Based on the analysis of the pin-hole-output mechanism in the cycloid drive,a more accurate force analysis method is provided, in which the manufacture error is considered, bywhich the contact force between pin and pi...Based on the analysis of the pin-hole-output mechanism in the cycloid drive,a more accurate force analysis method is provided, in which the manufacture error is considered, bywhich the contact force between pin and pin-hole can be calculated more accurately in the wholedriving process.展开更多
The pitch-angle distribution of energetic particles is important for space physics studies on magnetic storm and particle acceleration.A‘pin-hole’imaging structure is built with the‘pin-hole’technique and a positi...The pitch-angle distribution of energetic particles is important for space physics studies on magnetic storm and particle acceleration.A‘pin-hole’imaging structure is built with the‘pin-hole’technique and a position sensitive detector,which can be used to measure the pitch angle distribution of energetic particles.To calibrate the angular response of the‘pin-hole’imaging structure,special experiment facilities are needed,such as the particle accelerator with special design.The features of this kind of particle accelerator are:1)The energy range of the outgoing particles should be mid-energy particles(tens keV to several hundred keV);2)the particle flux should be consistent in time-scale;3)the directions of the outgoing particles should be the same and 4)the particle number within the spot should be low enough.In this paper,a method to calibrate the angular response of the‘pin-hole’imaging structure by the90Sr/90Y β source with a collimator is introduced and simulated by Geant4 software.The result of the calibration with the collimated β source is in accord with the Geant4 simulations,which verifies the validity of this method.展开更多
重组竹是一种新型绿色装配式建材。销槽承压强度是现代竹结构节点设计的重要参数,对于确定节点承载性能和可靠度具有重要意义。为研究不同加载角度下的重组竹销槽承压性能,通过对7组35个重组竹试件开展全孔销槽承压静力加载试验,得到重...重组竹是一种新型绿色装配式建材。销槽承压强度是现代竹结构节点设计的重要参数,对于确定节点承载性能和可靠度具有重要意义。为研究不同加载角度下的重组竹销槽承压性能,通过对7组35个重组竹试件开展全孔销槽承压静力加载试验,得到重组竹全孔销槽承压荷载-位移曲线、破坏模态和销槽承压强度,分析了加载角度对重组竹销槽承压性能的影响。结果表明:重组竹销槽承压的荷载-位移曲线分为3个阶段;根据加载角度不同,具有2种典型的破坏模态;销槽承压强度在加载角度为0°,45°,90°时最低,加载角度为0°~45°和45°~90°时,均有一定程度的提高。将销槽承压强度试验值与欧洲标准(BS EN 383:2007)、美国标准(ANSI/NDS SUPP-2018)和中国标准(GB 50005—2017)中销槽承压强度计算公式得到的结果进行对比,得出了上述标准在计算重组竹销槽承压强度时存在一定局限性。最后在试验结果的基础上,提出了不同加载角度下的重组竹销槽承压强度建议计算公式,为现代竹结构中节点连接承载力的计算提供了参考。展开更多
基金National Natural Science Foundation of China(No.59075230).
文摘Based on the analysis of the pin-hole-output mechanism in the cycloid drive,a more accurate force analysis method is provided, in which the manufacture error is considered, bywhich the contact force between pin and pin-hole can be calculated more accurately in the wholedriving process.
基金supported by the National Natural Science Foundation of China(Grant Nos.40704026 and 41374167)
文摘The pitch-angle distribution of energetic particles is important for space physics studies on magnetic storm and particle acceleration.A‘pin-hole’imaging structure is built with the‘pin-hole’technique and a position sensitive detector,which can be used to measure the pitch angle distribution of energetic particles.To calibrate the angular response of the‘pin-hole’imaging structure,special experiment facilities are needed,such as the particle accelerator with special design.The features of this kind of particle accelerator are:1)The energy range of the outgoing particles should be mid-energy particles(tens keV to several hundred keV);2)the particle flux should be consistent in time-scale;3)the directions of the outgoing particles should be the same and 4)the particle number within the spot should be low enough.In this paper,a method to calibrate the angular response of the‘pin-hole’imaging structure by the90Sr/90Y β source with a collimator is introduced and simulated by Geant4 software.The result of the calibration with the collimated β source is in accord with the Geant4 simulations,which verifies the validity of this method.
文摘重组竹是一种新型绿色装配式建材。销槽承压强度是现代竹结构节点设计的重要参数,对于确定节点承载性能和可靠度具有重要意义。为研究不同加载角度下的重组竹销槽承压性能,通过对7组35个重组竹试件开展全孔销槽承压静力加载试验,得到重组竹全孔销槽承压荷载-位移曲线、破坏模态和销槽承压强度,分析了加载角度对重组竹销槽承压性能的影响。结果表明:重组竹销槽承压的荷载-位移曲线分为3个阶段;根据加载角度不同,具有2种典型的破坏模态;销槽承压强度在加载角度为0°,45°,90°时最低,加载角度为0°~45°和45°~90°时,均有一定程度的提高。将销槽承压强度试验值与欧洲标准(BS EN 383:2007)、美国标准(ANSI/NDS SUPP-2018)和中国标准(GB 50005—2017)中销槽承压强度计算公式得到的结果进行对比,得出了上述标准在计算重组竹销槽承压强度时存在一定局限性。最后在试验结果的基础上,提出了不同加载角度下的重组竹销槽承压强度建议计算公式,为现代竹结构中节点连接承载力的计算提供了参考。
