Assessing Flexible Places for Adaptive Urban Design:A New Method and the Case of Cittaducale

Each place has its own peculiarities,determining that the resilience and adaptation to diverse types of risks will be different,requiring different time and methods for mitigation as well.The coexistence of several risks determines further resolution difficulties as commonly,since risks are sudden and unforeseen,there is a tendency to treat the last risk more carefully,neglecting the previous one even if it is just as important.Most of the methodologies used to analyse areas affected by different risks are aimed at focusing in particular on seismic risks without considering those relating to intangible aspects linked to the identity of the places or aspects related to urban health and liveability.And,more in general,in relation to design aspects,urban methodologies do not consider all the results of the analyses,maybe for the difficulty deriving from translating the complexity of collected data in project interventions.Starting from these premises,the objective of the article,elaborated within the SISMI and PRIN 2020 research projects is to propose an original methodology capable of analysing the places affected by multiple risks and planning its resilience attentive to its cultural resources and to its liveability.To this end,the proposed method will be aimed at creating flexible and adaptive places and the case-study of Cittaducale will be illustrated.Criticalities and qualities of this place affected by an earthquake in 2016 will be reported and project interventions to transform its risks into opportunities will be shown.

Effect of Spinning Parameters on Thick, Thin Places and Neps of Rotor Spun Yarn

Defect free yarn is a great demand for spinner, knitter, and weaver and also other textile personnel because numerous end products from knit apparels to woven fabrics, from towels to sheets and from carpets to industrial fabrics characteristics significantly depend on the physical properties of yarn. The qualities of rotor yarn are really directed by spinning parameters. The aim of this study is to observe the effect of spinning parameters such as rotor diameter and speed on thick, thin places and neps of yarn in rotor spinning process. 0.11 sliver hank of 100% cotton was used to produce 12 Ne yarn. 65% virgin cotton and 35% wastage cotton were mixed together. The positive impact of spinning parameters on yarn properties were accessed by thick places, thin places and neps. Results indicate that the yarn qualities were improved with increasing of rotor speed and rotor diameter. The rotor diameter was settled to 43 mm while rotor speed fluctuated from 35,000 to 45,000 rpm and rotor speed was fixed to 35,000 rpm while rotor diameter across contrasts from 43 mm to 66 mm.

Contribution of public places in proliferation of dengue vectors in Penang Island,Malaysia

Objective: To determine abundance, distribution and diversity of potential breeding container habitats of the dengue vectors in public places including schools, restaurants,mosques and parks in southwest areas of Penang Island, Malaysia.Methods: Premises at restaurants, schools, parks and mosques were surveyed simultaneously and inspected visually for container habitats and production of immature mosquitoes from March 2015 to March 2016. Abundance(mean ± SE) of breeding containers between sites was compared using One-way ANOVA. Independent sample ttest was used to compare total number of Aedes albopictus(Ae. albopictus) and Aedes aegypti(Ae. aegypti) surveyed.Results: The surveyed locations yielded a total of 3 741 breeding containers and 19 537 immature mosquitoes from four areas. Concurrent artificial and natural containers produced 78.4% immature Ae. albopictus and 6.3% Ae. aegypti mosquitoes in wet season,with 14.2% Ae. albopictus and 1.1% Ae. aegypti mosquitoes in dry season. Artificial containers accounted for 98.1% of the total containers recorded, with restaurants being the most productive locations(8 012) and schools being the least productive(2 234).Conclusions: It was concluded that public places are good sources of potential container habitats of Aedes mosquitoes in Penang Island, Malaysia and Ae. albopictus has exclusively replaced the home-grown Ae. aegypti even in urban areas. Therefore, treatment of artificial containers in such locations is critical in Aedes mosquito control campaigns during dengue outbreaks.

Going places教学设计比较研究

人都说编辑是为她人做嫁衣裳的幕后英雄，但每天看那么多稿件、接触那么多教师、校长、教育专家．总有一些感触和想法如鲠在喉、不吐不快。所以斗胆站在这里，“编看编说”，与您分享我最真实的心情。

Signifying,Spiritual Places and Langston Hughes's Poems

Hughes's inheritance of literal language rooted in spiritual places constitutes important aspect of Hughes's parody of African American literary tradition.Three categories of themes about spiritual places of African American literary tradition were discussed in this essay to show better understanding of Hughes's poems from Signifying perspective.

Modeling of Fuel Elements Cycling System in Pebble Bed Reactor Based on Timed Places Control Petri Nets

Pebble bed reactors use cycling scheme of spherical fuel elements relying on fuel elements cycling system (FECS). The structure and control logic of FECS are very complex. Each control link has strict requirements on time and sequence. This increases the difficulties of description and analysis. In this paper, timed places control Petri nets (TPCPN) is applied for the modeling of FECS. On this basis the simulation of two important processes, namely uploading fuel elements into the core for the first time and emptying the core is finished by simulation software Arena. The results show that as TPCPN is able to describe different kinds of logic relationship and has time properties and control properties, it’s very suitable for the modeling and analysis of FECS.

Improving Conviviality in Public Places： The Case of Naples, Italy

Under the umbrella concept of conviviality in public spaces, a research project on the rehabilitation of urban areas for commercial and retail uses---as engine of a complex process of production of places for social and cultural mixit6--has been defined. The aim of this research has been to produce useful tools for coping with the abandonment of public spaces in former commercial urban areas, without generating anonymous and globalized commercial districts. Through involving local stakeholders in a participatory process, the first phase of the research here presented needs to demonstrate the possible effectiveness of a pilot action plan in dealing with both isolation and gentrification processes of historical centres. The main hypothesis is that traditional retailers should be considered an essential element to ensure effective public use of urban public spaces. The research methodology is based on a qualitative approach. Focussing on the process of impoverishment within local commercial districts, the research group started working with local stakeholders in order to identify priorities and criticisms for enhancing a regeneration process. The case study to be carried out in Naples is the historical market place of Piazza Mercato in the Citth Bassa of Naples （Italy）.

Design and Availability Research of a Flammable and Explosive Volatiles Monitoring and Early Warning System (FEVMEW) for the Bus Crowded Places

In order to reduce the arson or accidental fire losses, we developed a gas sensitive detector used for the rapid detection and early warning of flammables in crowded places such as buses. A MEMS (Micro-Electro-Mechanical System) based thin film semiconductor was fabricated as the gas sensor. To obtain the target gas selective response, the surface of the sensitive film was modified with highly active metal catalytic nano-particles. Thus the anti-interference ability was improved and the false alarm rate was effectively reduced. Furthermore, the modular embedded system for information acquisition and transmission was developed. Supported by the Airflow Precision control system (APs), the rapid warning of volatile gas of flammable substances was realized. Experiments showed that RAs has satisfied selectivity to volatiles of usual flammable liquid, such as the output voltage reaches 3 V (0 - 3.3 V). With simulation about the actual installation state in bus, MWs sounds an alarm at 2 minutes after splashing 50 mL 92# petrol to the floor. For the last two years, FEVMEW has been integrated into more than 4000 buses in Hefei. This design has been proved feasible according to the actual operation.

STRENGTHEN GUANGDONG-HONG-KONG ECONOMIC AND TRADE COOPERATION AND PROMOTE THE PROSPERITY AND STABILITY OF THE TWO PLACES

"The green mountains cannot prevent a river from flowing, inevitably,its running eastward continues". The day when HongKong returns to theembrace of the motherland is imminent and it has become an importantissue attracting the common attentions of various provinces and citiesthroughout the country to further study the issue of, and promote, economic and trade cooperation with HongKong. Guangdong Provice hasclose geographical, human and mutually dependent relations withHongKong and therefore feels more concerned.

A First Tour of Wulong Pool——Nanjing city, the ancient capital of six dynasties, had kept lots of interesting places and historical relics for us to explore.

Last October, the Nanjing-based aiwan, Hongkong, Macao and verseas Chinese Literature Society went to Wulong Pool. Zhang Chao, vice-chairman of the society, invited me to go to see the place with him. We went eastward out of Longpanli along bustling and seething Guangzhou Avenue. by the side of the high Suolong Bridge, we found a garden gate with flower-

Oil Giants Take First Two Places in China 100

Fortune magazine has released China 100 in its September issue. This is the second consecutive year Fortune has released China 100. The ranking is made according to the business income of the country's major companies in 2001.

Marriage Choices in Contemporary Italy.Couples’Places of Meeting Between Individualization and Structural Determinants

This article focuses on the study of the places where spouses first met in contemporary Italy.Using data provided by the nationally representative survey“Family,Social Subjects and the Life Cycle”,carried out in 2016 by Italian National Institute of Statistics(Istat)and made available in 2020,the article investigates trends in couples’places of meeting and the relation between contexts of meeting and structural determinants such as social class and territorial affiliation.The results support the idea that even in contemporary societies partner’s choice is shaped by a set of social and cultural constraints and is not solely the result of personal preferences inspired by the ideal of romantic love.

Word Search Puzzle: Places

Instructions:Read the clues(information that helps you to find the answers)and find the words they describe.The words can go any way,but the letters are always next to each other.The first clue is done for you.

DIAGNOSTICS OF FATIGUE CRACK IN ULTERIOR PLACES OF LARGER-SCALE OVERLOADED SUPPORTING SHAFT BASED ON TIME SERIES AND NEURAL NETWORKS

To improve the diagnosis accuracy and self-adaptability of fatigue crack in ulterior place of the supporting shaft, time series and neural network are attempted to be applied in research on diag-nosing the fatigue crack’s degree based on analyzing the vibration characteristics of the supporting shaft. By analyzing the characteristic parameter which is easy to be detected from the supporting shaft’s exterior, the time series model parameter which is hypersensitive to the situation of fatigue crack in ulterior place of the supporting shaft is the target input of neural network, and the fatigue crack’s degree value of supporting shaft is the output. The BP network model can be built and net-work can be trained after the structural parameters of network are selected. Furthermore, choosing the other two different group data can test the network. The test result will verify the validity of the BP network model. The result of experiment shows that the method of time series and neural network are effective to diagnose the occurrence and the development of the fatigue crack’s degree in ulterior place of the supporting shaft.

Spatial Structure of Central Places in Jilin Central Urban Agglomeration, Jilin Province, China

Using the radius of gyration from fractal theory, this paper describes the calculation of fractal dimensions for the four tiers of central places in the Jilin Central Urban Agglomeration(JCUA), Jilin Province, China and the structural characteristics of each tier: 1) the 1st tier central place, Changchun Proper(not including Shuangyang District), provides the most service functions and has the most stable primate position; 2) the 2nd tier central places, Jilin Proper, Siping Proper, Liaoyuan Proper and Songyuan Proper have unclear statuses and do not provide certain functions; 3) the 3rd tier central places comprise 23 county-level cities, counties and urban districts(including Shuangyang District of Changchun), exhibiting a dense spatial structure that agrees with theory; 4) the 4th tier contains the largest number of central places(248 designated towns), but they are loosely distributed. In this study, a spatial image of the JCUA was created, based on vectorized data of the urban settlement distribution, which was then modified and abstracted to create a hexagonal network covering the JCUA. Compared to the traditional central place model, the modified spatial image conforms to the K = 3 principle. In reality, however, the growth of some 3rd tier central places should be increased with the cities being upgraded to the 2nd tier so as to overcome that tier′s functional deficiency. The loose distribution in the 4th tier should also be changed. This apparent anomaly can be explained by the fact that the classic hexagon model used to describe the way market areas layout does not exist in the real world. However, this should not be viewed as an obstacle to using central place theory. If its assumptions are properly applied, it can still assist research into the spatial structure of regions.

Studies on the Levels of Indoor PM10 and PM2.5 in Public Places in Chaoyang District, Beijing

[Objective]The research aimed to understand the levels of indoor air particles of PM_(10) and PM_(2.5)in public places in Chaoyang District of Beijing City,which will provide scientific basis for making health standards and policies and regulations of indoor air particulate matter in public places.[Method]In order to characterize indoor air quality of public places,shopping mall near the walking street,shopping mall near arterial traffic,barbecue style restaurant and eat hutch unicom Chinese restaurant were selected for this study.LD-3Claser measuring dust detector and Sidepak AM-510 artificial intelligence anti-explosion dust detector were used to test the levels of PM_(10) and PM_(2.5)in the air of the shopping malls and restaurants.The number of smoking customers and if smelling the smoke were recorded simultaneously.[Result]The average densities of PM_(10) and PM_(2.5)in the shopping mall near the walking street were noticeably lower than that near arterial traffic(P< 0.05).The highest level of PM_(2.5)at the barbecue style restaurant and eating hutch unicom Chinese restaurants were 1 090and666g/m^3.The average levels of PM_(10) at the barbecue style restaurant and eating hutch unicom restaurants were 286 and 399g/m3(P<0.05).[Conclusion]The indoor PM_(10) and PM_(2.5)concentrations were high in public places,especially in shopping mall near arterial traffic and restaurant.It should be enhanced to supervise indoor air in public places and establish the risk rating of indoor air quality to protect public health.