A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy ...A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy from the asphalt pavement in a large scale. The open circuit voltage of the harvester was obtained by the piezoelectric constant d<sub>33</sub> of the piezoelectric ceramic. The harvester is different from the cymbal harvester which works by the piezoelectric constant d<sub>31</sub>. The finite element model of the single harvester was constructed. The open circuit voltage increased with increase of the outer load. The finite element model of the single harvester buried in the asphalt pavement was built. The open circuit voltage, the deformation difference percent and the stress of the ceramic of the harvester were obtained with different buried depth. The open circuit voltage decreased when the buried depth was increased. The proper buried depth of the harvester should be selected as 30 - 50 mm. The effects of structure parameters on the open circuit voltage were gotten. The output voltage about 64.442 V could be obtained from a single harvester buried under 40 mm pavement at the vehicle load of 0.7 MPa. 0.047 mJ electric energy could be gotten in the harvester. The output power was about 0.705 mW at 15 Hz vehicle load frequency.展开更多
This paper presents the results of the performance of piezoelectric cantilever beams in relation to their size.The total produced power represents the main indicator of performance of a piezoelectric harvesting system...This paper presents the results of the performance of piezoelectric cantilever beams in relation to their size.The total produced power represents the main indicator of performance of a piezoelectric harvesting system while the area of the beams stays constant.Lightweight design is an important aspect in any industry,mainly in the aerospace.In this study,the effects of non-uniformity on the efficiency and power output are studied.Finite element method(FEM)with the application of superconvergent element(SCE)is adopted here to solve the equations.It is observed that the trapezoidal geometry(converging beam)provides a higher output power while the efficiency decreases.Moreover,in order to prove that the power enhancement is achievable while the amount of piezoelectric material consumed is constant the new configuration is proposed.In the configuration,an array of uniform beams connected in series is used instead of one single rectangular beam.The proposed setting generates an output power of 1.817mWat a resonant frequency of 284.6 Hz when excited by an input acceleration of 1 g.The only challenge is the fundamental frequency difference which ismet with the application of proof mass and thinner substrate and piezoelectric layers.展开更多
We demonstrate a piezoelectric vibration energy harvester with the ZnO piezoelectric film and an improved synchronous electric charge extraction energy harvesting circuit on the basis of the beam-type mechanical struc...We demonstrate a piezoelectric vibration energy harvester with the ZnO piezoelectric film and an improved synchronous electric charge extraction energy harvesting circuit on the basis of the beam-type mechanical structure,especially investigate its output performance in vibration harvesting and ability to generate charges.By establishing the theoretical model for each of vibration and circuit,the numerical results of voltage and power output are obtained.By fabricating the prototype of this harvester,the quality of the sputtered film is explored.Theoretical and experimental analyses are conducted in open-circuit and closed-circuit conditions,where the open-circuit mode refers to the voltage output in relation to the ZnO film and external excitation,and the power output of the closed-circuit mode is relevant to resistance.Experimental findings show good agreement with the theoretical ones,in the output tendency.It is observed that the properties of ZnO film achieve regularly direct proportion to output performance under different excitations.Furthermore,a maximum experimental power output of 4.5 mW in a resistance range of 3 kΩ-8 kΩis achieved by using an improved synchronous electric charge extraction circuit.The result is not only more than three times the power output of classic circuit,but also can broaden the resistance to a large range of 5 kΩunder an identical maximum value of power output.In this study we demonstrate the fundamental mechanism of piezoelectric materials under multiple conditions and take an example to show the methods of fabricating and testing the ZnO film.Furthermore,it may contribute to a novel energy harvesting circuit with high output performance.展开更多
This study discloses the diode’s influences on the piezoelectric energy harvesting performance.The piezoelectric-based energy harvesting system plays an important role in scavenging environment vibration energy into ...This study discloses the diode’s influences on the piezoelectric energy harvesting performance.The piezoelectric-based energy harvesting system plays an important role in scavenging environment vibration energy into electrical energy,which can be utilized by low-power electronic devices.With respect to the interface circuit,a full-wave bridge circuit is usually needed to rectify the alternating current(AC)signal into a direct current(DC)signal.The full-wave bridge is composed of four diodes,whose characteristics may influence the harvested power significantly.Therefore,in this paper,the diodes’properties and influences on the energy harvesting performance are analyzed and presented via simulation and experimental studies.It is found the harvested energy has close relationship with the diode characteristics.For the high source impedance case,diode with low reverse leakage current is favorable.For the low source impedance case,diode with low forward voltage drop is favorable.The corresponding experimental study is carried out via a piezoelectric beam,which shows that the measured harvested power differences can almost be up to 800%for the same test structure.展开更多
The low power and narrow speed range remain bottlenecks that constrain the application of small-scale wind energy harvesting.This paper proposes a simple,lowcost,and reliable method to address these critical issues.A ...The low power and narrow speed range remain bottlenecks that constrain the application of small-scale wind energy harvesting.This paper proposes a simple,lowcost,and reliable method to address these critical issues.A galloping energy harvester with the cooperative mode of vibration and collision(GEH-VC)is presented.A pair of curved boundaries attached with functional materials are introduced,which not only improve the performance of the vibration energy harvesting system,but also convert more mechanical energy into electrical energy during collision.The beam deforms and the piezoelectric energy harvester(PEH)generates electricity during the flow-induced vibration.In addition,the beam contacts and separates from the boundaries,and the triboelectric nanogenerator(TENG)generates electricity during the collision.In order to reduce the influence of the boundaries on the aerodynamic performance and the feasibility of increasing the working area of the TENG,a vertical structure is designed.When the wind speed is high,the curved boundaries maintain a stable amplitude of the vibration system and increase the frequency of the vibration system,thereby avoiding damage to the piezoelectric sheet and improving the electromechanical conversion efficiency,and the TENG works with the PEH to generate electricity.Since the boundaries can protect the PEH at high wind speeds,its stiffness can be designed to be low to start working at low wind speeds.The electromechanical coupling dynamic model is established according to the GEH-VC operating principle and is verified experimentally.The results show that the GEH-VC has a wide range of operating wind speeds,and the average power can be increased by 180%compared with the traditional galloping PEH.The GEH-VC prototype is demonstrated to power a commercial temperature sensor.This study provides a novel perspective on the design of hybrid electromechanical conversion mechanisms,that is,to combine and collaborate based on their respective characteristics.展开更多
Converting ambient vibration energy into electrical energy by using piezoelectric energy harvester has attracted a lot of interest in the past few years.In this paper,a topology optimization based method is applied to...Converting ambient vibration energy into electrical energy by using piezoelectric energy harvester has attracted a lot of interest in the past few years.In this paper,a topology optimization based method is applied to simultaneously determine the optimal layout of the piezoelectric energy harvesting devices and the optimal position of the mass loading.The objective function is to maximize the energy harvesting performance over a range of vibration frequencies.Pseudo excitation method (PEM) is adopted to analyze structural stationary random responses,and sensitivity analysis is then performed by using the adjoint method.Numerical examples are presented to demonstrate the validity of the proposed approach.展开更多
In this letter, a piezoaeroelastic energy harvester based on an airfoil with double plunge degrees of freedom is proposed to additionally take advantage of the vibrational energy of the airfoil pitch motion. An analyt...In this letter, a piezoaeroelastic energy harvester based on an airfoil with double plunge degrees of freedom is proposed to additionally take advantage of the vibrational energy of the airfoil pitch motion. An analytical model of the proposed energy harvesting system is built and compared with an equivalent model using the well-explored pitch-plunge configuration. The dynamic response and average power output of the harvester are numerically studied as the flow velocity exceeds the cut-in speed (flutter speed). It is found that the harvester with double-plunge configuration generates 4%-10% more power with varying flow velocities while reducing 670 of the cut-in speed than its counterpart.展开更多
Wearable devices,interactive human-machine interface equipment,wireless sensors,and small-scale cleaning devices play crucial roles in biomedical implantation,disease treatment,health monitoring,environmental purifica...Wearable devices,interactive human-machine interface equipment,wireless sensors,and small-scale cleaning devices play crucial roles in biomedical implantation,disease treatment,health monitoring,environmental purification,etc.These devices require a sustainable energy source to work effectively.With the consideration of the global energy crisis and environmental pollution,researchers are exploring new,stable,and environmentally friendly methods to power these low-powered devices.Mechanical energy is one of the most abundant natural energy sources.Converting mechanical energy from the ambient environment or host structures into electrical energy via the direct piezoelectric effect is an efficient energy harvesting technique.This paper reviews the application of advanced piezoelectric materials,and small-scale self-powered and self-sensing piezoelectric devices at the cubic centimeter scale in energy harvesting and health monitoring of human,animal,machinery,roads,bridges,as well as the pollutant degradation of the environment.Some of these devices have the capability to not only harvest mechanical energy but also enable real-time monitoring and analysis of the electrical signals generated by the direct piezoelectric effect,facilitating prompt decision-making and appropriate responses.In addition,potential challenges and future prospects of small-scale self-powered and self-sensing piezoelectric devices are discussed.展开更多
In this paper,a PZT(lead zirconate titanate)-based absorber and energy harvester(PAEH)is used for passive control of friction-induced stick-slip vibration in a friction system.Its stability condition coupled with PAEH...In this paper,a PZT(lead zirconate titanate)-based absorber and energy harvester(PAEH)is used for passive control of friction-induced stick-slip vibration in a friction system.Its stability condition coupled with PAEH is analytically derived,whose efficiency is then demonstrated by numerical simulation.The results show that the structural parameters of the PAEH can significantly affect the system stability,which increases with the mass ratio between the PAEH and the primary system,but first increases and then decreases with the natural frequency ratio between the PAEH and the primary system.The impacts of the electric parameters of the PAEH on the system stability are found to be insignificant.In addition,the PAEH can effectively suppress the stick-slip limit cycle magnitude in a wide working parameter range;however,it does not function well for friction systems in all the working conditions.The stick-slip vibration amplitude can be increased in the case of a large loading(normal)force.Finally,an experiment on a tribo-dynamometer validates the findings of the theoretical study,in which the vibration reduction and energy harvesting performance of the PAEH is fully demonstrated.展开更多
This paper presents an experimental study of the broadband energy harvesting and dynamic responses of an L-shaped piezoelectric cantilever beam.Experimental results show that the L-shaped piezoelectric beam generates ...This paper presents an experimental study of the broadband energy harvesting and dynamic responses of an L-shaped piezoelectric cantilever beam.Experimental results show that the L-shaped piezoelectric beam generates two optimal voltage peaks when the horizontal beam size is similar to the vertical beam size.Several optimized L-shaped piezoelectric cantilever beam structures are proposed.Power generation using the inverted bistable L-shaped beam is better.It is observed experimentally that the inverted bistable L-shaped beam structure shows obvious bistable characteristics and hard spring characteristics.Furthermore,the corresponding relationship between the bistable phase portrait and the potential energy curve is found in the experiment.This is the first time that a phase portrait for stiffness hardening of an L-shaped beam has been found experimentally.These results can be applied to analysis of new piezoelectric power generation structures.展开更多
Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structura...Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structural design is crucial.This paper proposes a dual-beam piezo-magneto-elastic wake-induced vibration energy harvesting system to enhance the functional performance of aeroelastic energy harvesters in environments with variable wind speeds.The system contains two piezoelectric beams coupled by magnets(forming upstream and downstream energy harvesters),and each beam is attached with a foam cylinder.A corresponding dynamic model is provided,and output characteristics are obtained at different wind speeds.Results and experimental verification indicate that both upstream and downstream energy harvesters can realize efficient energy harvesting.When the wind speed exceeds a certain critical value,the amplitudes of the system’s displacement and voltage are high.The wind speed threshold value is approximately 1.25 m/s.When the wind speed and magnet spacing are 10.2 m/s and 20 mm,respectively,the output power of the system reaches 4.9×10^(−4)W.Moreover,the wind speed threshold value of the proposed system can be adjusted by an equivalent nonlinear restoring force.展开更多
In recent years,high-end equipment is widely used in industry and the accuracy requirements of the equipment have been risen year by year.During the machining process,the high-end equipment failure may have a great im...In recent years,high-end equipment is widely used in industry and the accuracy requirements of the equipment have been risen year by year.During the machining process,the high-end equipment failure may have a great impact on the product quality.It is necessary to monitor the status of equipment and to predict fault diagnosis.At present,most of the condition monitoring devices for mechanical equipment have problems of large size,low precision and low energy utilization.A wireless self-powered intelligent spindle vibration acceleration sensor system based on piezoelectric energy harvesting is proposed.Based on rotor sensing technology,a sensor is made to mount on the tool holder and build the related circuit.Firstly,the energy management module collects the mechanical energy in the environment and converts the piezoelectric vibration energy into electric energy to provide 3.3 Vfor the subsequent circuit.The lithium battery supplies the system with additional power and monitors’the power of the energy storage circuit in real-time.Secondly,a three-axis acceleration sensor is used to collect,analyze and filter a series of signal processing operations of the vibration signal in the environment.The signal is sent to the upper computer by wireless transmission.The host computer outputs the corresponding X,Y,and Z channel waveforms and data under the condition of the spindle speed of 50∼2500 r/min with real-time monitoring.The KEIL5 platform is used to develop the system software.The small-size piezoelectric vibration sensor with high-speed,high-energy utilization,high accuracy,and easy installation is used for spindle monitoring.The experiment results show that the sensor system is available and practical.展开更多
Controlling the properties of piezoelectric thin films is a key aspect for designing highly efficient flexible electromechanical devices. In this stud)~ the crystallographic phenomena of PbZr1-xTixO3 (PZT) thin fil...Controlling the properties of piezoelectric thin films is a key aspect for designing highly efficient flexible electromechanical devices. In this stud)~ the crystallographic phenomena of PbZr1-xTixO3 (PZT) thin films caused by distinguished interfacial effects are deeply investigated by overlooking views, including not only an experimental demonstration but also ab initio modeling. The polymorphic phase balance and crystallinity, as well as the crystal orientation of PZT thin films at the morphotropic phase boundary (MPB), can be stably modulated using interfacial crystal structures. Here, interactions with MgO stabilize the PZT crystallographic system well and induce the texturing influences, while the PZT film remains quasi-stable on a conventional A1203 wafer. On the basis of this fundamental understanding, a high-output flexible energy harvester is developed using the controlled-PZT system, which shows significantly higher performance than the unmodified PZT generator. The voltage, current, and power densities are improved by 556%, 503%, and 822%, respectively, in comparison with the previous flexional single-crystalline piezoelectric device. Finally, the improved flexible generator is applied to harvest tiny vibrational energy from a real traffic system, and it is used to operate a commercial electronic unit. These results clearly indicate that atomic-scale designs can produce significant impacts on macroscopic applications.展开更多
In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy fr...In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy from ambient vibrations have been revolutionized.There’s an absence of experiment-based investigation which incorporates the microstructure analysis and crystal morphology of those energy harvest home materials.Moreover,the impact of variable mechanical and thermal load conditions has seldom been studied within the previous literature to utilize the effectiveness of those materials in several practical applications like structural health monitoring(SHM),etc.In the proposed research work,scanning electron microscope(SEM)and energy dispersive x-ray(EDX)analysis are performed to examine the inside crystal morphology of PZT-5A and ensure the quality of the piezoelectric ceramic.Further,the performance of piezoelectric vibration-based energy harvester has been investigated in the second phase of current research work under the variable mechanical and thermal load conditions through a regular series of experiments.It’s been found that the output voltage of piezoelectric sensors will increase by increasing the applied load,whereas a decreasing trend in output voltage is noticed by increasing the applied temperature,resistance and frequency.Within the third part,a measuring setup is developed in the laboratory to further investigate the effectiveness of PZT-5A in practical applications such as electromechanical impedance(EMI)based structural health monitoring under the controlled heating environment.Therefore,this analysis not only evaluates the performance of PZT sensors under the variable operating conditions but also encourages developing a temperature compensation approach in EMI-based SHM.展开更多
The key to self-powered technique is initiative to harvest energy from the surrounding environment. Harvesting energy from an ambient vibration source utilizing piezoelectrics emerged as a popular method. Effi- cient ...The key to self-powered technique is initiative to harvest energy from the surrounding environment. Harvesting energy from an ambient vibration source utilizing piezoelectrics emerged as a popular method. Effi- cient interface circuits become the main limitations of existing energy harvesting techniques. In this paper, an inter- face circuit for piezoelectric energy harvesting is presented. An active full bridge rectifier is adopted to improve the power efficiency by reducing the conduction loss on the rectifying path. A parallel synchronized switch harvesting on inductor (P-SSHI) technique is used to improve the power extraction capability from piezoelectric harvester, thereby trying to reach the theoretical maximum output power. An intermittent power management unit (IPMU) and an output capacitor-less low drop regulator (LDO) are also introduced. Active diodes (AD) instead of tradition- al passive ones are used to reduce the voltage loss over the rectifier, which results in a good power efficiency. The IPMU with hysteresis comparator ensures the interface circuit has a large transient output power by limiting the output voltage ranges from 2.2 to 2 V. The design is fabricated in a SMIC 0.18/~m CMOS technology. Simulation results show that the flipping efficiency of the P-SSHI circuit is over 80% with an off-chip inductor value of 820/zH. The output power the proposed rectifier can obtain is 44.4/~W, which is 6.7x improvement compared to the maximum output power of a traditional rectifier. Both the active diodes and the P-SSHI help to improve the output power of the proposed rectifier. LDO outputs a voltage of 1.8 V with the maximum 90% power efficiency. The proposed P-SSHI rectifier interface circuit can be self-powered without the need for additional power supply.展开更多
Piezoelectric energy harvesters(PEHs)fabricated using piezoceramics could convert directly the mechanical vibration energy in the environment into electrical energy.The high piezoelectric charge coefficient(d_(33))and...Piezoelectric energy harvesters(PEHs)fabricated using piezoceramics could convert directly the mechanical vibration energy in the environment into electrical energy.The high piezoelectric charge coefficient(d_(33))and large piezoelectric voltage coefficient(g_(33))are key factors for the high-performance PEHs.However,high d_(33)and large g_(33)are difficult to simultaneously achieve with respect to g_(33)=d_(33)/(e_(0)e_(r))and d_(33)=2Qe_(0)e_(r)P_(r).Herein,the energy harvesting performance is optimized by tailoring the CaZrO_(3)content in(0.964−x)(K_(0.52)Na_(0.48))(Nb_(0.96)Sb_(0.04))O_(3)-0.036(Bi_(0.5)Na_(0.5))ZrO_(3)-xCaZrO_(3)ceramics.First,the doping CaZrO_(3)could enhance the dielectric relaxation due to the compositional fluctuation and structural disordering,and thus reduce the domain size to~30 nm for x=0.006 sample.The nanodomains switch easily to external electric field,resulting in large polarization.Second,the rhombohedral-orthorhombic-tetragonal phases coexist in x=0.006 sample,which reduces the polarization anisotropy and thus improves the piezoelectric properties.The multiphase coexistence structures and miniaturized domains contribute to the excellent piezoelectric properties of d_(33)(354 pC/N).Furthermore,the dielectric relative permittivity(ε_(r))reduces monotonously as the CaZrO_(3)content increases due to the relatively low ion polarizability of Ca^(2+)and Zr^(4+).As a result,the optimized energy conversion coefficient(d_(33)×g_(33),5508×10^(−15)m^(2)/N)is achieved for x=0.006 sample.Most importantly,the assembled PEH with the optimal specimen shows the excellent output power(~48 mW)and lights up 45 red commercial light-emitting diodes(LEDs).This work demonstrates that tailoring ferroelectric/relaxor behavior in(K,Na)NbO_(3)-based piezoelectric ceramics could effectively enhance the electrical output of PEHs.展开更多
We fabricate a flexible hybrid nanogenerator (HNG), based on multilayered nanocomposite materials, which integrates a piezoelectric nanogenerator (PENG) and a triboelectric nanogenerator (TENG) into a single str...We fabricate a flexible hybrid nanogenerator (HNG), based on multilayered nanocomposite materials, which integrates a piezoelectric nanogenerator (PENG) and a triboelectric nanogenerator (TENG) into a single structure with only two electrodes. The HNG enables enhancement of the electrical output of the nano- generators. An open-circuit voltage of 280 V and a short-circuit current of 25 μA are achieved by a HNG of 2.5 cm × 2.5 cm in size, superior to the performance of previously reported HNGs. In addition, the energy-conversion process of the HNG relies on the working mechanism of both the PENG and TENG. The polarization direction and doping content of BTO are the two major factors that affect the electrical output. Biomechanical energy harvesting from walking motion or the bending of an arm is also demonstrated.展开更多
文摘A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy from the asphalt pavement in a large scale. The open circuit voltage of the harvester was obtained by the piezoelectric constant d<sub>33</sub> of the piezoelectric ceramic. The harvester is different from the cymbal harvester which works by the piezoelectric constant d<sub>31</sub>. The finite element model of the single harvester was constructed. The open circuit voltage increased with increase of the outer load. The finite element model of the single harvester buried in the asphalt pavement was built. The open circuit voltage, the deformation difference percent and the stress of the ceramic of the harvester were obtained with different buried depth. The open circuit voltage decreased when the buried depth was increased. The proper buried depth of the harvester should be selected as 30 - 50 mm. The effects of structure parameters on the open circuit voltage were gotten. The output voltage about 64.442 V could be obtained from a single harvester buried under 40 mm pavement at the vehicle load of 0.7 MPa. 0.047 mJ electric energy could be gotten in the harvester. The output power was about 0.705 mW at 15 Hz vehicle load frequency.
文摘This paper presents the results of the performance of piezoelectric cantilever beams in relation to their size.The total produced power represents the main indicator of performance of a piezoelectric harvesting system while the area of the beams stays constant.Lightweight design is an important aspect in any industry,mainly in the aerospace.In this study,the effects of non-uniformity on the efficiency and power output are studied.Finite element method(FEM)with the application of superconvergent element(SCE)is adopted here to solve the equations.It is observed that the trapezoidal geometry(converging beam)provides a higher output power while the efficiency decreases.Moreover,in order to prove that the power enhancement is achievable while the amount of piezoelectric material consumed is constant the new configuration is proposed.In the configuration,an array of uniform beams connected in series is used instead of one single rectangular beam.The proposed setting generates an output power of 1.817mWat a resonant frequency of 284.6 Hz when excited by an input acceleration of 1 g.The only challenge is the fundamental frequency difference which ismet with the application of proof mass and thinner substrate and piezoelectric layers.
文摘We demonstrate a piezoelectric vibration energy harvester with the ZnO piezoelectric film and an improved synchronous electric charge extraction energy harvesting circuit on the basis of the beam-type mechanical structure,especially investigate its output performance in vibration harvesting and ability to generate charges.By establishing the theoretical model for each of vibration and circuit,the numerical results of voltage and power output are obtained.By fabricating the prototype of this harvester,the quality of the sputtered film is explored.Theoretical and experimental analyses are conducted in open-circuit and closed-circuit conditions,where the open-circuit mode refers to the voltage output in relation to the ZnO film and external excitation,and the power output of the closed-circuit mode is relevant to resistance.Experimental findings show good agreement with the theoretical ones,in the output tendency.It is observed that the properties of ZnO film achieve regularly direct proportion to output performance under different excitations.Furthermore,a maximum experimental power output of 4.5 mW in a resistance range of 3 kΩ-8 kΩis achieved by using an improved synchronous electric charge extraction circuit.The result is not only more than three times the power output of classic circuit,but also can broaden the resistance to a large range of 5 kΩunder an identical maximum value of power output.In this study we demonstrate the fundamental mechanism of piezoelectric materials under multiple conditions and take an example to show the methods of fabricating and testing the ZnO film.Furthermore,it may contribute to a novel energy harvesting circuit with high output performance.
基金This wok was supported by the National Natural Science Foundation of China[grant number 61372044,61701250]Natural Science Foundation of Jiangsu Province[grant number BK20160895]+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China[grant number 14KJA510002]NUPTSF[grant number NY215009,NY215032,NY217029].
文摘This study discloses the diode’s influences on the piezoelectric energy harvesting performance.The piezoelectric-based energy harvesting system plays an important role in scavenging environment vibration energy into electrical energy,which can be utilized by low-power electronic devices.With respect to the interface circuit,a full-wave bridge circuit is usually needed to rectify the alternating current(AC)signal into a direct current(DC)signal.The full-wave bridge is composed of four diodes,whose characteristics may influence the harvested power significantly.Therefore,in this paper,the diodes’properties and influences on the energy harvesting performance are analyzed and presented via simulation and experimental studies.It is found the harvested energy has close relationship with the diode characteristics.For the high source impedance case,diode with low reverse leakage current is favorable.For the low source impedance case,diode with low forward voltage drop is favorable.The corresponding experimental study is carried out via a piezoelectric beam,which shows that the measured harvested power differences can almost be up to 800%for the same test structure.
基金the National Natural Science Foundation of China (Nos. 11802091and 12172127)the Hunan Province Science and Technology Innovation Program of China(Nos. 2020JJ3019 and 2019RS2044)the Scientific Researchof Hunan Provincial Department of Education of China (No. 21A0463)
文摘The low power and narrow speed range remain bottlenecks that constrain the application of small-scale wind energy harvesting.This paper proposes a simple,lowcost,and reliable method to address these critical issues.A galloping energy harvester with the cooperative mode of vibration and collision(GEH-VC)is presented.A pair of curved boundaries attached with functional materials are introduced,which not only improve the performance of the vibration energy harvesting system,but also convert more mechanical energy into electrical energy during collision.The beam deforms and the piezoelectric energy harvester(PEH)generates electricity during the flow-induced vibration.In addition,the beam contacts and separates from the boundaries,and the triboelectric nanogenerator(TENG)generates electricity during the collision.In order to reduce the influence of the boundaries on the aerodynamic performance and the feasibility of increasing the working area of the TENG,a vertical structure is designed.When the wind speed is high,the curved boundaries maintain a stable amplitude of the vibration system and increase the frequency of the vibration system,thereby avoiding damage to the piezoelectric sheet and improving the electromechanical conversion efficiency,and the TENG works with the PEH to generate electricity.Since the boundaries can protect the PEH at high wind speeds,its stiffness can be designed to be low to start working at low wind speeds.The electromechanical coupling dynamic model is established according to the GEH-VC operating principle and is verified experimentally.The results show that the GEH-VC has a wide range of operating wind speeds,and the average power can be increased by 180%compared with the traditional galloping PEH.The GEH-VC prototype is demonstrated to power a commercial temperature sensor.This study provides a novel perspective on the design of hybrid electromechanical conversion mechanisms,that is,to combine and collaborate based on their respective characteristics.
基金supported by the National Basic Research Pro-gram of China (2011CB610304)the National Science & Technology Major Project (2009ZX04014-034)the ResearchFund for the Doctoral Program of Higher Education of China (20090041110023)
文摘Converting ambient vibration energy into electrical energy by using piezoelectric energy harvester has attracted a lot of interest in the past few years.In this paper,a topology optimization based method is applied to simultaneously determine the optimal layout of the piezoelectric energy harvesting devices and the optimal position of the mass loading.The objective function is to maximize the energy harvesting performance over a range of vibration frequencies.Pseudo excitation method (PEM) is adopted to analyze structural stationary random responses,and sensitivity analysis is then performed by using the adjoint method.Numerical examples are presented to demonstrate the validity of the proposed approach.
基金Tsupported by the National Natural Science Foundation of China(11402014,11572023)the Royal Academy of Engineering for the project ‘‘Fast Nonlinear Aeroelastic Search for Loads Assessment’’(NCRP/1415/51)
文摘In this letter, a piezoaeroelastic energy harvester based on an airfoil with double plunge degrees of freedom is proposed to additionally take advantage of the vibrational energy of the airfoil pitch motion. An analytical model of the proposed energy harvesting system is built and compared with an equivalent model using the well-explored pitch-plunge configuration. The dynamic response and average power output of the harvester are numerically studied as the flow velocity exceeds the cut-in speed (flutter speed). It is found that the harvester with double-plunge configuration generates 4%-10% more power with varying flow velocities while reducing 670 of the cut-in speed than its counterpart.
基金supported by the National Natural Science Foundation of China(Grant Nos.12072267,12172266)。
文摘Wearable devices,interactive human-machine interface equipment,wireless sensors,and small-scale cleaning devices play crucial roles in biomedical implantation,disease treatment,health monitoring,environmental purification,etc.These devices require a sustainable energy source to work effectively.With the consideration of the global energy crisis and environmental pollution,researchers are exploring new,stable,and environmentally friendly methods to power these low-powered devices.Mechanical energy is one of the most abundant natural energy sources.Converting mechanical energy from the ambient environment or host structures into electrical energy via the direct piezoelectric effect is an efficient energy harvesting technique.This paper reviews the application of advanced piezoelectric materials,and small-scale self-powered and self-sensing piezoelectric devices at the cubic centimeter scale in energy harvesting and health monitoring of human,animal,machinery,roads,bridges,as well as the pollutant degradation of the environment.Some of these devices have the capability to not only harvest mechanical energy but also enable real-time monitoring and analysis of the electrical signals generated by the direct piezoelectric effect,facilitating prompt decision-making and appropriate responses.In addition,potential challenges and future prospects of small-scale self-powered and self-sensing piezoelectric devices are discussed.
基金the financial support of the National Natural Science Foundation of China(U22A20181,52275214,12272324).
文摘In this paper,a PZT(lead zirconate titanate)-based absorber and energy harvester(PAEH)is used for passive control of friction-induced stick-slip vibration in a friction system.Its stability condition coupled with PAEH is analytically derived,whose efficiency is then demonstrated by numerical simulation.The results show that the structural parameters of the PAEH can significantly affect the system stability,which increases with the mass ratio between the PAEH and the primary system,but first increases and then decreases with the natural frequency ratio between the PAEH and the primary system.The impacts of the electric parameters of the PAEH on the system stability are found to be insignificant.In addition,the PAEH can effectively suppress the stick-slip limit cycle magnitude in a wide working parameter range;however,it does not function well for friction systems in all the working conditions.The stick-slip vibration amplitude can be increased in the case of a large loading(normal)force.Finally,an experiment on a tribo-dynamometer validates the findings of the theoretical study,in which the vibration reduction and energy harvesting performance of the PAEH is fully demonstrated.
基金supported by the National Natural Science Foundation of China(Grants 11772008,11172009,11372015,11232009,10872010,11290152,10732020)the Tianjin Natural Science Foundation(Grant 19JCZDJC32300).
文摘This paper presents an experimental study of the broadband energy harvesting and dynamic responses of an L-shaped piezoelectric cantilever beam.Experimental results show that the L-shaped piezoelectric beam generates two optimal voltage peaks when the horizontal beam size is similar to the vertical beam size.Several optimized L-shaped piezoelectric cantilever beam structures are proposed.Power generation using the inverted bistable L-shaped beam is better.It is observed experimentally that the inverted bistable L-shaped beam structure shows obvious bistable characteristics and hard spring characteristics.Furthermore,the corresponding relationship between the bistable phase portrait and the potential energy curve is found in the experiment.This is the first time that a phase portrait for stiffness hardening of an L-shaped beam has been found experimentally.These results can be applied to analysis of new piezoelectric power generation structures.
基金supported by the National Natural Science Foundation of China(Grant No.52161135106)the Science,Technology and Innovation Commission of Shenzhen Municipality(Grant No.JCYJ201908061536-15091)+4 种基金the International Science and Technology Cooperation Project of Guangdong Province(Grant No.2021A0505030012)the Innovation Capability Support Plan of Shaanxi Province(Grant No.2020KJXX-021)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(Grant No.CX2022001)the 111 Project(Grant No.BP0719007)supported by the National Science Centre,Poland under the project SHENG-2(Grant No.2021/40/Q/ST8/00362)。
文摘Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structural design is crucial.This paper proposes a dual-beam piezo-magneto-elastic wake-induced vibration energy harvesting system to enhance the functional performance of aeroelastic energy harvesters in environments with variable wind speeds.The system contains two piezoelectric beams coupled by magnets(forming upstream and downstream energy harvesters),and each beam is attached with a foam cylinder.A corresponding dynamic model is provided,and output characteristics are obtained at different wind speeds.Results and experimental verification indicate that both upstream and downstream energy harvesters can realize efficient energy harvesting.When the wind speed exceeds a certain critical value,the amplitudes of the system’s displacement and voltage are high.The wind speed threshold value is approximately 1.25 m/s.When the wind speed and magnet spacing are 10.2 m/s and 20 mm,respectively,the output power of the system reaches 4.9×10^(−4)W.Moreover,the wind speed threshold value of the proposed system can be adjusted by an equivalent nonlinear restoring force.
基金supported by the National Natural Science Foundation of China(51975058).
文摘In recent years,high-end equipment is widely used in industry and the accuracy requirements of the equipment have been risen year by year.During the machining process,the high-end equipment failure may have a great impact on the product quality.It is necessary to monitor the status of equipment and to predict fault diagnosis.At present,most of the condition monitoring devices for mechanical equipment have problems of large size,low precision and low energy utilization.A wireless self-powered intelligent spindle vibration acceleration sensor system based on piezoelectric energy harvesting is proposed.Based on rotor sensing technology,a sensor is made to mount on the tool holder and build the related circuit.Firstly,the energy management module collects the mechanical energy in the environment and converts the piezoelectric vibration energy into electric energy to provide 3.3 Vfor the subsequent circuit.The lithium battery supplies the system with additional power and monitors’the power of the energy storage circuit in real-time.Secondly,a three-axis acceleration sensor is used to collect,analyze and filter a series of signal processing operations of the vibration signal in the environment.The signal is sent to the upper computer by wireless transmission.The host computer outputs the corresponding X,Y,and Z channel waveforms and data under the condition of the spindle speed of 50∼2500 r/min with real-time monitoring.The KEIL5 platform is used to develop the system software.The small-size piezoelectric vibration sensor with high-speed,high-energy utilization,high accuracy,and easy installation is used for spindle monitoring.The experiment results show that the sensor system is available and practical.
文摘Controlling the properties of piezoelectric thin films is a key aspect for designing highly efficient flexible electromechanical devices. In this stud)~ the crystallographic phenomena of PbZr1-xTixO3 (PZT) thin films caused by distinguished interfacial effects are deeply investigated by overlooking views, including not only an experimental demonstration but also ab initio modeling. The polymorphic phase balance and crystallinity, as well as the crystal orientation of PZT thin films at the morphotropic phase boundary (MPB), can be stably modulated using interfacial crystal structures. Here, interactions with MgO stabilize the PZT crystallographic system well and induce the texturing influences, while the PZT film remains quasi-stable on a conventional A1203 wafer. On the basis of this fundamental understanding, a high-output flexible energy harvester is developed using the controlled-PZT system, which shows significantly higher performance than the unmodified PZT generator. The voltage, current, and power densities are improved by 556%, 503%, and 822%, respectively, in comparison with the previous flexional single-crystalline piezoelectric device. Finally, the improved flexible generator is applied to harvest tiny vibrational energy from a real traffic system, and it is used to operate a commercial electronic unit. These results clearly indicate that atomic-scale designs can produce significant impacts on macroscopic applications.
基金University of Engineering and Technology Lahore,Pakistanand NFC IET Multan,Pakistan for financial and technical support to complete the current research work。
文摘In the previous couple of decades,techniques to reap energy and empower low voltage electronic devices have received outstanding attention.Most of the methods based on the piezoelectric effect to harvest the energy from ambient vibrations have been revolutionized.There’s an absence of experiment-based investigation which incorporates the microstructure analysis and crystal morphology of those energy harvest home materials.Moreover,the impact of variable mechanical and thermal load conditions has seldom been studied within the previous literature to utilize the effectiveness of those materials in several practical applications like structural health monitoring(SHM),etc.In the proposed research work,scanning electron microscope(SEM)and energy dispersive x-ray(EDX)analysis are performed to examine the inside crystal morphology of PZT-5A and ensure the quality of the piezoelectric ceramic.Further,the performance of piezoelectric vibration-based energy harvester has been investigated in the second phase of current research work under the variable mechanical and thermal load conditions through a regular series of experiments.It’s been found that the output voltage of piezoelectric sensors will increase by increasing the applied load,whereas a decreasing trend in output voltage is noticed by increasing the applied temperature,resistance and frequency.Within the third part,a measuring setup is developed in the laboratory to further investigate the effectiveness of PZT-5A in practical applications such as electromechanical impedance(EMI)based structural health monitoring under the controlled heating environment.Therefore,this analysis not only evaluates the performance of PZT sensors under the variable operating conditions but also encourages developing a temperature compensation approach in EMI-based SHM.
基金Project supported by the National Natural Science Foundation of China(Nos.61574103,U1709218)the Key Research and Development Program of Shaanxi Province(No.2017ZDXM-GY-006)
文摘The key to self-powered technique is initiative to harvest energy from the surrounding environment. Harvesting energy from an ambient vibration source utilizing piezoelectrics emerged as a popular method. Effi- cient interface circuits become the main limitations of existing energy harvesting techniques. In this paper, an inter- face circuit for piezoelectric energy harvesting is presented. An active full bridge rectifier is adopted to improve the power efficiency by reducing the conduction loss on the rectifying path. A parallel synchronized switch harvesting on inductor (P-SSHI) technique is used to improve the power extraction capability from piezoelectric harvester, thereby trying to reach the theoretical maximum output power. An intermittent power management unit (IPMU) and an output capacitor-less low drop regulator (LDO) are also introduced. Active diodes (AD) instead of tradition- al passive ones are used to reduce the voltage loss over the rectifier, which results in a good power efficiency. The IPMU with hysteresis comparator ensures the interface circuit has a large transient output power by limiting the output voltage ranges from 2.2 to 2 V. The design is fabricated in a SMIC 0.18/~m CMOS technology. Simulation results show that the flipping efficiency of the P-SSHI circuit is over 80% with an off-chip inductor value of 820/zH. The output power the proposed rectifier can obtain is 44.4/~W, which is 6.7x improvement compared to the maximum output power of a traditional rectifier. Both the active diodes and the P-SSHI help to improve the output power of the proposed rectifier. LDO outputs a voltage of 1.8 V with the maximum 90% power efficiency. The proposed P-SSHI rectifier interface circuit can be self-powered without the need for additional power supply.
基金This work was supported by the National Natural Science Foundation of China(Nos.52072150 and 51972146)the China Association for Science and Technology(Young Elite Scientists Sponsorship Program)the State Key Laboratory of New Ceramics and Fine Processing Tsinghua University(No.KF202002).
文摘Piezoelectric energy harvesters(PEHs)fabricated using piezoceramics could convert directly the mechanical vibration energy in the environment into electrical energy.The high piezoelectric charge coefficient(d_(33))and large piezoelectric voltage coefficient(g_(33))are key factors for the high-performance PEHs.However,high d_(33)and large g_(33)are difficult to simultaneously achieve with respect to g_(33)=d_(33)/(e_(0)e_(r))and d_(33)=2Qe_(0)e_(r)P_(r).Herein,the energy harvesting performance is optimized by tailoring the CaZrO_(3)content in(0.964−x)(K_(0.52)Na_(0.48))(Nb_(0.96)Sb_(0.04))O_(3)-0.036(Bi_(0.5)Na_(0.5))ZrO_(3)-xCaZrO_(3)ceramics.First,the doping CaZrO_(3)could enhance the dielectric relaxation due to the compositional fluctuation and structural disordering,and thus reduce the domain size to~30 nm for x=0.006 sample.The nanodomains switch easily to external electric field,resulting in large polarization.Second,the rhombohedral-orthorhombic-tetragonal phases coexist in x=0.006 sample,which reduces the polarization anisotropy and thus improves the piezoelectric properties.The multiphase coexistence structures and miniaturized domains contribute to the excellent piezoelectric properties of d_(33)(354 pC/N).Furthermore,the dielectric relative permittivity(ε_(r))reduces monotonously as the CaZrO_(3)content increases due to the relatively low ion polarizability of Ca^(2+)and Zr^(4+).As a result,the optimized energy conversion coefficient(d_(33)×g_(33),5508×10^(−15)m^(2)/N)is achieved for x=0.006 sample.Most importantly,the assembled PEH with the optimal specimen shows the excellent output power(~48 mW)and lights up 45 red commercial light-emitting diodes(LEDs).This work demonstrates that tailoring ferroelectric/relaxor behavior in(K,Na)NbO_(3)-based piezoelectric ceramics could effectively enhance the electrical output of PEHs.
基金This research was supported by the Chinese "thousands talents" program for pioneer researcher and by the National Natural Science Foundation of China (No. 51572030), Beijing Natural Science Foundation (No. 2162047), and Chongqing Natural Science and Foundation (No. cstc2016jcyjA0621).
文摘We fabricate a flexible hybrid nanogenerator (HNG), based on multilayered nanocomposite materials, which integrates a piezoelectric nanogenerator (PENG) and a triboelectric nanogenerator (TENG) into a single structure with only two electrodes. The HNG enables enhancement of the electrical output of the nano- generators. An open-circuit voltage of 280 V and a short-circuit current of 25 μA are achieved by a HNG of 2.5 cm × 2.5 cm in size, superior to the performance of previously reported HNGs. In addition, the energy-conversion process of the HNG relies on the working mechanism of both the PENG and TENG. The polarization direction and doping content of BTO are the two major factors that affect the electrical output. Biomechanical energy harvesting from walking motion or the bending of an arm is also demonstrated.