Differential Expression of Genes Related to Fruit Development and Capsaicinoids Synthesis in Habanero Pepper Plants Grown in Contrasting Soil Types

Habanero pepper(Capsicum chinense Jacq.)is a crop of economic relevance in the Peninsula of Yucatan.Its fruits have a high level of capsaicinoids compared to peppers grown in other regions of the world,which gives them industrial importance.Soil is an important factor that affects pepper development,nutritional quality,and capsaicinoid content.However,the effect of soil type on fruit development and capsaicinoid metabolism has been little understood.This work aimed to compare the effect of soils with contrasting characteristics,black soil(BS)and red soil(RS),on the expression of genes related to the development of fruits,and capsaicinoid synthesis using a transcriptomic analysis of the habanero pepper fruits.Plants growing in RS had bigger fruits and higher expression of genes related to floral development,fruit abscission,and softening which suggests that RS stimulates fruit development from early stages until maturation stages.Fruits from plants growing in BS had enrichment in metabolic pathways related to growth,sugars,and photosynthesis.Besides,these fruits had higher capsaicinoid accumulation at 25 days post-anthesis,and higher expression of genes related to the branched-chain amino acids metabolism(ketol-acid reductisomerase KARI),pentose phosphate pathway and production of NADPH(glucose-6-phosphate-1-dehydrogenase G6PDH),and proteasome and vesicular traffic in cells(26S proteasome regulatory subunit T4 RPT4),which suggest that BS is better in the early stimulation of pathways related to the nutritional quality and capsaicinoid metabolism in the fruits.

Study on a Bowl-based Mechanism for Transplanting Potted Strawberry Seedlings

To improve the efficiency of fetching and transplanting seedlings for the mechanization of strawberry planting,an integrated transplanting mechanism was designed with protruding,fetching and planting performance to achieve rapid fetching and pushing bowl movements.According to the working principle of the slewing mechanism,a kinematics model and the optimization goal were established,respectively.Based on visual auxiliary analysis software,optimal parameters were obtained.A three-dimensional model was established to obtain a simulation trajectory by means of a virtual simulation design analysis.Three-dimensional printing technology was used to manufacture the test prototype,and the actual working trajectories of the test prototype were extracted using high-speed photography technology,which verified the consistency of the actual trajectory with the theoretical and simulated trajectories.A prototype transplanting experiment was performed with the success rate of seedling extraction of 91.2%and excellent planting rate of 82.8%,which met the requirements for integrated strawberry harvesting,planting and transplanting.The experimental results verified the correctness and feasibility of the design of integrated transplanting mechanism.

Physiological and psychological responses to tended plant communities with varying color characteristics

Exposure to plants has been reported to promote health and reduce stress,and plant color has direct impacts on physical and mental health.We used images of common types of tended plant communities in Shenyang,China,with combinations of yellow,green,and red foliage,as experimental stimuli.A total of 27 images were used as visual stimuli.We used electroencephalography to measureαwave activity(8-13 Hz)in 40 subjects while they viewed visual stimuli.These data were combined with subjective questionnaire data to analyze the relaxing effect of images of tended plant communities with different color types and proportions on people.The results revealed that,although there were slight differences between the electroencephalography and psychological findings,women were significantly more relaxed than men after viewing the images.Physiological and psychological responses varied with the types and proportions of colors in the tended plant communities:those of foliage with combinations of two or three colors induced stronger responses than images with a single color.Specifically,(1)for one-color plant communities,green or yellow plant communities induced a stronger relaxation effect than red plant communities;(2)for two-color plant communities,the optimal color proportion was 55%+45%,and the green+yellow and green+red color combinations induced a stronger relaxation effect;(3)for three-color plant communities,the relaxation effect was strongest when the color proportion was 55%green+25%yellow+20%red.These data would provide a plant color matching in future plant landscape design,which may be helpful for creating healthy and relaxing environments.

Studies on Rubber (<i>Hevea brasiliensis</i>) Trees Exist Plant Type after Planting and Available Tapping Tree of Rubber Plantation in China

Existing plant types of rubber tree after planting and available tapping tree were investigated, and there were about 28 rubber plantations with different tapping years of 8 varieties “CATAS7-33-97”, “CATAS8-79”, “CATAS7-20-59”, “PR107”, “RRIM600”, “GT1”, “INA873”, “93-114”in South China. The results showed that there were six kinds of existing plant types of rubber tree after planting of rubber plantations, which were available tapping trees, wind damaged trees, cold damaged trees, tapping panel dryness trees, absent trees and weak trees, respectively. These data investigated also showed rubber trees under available tapping, stoppage due to tapping panel dryness, absence, wind damage, cold damage and weakness were counted and calculated and made up for 72.21%, 14.75%, 5.61%, 3.86%, 2.68% and 1.89%. Tapping panel dryness trees, wind damage and absent trees are major factors for the loss of tapping rubber trees in the rubber plantations. Of these investigated varieties, available tapping trees per 100 trees of rubber plantation of “PR107”at the 1st, 12th, 14th, 16th, 20th, 24th tapping year were 96, 67, 70, 75, 66, 46 trees in Hainan planting zone, respectively. Available tapping trees per 100 trees of rubber plantation of “RRIM600”at the 9th, 15th, 20th, 22nd tapping year were 88, 62, 55, 36 trees in Yunnan planting zone, respectively. Available tapping trees per 100 trees of rubber plantation of “93-114” at the 10th, 19th, tapping year were 94, 62 trees in Guangdong planting zone. These results showed that available tapping trees of rubber plantation decreased with increasing tapping age under different planting zones in China.

Determination of Optimum Seed Rate of Hybrid Rice (Oryza sativa L.) Varieties in Mat-Type Seedling Raising for Mechanical Transplanting

Rice is the most important and crucial to ensuring food and dietary energy security in most developing countries and is the staple food of more than half of the world’s population. This study was conducted to identify the seed rate of hybrid rice varieties for mechanical transplanting during Boro (irrigated dry season), 2021-22 season at BRRI research field, Gazipur. Slender grain type BRRI hybrid dhan3, BRRI hybrid dhan5, Ishpahani hybrid dhan6, and BRRI dhan89 were used in the study. The same growth medium was used to establish mat-type seedlings on plastic trays (280 × 80 × 25 mm) at seed rates of 80, 90, 100, 110, and 120 g∙tray−1. Walk-behind type 04 rows rice transplanter (Daedong, model-DP 488) was used during transplanting in the field at the set of the plant to plant spacing of 140 mm while line-to-line spacing was fixed to 300 mm. The result depicted that regardless of the variety, seedling density increased linearly as seed rate increased, except for the 21 days following sowing. However, the seedling density of BRRI dhan89 decreased after the seed rate of 100 g∙tray−1 due to mortality. The seedling height of the BRRI hybrids dhan5 and Ishpahani hybrid dhan6 was significantly higher than that of the BRRI hybrid dhan3 and BRRI dhan89. After 21 days, the seedling height decreased significantly with the increase in seed rate. For the seed rates of 100, 110, and 120 g∙tray−1, identical numbers of hills per unit area and plants per hill were observed. On the other hand, regardless of the variety, the percentage of missing hills considerably decreased with the increased seed rate. The yield of the BRRI hybrid dhan5 variety was significantly higher at the seed rates of 100 and 110 g∙tray−1, although the yield of the Ishpahani hybrid dhan6 variety was comparable. In terms of yield among the four varieties, BRRI hybrid dhan5 gave a higher yield followed by Ishpahani hybrid dhan6 while BRRI dhan89 gave a lower yield compared to the hybrid varieties irrespective of the seed rate. However, a seed rate of 110 g∙tray−1 gave a significantly higher yield followed by 120 g∙tray−1 while 80 and 90 g∙tray−1 gave lower grain yield. Generally, mat type seedling of inbred rice varieties is used in Bangladesh. The determination of seed rate of hybrid rice varieties may be increased by the use of rice transplanter in mechanical transplanting of hybrid rice varieties reducing the seed loss and increasing the grain yield.

Comparative Analysis on Rice Plant Type of Two Super Hybrids and Shanyou63

The characteristics of plant type and physiological indices for photosynthesis were analyzed using two super hybrid rices, Liangyoupeijiu and LiangyouE32 as materials, and an indica hybrid, Shan-you63 as a control. Based on the present analysis and various theories and breeding practices on rice plant type, a model of plant ideotype for super hybrid rice (indica) in the lower reaches of Yangtze River Valley was proposed. This was: a length of 35 - 40 cm for top leaf with a width of 2 cm, and that of 50 - 55 cm and 55-60 cm, respectively, for the second and third leaves from top, meanwhile, having a leaf angle of 5°, 10°and 15° respectively, and a curvature of 1 - 1. 5 cm-1for the leaf face at heading stage; the uppermost three leaves keeping their activities for as long as 70 d, which could lead a LAI of 3 at full ripeness; loose plant type with thin (SLW=2.5-3 g cm-2, dry weight) and curve-slant leaves during early growing stage, and compact plant type by thick (SLW=4 - 5 g cm-2) and erect leaves during the middle and late growing stages; with a coefficient of light extinction of 0. 3 - 0. 4, which allowed for an optimal LAI high of 8-10 during the middle growth period; plant height of 110-120 cm, with 2 - 4 cm basal internode and a long uppermost internode occupying 45% of total stem length; 25 - 28 cm panicle with 8-10 spikelets per centimeter showing bend-type in ripening; a rich chlorophyll which led to a high net photosynthetic rate, and tolerance to light shading and photooxidation which is of benefit to increasing the adaptability to varying light conditions.

Genetical and Physiological Basis of Plant Type Model of Erect and Large Panicle Japonica Super Rice in Northern China

The historical changes in rice yields across China were explored. The physiological mechanisms and genetic basis of the erect and large panicle super-high-yield plant type model for breeding japonica super rice were analyzed mainly on the panicle type, number of large vascular bundles （LVB） in the panicle neck, and the panicle type index （PTI）. In the production point of view, we suggested that, for the breeding of super-high-yield japonica rice, the erect panicle types with more LVB numbers in the panicle neck and superior upper grains in the secondary branches would be the key factors. The information has potential significance in the rice breeding and productivity not only in China but also throughout the rice production areas of the world.

Source-sink Characteristics and the Translocation of Assi- milates in New Plant Type and Intersubspecific Hybrid Rice

Both new plant type (NPT) and intersubspecific hybrid rice (IHR) had large sink size (total number of spikelets per m2), however, poor grain filling limited their potential in the grain yield. Compared to the three-line indica hybrid of Shanyou 63 (CK), NPT and IHR showed higher photosynthetic potential, higher dry matter accumulation and higher ratio of dry weight to spikelets (total dry wt./total number of spikelets) from heading to harvest. But both exhibited a low export percentage and transfer ratio of assimilates, low partitioning of 14C to grains from labeled flag leaves, low harvest indices and low physiological activities (IAA content and activities of ATPase and starch synthase) of grains at early grain-filling stage. The physiological activities of grains at early filling stage were significantly correlated with the export percentage and transfer ratio of assimilates, ripened-grain percentage and grain plumpness (r = 0.85 - 0.95). The source-sink ratio (dry matter wt./spikelet and nonstructural carbohydrate/spikelet) at heading was positively correlated with physiological activities of grains (r = 0. 84 - 0. 97 ). It is suggested that low physiological activities of grains at early filling stage is attributed to low source-sink ratio at heading, and the low sink activity weakens the ability to remobilize assimilates into grains, and leads to poor grain filling in NPT and IHR.

Plant Type and Its Effects on Canopy Structure at Heading Stage in Various Ecological Areas for a Two-line Hybrid Rice Combination,Liangyoupeijiu

A two-line hybrid rice combination, Liangyoupeijiu, was used to estimate several factors of plant type, and environmental models for these factors at the heading stage were established using the data of eight ecological experimental sites in 2006 and 2007. According to climatic data from 1951 to 2005, the differences in those factors and their effects on plant canopy were analyzed for four rice cropping areas in China, including South China, the middle-lower reaches of the Yangtze River, Sichuan Basin, and river valley in Yunnan, China. The thickness of leaf layer （the distance from pulvinus of the third leaf from the top to the tip of flag leaf） and distribution of leaf area could be used as candidate indices for the plant type of a rice canopy.

Female Plant Types of Ginkgo biloba L. in China

Ginkgo biloba is a dioecious and unique species within Ginkgo family and Ginkgo genus, but it shows a big variability. From 1950s, resources of female plants in China were investigated and collected, and the seed anatomical structure and morphological characters at different development stages were observed. According to the shape, length, width and thickness of ovule bracket and seed stone, as well as the characteristics of both sides and top of the stone, the female plants of Ginkgo biloba have been divided into five types, long-stone, Buddha-finger, horse-bell, mume-stone and round-stone. In addition, the important cultivars belonging to different types were also determined. The stone weight, index of stone shape, and contents of dry matter, amylose, amylopectin, starch, rough protein, soluble sugar and hydrocyanic acid in seed kernel of each type were measured, and the qualities of seed stone were appraised, which lays a foundation for the improvement and utilization of female plant resources in Ginkgo biloba.

Inheritance of Several Plant Type Characters in Truss Tomato

Plant type characters of truss tomato were studied for exploring the inheritance of leaf angle, and providing a theoretical basis for breeding truss tomato cultivars in compact plant type. Participant truss tomato inbred lines were involved in the cross and backcross for multi-generations, and the mixed major genes plus polygene inheritance model was employed to analyze the inheritance model of leaf angle, plant width, and leaf drooping value. The inheritance of leaf angle and plant width was controlled by one pair of additive major genes plus additive-dominant polygene （D-2）. The additive effect of the major genes controlling leaf angle was 6.51, the additive effect of the polygene was 15.01, the potential ratio was 0.914, and the dominant degree was 0; the heritability of the major genes was 45.61% in B1 generation, 37.29% in B2 generation, and 47.71% in F2 generation. The additive effect of the major genes controlling plant width was 3.08, while the additive effect and dominant effect of the polygene were 3.58 and -1.59, respectively, with the potential ratio of -0.44 and 0 dominant degree; the heritability of the major genes was 23.30% in B1 generation, 20.73% in B2 generation, and 36.11% in F2 generation; leaf-drooping-value trait was controlled by one pair of negative complete dominant major genes plus additive-dominant polygene （D-4）. The additive effect of the major genes was 8.18, the dominant effect was -8.18, the additive effect in the polygene was 3.12, the dominant effect was 19.07, the potential ratio was 6.09, and the dominant degree was -1; the heritability of the polygene was 69.15% in B1 generation, 68.5% in B2 generation, and 49.57% in F2 generation. The improvement on leaf angle and plant width of 173×101 should be focused on the major genes and the selection should be made in early generations, while the improvement on leaf-drooping-value of 173×01 should be made in late generations.

Analysis and Simulation of Plant Type on Canopy Structure and Radiation Transmission in Rice

Three typical hybrid rice cultivars, together with three artificially modified plant types by the application of N fertilizer during the elongation of the two uppermost leaves were used to analyze how the plant type affected the layered leaf area and radiation transmission. Plant type factors, layered leaf area and radiation distribution were measured at the full heading, 10 d and 25 d after full heading stages, respectively. A model for calculating the layered leaf area from plant type factors was established and validated to determine the effects of plant type factors on the layered leaf area for the three hybrids. Furthermore, the relationship between layered leaf area and radiation transmission was established by using the radiation transmission model. The effects of the plant type factors on the radiation transmission for the three hybrids were evaluated by using this model. Finally, a method was established to describe the canopy structure, such as the layered leaf area index and the radiation distribution in the rice canopy.

Development of SA-533 Type B CL. 1+SA-240 Type 304L roll-bonded clad steel plate for safety injection tank of CAP1400 nuclear power plant

Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.

Relationship Between Plant Type and Grain Quality of Japonica Hybrid Rice in Northern China

Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was studied with 100 crosses derived from 10 sterile lines × 10 restorer lines. There was a complex relationship between parts of the traits of the two aspects. The angle of the 2nd leaf from the top and single panicle weight played important roles in plant type system and amylose content and grain length in grain quality system. The angle of the 2nd leaf from the top, plant height and single panicle weight had a great effect on grain quality traits, and amylose content, brown rice rate and translucency were easily influenced by plant type traits. Selection index model indicated that japonica hybrid rice in Northern China with good quality was characterized by broad flag leaf and 2nd leaf from the top, narrow and short 3rd leaf from the top, low plant height, short culm, long and more panicles and low single panicle weight.

Effects of Plant Community Type on Soil Methane Flux in Semiarid Loess Hilly Region,Central Gansu Province,China

Methane(CH_(4))is an important greenhouse gas second only to CO_(2)in terms of its greenhouse effect.Vegetation plays an important role in controlling soil CH_(4)fluxes,but the spatial variability of soil CH_(4)fluxes during vegetation restoration in Loess Hilly Region(LHR)is not fully understood.The effects of different plant community types[Medicago sativa grassland(MS);Xanthoceras sorbifolium forestland(XS);Caragana korshinskii bushland(CK);Hippophae rhamnoides shrubland(HR);and Stipa bungeana grassland(SB)]on soil CH_(4)flux in LHR were studied via the static chamber technique.The results showed that the five plant community types were sinks of soil CH_(4)in LHR,the plant community type significantly affected the soil CH_(4)flux,and the average CH_(4)uptake from high to low was in SB,HR,CK,MS,and XS.During the whole study period,the soil CH_(4)flux showed similar interannual variation.The maximum absorption of soil CH_(4)appeared in the growing season,while the minimum appeared in winter.Soil CH_(4)uptake was positively correlated with soil temperature and soil moisture.Soil temperature and moisture are important controlling factors for the temporal variability of soil CH_(4)flux.In LHR,the Stipa bungeana grassland is the more suitable plant community type for reducing soil CH_(4)emissions.In the process of vegetation restoration in LHR,the soil CH_(4)absorption potential of different plant community types should be considered,ecological benefits should be taken into account,and vegetation more suitable for mitigating the greenhouse effect should be selected.

Classification of plant functional types based on the nutrition traits： a case study on alpine meadow community in the Zoigê Plateau

The ecological concept of Plant Functional Types(PFTs), which refers to the assemblage of plants with certain functional traits, has been introduced for the study of plant responses to the environment change and human disturbance. Taking the alpine meadow community in the Zoigê Plateau as a study case, this paper classified PFTs in terms of plant nutrition traits. The sequential results are as follows.(1) The main herbages in the Zoigê Plateau included 16 species in 5 families. Among the five families, Cyperaceae vegetation accounted for 81.37%of herbage area in total, while the remaining 4families occupied less than 20%. As for the species,Kobresia setchwanensis Hand.-Maizz. was dominant,accounting for 48.74% of the total area; while the remaining 51.26% was comprised of Polygonum viviparum L., Anaphalis fiavescens Hand.-Mazz.,Stipa aliena Keng and other species.(2) By using the Principal Component Analysis(PCA), the assessment of herbages nutrition was carried out based on the comprehensive multi-index evaluation model.Polygonum viviparum L. had the highest nutritional value score(1.43), and Stipa aliena Keng had the lowest(-1.40). Nutritional value of herbage species had a significantly positive correlation with altitude(P<0.01) in the Zoigê Plateau.(3) Based on the nutritional values, herbages in the Zoigê Plateau could be grouped into 3 nutrition PFTs(high, medium and low) by using the Natural Breaks(Jenks) method.

Patience with density and reasonable use of different plant types in maize hybrids

The appropriate density of the hybrids with different plant morphotypes and grainyield of main maize hybrids in Henan province under different conditions and in different placeshave been studied for many years.The results indicalte that all the light intensity in middle andlow part of the plant,the single leaf weight(SLW) and the photosynthetic intensity decrease re-markably with the increase of plant density and leaf area index(LAI),and that all the charactersof the sirgle plant yield becorne inferior with different magnitudes.But the seriousness is slighterfor compact type hybrids than that for spread ones.Under high yield condition,the desirabledensity is 4250 to 5000 plants per mu(666. 67m^2)for compact maize hybrids and 3300 to 3500plants for spread ones.The yield differences between the two kinds of hybrid vary with the yieldlevels.

THE INFLUENCE OF FERTILIZERS, NaHCO_3,SOIL TYPE ON CHEMISTRY OF FLOODED SOILS AND RICE PLANT GROWTH

This research was conducted to study the influence of NaHCO3and fertilizer treatments on flooded soils tothe chemistry of soil and rice plant growth.The experiment was done in a greenhouse using a split-split plot design ofthree factors: two types of soil,three doses of fertilizers and three levels of NaHCO3with three replications.The firstfactor was two kind of soils Fluvaquent and Calciquert,the factor was without nutrient(blank),macro nutrients,andcompletely nutrients(second macro and micro nutrients),and the third factor was 0 mg/kg,200 mg/kg and 400 mg/kgof NaHCO3or equivalent with 0 mg,1 200 mg and 2 400 mg NaHCO3per pot.Each experimental unit used a pot of 10L capacity and filled with soil mud equivalent with 6 kg of dried soil.After each of treatment combination mixed into themud soil,two plants of IR-32 variety were grown,and flooded at5 cm high accordingly with growth period.Parametersobserved were the growth of tillers,electrical conductivity(E.C.) and pH.The experiment results showed that the treatment of NaHCO3increased the soluble salt content(E.C.) and soilacidity(pH) during flooding on Calciquerts and Fluvaquents.The content of soluble salt decreased to 2.0 mmhos/cm,while pHon Calciquert decreased towards the neutral pH.Anyhowthe pHon Fluvaquents increased approach to neutral.The treatments of NaHCO3inhibited the tiller growth,either macro fertilizer and completely fertilizer increased thetillers,but did not improve the negative effect of alkalinity due to of NaHCOtreatment.

Genetic Analysis on Plant Type of Northern Japonica Hybrid Rice

This study was designed to analyze the genetic relationship of the morphological traits of the northern japonica hybrid rice. The genetic relationship of the morphological traits of the 100 cultivars combined by the 10 sterile lines and the 10 restore lines was studied by using the principle component analysis and the SAS and QGA. The results showed that compared with the female parent, most of the morphological traits related closely to their father. The additive genetic effect and the dominant genetic effect appeared significantly, and the former was more significant than the latter. Genetic correlation analysis indicated that high plants or high plants with more leaves were in favor of improving the number and the weight of the spike and producing the hybrid vigor. The important factors influencing the plant type of the northern japonica hybrid rice were the plant height （PH）, the angle of the flag leaf （FLA）, flag leaf length （FLL）, and the weight of the shoots and leaves （SLW）, respectively. The morphological traits system of the northern japonica hybrid rice was very complex, and the restore line should be given more importance compared with the sterile line, and PH, FLA, FLL, and SLW should be considered first in the plant type breeding.