Bacteria Adherence Properties of Nitrided Layer on Ti6Al4V by the Plasma Nitriding Technique

The nitrided layer on Ti6A14V substrate was prepared by the plasma nitriding technique. The sample was characterized by X-ray diffraction （XRD）, glow discharge optical emission spectroscopy （GDOES）, X-ray photoelectron spectroscopy （XPS）, and rough-meter. X- ray diffraction analysis reveals that TiN, Ti2N and Ti phase exist in the nitrided layer subsurface. GDOES analysis shows the thickness of the nitrided layer is about 3 ~tm. XPS analysis shows that there is higher N, lower A1 and lower V in the nitrided layer surface than in the Ti6A14V surface. Rough-meter analysis results show the roughness of the nitrided layer is greater than that of Ti6A14V alloy base. The bacteria adherence property of the nitrided layer on Ti6A14V substrate on the Streptococcus mutans was investigated and compared with that of Ti6A14V alloy by fluorescence microscope. It shows that the nitrided layer inhibits the bacteria adherence.

Anti-oxidation characteristics of Cr-coating on surface of Ti-45Al-8.5Nb alloy by plasma surface metallurgy technique

TiAl-based alloys have received extensive attention recently due to their excellent properties. However, the weak oxidation resistance at temperatures higher than 800℃ can limit their further high-temperature structural applications.To improve the oxidation resistance of a high-Nb-content γ-TiAl alloy(Ti-45 Al-8.5 Nb, in units of at.%), a chromium(Cr)coating is prepared by using the plasma surface alloying technique, separately, at 800℃ and 1000℃. The x-ray diffraction(XRD) patterns reveal that an oxide surface layer consisting of Cr2O3, Al2O3, and TiO2 is produced on the Cr-coated Nb containing γ-TiAl substrates during the initial oxidation. However, the Cr2O3 is dominated in the oxide surface layer after being isothermally oxidized for 300 h. The oxidation kinetic curves are composed of a parabolic law stage(≤ 90 h) and a biquadratic law stage(≥ 90 h), fit by weight–gain curves. Due to diffusion in the fabrication process and oxidation process,the Cr-coated specimens have an adhesion force after being isothermally oxidized, specifically 69 N for a specimen after oxidation for 300 h. These results demonstrate that the Cr coating enhances the oxidation resistance and adhesion of a Ti-45 Al-8.5 Nb alloy, which may provide a new feasible scheme for designing oxidation protection layers.

Laser-produced plasma helium-like titanium Kα x-ray source and its application to Rayleigh-Taylor instability study

Several experiments are performed on the ShenGuang-Ⅱ laser facility to investigate an x-ray source and test radiography concepts. X-ray lines emitted from laser-produced plasmas are the most practical means of generating these high intensity sources. By using a time-integrated space-resolved keV spectroscope and pinhole camera, potential helium-like titanium Kα x-ray backlighting （radiography） line source is studied as a function of laser wavelength, ratio of pre-pulse intensity to main pulse intensity, and laser intensity （from 7.25 to ～ 11.3 × 10^15 W/cm2）. One-dimensional radiography using a grid consisting of 5 #m Au wires on 16 μm period and the pinhole-assisted point projection is tested. The measurements show that the size of the helium-like titanium Ka source from a simple foil target is larger than 100 ~m, and relative x-ray line emission conversion efficiency ~x from the incident laser light energy to helium- like titanium K-shell spectrum increases significantly with pre-pulse intensity increasing, increases rapidly with laser wavelength decreasing, and increases moderately with main laser intensity increasing. It is also found that a gold gird foils can reach an imaging resolution better than 5-μm featured with high contrast. It is further demonstrated that the pinhole-assisted point projection at such a level will be a novel two-dimensional imaging diagnostic technique for inertial confinement fusion experiments.

1∶7 Type Nanocrystalline SmCo_6Fe Sintered Magnet Prepared by Spark Plasma Sintering

Bulk nanocrystalline SmCo6Fe sintered magnet was prepared by Spark Plasma Sintering technique (SPS). XRD patterns show that the magnet exhibits a stable TbCu7 structure. TEM observation indicates that the microstructure of the magnet is composed of SmCo6Fe single phase grains with an average grain size of 30 nm. Magnetic measurement shows that under 9 T magnetic field, the coercivity of the magnet reaches 1.12 T; the saturation magnetization and the remanence are 1.13 and 0.67 T, respectively. The magnet has a (BH)max of 75.6 kJ·cm-3.

Compound Ceramic Coatings Grown by Micro-plasma Oxidation on Ti-6Al-4V Alloy

Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation （MPO） in NaAlO2 solution. The composition and morphology of the coatings were studied with the X-ray diffraction （XRD） and the scanning electron microscopy （SEM）, respectively. Inductively coupled plasma atomic emission spectrometer technique was used to analyze the solution features of Ti-6Al-4V alloy in the process of preparation. The results reveal that Al2TiO5 forms in the coatings at the initial stages of MPO reaction, and its content changes rapidly with the reaction continuing： after 20 min, the ceramics coatings are composed of α-Al2O3, 7-Al2O3 and Al2TiO5, but after 40 min, its main composition is of α-Al2O3. The content of Ti in the solution will increase when the MPO time extends, and as will Al in the anode area until, after 30 min, it reaches the maximum and keeps constant from then on. Both substrata of Ti and Al in the electrolyte join the MPO reaction at the initial stage, where the formation of Al2TiO5 happens; but as the MPO reaction prolongs, more and more Al in the electrolyte will take part in the reaction, leading to the appearance of a large amount ofAl2O3.

RESEARCH & DESIGN OF 60 kW SOFT-SWITCHING PLASMA CONVERTER

A novel 60 kW plasma converter with full range soft-switch by utilizing magnetizing inductance, leakage inductance and distributed inductance is introduced. The current injection phase-shifting technique is introduced into the research of soft-switching plasma converter successfully. The magnetic bias of transformer and the protection of switching parts are solved. The tests state that the power supply has excellent characteristics and higher efficiency and can meet the demand of large power plasma process well.

Structure and Corrosion Behaviours of Mo Modified Titanium in Saliva

The Mo surface modified layer on titanium was obtained by the plasma surface alloying technique. The structure and composition of the Mo modified titanium were investigated by X-ray diffraction （XRD） and glow discharge optical emission spectroscopy （GDOES）. The Mo modified layer contains Mo coating on subsurface and diffusion layers between the subsurface and substrate. The Xray diffraction analysis of the Mo modified titanium reveals that the outmost surface of the Mo modified titanium is composed of pure Mo. The electrochemical corrosion performance of the Mo modified titanium in saliva was investigated and compared with that of titanium. The chemical corrosion performance of the Mo modified titanium in 37 ℃ saliva was investigated and compared with that of titanium. The experimental results indicated that self-corroding electric potentials and corrosion-rate of the Mo modified titanium were higher than that of titanium in saliva. Corrosion-rate of the Mo modified titanium was lower than that of titanium in 37 ℃ saliva.

Corrosion property of copperized layer on Zr formed by double glow plasma surface alloying technique

Zr and its alloys have excellent mechanical properties as new structural material,but in specific application environment,its corrosion resistance still needs to be further explored.In this work,double glow plasma surface alloying technique was used for copperizing on pure Zr surface.Besides,X-ray diffraction（XRD）,scanning electron microscope（SEM） and energy dispersion spectrum（EDS） were employed to characterize the samples.Furthermore,research was also conducted on the polarization curve of the samples in different solutions.Copperizing on surface can improve corrosion resistance of pure Zr in 3.5 % Na Cl and 0.5 moláL-1Na OH solutions.Especially in 0.5 moláL-1Na OH solution,the corrosion resistance can achieve significant improvement.However,copperizing has no influence on the improvement of corrosion resistance of pure Zr in 0.5 moláL-1H2SO4 solution.The results may provide new insight into way for improving the corrosion property of zirconium alloys.

Microstructure and Wear Resistance of N-Doped TiO_2 Coatings Grown on Stainless Steel by Plasma Surface Alloying Technology

N doped TiO2 （N-TiO2） coatings were obtained by oxidation of titanium nitride coatings, which were pre pared by the plasma surface alloying technique on stainless steel （SS）. The microstructure of N-TiO2 coatings was characterized by X-ray diffraction （XRD）, glow discharge optical emission spectrometry （GDOES）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM）, respectively. Ball-on-disc sliding wear was applied to test and compare the tribological behaviors of the coatings and substrate. XRD patterns showed that anatase type TiO2 existed in the coatings after oxidation. GDOES showed that the resultant coatings had a layered structure, comprising of N-TiO2 layer at the top and a diffusion-type interface. Such a hybrid coatings system showed good adhesion with the substrate. According to XPS, residual N atoms partially occupied O atom sites in the TiO2 lattice. Uniform, continuous and compact coatings were observed by SEM images of coatings after oxidation. Under a load of 7.6 N, the coefficient of friction was in the range of 0.27--0.38 for the N-TiO2/Al2O3 systems and the wear rate of the coatings was only one-fourteenth of that for untreated 316L SS. N-TiO2 coatings displayed much better wear resistance and antifrietion performance than SS substrate.