This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into f...This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.展开更多
Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) layer, winding layer and outer PE layer. The winding layer...Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) layer, winding layer and outer PE layer. The winding layer is composed of two monolayers where steel wires are cross helically wound. An analytical procedure is developed to predict the short-term burst pressure of PSP as the monolayer is assumed to be elastic and orthotropic. The 3D anisotropic elasticity and Maximum Stress Failure Criterion are employed in the formulation of the elasticity problem. Good agreement between the theoretical results and the experimental data shows that the proposed approach can well predict the short-term burst pressure of PSP.展开更多
In the framework of the finite deformation theory, the plastic collapse analysis of thin-walled pipes subjected to the internal pressure is conducted on the basis of the unified strength criterion (USC). An analytic...In the framework of the finite deformation theory, the plastic collapse analysis of thin-walled pipes subjected to the internal pressure is conducted on the basis of the unified strength criterion (USC). An analytical solution of the burst pressure for pipes with capped ends is derived, which includes the strength differential effect and takes the influence of strength criterion on the burst pressure into account. In addition, a USC- based analytical solution of the burst pressure for end-opened pipes under the internal pressure is obtained. By discussion, it is found that for the end-capped pipes, the influence of different yield criteria and the strength differential effect on the burst pressure are significant, while for the end-opened pipes, the burst pressure is independent of the specific form of the strength criterion and strength difference in tension and compression.展开更多
In the framework of finite deformation theory, the burst failure analysis of end-opened defect-free pipes with plastic anisotropy under internal pressure is carried out. The analytical solutions of burst pressure and ...In the framework of finite deformation theory, the burst failure analysis of end-opened defect-free pipes with plastic anisotropy under internal pressure is carried out. The analytical solutions of burst pressure and the corresponding equivalent stress and strain are obtained for thin-walled pipes, which can take into account the effects of material plastic anisotropy and strain hardening exponent. The influences of plastic anisotropy on the burst pressure and the corresponding equivalent stress and strain are discussed. It is shown that the burst pressure and the corresponding equivalent stress and strain are dependent upon the plastic anisotropy of material, and the degree of dependence is related to the strain hardening exponent of material. In addition, the effects of the strain hardening exponent on burst failure are investigated.展开更多
基金National Natural Science Foundation of China under Grand No.51808190the Central Government Guides Local Science and Technology Development Fund Projects under Grand No.XZ202301YD0019C+2 种基金the Foundation of Key Laboratory of Soft Soils and Geoenvironmental Engineering(Zhejiang University)Ministry of Education under Grand No.2022P04the Central University Basic Research Fund of China under Grand No.B220202017。
文摘This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.
基金the New Century Excellent Talents in University, MOE, China (No. NCET-04-0526)the Specialized Research Fund for the Doctoral Program of Higher Education, MOE, China (No. J20050398)the Key Project of Wenzhou (No. G2004034), China
文摘Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) layer, winding layer and outer PE layer. The winding layer is composed of two monolayers where steel wires are cross helically wound. An analytical procedure is developed to predict the short-term burst pressure of PSP as the monolayer is assumed to be elastic and orthotropic. The 3D anisotropic elasticity and Maximum Stress Failure Criterion are employed in the formulation of the elasticity problem. Good agreement between the theoretical results and the experimental data shows that the proposed approach can well predict the short-term burst pressure of PSP.
基金Project supported by the National Natural Science Foundation of China (Nos. 51079128 and11172265)the Natural Science Foundation of Zhejiang Province of China (No. Y1101107)
文摘In the framework of the finite deformation theory, the plastic collapse analysis of thin-walled pipes subjected to the internal pressure is conducted on the basis of the unified strength criterion (USC). An analytical solution of the burst pressure for pipes with capped ends is derived, which includes the strength differential effect and takes the influence of strength criterion on the burst pressure into account. In addition, a USC- based analytical solution of the burst pressure for end-opened pipes under the internal pressure is obtained. By discussion, it is found that for the end-capped pipes, the influence of different yield criteria and the strength differential effect on the burst pressure are significant, while for the end-opened pipes, the burst pressure is independent of the specific form of the strength criterion and strength difference in tension and compression.
文摘In the framework of finite deformation theory, the burst failure analysis of end-opened defect-free pipes with plastic anisotropy under internal pressure is carried out. The analytical solutions of burst pressure and the corresponding equivalent stress and strain are obtained for thin-walled pipes, which can take into account the effects of material plastic anisotropy and strain hardening exponent. The influences of plastic anisotropy on the burst pressure and the corresponding equivalent stress and strain are discussed. It is shown that the burst pressure and the corresponding equivalent stress and strain are dependent upon the plastic anisotropy of material, and the degree of dependence is related to the strain hardening exponent of material. In addition, the effects of the strain hardening exponent on burst failure are investigated.
基金Project(52078129)supported by the National Natural Science Foundation of ChinaProjects(KYCX22_0268,SJCX21_0031)supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China。