In order to understand the relation between microstructure of superalloypowders and its solidification progress, the processing parameters are optimized during plasmarotating electrode processing (PREP). It was predic...In order to understand the relation between microstructure of superalloypowders and its solidification progress, the processing parameters are optimized during plasmarotating electrode processing (PREP). It was predicted from the results that the droplet velocities,droplet temperature, and fractional solidification with flight time about FGH95 superalloy droplethave been carried out based on Newtonian heat transfer formulation coupled with the classicalheterogeneous nucleation and the specific solidification process. It has been found that the dropletdynamic and thermal behavior is strongly affected by the distribution of droplet diameters, theproportion of cooling atmosphere, but is relatively unaffected by the droplet superheat.展开更多
In this study,the characteristics and solidification behavior of Ti-48Al-3Nb-1.5Ta powder produced by supreme-speed plasma rotating electrode process(SS-PREP®)were investigated.The microstructure,phase and charac...In this study,the characteristics and solidification behavior of Ti-48Al-3Nb-1.5Ta powder produced by supreme-speed plasma rotating electrode process(SS-PREP®)were investigated.The microstructure,phase and characteristics were analyzed by scanning electron microscopy,X-ray diffraction and other methods.The atomization mechanism is direct drop formation.The relationship between the particle size and cooling rate is vc=3.14×10^(-7)·d^(-2)+1.18×10^(-2)·d^(3/2),and the relationship between secondary dendrite arm space and the particle size isλ=0.028d+0.11,as well as the relationship between SDAS and cooling rate isλ=4.84×10^(-5)·T^(-1.43).With increase in particle size,the surface structure gradually changes from the featureless smooth structure to dendritic and cellular dendritic morphology,and the flow ability becomes better.The carbides mainly exist within 5 nm of the surface and the oxidation layer is about 20 nm thick.Ti-48Al-3Nb-1.5Ta powder was mainly composed ofα2 phase andγphase.With increase in particle size,the content ofγphase increases,and the hardness decreases accordingly.The 106–250μm particles are composed of multiple grains with the grain size of 70–80μm.The microstructure,phase composition and hardness of different TiAl powders with the same size are similar,but the elastic modulus is different.展开更多
The surface microstructure and the surface segregation of FGH 95 nickel-basedsuperalloy powders prepared through plasma rotating electrode processing (PREP) have beeninvestigated by using SEM and AES. The results indi...The surface microstructure and the surface segregation of FGH 95 nickel-basedsuperalloy powders prepared through plasma rotating electrode processing (PREP) have beeninvestigated by using SEM and AES. The results indicate that the surface microstructure of powderschanges from dendrite into cellular stricture as the particle size of powders decrease, and thepredominant precipitates solidified on the particle surfaces were identified as MC' type carbidesenriched with Nb and Ti. It was also indicated that along with the depth of particle surfaces, thesegregation layer of S, C and O elements are thick, and that of Ti, Cr elements are thin for largesire powders while they are in reverse for median size particles.展开更多
基金This work was financially supported by National Defence Committee of Science and Technolgy (No. 95-YJ-20)
文摘In order to understand the relation between microstructure of superalloypowders and its solidification progress, the processing parameters are optimized during plasmarotating electrode processing (PREP). It was predicted from the results that the droplet velocities,droplet temperature, and fractional solidification with flight time about FGH95 superalloy droplethave been carried out based on Newtonian heat transfer formulation coupled with the classicalheterogeneous nucleation and the specific solidification process. It has been found that the dropletdynamic and thermal behavior is strongly affected by the distribution of droplet diameters, theproportion of cooling atmosphere, but is relatively unaffected by the droplet superheat.
基金financially supported by the Key R&D Program of Shaanxi(Program No.2022GY-388).
文摘In this study,the characteristics and solidification behavior of Ti-48Al-3Nb-1.5Ta powder produced by supreme-speed plasma rotating electrode process(SS-PREP®)were investigated.The microstructure,phase and characteristics were analyzed by scanning electron microscopy,X-ray diffraction and other methods.The atomization mechanism is direct drop formation.The relationship between the particle size and cooling rate is vc=3.14×10^(-7)·d^(-2)+1.18×10^(-2)·d^(3/2),and the relationship between secondary dendrite arm space and the particle size isλ=0.028d+0.11,as well as the relationship between SDAS and cooling rate isλ=4.84×10^(-5)·T^(-1.43).With increase in particle size,the surface structure gradually changes from the featureless smooth structure to dendritic and cellular dendritic morphology,and the flow ability becomes better.The carbides mainly exist within 5 nm of the surface and the oxidation layer is about 20 nm thick.Ti-48Al-3Nb-1.5Ta powder was mainly composed ofα2 phase andγphase.With increase in particle size,the content ofγphase increases,and the hardness decreases accordingly.The 106–250μm particles are composed of multiple grains with the grain size of 70–80μm.The microstructure,phase composition and hardness of different TiAl powders with the same size are similar,but the elastic modulus is different.
基金This work is financially supported by The National Defence Committee of ChineseTechnology(No.95-YJ-20)
文摘The surface microstructure and the surface segregation of FGH 95 nickel-basedsuperalloy powders prepared through plasma rotating electrode processing (PREP) have beeninvestigated by using SEM and AES. The results indicate that the surface microstructure of powderschanges from dendrite into cellular stricture as the particle size of powders decrease, and thepredominant precipitates solidified on the particle surfaces were identified as MC' type carbidesenriched with Nb and Ti. It was also indicated that along with the depth of particle surfaces, thesegregation layer of S, C and O elements are thick, and that of Ti, Cr elements are thin for largesire powders while they are in reverse for median size particles.
基金Project(2016KJXX-78)supported by the Shaanxi Youth Science and Technology New Star Project,ChinaProject(2016KTCQ01-113)supported by the Shaanxi Science and Technology Co-ordination and Innovation Project,China+1 种基金Project(51604228)supported by the National Natural Science Foundation of ChinaProject supported by the Open Fund of State Key Laboratory for Powder Metallurgy,Central South University,China
