soliton trains, including in-band solitons （IBSs） and gap soliton trains （GSTs）, in optically induced two-dimensional photonic lattices with self-defocusing nonlinearity. It is revealed that the π-staggered phase structures of the lattice soliton trains will lead to anomalous interactions. Solely by changing their initial separations, the transition between attractive and repulsive interaction forces or reversion of the energy transfer can be obtained. The ‘negative refraction＇ effect of the soliton trains on the interaction is also discussed. Moreover, two interacting IBSs can merge into one GST when attraction or energy transfer happens.

Investigation of the guided-mode characteristics of hollow-core photonic band-gap fibre with interstitial holes

This paper investigates the guided-mode characteristics of hollow-core photonic band-gap fibre （HC-PBGF） with interstitial holes fabricated by an improved twice stack-and-draw technique at visible wavelengths. Based on the simulation model with interstitial holes, the influence of glass interstitial apexes on photonic band-gaps is discussed. The existing forms of guided-mode in part band gaps are shown by using the full-vector plane-wave method. In the experiment, the observed transmission spectrum corresponds to the part band gaps obtained by simulation. The fundamental and second-order guided-modes with mixture of yellow and green light are observed through choosing appropriate fibre length and adjusting coupling device. The loss mechanism of guided-modes in HC-PBGF is also discussed.

Differences of Band Gap Characteristics of Square and Triangular Lattice Photonic Crystals in Terahertz Range

Band gap characteristics of the photonic crystals in terahertz range with square lattice and triangular lattice of GaAs cylinders are comparatively studied by means of plane wave method （PWM）. The influence of the radius on the band gap width is analyzed and the critical values where the band gap appears are put forward. The results show that the maximum band gap width of photonic crystal with triangular lattice of GaAs cylinders is much wider than that of photonic crystal with square lattice. The research provides a theoretic basis for the development of terahertz （THz） devices.

Photonic band structures of two-dimensional photonic crystals with deformed lattices

Using the plane-wave expansion method, we have calculated and analysed the changes of photonic band structures arising from two kinds of deformed lattices, including the stretching and shrinking of lattices. The square lattice with square air holes and the triangular lattice with circular air holes are both studied. Calculated results show that the change of lattice size in some special ranges can enlarge the band gap, which depends strongly on the filling factor of air holes in photonic crystals; and besides, the asymmetric band edges will appear with the broken symmetry of lattices.

One-dimensional structure made of periodic slabs of SiO2/InSb offering tunable wide band gap at terahertz frequency range

Optical features of a semiconductor–dielectric photonic crystal are studied theoretically. Alternating layers of micrometer sized SiO2/In Sb slabs are considered as building blocks of the proposed ideal crystal. By inserting additional layers and disrupting the regularity, two more defective crystals are also proposed. Photonic band structure of the ideal crystal and its dependence on the structural parameters are explored at the first step. Transmittance of the defective crystals and its changes with the thicknesses of the layers are studied. After extracting the optimum values for the thicknesses of the unit cells of the crystals, the optical response of the proposed structures at different temperatures and incident angles are investigated. Changes of the defect layers’ induced mode(s) are discussed by taking into consideration of the temperature dependence of the In Sb layer permittivity. The results clearly reflect the high potential of the proposed crystals to be used at high temperature terahertz technology as a promising alternative to their electronic counterparts.

Some New Band Characteristics in One-Dimensional Plasma Dielectric Photonic Crystals

Propagation of electromagnetic waves in one-dimensional plasma dielectric photonic crystals, the superlattice structure consisting of alternating plasma and dielectric materials, is studied theoretically for oblique incidence by using the transfer matrix method. Our results show that complete photonic band gaps for all polarizations can be obtained in one-dimensional plasma dielectric photonic crystals. These structures can exhibit a new type of band or gap, for the incidence other than the normal one, near frequencies where the electric permittivity of the plasma layer changes sign. This new band or gap arises, from the dispersive properties of the plasma layer, only for transverse magnetic polarized waves, and its width increases with the increase in incident angle. This differential behavior under polarization can be utilized in the design of an efficient polarization splitter. The existence of both photonic gaps and resonance transmission bands is demonstrated for experimentally realizable structures such as double electromagnetic barriers.

Analysis on Band Gaps of MCM-41 Type of Materials

The concept and analysis method of photonic crystals and band gaps are introduced into one-dimensional(1D) ordered mesoporous materials. MCM-41 type of materials are treated theoretically as photonic crystals. The formation of band gaps is exhibited and confirmed by a calculation of transfer matrix technique. PBG was found around 9-42 nm in soft X-ray region. The photonic band-gap was predicted to be dependent on incident direction, pore size and lattice constant. The mesoporous materials with different pore sizes and different lattice constants have different band-gap widths.