A Piecewise Linear Slope Compensation Circuit for DC-DC Converters

To prevent sub-harmonic oscillation and improve the stability and load capacity of the system,a piecewise linear slope compensation circuit is designed. Compared with the traditional design, this circuit provides a compensation signal whose slope varies from different duty cycles at - 40-85℃ ,and reduces the negative effect of slope compensation on the system＇s load capacity and transient response. A current mode PWM Boost DC-DC converter employing this slope compensation circuit is implemented in a UMC 0.6μm-BCD process. The results indicate that the circuit works well and effectively,and the load capacity is increased by 20%. The chip area of the piecewise linear slope compensation circuit is 0.01mm^2 ,which consumes only 8μA quiescent current,and the efficiency ranges up to 93%.

CALCULATING ACCURATE PERIODIC MOTIONS OF HARMONICALLY FORCED PIECEWISE LINEAR OSCILLATORS

This paper presents an efficient numerical scheme for calculating the periodic motion of a harmonically forced piecewise linear oscillator very accurately. The scheme is based on the shooting technique with the traditional numerical Poincare mapping and its Jacobian replaced by the piecewise analytic ones. Thus, the scheme gets rid of the requirement of the current schemes for an assumed order of the oscillator trajectory passing through different linear regions. The numerical examples in the paper demonstrate that the new scheme, compared with the current schemes, enables one to cope with more complicated dynamics of harmonically forced piecewise linear oscillators.

A comparison of piecewise cubic Hermite interpolating polynomials,cubic splines and piecewise linear functions for the approximation of projectile aerodynamics

Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and representative numerical model of projectile flight requires a relatively good approximation of the aerodynamics.The aerodynamic coefficients of the projectile model should be described as a series of piecewise polynomial functions of the Mach number that ideally meet the following conditions:they are continuous,differentiable at least once,and have a relatively low degree.The paper provides the steps needed to generate such piecewise polynomial functions using readily available tools,and then compares Piecewise Cubic Hermite Interpolating Polynomial(PCHIP),cubic splines,and piecewise linear functions,and their variant,as potential curve fitting methods to approximate the aerodynamics of a generic small arms projectile.A key contribution of the paper is the application of PCHIP to the approximation of projectile aerodynamics,and its evaluation against a set of criteria.Finally,the paper provides a baseline assessment of the impact of the polynomial functions on flight trajectory predictions obtained with 6-degree-of-freedom simulations of a generic projectile.

Discontinuous bifurcation and coexistence of attractors in a piecewise linear map with a gap

Coexistence of attractors with striking characteristics is observed in this work, where a stable period-5 attractor coexists successively with chaotic band-ll, period-6, chaotic band-12 and band-6 attractors. They are induced by dif- ferent mechanisms due to the interaction between the discontinuity and the non-invertibility. A characteristic boundary collision bifurcation, is observed. The critical conditions are obtained both analytically and numerically.

Piecewise linear recursive convolution FDTD method for magnetized plasmas

The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method greatly improves accuracy over the original recursive convolution （RC） FDTD approach but retains its speed and efficiency advantages. A PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time is presented, enabled the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations the reflection and transmission coefficients through a magnetized plasma layer. The results show that the PLRC-FDTD method has significantly improved the accuracy over the original RC method.

Determination of pKa values of alendronate sodium in aqueous solution by piecewise linear regression based on acid-base potentiometric titration

As a mono-sodium salt form of alendronic acid,alendronate sodium presents multi-level ionization for the dissociation of its four hydroxyl groups.The dissociation constants of alendronate sodium were determined in this work by studying the piecewise linear relationship between volume of titrant and p H value based on acidbase potentiometric titration reaction.The distribution curves of alendronate sodium were drawn according to the determined p Ka values.There were 4 dissociation constants(pKa_1=2.43,pKa_2=7.55,pKa_3=10.80,pKa_4=11.99,respectively) of alendronate sodium,and 12 existing forms,of which 4 could be ignored,existing in different p H environments.

Longwall mining automation horizon control:Coal seam gradient identification using piecewise linear fitting

Horizon control, maintaining the alignment of the shearer's exploitation gradient with the coal seam gradient, is a key technique in longwall mining automation. To identify the coal seam gradient, a geological model of the coal seam was constructed using in-seam seismic surveying technology. By synthesizing the control resolution of the range arm and the geometric characteristics of the coal seam, a gradient identification method based on piecewise linear representation(PLR) is proposed. To achieve the maximum exploitation rate within the shearer's capacity, the control resolution of the range arm is selected as the threshold parameter of PLR. The control resolution significantly influenced the number of line segments and the fitting error. With the decrease of the control resolution from 0.01 to 0.02 m, the number of line segments decreased from 65 to 15, which was beneficial to horizon control. However, the average fitting error increased from 0.055 to 0.14 m, which would induce a decrease in the exploitation rate. To avoid significant deviation between the cutting range and the coal seam, the control resolution of the range arm must be lower than 0.02 m. In a field test, the automated horizon control of the longwall face was realized by coal seam gradient identification.

MULTIDIMENSIONAL MULTI-KNOTS PIECEWISE LINEAR SPECTRAL SEQUENCES

Motivated by representing multidimensional periodic nonlinear and non-stationary signals （functions）, we study a class of orthonormal exponential basis for L2（Id） with I ：= [0, 1）, whose exponential parts are piecewise linear spectral sequences with p-knots. It is widely applied in time-frequency analysis.

A Piecewise Linear Isotropic-Kinematic Hardening Model with Semi-Implicit Rules for Cyclic Loading and Its Parameter Identification

A simple constitutive model,called semi-implicit model,for cyclic loading is proposed for steel materials used for structures such as building frames in civil engineering.The constitutive model is implemented in the E-Simulator,which is a software package for large-scale seismic response analysis.The constitutive relation is defined in an algorithmic manner based on the piecewise linear combined isotropic-kinematic hardening.Different rules are used for the first and subsequent loading states to incorporate characteristics such as yield plateau and Bauschinger effect of rolled mild steel materials.An optimization method is also presented for parameter identification from the results of cyclic and monotonic loading tests.Therefore,the proposed model is readily applicable to practical elastoplastic analysis of building frames.Accuracy of the model is demonstrated in an example of a cantilever subjected to various types of cyclic loading.

Breakage Distribution Estimation of Bauxite Based on Piecewise Linearized Breakage Rate

Laboratory tests were carried out to study the breakage kinetics of diasporic bauxite and determine its breakage distribution function. Non-first order breakage with different deceleration rates for different size intervals is found, which is most probably caused by the heterogeneity of the ore. Piecewise linearization method is proposed to describe the non-first order breakage according to its characteristics. In the method, grinding time is divided into several intervals and breakage is assumed to be first order in each interval. So, the breakage rates are calculated by taking the product of the last interval as feed and then established as a function of particle size and grinding time. Based on the predetermined breakage rate function, the breakage distribution of the ore is back-calculated from the experimental data using the population balance model (PBM). Finally, the obtained breakage parameters are validated and the simulated data are in good agreement with the experimental data. The obtained breakage distribution and the method for breakage rate description are both significant for modeling the full scale ball milling process of bauxite.

H_∞ controller synthesis of piecewise discrete time linear systems

This paper presents an H∞ controller design method for piecewise discrete time linear systems based on a piecewise quadratic Lyapunov function. It is shown that the resulting closed loop system is globally stable with guaranteed H∞ performance and the controller can be obtained by solving a set of bilinear matrix inequalities. It has been shown that piecewise quadratic Lyapunov functions are less conservative than the global quadratic Lyapunov functions. A simulation example is also given to illustrate the advantage of the proposed approach.

Noise destroys the coexistence of periodic orbits of a piecewise linear map

The effects of Gaussian white noise and Gaussian colored noise on the periodic orbits of period-5（P-5） and period-6（P-6） in their coexisting domain of a piecewise linear map are investigated numerically.The probability densities of some orbits are calculated.When the noise intensity is D = 0.0001,only the orbits of P-5 exist,and the coexisting phenomenon is destroyed.On the other hand,the self-correlation time τ of the colored noise also affects the coexisting phenomenon.When τc〈τ〈τc,only the orbits of P-5 appear,and the stability of the orbits of P-5 is enhanced.However,when τ〉τc（τc and τc are critical values）,only the orbits of P-6 exist,and the stability of the P-6 orbits is enhanced greatly.When τ〈τc,the orbits of P-5 and P-6 coexist,but the stability of the P-5 orbits is enhanced and that of P-6 is weakened with τ increasing.

A new chaotic Hopfield network with piecewise linear activation function

This paper presents a new chaotic Hopfield network with a piecewise linear activation function. The dynamic of the network is studied by virtue of the bifurcation diagram, Lyapunov exponents spectrum and power spectrum. Numerical simulations show that the network displays chaotic behaviours for some well selected parameters.

A Revised Piecewise Linear Recursive Convolution FDTD Method for Magnetized Plasmas

The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） but retains their advantages in speed and efficiency. This paper describes a revised piecewise linear recursive convolution PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time, enabling the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations of the reflection and transmission coefficients through a magnetized plasma layer. The results show that the revised PLRC-FDTD method has improved the accuracy over the original RC FDTD method and JEC FDTD method.

Synchronization and Stability of a Nonlinear Vibrating Mechanical System Characterized by Asymmetrical Piecewise Linearity

In previous studies about the synchronization of vibrators,the restoring forces of springs are mainly treated as linear directly,whereas the nonlinear features are rarely considered in vibrating systems.To make up this drawback,a dynamical model of a nonlinear vibrating mechanical system with double rigid frames(RFs),driven by two vibrators,is proposed to explore the synchronization and stability of the system.In this paper,the nonlinearity is reflected in nonlinear restoring forces of springs characterized by asymmetrical piecewise linear,where the nonlinear stiffness of springs is linearized equivalently using the asymptotic method.Based on the average method and Hamilton’s principle,the theory conditions to achieve synchronization and stability of two vibrators are deduced.After the theory analyses,some numerical qualitative analyses are given to reveal the coupling dynamical characteristics of the system and the relative motion properties between two RFs.Besides,some experiments are carried out to examine the validity of the theoretical results and the correctness of the numerical analyses results.Based on the comparisons of the theory,numeric and experiment,the ideal working regions of the system are suggested.Based on the present work,some new types of vibrating equipment,such as vibrating discharging centrifugal dehydrators/conveyers/screens,can be designed.

An Approach to Formulation of FNLP with Complex Piecewise Linear Membership Functions

Traditionally, extra binary variables are demanded to formulate a fuzzy nonlinear programming(FNLP) problem with piecewise linear membership functions(PLMFs). However, this kind of methodology usually suffers increasing computational burden associated with formulation and solution, particularly in the face of complex PLMFs. Motivated by these challenges, this contribution introduces a novel approach free of additional binary variables to formulate FNLP with complex PLMFs, leading to superior performance in reducing computational complexity as well as simplifying formulation. A depth discussion about the approach is conducted in this paper, along with a numerical case study to demonstrate its potential benefits.

SOME GENERAL THEOREMS AND GENERALIZED AND PIECEWISE GENERALIZED VARIATIONAL PRINCIPLES FOR LINEAR ELASTODYNAMICS

From the concept of four-dimensional space and under the four kinds of time limit conditions, some general theorems for elastodynamics are developed, such as the principle of possible work action, the virtual displacement principle, the virtual stress-momentum principle, the reciprocal theorems and the related theorems of time terminal conditions derived from it. The variational principles of potential energy action and complementary energy action, the H-W principles, the H-R principles and the constitutive variational principles for elastodynamics are obtained. Hamilton's principle, Toupin's work and the formulations of Ref. [5], [17]-[24] may be regarded as some special cases of the general principles given in the paper. By considering three cases: piecewise space-time domain, piecewise space domain, piecewise time domain, the piecewise variational principles including the potential, the complementary and the mixed energy action fashions are given. Finally, the general formulation of piecewise variational principles is derived. If the time dimension is not considered, the formulations obtained in the paper will become the corresponding ones for elastostatics.

Output feedback controller design for uncertain piecewise linear systems

This paper proposes output feedback controller design methods for uncertain piecewise linear systems based on piecewise quadratic Lyapunov function. The α-stability of closed-loop systems is also considered. It is shown that the output feedback controller design procedure of uncertain piecewise linear systems with α-stability constraint can be cast as solving a set of bilinear matrix inequalities （BMIs）. The BMIs problem in this paper can be solved iteratively as a set of two convex optimization problems involving linear matrix inequalities （LMIs） which can be solved numerically efficiently. A numerical example shows the effectiveness of the proposed methods.

The Best Piecewise Linearization of Nonlinear Functions

In this paper, we propose a method for finding the best piecewise linearization of nonlinear functions. For this aim, we try to obtain the best approximation of a nonlinear function as a piecewise linear function. Our method is based on an optimization problem. The optimal solution of this optimization problem is the best piecewise linear approximation of nonlinear function. Finally, we examine our method to some examples.