Simple Planar Structure Hydrogen Gas Sensor Device with Large Response

Hydrogen gas sensor device with simple planar structure based on p^+ silicon substrate with n-type epi-layer was fabricated only by using a lift-off technique of an evaporated metal film.The device consists of Ohmic source and drain electrodes and platinum Schottky gate electrode.This sensor device has a little similar property as FET.Current-voltage characteristics between the source and drain of the device are sensitive to hydrogen gas.The voltage difference between in hydrogen ambient and oxygen ambient is about 2.3 volts for a constant current of 0.9 mA.The device can detect 0.4% hydrogen gas in air.Based on oxidation reaction of hydrogen on the surface of the platinum gate,hydrogen sensitivity of the device changes by the coexisting oxygen concentration.Electrons flow in the buried channel formed between the gate electrode and the p^+n junction.It was confirmed that the gate bias influences the properties.The current-voltage property changes also depending on the wiring method.

Electromagnetic Modeling of a Planar Structure Integrating a Via-Hole Using the Method FWCIP

We present in this paper a new formulation of the iterative method FWCIP “Fast Wave Concept Iterative Process” based on the wave concept. It calculates the electromagnetic parameters of a planar structure including a via-hole. This is modelled by the electromagnetic field that it creates in the structure. The validation of results found by this new formulation is ensured by comparison with those obtained by HFSS “high frequency structural simulator” software from Ansoft. They show that they are in good agreement.

Analysis of generation of cumulative second harmonics of Lamb modes in a layered planar structure

A technique for analyzing the nonlinear generation of the cumulative second har-monics of generalized Lamb modes in a layered planar structure is developed. A theoretical model for nonlinear generalized Lamb mode propagation in a layered planar structure has been established, based on a partial plane wave approach. The nonlinearity is treated as a second-order perturbation of the linear elastic response. This model reveals some interesting features of the physics of the cumulative second harmonic generation. Although Lamb mode propagation is dispersive in a layered structure, the results of this analysis show that the amplitudes of the second harmonics do accumulate with propagation distance under certain special conditions. On the basis of the boundary and initial conditions of excitation, the formal solution of the cumulative second harmonic has been derived. Using the formal solution, we have performed some numerical simulations and obtained the cumulative second harmonic field patterns, illus-trating the distortion effect along the propagation distance, as well as the dependence of the field patterns on the position of the excitation source.

Recent Progress in High-efficiency Planar-structure Perovskite Solar Cells

Lead halide perovskite owns charge diffusion length in micrometer range,which makes the planar-structure solar cells possible.The simple and lowtemperature process of planar devices makes it very promising.The power conversion efficiency of planar perovskite solar cells has increased from 1.8%to 23.7%in past several years,which can compete with the mesoporous structure counterpart.In this minireview,recent progress in high-efficiency planar perovskite solar cells will be summarized.

Method of reverberation ray matrix for static analysis of planar framed structures composed of anisotropic Timoshenko beam members

Based on the method of reverberation ray matrix（MRRM）, a reverberation matrix for planar framed structures composed of anisotropic Timoshenko（T） beam members containing completely hinged joints is developed for static analysis of such structures.In the MRRM for dynamic analysis, amplitudes of arriving and departing waves for joints are chosen as unknown quantities. However, for the present case of static analysis, displacements and rotational angles at the ends of each beam member are directly considered as unknown quantities. The expressions for stiffness matrices for anisotropic beam members are developed. A corresponding reverberation matrix is derived analytically for exact and unified determination on the displacements and internal forces at both ends of each member and arbitrary cross sectional locations in the structure. Numerical examples are given and compared with the finite element method（FEM） results to validate the present model. The characteristic parameter analysis is performed to demonstrate accuracy of the present model with the T beam theory in contrast with errors in the usual model based on the Euler-Bernoulli（EB） beam theory. The resulting reverberation matrix can be used for exact calculation of anisotropic framed structures as well as for parameter analysis of geometrical and material properties of the framed structures.

ANALYSIS ON IMPACT RESPONSES OF UNRESTRAINED PLANAR FRAME STRUCTURE(Ⅱ)—NUMERICAL EXAMPLE ANALYSIS

By using the formula derived in Part （ Ⅰ ）, the instant response of an unrestrained planar frame structure subjected to the impact of a moving rigid-body are evaluated and analysed. The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated. The wave propagation phenomena of the longitudinal wave in the bars, the flexural and shear waves in the beams were also analysed. The numerical results show that the time duration of impact force is controlled by the flexural wave and the longitudinal wave ; the shear effect in beams should not be neglected in the impact response analysis of structures.

ANALYSIS ON IMPACT RESPONSES OF UNRESTRAINED PLANAR FRAME STRUCTURE(Ⅰ)—FORMULA DERIVATION

The generalized Fourier-series method was used to derive the impact responses formula of an unrestrained planar frame structure when subjected to an impact of a moving rigid-body. By using these formula, the analytic solutions of dynamic responses of the contact-impact system can be obtained. During the derivation, the momentum sum of elastic responses of the contact-impact system is demonstrated to be zero. From the derivation, it is seen that the modal method can also be used to solve this kind of impact problem.

Migration of paleo-uplift in southwestern Tarim Basin and its implications for orogenesis and reservoir development, NW China

Based on well horizon calibration,the typical seismic profiles in southwestern Tarim Basin were interpreted systematically,regional geological sections were established,and the regional denudation thickness of each tectonic period was restored.On this basis,the plane morphology maps of ancient structures of the Cambrian pre-salt dolomites in different periods were compiled,and the spatial distribution,development,evolution and migration of paleo-uplift in the late Early Paleozoic were analyzed.In the late Early Paleozoic,there existed a unified regional paleo-uplift widely distributed in southwestern Tarim Basin,which is called the southwestern Tarim plaeo-uplift.The“Tarim SW paleo-uplift”and“Hetian paleo-uplift”proposed in previous literatures are not independent,but the result of the spatio-temporal migration and evolution of the southwestern Tarim paleo-uplift identified in this paper.The southwestern Tarim paleo-uplift emerged at the end of Middle Ordovician,and took its initial shape with increased amplitude in the Late Ordovician.During the Silurian,the southwestern Tarim paleo-uplift rose steadily and expanded rapidly to the east,incorporating Pishan-Hetian and other areas,with the structural high locating in the Pishan-Hetian area.During the Devonian,the southwestern Tarim paleo-uplift began to shrink gradually,to a limited range in the Pishan-Hetian area in the southern part of the basin.During the Carboniferous,the southwestern Tarim paleo-uplift became an underwater uplift,that is,the paleo-uplift gradually died out.The southwestern Tarim paleo-uplift belongs to the forebulge of the southwestern Tarim foreland basin in the late Early Paleozoic,and its formation and evolution are related to the early Paleozoic orogeny of the West Kunlun orogenic belt in the south of the Tarim Basin.The migration of the southwestern Tarim paleo-uplift from the northwestern part of the southwestern Tarim Basin to the Pishan-Hetian area indicates the early Paleozoic orogenic process of the West Kunlun orogenic belt,which started in the western section at the end of Middle Ordovician and extended from west to east in a“scissor”style.The migration and evolution of the southwestern Tarim paleo-uplift controlled the development of unconformities at the end of Middle Ordovician,the end of Late Ordovician,and the end of Middle Devonian,and the spatial distribution of dissolved fracture-cave reservoirs in weathered crust below the unconformities in the southwest of Tarim Basin.The migration of the structural high of the southwestern Tarim paleo-uplift also played an important role in controlling the development of dissolved fracture-cave reservoirs in weathered crust.

Modeling of Radiating Aperture Using the Iterative Method

We are interested in this work to electromagnetic leakage, for example the door of the microwave oven (or shielding of electronic functions working in the microwave band containing holes for ventilation circuit) which must be transparent (chain link) but the level of electromagnetic leakage issued by this device must not exceed certain standards. This work started with this article in which we are interested in a simple structure consisting of a multilayer structure incorporating a radiating aperture. We show in this paper mainly the interests of this study and the limitations of using these structures. Modeling of this device is provided by the wave concept iterative procedure (WCIP) which is simple to implement and is characterized by the fast execution method. The validation of our work is carried out by comparing our results with those calculated by the Ansoft HFSS software which shows a good agreement.

Planar-symmetry-breaking induced antisymmetric magnetoresistance in van der Waals ferromagnet Fe_(3)GeTe_(2)

Recently discovered magnetic van der Waals(vdW)materials provide an ideal platform to explore low-dimensional magnetism and spin transport.Its vdW interaction nature opens up unprecedented opportunities to build vertically stacked heterostructures with novel properties and functionalities.By engineering the planar structure as an alternative degree of freedom,herein we demonstrate an antisymmetric magnetoresistance(MR)in a vdW Fe_(3)GeTe_(2)flake with a step terrace that breaks the planar symmetry.This antisymmetric MR originates from a sign change of the anomalous Hall effect and the continuity of the current transport near the boundary of magnetic domains at the step edge.A repeatable domain wall due to the unsynchronized magnetization switching is responsible for this sign change.Such interpretation is supported by the observation of field-dependent domain switching,and the step thickness,temperature,and magnetic field orientation dependent MR.This work opens up new opportunities to encode magnetic information by controlling the planar domain structures in vdW magnets.

Subwavelength ripple formation on planar and nonplanar surfaces by femtosecond laser scanning

The self-formation of periodic subwavelength ripples by linear polarized femtosecond laser scanning planar and non-planar tungsten targets on the employed laser wavelength, scanning speed, and energy fluence are examined systematically. The results show that, for a certain laser wavelength, the scanning conditions have no obvious effect to the morphological features of grating structures in the threshold range of laser fluence. The spatial structured period of gratings can be self-consistently interpreted by recently presented physical model of surface two-plasmon resonance. The subwavelength structures on cylindrical surface would be a good method to realize unique surface functions on complex surface of micro-devices.