Pinus massoniana wood was modified by steam heat-treatment at 160℃,180℃,200℃ and 220℃ respectively and effects of the changes of density,pH,surface wettability and apparent morphology of Pinus massoniana heat-trea...Pinus massoniana wood was modified by steam heat-treatment at 160℃,180℃,200℃ and 220℃ respectively and effects of the changes of density,pH,surface wettability and apparent morphology of Pinus massoniana heat-treated wood on its bonding performance were studied in this paper.The results showed that Pinus massoniana wood underwent a series of physical and chemical changes during heat-treatment as the the following:(1)The degradation of hemicellulose and cellulose with low degree of polymerization,degradation and migration of the extract resulting in the decline of density and pH of heat-treated Pinus massoniana wood.(2)Brittle fracture occured on the cell wall surface,and the pit collapse,shrink and deformation,resulting in the formation of roughness and porosity on the wood surface.(3)The surface energy decreased with the improvement of temperature,the surface wettability of Pinus massoniana wood treated at 160℃–180℃ was good,while that at 200℃–220℃ showed hydrophobicity.(4)Changes of density,pH,surface roughness and porosity,and wettability resulted in a reduction in the bonding strength and reliability of heat-treated Pinus massoniana wood with MUF resin adhesive.(5)When the temperature was at 160℃–180℃,the better wettability of heat-treated Pinus massoniana wood could guarantee the better bonding performance.展开更多
Heat-treated wood has good dimensional stability,corrosion resistance and visual quality,but it is prone to mold,which limits its application.Based on the pH value of heat-treated wood,this study examines the factors ...Heat-treated wood has good dimensional stability,corrosion resistance and visual quality,but it is prone to mold,which limits its application.Based on the pH value of heat-treated wood,this study examines the factors affecting the pathogenesis causing heat-treated wood mold.Normally,the pH value of the heat-treated wood is between 4.38 and 5.10,which is suitable for the growth of mold.However,the pH of the heat-treated copper-containing material is between 6.63 and 7.12,which deviates the treated wood from the comfortable growth conditions for the mold,thereby reducing the occurrence of mold.展开更多
基金This work was supported by Science-technology Support Foundation of Guizhou Province of China(Nos.[2019]2308,NY[2015]3027,[2020]1Y125 and[2019]2325)National Natural Science Foundation of China(No.31800481)Forestry Department Foundation of Guizhou Province of China(Nos.[2017]14,[2018]13).
文摘Pinus massoniana wood was modified by steam heat-treatment at 160℃,180℃,200℃ and 220℃ respectively and effects of the changes of density,pH,surface wettability and apparent morphology of Pinus massoniana heat-treated wood on its bonding performance were studied in this paper.The results showed that Pinus massoniana wood underwent a series of physical and chemical changes during heat-treatment as the the following:(1)The degradation of hemicellulose and cellulose with low degree of polymerization,degradation and migration of the extract resulting in the decline of density and pH of heat-treated Pinus massoniana wood.(2)Brittle fracture occured on the cell wall surface,and the pit collapse,shrink and deformation,resulting in the formation of roughness and porosity on the wood surface.(3)The surface energy decreased with the improvement of temperature,the surface wettability of Pinus massoniana wood treated at 160℃–180℃ was good,while that at 200℃–220℃ showed hydrophobicity.(4)Changes of density,pH,surface roughness and porosity,and wettability resulted in a reduction in the bonding strength and reliability of heat-treated Pinus massoniana wood with MUF resin adhesive.(5)When the temperature was at 160℃–180℃,the better wettability of heat-treated Pinus massoniana wood could guarantee the better bonding performance.
基金Provincial Science and Technology Research Project of Guangdong(2014A040401043)
文摘Heat-treated wood has good dimensional stability,corrosion resistance and visual quality,but it is prone to mold,which limits its application.Based on the pH value of heat-treated wood,this study examines the factors affecting the pathogenesis causing heat-treated wood mold.Normally,the pH value of the heat-treated wood is between 4.38 and 5.10,which is suitable for the growth of mold.However,the pH of the heat-treated copper-containing material is between 6.63 and 7.12,which deviates the treated wood from the comfortable growth conditions for the mold,thereby reducing the occurrence of mold.
