Procion MX Dyes在彩色蜡染制作工艺中的应用研究

文章以彩色蜡染制作工艺为研究对象,将文献研究法与实践相结合,从画蜡技巧、上色与固色原理、艺术表现技巧等方面解读Procion MX Dyes在彩色蜡染制作工艺中的应用原则和技巧。借助Procion MX Dyes的应用,提升了彩色蜡染的艺术表现力和使用价值,为蜡染产业的发展提供了可行性参考。

Bioremediation of Textile Azo Dyes Amido Black 10B, Reactive Black 5, Reactive Blue 160 by Lentinus squarrosulus AF5 and Assessment of Toxicity of the Degraded Metabolites

Bioremediation is an eco-compatible and economical approach to counter textile dye menace. The isolated Lentinus squarrosulus AF5 was assessed for decolourization of textile azo dyes, and had shown ~93%, 88% and 70% decolorization of Reactive blue 160 (RB160), Reactive black 5 (RB5) and Amido black 10B (AB10B) respectively. Further analysis using UV-vis, HPLC, and FTIR, 1H NMR had shown the degradation of the dyes. Toxicity analysis of the metabolites was performed using seed germination and plant growth on two agriculturally important plants Guar (Cyamopsis tetragonoloba) and wheat (Triticum aestivum) as well as cytotoxicity analysis using the human keratinocyte cell line (HaCaT). The dye mix appeared inhibitory for seed germination (20% - 40%), whereas metabolites were non-inhibitory for germination. Treatment of HaCaT cells with of dye mix and metabolites led into 45% and ~100% of cell viability of HaCaT cells respectively. Therefore, metabolites following degradation of the dye mix were observed to be non-toxic.

Tannins from Acacia mangium Bark as Natural Dyes for Textiles:Characteristics and Applications

Tannins are capable of producing natural dyes with antioxidant and antibacterial propertis,while synthetic dyes are commonly used in the textile industry,causing environmental issues like water pollution.This research aims to utilize waste tannins as natural dyes as an alternative to synthetic dyes.This study examined the effect of the extraction method on tannin properties such as phenolic content,antioxidants,and antibacterial activity.In addition,Pyrolysis Gas Chromatography‒Mass Spectrometry(Py-GCMS)analysis was used to identify the effect of extraction temperature on the chemical elucidation of tannin.The effect of tannin concentration was evaluated against four bacteria that are usually found on human skin:Staphylococcus epidermidis,Bacillus subtilis,Propionibacterium acnes,and Staphylococcus aureus.Extraction temperature significantly influences the chemical composition of tannin,which leads to different antioxidant properties.The maximum antibacterial properties of tannin were obtained at 90℃with the inhibition zone in the range of 0.9–1.0 mm against four bacteria,tannin yield of 26.59%,Gallic Acid Equivalents or total phenolic content(GAE)of 40.30 mg/g,and Radical Scavenging Activity or antioxidant activity(RSA)of 89.88%.Moreover,the concentration of tannin was significantly linear with its antibacterial properties.Tannin was successfully applied to the textile by using alum as a mordanting agent to create an antibacterial textile.The textile’s bacterial structure damage was analyzed under Field Emission Scanning Electron Microscopy(FESEM).After 50 washings,tannin-textiles with alum-modified properties remained stable compared to those without alum,with S.aureus and S.epidermidis being the most vulnerable bacteria,as confirmed by FESEM images.Hence,tannin is a feasible alternative to harmful and nondegradable synthetic dyes and antibacterial agents.

Biocatalytic enhancement of laccase immobilized on ZnFe_(2)O_(4) nanoparticles and its application for degradation of textile dyes

Efficient and convenient treatment of industrial dyeing wastewater is of great significance to guarantee human and animal health.This work presented the enhanced catalytic activity at pH 3.0 of laccase immobilized on amino-functionalized ZnFe_(2)O_(4) nanoparticles(ZnFe_(2)O_(4)-laccase)and its application for the degradation of textile dyes.Due to the existence of a large number of oxygen vacancies on the surface of the ZnFe_(2)O_(4) nanoparticles,negative ions accumulated on the magnetic carriers,which resulted in a harsh optimal pH value of the ZnFe_(2)O_(4)-laccase.Laccase activity assays revealed that the ZnFe_(2)O_(4)-laccase possessed superior pH and thermal stabilities,excellent reusability,and noticeable organic solvent tolerance.Meanwhile,the ZnFe_(2)O_(4) laccase presented efficient and sustainable degradation of high concentrations of textile dyes.The initial decoloration efficiencies of malachite green(MG),brilliant green(BG),azophloxine,crystal violet(CV),reactive blue 19(RB19),and procion red MX-5B were approximately 99.1%,95.0%,93.3%,87.4%,86.1%,and 85.3%,respectively.After 10 consecutive reuses,the degradation rates of the textile dyes still maintained about 98.2%,92.5%,83.2%,81.5%,79.8%and 65.9%,respectively.The excellent dye degradation properties indicate that the ZnFe_(2)O_(4)-laccase has a technical application in high concentrations of dyestuff treatment.

Plant-based vaccines against viral hepatitis: A panoptic review

The traditional vaccines against hepatitis have been instrumental in reducing the incidence of some types of viral hepatitis;however,the need for cost-effective,easily distributable,and needle-free vaccine alternatives has led to the exploration of plant-based vaccines.Plant-based techniques offer a promising avenue for producing viral hepatitis vaccines due to their low-cost cultivation,scalability,and the potential for oral administration.This review highlights the successful expression of hepatitis B surface antigens in plants and the subsequent formation of virus-like particles,which have shown immunogenicity in preclinical and clinical trials.The challenges such as achieving sufficient antigen expression levels,ensuring consistent dosing,and navigating regulatory frameworks,are addressed.The review considers the potential of plant-based vaccines to meet the demands of rapid vaccine deployment in response to outbreaks and their role in global immunization strategies,particularly in resource-limited settings.This review underscores the significant strides made in plant molecular farming and the potential of plant-based vaccines to complement existing immunization methods against viral hepatitis.

Construction of direct-Z-scheme heterojunction photocatalyst of g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)composite and its degradation behavior for dyes of Rhodamine B

Direct-Z-scheme g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)photocatalyst with giant internal electric field was prepared by onestep aqueous sonication self-assembly method using g-C_(3)N_(4)and MXene of Ti_(3)C_(2)as the source materials.The chemical composition and structure of the catalysts was characterized by FT-IR,XRD,SEM,TEM,and XPS.The XPS characterization indicated that Ti_(3)C_(2)was partially oxidized to TiO_(2)during the composite process.As a result,an efficient direct-Z-scheme heterojunction structure consisting of the g-C_(3)N_(4)and TiO_(2)with Ti_(3)C_(2)as an electron bridge was constructed.The photocatalytic performance of the prepared catalysts was evaluated by degrading the Rhodamine B(RhB)wastewater.Compared with the single g-C_(3)N_(4),the g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)composite photocatalyst exhibited efficient and stable photocatalytic degradation ability,with a degradation efficiency as high as 99.2%for RhB under optimal conditions(2%Ti_(3)C_(2),pH=3).The high degradation performance of g-C_(3)N_(4)/Ti_(3)C_(2)/TiO_(2)for RhB was attributed to the combination of Ti_(3)C_(2),TiO_(2),and g-C_(3)N_(4)components,forming a direct-Z-scheme heterojunction with a high-speed electron transport channel structure.The role of Z-scheme heterojunctions in electron transport is verified by photoelectrochemical characterization,along with photoluminescence(PL).Our research provides a simple method to design photocatalysts by constructing direct-Z-scheme electron transport channels for highly efficient treatment of dye wastewater.

Rational design of photofunctional dyes BODIPYs/aza-BODIPYs and applications for photocatalysis, photoelectric conversion and thermochromic materials

4,4-Difluoro-4-bora-3a,4a-diaza-sindacene (BODIPY) is a sort of photofunctional dye which possesses advantages including strong light-capturing property, high photon-resistance, etc. Meso-N substituted aza-BODIPY is a crucial derivative of BODIPY scaffold that has the favorable optical properties and a significant spectral redshift. The photophysical properties can be tuned by molecular design, and the attenuation path of the excited state energy release of absorbed light energy can be well controlled via structural modifications, enabling tailored application. It has been extensively employed in life medicine fields including fluorescence imaging diagnosis, photodynamic therapy photosensitizer and photothermal therapy reagent and so forth. Extensive research and review have been performed in these areas. However, BODIPYs/aza-BODIPYs have a significant role in energy, catalysis, optoelectronics, photo-responsive materials and other fields. Nevertheless, there are relatively few studies and reviews in these fields on the modification and application based on BODIPY/aza-BODIPY scaffold. Herein, in this review we summarized the application of BODIPY/aza-BODIPY in the aforementioned fields, with the molecular regulation of dye as the foundation and the utilization in the above fields as the objective, in the intention of providing inspiration for the exploration of innovative BODIPY/aza-BODIPY research in the field of light resource conversion and functional materials.

Photocatalytic Degradation of Water-Soluble Dyes by LaCoO_3

Pervoskite type oxides LaCoO 3 was prepared by citrate method with the granula of 20 nm-30 nm. With a fluorescent Hg lamp or sunlight as irradiator, the degradation experiments of various water soluble dyes were carried out in the suspension system of LaCoO 3 . The results show that the pervoskite type oxide LaCoO 3 has good photocatalytic activity.Studied by X ray photoelectron spectroscopy and photoacoustic spectra, its photocatalytic activity is found to be related with factors such as the d electron structure of ion Co 3+ ,Co—O binding energy and adsorbed oxygen on the surface etc.

Construction of Plant-based Expression Vector of Polyphosphate Kinase Gene

[Objective] The aim was to construct the fusion expression vector of polyphosphate kinase（PPK） and green fluorescent protein（GFP） genes.[Method] In this study,the primers were designed based on PPK gene sequence（L03719） of E.coli DH5α in Genbank.Genomic DNA of E.coli DH 5α was extracted as template for the amplification of PPK gene by PCR method.By using In-Fusion@ HD Cloning Kit,the PPK gene was directionally cloned into NcoI site of the pCAMBIA1302 vector.[Result] Sequencing results showed that the 2.0 kb long fragment of PPK gene was inserted into the plant-based expression vector pCAMBIA1302 in front of GFP gene.[Conclusion] The fusion expression vector of PPK and GFP genes were successfully constructed.

Dyestret阳离子改性剂对亚麻的作用

以 Dyestret 阳离子改性剂对亚麻织物进行阳离子改性,用活性染料对改性后的亚麻织物染色,研究改性温度、pH和时间对织物染色固色率的影响,寻找出亚麻织物改性的最佳条件:温度60℃,时间30min,pH=10～11。可实现提高染料固色率和降低染料废水含量的目的。

Application of Microwave Technology in Cotton Fabric Dyeing with Reactive Dyes

The influence of different factors on dyeing depth was explored when the cotton fabric was dyed with KN reactive dyes by microwave radiation,and the rubbing fastness and soaping fastness of the fabrics by conventional dyeing and microwave dyeing are determined.In addition,we also researched the effects of microwave heating on the dyeing properties of different dyes.The results show that: the dyeing time of cotton fabric by microwave heating can be greatly shortened,and the dyeing performance is similar to conventional dyeing process.

Decolorization of reactive dyes by laccase immobilized in alginate/gelatin blent with PEG

To achieve effective decolorization of reactive dyes,laccase immobilization was investigated.Laccase 0.2%(m/V)(Denilite IIS) was trapped in beads of alginate/gelatin blent with polyethylene glycol(PEG),and then the supporters were activated by cross-linking with glutaraldehyde.The results of repeated batch decolorization showed that gelatin and appropriate concentration of glutaraldehyde accelerated the decolorization of Reactive Red B-3BF(RRB);PEG had a positive effect on enzyme stability and led to an inc...

Chitosan and chemically modified chitosan beads for acid dyes sorption

The capabilities of chitosan and chitosan-EGDE （ethylene glycol diglycidyl ether） beads for removing Acid Red 37 （AR 37） and Acid Blue 25 （AB 25） from aqueous solution were examined. Chitosan beads were cross-linked with EGDE to enhance its chemical resistance and mechanical strength. Experiments were performed as a function ofpH, agitation period and concentration of AR 37 and AB 25. It was shown that the adsorption capacities of chitosan for both acid dyes were comparatively higher than those of chitosan- EGDE. This is mainly because cross-linking using EGDE reduces the major adsorption sites -NH3＋ on chitosan. Langmuir isotherm model showed the best conformity compared to Freundlich and BET. The kinetic experimental data agreed very well to the pseudo second-order kinetic model. The desorption study revealed that after three cycles of adsorption and desorption by NaOH and HCl, both adsorbents retained their promising adsorption abilities. FT-IR analysis proved that the adsorption of acid dyes onto chitosan-based adsorbents was a physical adsorption. Results also showed that chitosan and chitosan-EGDE beads were favourable adsorbers and could be employed as low-cost alternatives for the removal of acid dyes in wastewater treatment.

Isolation and characterization of Pseudomonas otitidis WL-13 and its capacity to decolorize triphenylmethane dyes

Pseudomonas otitidis WL-13, which has a high capacity to decolorize triphenylmethane dyes, was isolated from activated sludge obtained from a wastewater treatment plant of a dyeing industry. This strain exhibited a remarkable color-removal capability when tested against several triphenylmethane dyes under both shaking and static conditions at high concentrations of dyes. More than 95% of Malachite Green and Brilliant Green was removed within 12 h at 500 μmol/L dye concentration under shaking conditions. Crystal Violet lost about 13% of its color under the same conditions tested. The rate of decolorization increased when the M9 medium was supplemented with yeast extract. The optimum pH and temperature for color removal were 7-9 and 35-40℃, respectively. The observed changes in the visible spectra and the inspection of bacterial growth indicated the color-removal by the adsorption of dye to the cells during incubation with strains.

Preparation of activated carbon from cattail and its application for dyes removal

Activated carbon was prepared from cattail by H3PO4 activation. The effects influencing the surface area of the resulting activated carbon followed the sequence of activated temperature 〉 activated time 〉 impregnation ratio 〉 impregnation time. The optimum condition was found at an impregnation ratio of 2.5, an impregnation time of 9 hr, an activated temperature of 500℃, and an activated time of 80 min. The Brunauer-Emmett-Teller surface area and average pore size of the activated carbon were 1279 m^2/g and 5.585 nm, respectively. A heterogeneous structure in terms of both size and shape was highly developed and widely distributed on the carbon surface. Some groups containing oxygen and phosphorus were formed, and the carboxyl group was the major oxygen-containing functional group. An isotherm equilibrium study was carried out to investigate the adsorption capacity of the activated carbon. The data fit the Langmuir isotherm equation, with maximum monolayer adsorption capacities of 192.30 mg/g for Neutral Red and 196.08 mg/g for Malachite Green. Dye-exhausted carbon could be regenerated effectively by thermal treatment. The results indicated that cattail-derived activated carbon was a promising adsorbent for the removal of cationic dyes from aqueous solutions.

Influence of particle size and salinity on adsorption of basic dyes by agricultural waste: dried Seagrape (Caulerpa lentillifera)

Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.

Fenton Reagent Generated in Electrolysis Cell and Its Usage in Degradation and Decolorization of Dyes

The Electro-chemistry process to produce Fenton reagents has been described. The in situ oxidation of dyes, acid chrome and alizarin red(Fenton reagents) with electrogenerated hydroxyl radicals was investigated. The \{ I-V \} cyclic voltammograms were measured. The redox peaks of the dyes were not observed in the treated dye solutions instead of a couple of O_2/H_2O_2 redox peaks. The IR results indicate that acid chrome dye was decomposed into naphthylamine and phenol aminophenol sulfonic acid. The degradation and the decolorization of the dyes were comfirmed by the visible spectrum and the chemical analysis. The COD_ cr removing rate was close to 80%.

Comparison of four supports for adsorption of reactive dyes by immobilized Aspergillus fumigatus beads

Four materials, sodium carboxymethylcellulose （Na-CMC）, sodium alginate （SA）, polyvinyl alcohol （PVA）, and chitosan （CTS）, were prepared as supports for entrapping fungus Aspergillusfumigatus. The adsorption of synthetic dyes, Reactive Brilliant Blue KN- R, and Reactive Brilliant Red K-2BP, by these immobilized gel beads and plain gel beads was evaluated. The adsorption efficiencies of Reactive Brilliant Red K-2BP and Reactive Brilliant Blue KN-R by CTS immobilized beads were 89.1% and 93.5% in 12 h, respectively. The adsorption efficiency by Na-CMC immobilized beads was slightly lower than that of mycelial pellets. But the dye culture mediums were almost completely decolorized in 48 h using the above-mentioned two immobilized beads （exceeding 95%）. The adsorption efficiency by SA immobilized beads exceeded 92% in 48 h. PVA-SA immobilized beads showed the lowest adsorption efficiency, which was 79.8% for Reactive Brilliant Red K-2BP and 92.5% for Reactive Brilliant Blue KN-R in 48 h. Comparing the adsorption efficiency by plain gel beads, Na-CMC plain gel beads ranked next to CTS ones. SA and PVA-SA plain gel beads hardly had the ability of adsorbing dyes. Subsequently, the growth of mycelia in Na-CMC and SA immobilized beads were evaluated. The biomass increased continuously in 72 h. The adsorption capacity of Reactive Brilliant Red K-2BP and Reactive Brilliant Blue KN-R by Na-CMC immobilized beads was 78.0 and 86.7 mg/g, respectively. The SEM micrographs show that the surface structure of Na-CMC immobilized bead is loose and finely porous, which facilitates diffusion of the dyes.

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.

Dyes with high affinity for polylactide

Attempts were made to develop dyes with high affinity for polylactide as an alternative to the existent commercial disperse dyes. The dyes synthesized according to the affinity concept of dye to polylactide exhibited excellent dyeing properties on polylactide compared with the commercial disperse dyes.