Mechanics of a Grip System of Three-Key-Board Hydraulic Tongs Developed for Offshore Oil Pipe Lines

This paper carries out the analysis of mechanics of a grip system of three-key-board hydraulic tongs developed for offshore oil pipe lines which has been successfully used in oil fields in China. The main improvement of this system is that a lever frame structure is used in the structural design, which reduces greatly the stresses of the major components of the oil pipe tongs. Theoretical analysis and numerical calculation based on thirteen basic equations developed Show that the teeth board of the tongs is not easy to slip as frequently happens to other systems and is of higher reliability.

Experimental,Numerical,and Analytical Studies on the Bending of Mechanically Lined Pipe

Mechanically lined pipe(MLP)is often used for offshore oil and gas transport because of its low cost and corrosion resistance.During installation and operation,the pipe may undergo severe bending deformation,which causes the liner to separate from the outer pipe and buckles,affecting the stability of the whole line.In this paper,the buckling response of MLP subjected to bending is investigated to clarify its bending characteristics by employing both experiments,numerical simulation,as theoretical methods.Two types of MLPs were manufactured with GB 45 carbon steel(SLP)and Al 6061(ALP)used as the outer pipe material,respectively.The hydraulic expansion and bending experiments of small-scale MLPs are conducted.In addition to the ovalized shape of the cross-section for the SLP specimens,the copper liner was found to wrinkle on the compressive side.In contrast,the liner of ALP remains intact without developing any wrinkling and collapse mode.In addition,a dedicated numerical framework and theoretical models were also established.It was found both the manufacturing and bending responses of the MLP can be well reproduced,and the predicted maximum moment and critical curvatures are in good agreement with the experimental results.

Recent developments of large diameter X80 UOE line pipes

High-strength pipeline steel and large diameter line pipes are often used to increase the capacity of transportation and reduce the cost associated with the construction and operation of long-distance gas pipeline projects. China＇ s initiatives to construct long-distance natural gas pipelines has brought in new opportunities for the development of X80 line pipes. Baosteel has designed the optimum chemical composition of X80 with high niobium and low molybdenum content. In addition, a welding experimental platform and a finite element model （FEM） have supported the development of X80 UOE pipes in an efficient and economical way. The application and recent development of X80 UOE pipes were introduced in this paper. To comply with the requirements of the Second West-East Gas Pipeline Project （2^nd WEPP ）, X80 pipeline steel with low carbon bainite microstructure was developed by utilizing the optimized composition and TMCP process. The matching welding material, welding procedure and UOE forming processes for 1 219mm outside diameter X80 UOE pipes were also developed. More than 340 000 t of X80 UOE pipes were produced and applied in the 2^nd WEPP. Furthermore, to meet the prospective demand for long-distance gas pipelines with an annual transportation capacity of over 40 billion m3 ,larger size X80 UOE pipes with 1 422 mm OD × 30. 8 mm WT were trial produced recently. DWTT performance, the main technical challenge for heavier wall pipes, was improved by using optimized microstructural design. The newly developed X80 pipes can be potentially used for larger transportation capacity pipelines in China.

Theoretical and experimental study of the thermal strength of anticorrosive lined steel pipes

Bimetallic lined steel pipe （LSP） is a new anti-corrosion technology. It is widely used to transport oil, gas, water and corrosive liquid chemicals. At present, the hydroforming pressure for LSP has been investigated theoretically and experimentally by most researchers. However, there are a few reports on the thermal strength of bimetallic LSP. Actually, the bimetallic LSP will be subjected to remarkable thermal load in the process of three layer polyethylene （3PE） external coating. Reverse yielding failure may occur on the inner pipe of the bimetallic LSP when it suffers from remarkable thermal load and residual contact pressure simultaneously. The aim of this paper is to study the thermal load and strength of the bimetallic LSP. A mechanical model, which can estimate the thermal strength of the bimetallic LSP, was established based on the elastic theory and the manufacture of the bimetallic LSP. Based on the model, the correlation between the thermal strength of the bimetallic LSP and residual contact pressure and wall thickness of the inner pipe was obtained. Reverse yielding experiments were performed on the LSP （NT80SS-316L） under different thermal loads. Experiment results are consistent with calculated results from the theoretical model. The experimental and simulation results may provide powerful guidance for the bimetallic LSP production and use.

Investigation of the Leaching Behavior of Mortar Pipe Lining in Drinking Water

The leaching behavior of three types of mortars was investigated using a self-design device which could simulate the field conditions of pipe lining. The results by ICP and ESEM measurement show that the developed slag cement mortar is suitable for the lining of cast iron pipe that is used for delivering drinking water.

THE DEVELOPMENT OF MINOR-CALIBER COMPOSITE PIPES ON CORROSIVE WEAR-RESISTANT

The ceramic lined pipes had been produced by gravitational separation SHS method and influential factors on combustion synthesis was investigated.The experimental results showed that the ceramic lined pipes had been produced easily under condition that selecting pipes well distributed on the wall thickness ,proper preheating temperature and appropriate additive.

Automatic girth welding and performance evaluation of the joints of hot-induction-bend and line pipes with different wall thickness

During the process of laying long-distance oil and gas transmission pipelines, the hot-induction-bend method is extensively used when the direction has to be changed. By considering the pipeline＇ s ongoing processing and loading states during service, the pipeline that is generally used exhibits thicker walls than those that are observed in the line pipe. As such, during pipeline construction, hot-induction-bend and line pipes with different wall thickness are girth-welded. The chemical composition of hot-induction-bend and line pipes differs, with the carbon content being particularly higher in the hot-induction-bend pipe;it also depicts a higher carbon equivalent, which makes it possible to modify the girth of the pipe. In this study, using Baosteel＇ s standard X70M UOE hot- induction-bend and line pipes, solid-wire automatic gas-metal-arc girth welding was performed and the performance of the girth-welded joint was evaluated. Furthermore,the weldability of the pipeline girth and the microstructure of the girth-welded joint were analyzed. The results reveal that Baosteel＇ s standard UOE hot-induction-bend and line pipes exhibit good girth weldability, and their technical quality can be guaranteed in case of consumer field- construction applications.

Vibration Monitoring and Diagnosis of Pipe-line Pumps on Offshore Platforms

This paper presents the applications of vibration monitoring and a diagnosis technique on the predictive maintenance of pipe line pumps on offshore platforms. The monitored ten pumps are distributed on the past three petroleum platforms of the CACT (C: China offshove Southern; A: Agip; C: Chivron; T: Texaco) Operation Group in the Huizhou oil field. By the periodical vibration survey in recent three years, the typical faults and the vibration features of these pumps have been summarized, which set up the basis for efficient predictive maintenance of this key equipment offshore.

Mathematical Model of Microstructure Evolution of X60 Line Pipe Steel During CSP Hot Rolling

An integrated process modelling system for simulating the microstructure evolution of Nb-microalloyed HSLA steel produced in CSP hot rolling process has been developed on the basis of the microstructure simulation and mechanical properties prediction technology. 3-D thermomechanical coupled finite element models for simulating hot strip rolling have been developed and the distribution of equivalent plastic strain through the thickness direction of the rolled material by CSP rolling was obtained. Thus the distribution of temperature, strain and strain rate through the thickness of the steel stocks, as well as the microstructure evolution during hot rolling of X60 line pipe steel strip has been investigated by using the developed integrated process modelling system. In addition, the determination and optimization of controllable process parameters during CSP hot strip rolling for the Nb-microalloyed X60 line pipe steel have been implemented, and control strategies such as adopting larger pass reduction in the first stand, arranging appropriate pass interval times and proper rolling speed, to reduce or eliminate mixed grain microstructure of Nb microalloyed strip in CSP processing have been proposed.

Microstructure and Deformation Mechanics of X100 Line Pipe Steel

In present paper,microstructure is observed by means of OM,SEM,EBSD and TEM analysis on material obtained from X100 linepipe with wall thickness as 20.6mm and outside diameter as 1016mm diameter Grade 690.To study the deformation mechanics,microstructure transformation is also investigated on deformed specimens with different strain level as 0%,5% and 8%.Results show that X100 line pipe material consists mainly of acicular ferrite whose ratio in material reaches 64%,obvious cellular structures formed by tangled dislocation and M/A island distributed in acicular plates indicate abundant dislocation and substructure existed in material.It is measured that line pipe steel has a much finer effective grain size as 2.07μm,which can results in a higher strength and toughness for line pipe steel.Contrast analysis for Kikuchi Pattern reveals that the ratio of large-angle boundary is comparatively higher as 55%,implying that line pipe steel has a good toughness.It is observed that the proportion of small-angle grain boundary increases greatly after material deformed,which consequently results in the increment of dislocation and sub-structure.

Controlling Properties of HSLA Line Pipe Steels for Oil and Gas Applications

DANIELI has recently implemented its Coil Quality Estimator (DANIELI-CQETM) system to the Hot Strip Mill of United Metallurgical Company (OMK) at Vyksa,Russia.This system is developed for the purpose of real time assessment and control of mechanical properties for hot rolled coils.Mechanical properties such as strength,toughness,ductility and hardness are predicted over the entire length of a strip while it is processed.The property estimation is based on the final microstructure as predicted from a group of interconnected physically based metallurgical models,supplemented by Artificial Neural Network.The CQE system is used for prediction and control of properties of HSLA line pipe grades steel and other grades.The system performance,is judged by accuracy and reliability of prediction,has been compared with the physical material testing data from the plant.The results are found to be excellent.CQE is found useful for generation of test certificate of coil,quality assurance,process control,product development,and customer claim assessment.It is used for resource optimization for production,and other operational improvements such as reduction of downgrades.The present paper shares the results of CQE performance for prediction of HSLA line pipe grade steels.

Microstructure Development for Brittle Fracture Control in Nb Microalloyed Line Pipe Steel

EBSD characterization of density and dispersion of high angle boundaries was carried out in niobium microalloyed steels of HTP base chemistry with 0.09 wt % Nb,which were thermo-mechanically processed under laboratory conditions.Similar studies were carried out in higher grade (X-100 and above) line pipe steels with different chemistries,which were processed under simulation of industrial rolling conditions.The twin objectives are (i) to understand the effect of chemistry and processing parameters on the density and dispersion of high angle boundaries,and (ii) to correlate the microstructure and density of high angle boundaries with strength and fracture properties.The present studies confirm that refinement of austenite grain size prior to pancaking,large strain accumulation in austenite conditioning,alloy design with high hardenability and high cooling rates are essential to control high density and uniformity of dispersion of high angle boundaries in the final microstructure in order to achieve high strength,toughness,low DBTT and consistently 100% ductile shear in DWTT in thermo-mechanically rolled higher grade line pipe steels.