Finite Element Analysis on Plane Stress Crack Growth in a Power-Law Hardening Material

Aim To determine numerically the field characteristics in the vied at the tip of a place crack growing steadily in a power-law hardening material. Meteods. Methods on the Euler mode and small-scale yield assumption, the numerical results were given by nonlinear finite element analysis. Results The numerical results of the shape of the active plastic sone, the angular distribution of stresseses and Clack tip opening displacement (CTOD) in the vicinity at the hp of the steadily groWing CraCk are determined. Conclusion The comparison between the numerical results given by the present wort and those given by analytic asymptotic analysis shows that the present work reached a very high accuracy.

CRACK INITIATION AND STEADY PROPAGATION OF ELASTIC-PLASTIC MATERIALS IN PLANE STRESS CONDITION

The crack tip stress-strain fields of the elastic-plastic cracked specimens have been analyzed using finite element calculations.The crack initiation and steady propagation behaviours have also been investigated by means of slip line pattern etching technique and mechanical tests. The results show that there are HRR near field and distant field in the crack tip region,and the later depends on the specimen configuration.The crack initiation behaviour is controlled by a single parameter J.In contrast,the steady crack propagation is affected by the distant strain field and can not be described by single parameter only.

Analytic Study on a Plane Stress Tensile Crack in a Power-Law Hardening Material

Aim To construct an analytic solution for the asymptotic field near a tensile cracktip of power-law hardening material under Plane stress condition. Methods Constructing funtion method was used. Results The exact asymptotic field was found. Conclusion The exact analytic solution for the problem is available.

A NOVEL METHOD FOR EVALUATING PLANE STRESS DYNAMIC FRACTURE TOUGHNESS OF 0Cr18Ni10Ti STAINLESS STEEL WELDED JOINTS

A novel method was proposed for the evaluation of Mode I dynamic fracture toughness （DFT） under plane stress and small scale yielding conditions for welded joints of stainless steel （SS）, 0Cr18Ni10Ti. In a hybrid experimental-numerical approach, the experiments were carried out on the Hopkinson pressure bar apparatus, and three dimensional （3D） transient numerical simulations were performed by a finite element （FE） computer program. Macroscopical plastic deformation was observed at the loading and supporting points, on the specimens, after the test, which could cause a large error if omitted in the numerical simulation. Therefore, elustic-viscoplustic analysis was performed on the specimen by adopting the Johnson-Cook （J-C） model to describe the rate-dependent plastic flow behavior of the material. The material heterogeneity in the mismatched welded joints, induced by the difference in the base metal （BM） and the weld metal （WM） in yield stress, has also been taken into consideration by using the J-C models separately. Good accordance was obtained between the experimental and the computational results by the present approach. The relationship between plane stress DFT and loading rate was also obtained on the order of 108 MPa.m^1/2.s^-1.

Cylindrical cavity expansion responses in anisotropic unsaturated soils under plane stress condition

In this paper,an anisotropic critical state model for saturated soils was extended to unsaturated conditions by introducing suction into its yield function.Combining this model with soil-water characteristic curves related to porosity ratio was employed to characterize the coupled hydromechanical behavior of unsaturated anisotropic soil.Based on the plane stress condition,the problem of the cylindrical cavity expansion in unsaturated anisotropic soils was transformed into first-order differential equations using the Lagrangian description.The equations were solved as an initial value problem using the Runge-Kutta algorithm,which can reflect the soil-water retention behavior during cavity expansion.Parametric analyses were conducted to investigate the influences of overconsolidation ratio(OCR),suction,and degree of saturation on the expansion responses of a cylindrical cavity in unsaturated anisotropic soil under plane stress condition.The results show that the above factors have obvious influences on the cavity responses,and the plane strain solution tends to overestimate expansion pressure and degree of saturation but underestimates suction around the cavity compared to the proposed plane stress solution.The theoretical model proposed in this paper provides a reasonable and effective method for simulating pile installation and soil pressure gauge tests near the ground surface of the unsaturated soils.

The Plane Stress Crack-Tip Field for an Incompressible Rubber Material

The crack-tip field under plane stress condition for an incompressible rubbermaterial￣[1] is investigated by. the use of the fully nonlinear equilibrium theory. It isfound thai the crack-tip field is composed of two shrink sectors and one expansion se-ctor. At the crack-tip, stress and strain possess the singularity of R￣(-1) and R￣(-1n), respec-tively, (R is the distance to the crack-tip before deformation, n is the material const-ant). When the crack-tip is approached, the thickness of the sheet shrinks to zerowith the order of R￣(1.4n). The results obtained in this paper are consistent with that ob-tained in [8] when s→∞ .

Experimental Evaluation of Ductile Fracture of Sheet Metals under Plane Stress States

With the application of lightweight materials such as advanced high-strength steel and aluminum alloy in the automotive industry, it is necessary to quantitatively evaluate the ultimate deformation capacity of materials under various plane stress states for the digital simulation of these materials. Conventional Nakajima test can only provide three regular plane stress states, such as tension, plane strain tension and bulging, and FLC curve is affected by deformation path, mold lubrication and other variables. More importantly, Nakajima test cannot provide shear, tension shear, which are extremely important loading conditions in automobile collisions. Therefore, the research work of this paper focuses on the evaluation of the ultimate ductile fracture behavior of sheet metals under various conditions of plane stress states. The four variables Mohr-Coulomb model was established to study the ductile fracture of metal sheets under plane stress states. Beginning with the recorded minor and major strain distributing on the deformation area of uniaxial tension samples, Moving Regression Algorithm was deployed to reveal the inherent relationship among the key parameters involved in the M-C model, which also provided an experimental technique for monitoring the instantaneous changing of triaxiality over the whole loading period. Three or four typical types of uniaxial-loading specimens were well designed to determine the M-C curve. As a result, M-C curve and the transformed major stain vs. minor strain curve provide further information about the material arrest to the ductile fracture in the area of shear loading, in comparison with the conventional FLD test.

GENERAL FORM OF MATCHING EQUATION OF ELASTIC-PLASTIC FIELD NEAR CRACK LINE FOR MODE I CRACK UNDER PLANE STRESS CONDITION

Crack line field analysis method has become an independent method for crack elastic-plastic analysis, which greatly simplifies the complexity of crack elastic-plastic problems and overcomes the corresponding mathematical difficulty. With this method, the precise elastic-plastic solutions near crack lines for variety of crack problems can be obtained. But up to now all solutions obtained by this method were for different concrete problems, no general steps and no general form of matching equations near crack line are given out. With crack line analysis method, this paper proposes the general steps of elastic plastic analysis near crack line for mode I crack in elastic-perfectly plastic solids under plane stress condition, and in turn given out the solving process and result for a specific problem.

EXACT SOLUTIONS OF NEAR CRACK LINE FIELDS FOR MODE I CRACK UNDER PLANE STRESS CONDITION IN AN ELASTIC－PERFECTLY PLASTIC SOLID

The near crack line analysis method has been used in the present paper,The classical small scale yielding conditions have been completely abandoned in the analyses and one inappropriate matching condition used to be used at the elasticplastic boundary has been corrected.The reasonable solution of the plastic stresses near the crack line region has been established.By matching the plastic stresses with the exact elastic stresses at the elastic-plastic boundary,the plastic stresses the length of the plastic zone and the unit normal vector of the elastic-plastic boundary near the crock line region have been obtained for a mode I crack under uniaxial tension,as well as a mode I crack under biaxial tension,which shows that for both conditions the plastic stress componentsσy, and σsy.he length of the plastic zone and the unit normal vector of the elastic-plastic boundary are quite the same while the plastic stress σs is different.

On Plane Stress State and Stress Free Deformation of Thick Plate with FGM Interface under Thermal Loading

This paper demonstrates the plane stress state and the stress free thermo-elastic deformation of FGM thick plate under thermal loading.First,the Sneddon-Lockett theorem on the plane stress state in an isotropic infinite thick plate is generalized for a case of FGM problem in which all thermo-mechanical properties are optional functions of depth co-ordinate.The proof is based on application of the Iljushin thermo-elastic potential to displacement type system of equations that reduces it to the plane stress state problem.Then an existence of the purely thermal deformation is proved in two ways:first,it is shown that the unique solution fulfils conditions of simultaneous constant temperature and linear gradation of thermal expansion coefficient,second,proof is based directly on stress type system of equations which straightforwardly reduces to compatibility equations for purely thermal deformation if only stress field is homogeneous in domain and at boundary.Finally,couple examples of application to an engineering problem are presented.

Crack growth of plane stress state in hardening material

THE plane stress steady crack growth in power-law hardening materials is significant in theoretical research and practical application, especially in the application in aeronautic and aerospace industries. But people have not yet found any analytic solutions to it because of the mathematical difficulty of the problem.

Reflection of Plane Waves from a Free Surface of an Initially Stressed Transversely Isotropic Dissipative Medium

The governing equations of a transversely isotropic dissipative medium are solved analytically to obtain the speeds of plane waves. The appropriate solutions satisfy the required boundary conditions at the stress-free surface to obtain the expressions of the reflection coefficients of reflected quasi-P (qP) and quasi-SV (qSV) waves in closed form for the incidence of qP and qSV waves. A particular model is chosen for numerical computation of these reflection coefficients for a certain range of the angle of incidence. The numerical values of these reflection coefficients are shown graphically against the angle of incidence for different values of initial stress parameter. The impact of initial stress parameter on the reflection coefficients is observed significantly.

FEM solutions for plane stress mode-I and mode-II cracks in strain gradient plasticity

The strain gradient plasticity theory is used to investigate the crack-tip field in a power law hardening material. Numerical solutions are presented for plane-stress mode I and mode II cracks under small scale yielding conditions. A comparison is made with the existing asymptotic fields. It is found that the size of the dominance zone for the near-tip asymptotic field, recently obtained by Chen et al., is on the order 5% of the intrinsic material length I. Remote from the dominance zone, the computed stress field tends to be the classical HRR field. Within the plastic zone only force-stress dominated solution is found for either mode I or mode II crack.

High Order Asymptotic Field for Plane Stress Crack Problem

This paper presents an exact analysis for high order asymptotic field of theplane stress crack problem.It has been shown that the second order asymptotic field is notan independent eigen field and should be matched with the elastic strain term of the firstorder asymptotic field.The second order stress field ahead of the crack tip is quite smallcompared with the first order stress field.The stress field ahead of crack tip is character-ized by the HRR field.Hence the J integral can be used as a criterion for crack initiation.

ANISOTROPIC PLASTIC FIELDS AT A RAPIDLY PROPAGATING PLANE-STRESS CRACK-TIP

Under the condition that all the stress components at a crack-tip are the functions of 0 only, making use of the equations of steady-state motion. Hill anisotropic yield condition and stress-strain relations, we obtain the general solution of anisotropic plastic field at a rapidly propagating plane-stress crack-tip. Applying this general solution to four particular cases of anisotropy, the general solutions of these four particular cases are derived. Finally, we give the anisotropic plastic field at the rapidly propagating plane-stress mode I crack-tip in the case of X=Y=Z

SUPPLEMENTARY STUDY ON ANISOTROPIC PLASTIC STRESS FIELDS AT A STATIONARY PLANE-STRESS CRACK-TIP

Under the hypothesis that all the perfectly plastic stress components at a orach tip are the functions of θ only, making use of yield conditions and equilibrium equations. we derive the generally analytical expressions of the perfectly plastic stress field at a crack tip. Applying these generally analytical expressions to the concrete cracks, the analytical expressions of perfectly plastic stress fields at the tips of Mode Ⅰ Mode Ⅱ, Mode Ⅲ and Mixed Mode Ⅰ-Ⅱ cracks are obtained.

A SUPPLEMENTARY STUDY OF ANISOTROPIC PLASTIC FIELDS AT A RAPIDLY PROPAGATING PLANE－STRESS CRACK－TIP（I）

The results in Ref. [1] are not suitable for the cases of β≥2. For this reason, byusing the methods in Ref [1] and Ref [2], we derive the general expressions ofamsotropic plastic fields at a rapidly propagating plane-stress crack-tip for both thecases of β=2 and β>2 .

Reflection of Plane Waves from Free Surface of an Initially Stressed Rotating Orthotropic Dissipative Solid Half-Space

The governing equations of an initially stressed rotating orthotropic dissipative medium are solved analytically to obtain the velocity equation which indicates the existence of two quasi-planar waves. The appropriate particular solutions in the half-space satisfy the required boundary conditions at the stress-free surface to obtain the expressions of the reflec-tion coefficients of the reflected quasi-P (qP) and reflected quasi-SV (qSV) waves in closed form for the incidence of qP and qSV waves. A particular model is chosen for numerical computation of these reflection coefficients for a certain range of the angle of incidence. The numerical values of these reflection coefficients are shown graphically against the angle of incidence for different values of initial stress parameter and rotation parameter. The impact of initial stress and rotation parameters on the reflection coefficients is observed significantly.

THE EVALUATION OF STRESS INTENSITY FACTORS OF PLANE CRACK FOR ORTHOTROPIC PLATE WITH EQUAL PARAMETER BY F2LFEM

In this paper, the evaluation of stress intensity factor of plane crack problems for orthotropic plate of equal-parameter is investigated using a fractal two-level finite element method （F2LFEM）. The general solution of an orthotropic crack problem is obtained by assimilating the problem with isotropic crack problem, and is employed as the global interpolation function in F2LFEM. In the neighborhood of crack tip of the crack plate, the fractal geometry concept is introduced to achieve the similar meshes having similarity ratio less than one and generate an infinitesimal mesh so that the relationship between the stiffness matrices of two adjacent layers is equal. A large number of degrees of freedom around the crack tip are transformed to a small set of generalized coordinates. Numerical examples show that this method is efficient and accurate in evaluating the stress intensity factor （SIF）.

THE 3-D STRESS INTENSITY FACTOR FOR A HALF PLANE CRACK IN A TRANSVERSELY ISOTROPIC SOLID DUE TO THE MOTION OF LOADS ON THE CRACK FACES

Three-dimensional analysis of a half plane crack in a transversely isotropic solid is performed. The crack is subjected to a pair of normal point loads moving in a direction perpendicular to the crack edge on its faces. Transform methods are used to reduce the boundary value problem to a single integral equation that can be solved by the Wiener-Hopf technique. The Cagniard-de Hoop method is employed to invert the transforms. An exact expression is derived for the mode I stress intensity factor as a function of time and position along the crack edge. Some features of the solution are discussed through numerical results.