Effect of Ca^(2+) on CO_2 corrosion properties of X65 pipeline steel

The effect of Ca^2＋ on CO2 corrosion to X65 pipeline steel was investigated in the simulated stratum water of an oil field containing different concentrations of Ca^2＋. It is found that Ca^2＋ can enhance the corrosion rate, especially in the Ca^2＋ concentration from 256 to 512 mg/L, which can be attributed to the growing grain size and loosing structure of corrosion scales with increasing Ca^2＋ concentration. X-ray diffraction （XRD） and X-ray photoelectron spectroscopy （XPS） investigations reveal that a complex carbonate （Fe, Ca）CO3 forms at high Ca^2＋ concentration due to the gradual replacement of Fe^2＋ in FeCO3 by Ca^2＋.

Ultimate Load Capacity of Offshore Pipeline with Arbitrary Shape Corrosion Defects

A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anisotropic material characteristics in longitudinal and circumferential direction of pipeline are also considered in the proposed equations. Simplified numerical method is used to solve the generalized expressions. The comparisons of numerical results based generalized solutions and full-scale experimental results are carried out. The predicted results agree reasonably well with the experiment results. Meanwhile, the effects of corrosion shapes and locations on the ultimate load capacity are studied.

Corrosion behavior and characteristics of the product film of API X100 steel in acidic simulated soil solution

The short-term corrosion behavior of API X100 steel in an acidic simulated soil was investigated by electrochemical measurements and soaking experiments,followed by corrosion morphology observations and X-ray photoelectron spectroscopy analyses.The results show that X100 steel exhibits an obvious pitting susceptibility in an acidic soil environment.Pits nucleate after approximately 10 h of immersion.Along with the nucleation and growth of the pits,the charge-transfer resistance and open-circuit potential first increase sharply,then decrease slowly,and eventually reach a steady state.The maxima of the charge-transfer resistance and open-circuit potential are attained at approximately 10 h.The evolution of the electrochemical process is confirmed by the analysis of the product film.The product film exhibits a porous and loose structure and could not protect the substrate well.The product film is primarily composed of ferrous carbonate and ferrous hydroxide（Fe（OH）2）.The concentration of Fe（OH）2 in the product film increases from the inside to the outside layer.

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.

Hydroxyl carboxylate based non-phosphorus corrosion inhibition process for reclaimed water pipeline and downstream recirculating cooling water system

A combined process was developed to inhibit the corrosion both in the pipeline of reclaimed water supplies（PRWS） and in downstream recirculating cooling water systems（RCWS）using the reclaimed water as makeup. Hydroxyl carboxylate-based corrosion inhibitors（e.g.,gluconate, citrate, tartrate） and zinc sulfate heptahydrate, which provided Zn^2＋ as a synergistic corrosion inhibition additive, were added prior to the PRWS when the phosphate（which could be utilized as a corrosion inhibitor） content in the reclaimed water was below 1.7 mg/L, and no additional corrosion inhibitors were required for the downstream RCWS.Satisfactory corrosion inhibition was achieved even if the RCWS was operated under the condition of high numbers of concentration cycles. The corrosion inhibition requirement was also met by the appropriate combination of PO4^3- and Zn^2＋ when the phosphate content in the reclaimed water was more than 1.7 mg/L. The process integrated not only water reclamation and reuse, and the operation of a highly concentrated RCWS, but also the comprehensive utilization of phosphate in reclaimed water and the application of non-phosphorus corrosion inhibitors. The proposed process reduced the operating cost of the PRWS and the RCWS, and lowered the environmental hazard caused by the excessive discharge of phosphate. Furthermore, larger amounts of water resources could be conserved as a result.

Relationship between microstructure and hydrogen induced cracking behavior in a low alloy pipeline steel

Hydrogen induced cracking（HIC） behaviors of a high strength pipeline steel with three different microstructures, granular bainite ＆ lath bainite（GB ＋ LB）, granular bainite ＆ acicular ferrite（GB ＋ AF）, and quasi-polygonal ferrite（QF）, were studied by using corrosion experiment based on standard NACE TM0284. The HIC experiment was conducted in hydrogen sulfide（H_2S）-saturated solution. The experimental results show that the steel with GB ＋ AF and QF microstructure present excellent corrosion resistance to HIC, whereas the phases of bainite lath and martensite/austenite in LB ＋ GB microstructure are responsible for poor corrosion resistance. Compared with ferrite phase, the bainite microstructure exhibits higher strength and crack susceptibility of HIC. The AF ＋ GB microstructure is believed to have the best combination of mechanical properties and resistance to HIC among the designed steels.