Deterioration Reason and Improvement Measure of the Retarding Effect of Protein Retarder on Phosphorus Building Gypsum

The retarding effect of protein retarder on phosphorus building gypsum(PBG)and desulfurization building gypsum(DBG)was investigated,and the results show that protein retarder for DBG can effectively prolong the setting time and displays a better retarding effect,but for PBG shows a poor retarding effect.Furthermore,the deterioration reason of the retarding effect of protein retarder on PBG was investigated by measuring the pH value and the retarder concentration of the liquid phase from vacuum filtration of PBG slurry at different hydration time,and the measure to improve the retarding effect of protein retarding on PBG was suggested.The pH value of PBG slurry(<5.0)is lower than that of DBG slurry(7.8-8.5).After hydration for 5 min,the concentration of retarder in liquid phase of DBG slurry gradually decreases,but in liquid phase of PBG slurry continually increases,which results in the worse retarding effect of protein retarder on PBG.The liquid phase pH value of PBG slurry can be adjusted higher by sodium silicate,which is beneficial to improvement in the retarding effect of the retarder.By adding 1.0%of sodium silicate,the initial setting time of PBG was efficiently prolonged from 17 to 210 min,but little effect on the absolute dry flexural strength was observed.

Evolution and Application of Sealing Ability of Gypsum Caprocks under Temperature-Pressure Coupling:An Example of the ZS5 Well in the Tazhong Area of the Tarim Basin

Gypsum caprocks'sealing ability is affected by temperature-pressure coupling.Due to the limitations of experimental conditions,there is still a lack of triaxial stress-strain experiments that simultaneously consider changes in temperature and pressure conditions,which limits the accuracy of the comprehensive evaluation of the brittle plastic evolution and sealing ability of gypsum rocks using temperature pressure coupling.Triaxial stress-strain tests were utilized to investigate the differences in the evolution of the confinement capacity of gypsum rocks under coupled temperaturepressure action and isothermal-variable pressure action on the basis of sample feasibility analysis.According to research,the gypsum rock's peak and residual strengths decrease under simultaneous increases in temperature and pressure over isothermal pressurization experimental conditions,and it becomes more ductile.This reduces the amount of time it takes for the rock to transition from brittle to plastic.When temperature is taken into account,both the brittle–plastic transformation's depth limit and the lithological transformation of gypsum rocks become shallower,and the evolution of gypsum rocks under variable temperature and pressure conditions is more complicated than that under isothermal pressurization.The sealing ability under the temperature-pressure coupling is more in line with the actual geological context when the application results of the Well#ZS5 are compared.This provides a theoretical basis for precisely determining the process of hydrocarbon accumulation and explains why the early hydrocarbon were not well preserved.

Gypsum-based Silica Gel Humidity-controlling Composite Materials:Preparation,Characterization,and Performance

Gypsum was used as substrate,and silica gel was mixed into substrate at a certain mass ratio to prepare humidity-controlling composites;moreover,the moisture absorption and desorption properties of gypsum-based composites were compared with adding different silica gel particle size and proportion.The morphological characteristics,the isothermal equilibrium moisture content curve,moisture absorption and desorption rate,moisture absorption and desorption stability,and humidity-conditioning performance were tested and analyzed.The experimental results show that,compared with pure-gypsum,the surface structure of the gypsum-based composites is relatively loose,the quantity,density and aperture of the pores in the structure increase.The absorption and desorption capacity increase along with the increase of silica gel particle size and silica gel proportion.When 3 mm silica gel particle size is added with a mass ratio of 40%,the maximum equilibrium moisture content of humidity-controlling composites is 0.161 g/g at 98% relative humidity(RH),3.22 times that of pure-gypsum.The moisture absorption and desorption rates are increased,the equilibrium moisture absorption and desorption rates are 2.68 times and 1.61 times that of pure-gypsum at 58.5% RH,respectively.The gypsum-based composites have a good stability,which has better timely response to dynamic humidity changes and can effectively regulate indoor humidity under natural conditions.

New Data on Coal, Gypsum, Iron and Silica Sand Deposits and Geochemical Exploration (Pakistan): Revision of 25 Years History of Dinosaur Discoveries from Pakistan

Discoveries of many coal seams at depths by drilling carried by Geological Survey of Pakistan in Sor Range and Harnai Gochina, extended the coal seams at depth which is challenge for mine owners to exploit feasibly. Bed to bed gypsum samplings (and their chemical analyses) of huge gypsum deposits from Sulaiman foldbelt is a base for industrialist and also planers to develop cement and gypsum industries to increase export and foreign exchange for the development of area and Pakistan. Low and high grade sedimentary iron deposits, silica sand and uranium host rocks and their extensions in Sulaiman and Kirthar foldbelts are presented. Anomalies of a few base metals arise as a result of geochemical exploration carried at part of Loralai District of Balochistan. Theropod dinosaurs were frequent in India, while Poripuchian titanosaurs (Sauropoda, Dinosauria) were frequent in Pakistan. Besides some ichnotaxa, many bone taxa such as 1 titanosauriform, 14 titanosaurian sauropod (including one new titanosaur), and 3 theropod dinosaurs are established from Pakistan. Among these 12 titanosaur species and 3 theropod species are named in about 10 km2 area of Vitakri dome and 2 titanosaur species are named in about a few hundred square meter area of Mari Bohri (Kachi Bohri) which is about 10 km westward from Vitakri dome. Pakistan is a unique country which discoverd 14 diversified titanosaurs in a short area and also in a short period (67 - 66 million years ago/Ma). About 400 bones found from a few meter thick upper part of upper shale horizon of latest Maastrichtian Vitakri Formation which is base for titanosaur taxa. Cranial material is in low fraction (but include significant diverse snouts), caudal vertebrae are prominent, the cervicals, dorsals and sacrals have significant numbers, forelimb and hind limb bones have balanced fraction. Humeri, femora and tibiae are most common. To know the position of Pakistani titanosaurs among titanosaurs and sauropods, there is a need to extend list of characters for phylogenetic analyses. This broad feature list should include main characters of titanosaurs from Pakistan and also from global world.

Production and Characterization of a Composite Based on Plaster and Juncus Maritimus Plant Fibers

Nowadays,materials with a limited impact on the environment are required in the construction sector.Considering the interesting properties of natural elements such as natural fibers,it seems advantageous to use them to reinforce materials while protecting the environment and guaranteeing economic gain.Along these lines,this research was devoted to studying the effect of untreated natural fibers extracted from the Juncus maritimus plant(from Southern Morocco)on plaster.First,the effect of the percentage of added fibers on the fluidity of the plaster was evaluated by means of the Marsh’s cone method,that is,by measuring the time taken by a known volume of plaster to flow from a cone through a short tube.Then,the highly porous microstructure of the plaster was observed using a scanning electron microscope(SEM).The diffractogram of Juncus maritimus fibers was built by means of a X-ray diffraction(XRD)method.The values obtained for the wet thermal conductivity of the composites decreased from 0.4853 W/m.K for the reference specimen to 0.4324 W/m K for a fiber volume content of 40%.The densities were calculated to determine the lightness of each composite.The mechanical strengths[flexural and compressive]were evaluated for different percentages of rush fibers.The addition of 20%volume fiber was found to improve the flexural strength to 3.63 MPa compared to the sample without fiber(3.36 MPa),thereby ensuring good toughness of the considered material.Nevertheless,a reduction in compressive strength was observed,due to the poor adhesion between the fibers and the plaster matrix.

Deep decalcification of factory-provided freezing acidolysis solution to achieveα-high-strength gypsum

The freezing acidolysis solution of the nitric acid-phosphate fertilizer process has a high calcium content,which makes it difficult to produce fine phosphate and high water-soluble phosphate fertilizer products.Here,based on the potential crystallization principle of calcium sulfate in NH_(4)NO_(3)-H_(3)PO_(4)-H_(2)O,the deep decalcification(i.e.calcium removal)technology to achieveα-high-strength gypsum originated from freezing acidolysis-solutions has been firstly proposed and investigated.Typically,calcium can be removed from the factory-provided freezing acidolysis-solution by neutralizing it with ammonia,followed by the addition of ammonium sulfate solution.As a result,the formation of calcium sulfate in the reaction system undergoes the nucleation and growth of CaSO_(4)·2H_(2)O(DH),as well as its dissolution and crystallization into short columnarα-CaSO_(4)·0.5H_(2)O(α-HH).Remarkably,with the molar ratio of SO_(4)^(2-)/Ca^(2+)at 1.8,the degree of neutralization(NH_(3)/HNO_(3) molar ratio)at 1.7,the reaction temperature of 94℃,and the reaction time of 300 min,the decalcification rate can reach 86.89%,of which the high-strengthα-CaSO_(4)·0.5H_(2)O(α-HH)will be obtained.Noteworthy,the deep decalcification product meets the standards for the production of fine phosphates and highly water-soluble phosphate fertilizers.Consequently,the 2 h flexural strength ofα-HH is 5.3 MPa and the dry compressive strength is 36.8 MPa,which is up to the standard of commercialα-HH.

Enhanced dealkalization of bauxite residue through calcium-activated desulfurization gypsum

A novel integrated approach to remove the free alkalis and stabilize solid-phase alkalinity by controlling the release of Ca from desulfurization gypsum was developed.The combination of recycled FeCl_(3)solution and EDTA activated desulfurization gypsum lowered the bauxite residue pH to 7.20.Moreover,it also improved the residual Ca state,with its contribution to the total exchangeable cations increased(68%-92%).Notably,the slow release of exchangeable Ca introduced through modified desulfurization gypsum induced a phase transition of the alkaline minerals.This treatment stabilized the dealkalization effect of bauxite residue via reducing its overall acid neutralization capacity in abating pH rebound.Hence,this approach can provide guidance for effectively utilizing desulfurization gypsum to achieve stable regulation of alkalinity in bauxite residue.

Study on the effect of Shixiang plaster on the expression of CD31,serum FN,and VEGF in a rat model with chronic wounds

Background:Chronic wounds pose a significant surgical challenge,often requiring traditional treatments with limited efficacy.This study explores the promising impact of Shixiang plaster,a classic Chinese ointment,on wound healing.We investigated the cluster of differentiation 31(CD31)expression,serum fibronectin(FN),and vascular endothelial growth factor(VEGF)levels in SPF rats with induced wounds to elucidate the mechanism behind Shixiang plaster’s effectiveness.We investigated the effect and explored the role of Shixiang plaster on the expression of CD31,serum FN,and VEGF in chronic wounds.Methods:The study involved 36 SPF rats divided into model,rb-bFGF,and Shixiang plaster groups.Penicillin was injected into the rats before modelling for 3 days to prevent infection.The skin was excised 2 cm below the horizontal line of the inferior border of the shoulder bone in the middle of the rat column up to the deep fascial layer and inoculated with a certain concentration of Staphylococcus aureus;the wound was covered aseptically for 3 days.The trauma area of the rats was observed at 3,7,and 14 days,respectively.Histopathology was observed using haematoxylin eosin and Masson staining.CD31 expression was detected using immunohistochemistry staining.FN and VEGF expression was detected using serum ELISA.Statistical analyses were carried out by the method of SPSS.Results:Regarding wound morphology,at 3 days,the recovery area of the Shixiang plaster group was larger than that of the other two groups,at 7 days,the wound healing rate of the Shixiang plaster group was significantly higher,and at 14 days,the wounds of the Shixiang plaster group had been mostly healed,with a healing rate of 98.3%.Haematoxylin eosin staining revealed a large amount of granulation tissue at 3 days in the Shixiang plaster group,and the epidermal scales disappeared at 14 days,with thinner epidermal thickness at 1 lesion and a large reduction in inflammatory cell infiltration.Masson staining showed that at 3,7,and 14 days,blue staining was the most abundant and deeper in the Shixiang plaster group,with richer collagen and a compact tissue matrix.Immunohistochemical testing showed strong positive expression of CD31 in the Shixiang plaster group,with abundant neovascularisation and large official lumens extending towards the surface of the wound.Statistically significant elevated expression of FN at 7 and 14 days was determined by ELISA in the Shixiang plaster group,and VEGF expression was significantly increased at 7 days,but expression had been expressed at a low level at 14 days.Conclusion:Shixiang plaster exhibits remarkable efficacy in healing chronic wounds.The proposed mechanism involves FN’s promotion of angiogenesis and cell proliferation,VEGF’s impact on angiogenesis and inflammation,and CD31’s regulatory role in inhibiting inflammation while promoting angiogenesis.

Preparation of α-High Strength Gypsum from Flue Gas Desulfurization Gypsum Pretreated by Hydrothermal-aging Method

The synthesis of α-calcium sulfate hemihydrate (α-CSH) from flue gas desulfurization (FGD)gypsum is a good way to realize the comprehensive utilization of FGD gypsum. To obtainα-CSH with the satisfactory performances, a facile hydrothermal-aging pretreatment process for FGD gypsum raw materials was proposed, where FGD gypsum was firstly hydrothermally converted to α-CSH whiskers, and α-CSH whiskers were further hydrated to synthesize CaSO4·2H2O (CSD) by aging under the regulation of N,N'-methylenebisacrylamide (MBA). The effects of aging time, MBA addition, aging temperature, and pH on the morphology of the synthesized CSD were investigated. The synthesized CSD crystals exhibit highly uniform prismatic morphology with the length of ca 100μm and the whiteness of 91.56%. The regulation mechanism of MBA was also illustrated. The synthesized CSD crystals with prismatic morphology were further used as raw materials to synthesize the short columnar α-CSH. The absolute dry compressive strength of paste prepared from the short columnar α-CSH is 40.85 MPa, which reaches α40 strength grade.

Effect of Low pH on Forming Process of Desulfurization Gypsum Composite Boards Strengthened by Melamine-formaldehyde Resin

Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.

Effect of integration of mechanical ball milling and flue gas desulfurization gypsum on dealkalization of bauxite residue

The synergistic impact of mechanical ball milling and flue gas desulfurization(FGD)gypsum on the dealkalization of bauxite residue was investigated through integrated analyses of solution chemistry,mineralogy,and microtopography.The results showed a significant decrease in Na_(2)O content(>30 wt.%)of FGD gypsum-treated bauxite residue after 30 min of mechanical ball milling.Mechanical ball milling resulted in differentiation of the elemental distribution,modification of the minerals in crystalline structure,and promotion in the dissolution of alkaline minerals,thus enhancing the acid neutralization capacity of bauxite residue.5 wt.%FGD gypsum combined with 30 min mechanical ball milling was optimal for the dealkalization of bauxite residue.

Thermo-Physical Potential of Recycled Banana Fibers for Improving the Thermal and Mechanical Properties of Biosourced Gypsum-Based Materials

The development of bio-sourced materials is essential to ensuring sustainable construction;it is considered a locomotive of the green economy.Furthermore,it is an abundant material in our country,to which very little attention is being given.This work aims to valorize the waste of the trunks of banana trees to be used in construction.Firstly,the physicochemical properties of the fiber,such as the percentage of crystallization and its morphology,have been determined by X-ray diffraction tests and scanning electron microscopy to confirm the potential and the impact of the mode of drying on the quality of the banana fibers,with the purpose to promote the use of this material in construction.Secondly,the results obtained with the gypsum matrix allowed us to note a preponderant improvement in the composite’s thermal properties thanks to the variation of the banana fiber additive.Thirdly,the impact of the nature of the banana fiber distribution(either fiber mixed in matrix or fiber series model)on the flexural and compressive strengths of the composites was studied.The results obtained indicate that the insulation gain reaches up to 40%.It depends on the volume fraction and type of distribution of the banana fibers.However,the thermal inertia of the composites developed,represented by thermal diffusivity and thermal effusivity,was studied.Results indicate a gain of 40%and 25%,respectively,in terms of thermal diffusivity and thermal effusivity of the developed composites compared to plaster alone.Concerning the mechanical properties,the flexural strength depends on the percentage of the volume fraction of banana fibers used,and it can reach 20%more than the flexural strength of plaster;nevertheless,there is a significant loss in terms of the compressive strength of the studied composites.The results obtained are confirmed by the microstructure of the fiber banana.In fact,the morphology of the banana fibers was improved by the drying process.It reduces the amorphous area and improves the cellulosic crystalline surfaces,which assures good adhesion between the fiber and the matrix plaster.Finally,the dimensionless coefficient analysis was done to judge the optimal proportion of the banana fiber additive and to recommend its use even on false ceilings or walls.

Efficacy of borneol-gypsum in skin regeneration and pain control in toxic epidermal necrolysis:A case report

BACKGROUND Toxic epidermal necrolysis(TEN)is a life-threatening dermatological emergency mainly induced by drug hypersensitivity reactions.Standard management includes discontinuation of culprit drug and application of immunomodulatory therapy.However,mortality remains high due to complications like septic shock and multiorgan failures.Innovative approaches for skin care are crucial.This report introduces borneol-gypsum,a traditional Chinese drug but a novel dressing serving as an adjuvant of TEN therapy,might significantly improve skin conditions and patient outcomes in TEN.CASE SUMMARY A 38-year-old woman diagnosed with eosinophilic granulomatosis with polyangiitis experienced gangrenous complications and motor nerve involvement.After initial treatment of high-dose corticosteroids and cyclophosphamide,symptom of foot drop improved,absolute eosinophil counts decreased,while limb pain sustained.Duloxetine was added to alleviate her symptom.Subsequently,TEN developed.Additional topical application of borneol-gypsum dressing not only protected the skin lesions from infection but also significantly eased localized pain.This approach demonstrated its merit in TEN management by promoting skin healing and potentially reducing infection risks.CONCLUSION Borneol-gypsum dressing is a promising adjuvant that could significantly improve TEN management,skin regeneration,and patient comfort.

Investigation of the Fermentation Mode of Rice Husk for the Stabilization of Earth Plaster

Despite its low resistance to humidity, adobe remains the most widely used material for housing construction, particularly in developing countries. The present study aims to assess different modes of use of fermented RH and to evaluate their influence on the behavior of raw earth for application in plaster. The influences of two types of RH are evaluated: granular rice husk (RHg) and powdered RH (RHp). The clay mainly consists of clay (40%), silt (22%), and sand (38.4%), with a small proportion of gravel (0.24%). Its liquidity limit is 40% and the plasticity index is 26.5%. The mixtures were designed using earth and each of the two rice husks at the volumetric content of 10%, 15% and 20% of the total volume mixed with water 36.5%, 38.5% and 40.3% and fermented for three weeks. Each fermented mixture was added to the soil to form the paste, and 40 × 40 × 160 mm3 test speciments were made for characterization. The results generally show an improvement in the physico-mechanical properties and water resistance of the mortars containing fermented RH, with an optimal content between 10% and 15%. The powdered RH improved the performance of the mortar better than granular RH.

Thermal Performance Analysis of Plaster Reinforced with Raffia Vinifera Particles for Use as Insulating Materials in Building

The present study focuses on the formulation of new composite consisting of plaster and raffia vinifera particle (RVP) with the purpose to reducing energy consumption. The aim of this study is to test this new compound as an insulating eco-material in building in a tropical climate. The composites samples were developed by mixing plaster with raffia vinifera particles (RVP) using three different sizes (1.6 mm, 2.5 mm and 4 mm). The effects of four different RVP incorporations rates (i.e., 0wt%, 5wt%;10wt%;15wt%) on physical, thermal, mechanicals properties of the composites were investigated. In addition, the use of the raffia vinifera particles and plaster based composite material as building envelopes thermal insulation material is studied by the habitable cell thermal behavior instrumentation. The results indicate that the incorporation of raffia vinifera particle leads to improve the new composite physical, mechanical and thermal properties. And the parametric analysis reveals that the sampling rate and the size of raffia vinifera particles are the most decisive factor to impact these properties, and to decreases in the thermal conductivity which leads to an improvement to the thermal resistance and energy savings. The best improvement of plaster composite was obtained at the raffia vinifera particles size between 2.5 and 4.0 mm loading of 5wt% (C95P5R) with a good ratio of thermo-physical-mechanical properties. Additionally, the habitable cell experimental thermal behavior, with the new raffia vinifera particles and plaster-based composite as thermal insulating material for building walls, gives an average damping of 4°C and 5.8°C in the insulated house interior environment respectively for cold and hot cases compared to the outside environment and the uninsulated house interior environment. The current study highlights that this mixture gives the new composite thermal insulation properties applicable in the eco-construction of habitats in tropical environments.

Effect of Head Meridian Massage Combined with Auricular Acupoint Plaster on Patients with Insomnia

Objective:To study the effect of head meridian massage combined with auricular acupoint plasters on patients with insomnia.Methods:The sample consisted of 50 cases,and all of them were admitted to Yixing Hospital of Traditional Chinese Medicine from January 2022 to December 2023.The patients were divided into an observation group and a control group,with 25 cases in each group.The observation group was treated with a combination of head meridian massage and auricular acupoint plaster while the control group underwent conventional nursing care.The improvement of sleep quality and nursing effect were used as evaluation criteria to compare the clinical effects of the nursing programs.Results:After nursing intervention,the Pittsburgh sleep quality index(PSQI)score of the observation group,which was 7.17±1.41 points was lower than that of the control group(9.04±1.96 points),(t=3.8724,P<0.05).The total efficacy was 96.00%for the observation group and 76.00%for the control group(2=4.1528,P<0.05).Conclusion:Head meridian massage combined with auricular acupoint can improve the sleep quality of patients with insomnia.

Yinqiao Sanhuang Paste Combined with Traditional Chinese Medicine Plaster for the Intervention of Drug Rash Induced by Targeted Therapy in Lung Cancer

Objective:To observe the efficacy and safety of Yinqiao Sanhuang Paste combined with traditional Chinese medicine plaster in treating drug rash caused by targeted therapy in lung cancer.Methods:A total of 100 lung cancer patients treated at our hospital from January 2021 to December 2023 were selected and randomly divided into an observation group and a control group,with 50 patients in each group.The control group received conventional medication,while the observation group was treated with Yinqiao Sanhuang Paste combined with traditional Chinese medicine plaster.The clinical symptom improvement and adverse reactions in both groups were observed.Results:The effective rate in the control group was 80.00%,while in the observation group,it was 96.00%,with a statistically significant difference between the two groups(P<0.05).The onset time,duration,and significant effect time in the control group were(2.41±0.29)days,(4.42±1.21)days,and(5.45±0.29)days,respectively;in the observation group,they were(2.44±0.21)days,(4.28±1.11)days,and(5.57±1.01)days,respectively.There was no statistically significant difference in the total onset time and total duration between the two groups(P>0.05).The incidence of adverse reactions in the control group was 28.00%,higher than the observation group’s 10.00%(P<0.05).Conclusion:Yinqiao Sanhuang Paste combined with traditional Chinese medicine plaster can effectively reduce the symptoms of drug rash induced by targeted therapy in lung cancer and lower the incidence of adverse reactions,indicating good clinical application value.

Experimental Investigation on the Thermal Properties of Gypsum Plaster-Rice Husk Ash Composite

This experimental investigation aims at evaluating the thermal properties of rice husk ash (RHA)—filled gypsum plaster composite for potential applications, as insulating materials. The thermal conductivities of composites of gypsum plaster reinforced with RHA at 0%, 10%, 20%, 30%, and 40% volume fractions were determined experimentally using Lee’s disc method. The experimental results show that integrating RHA reduces the thermal conductivity of gypsum plaster and improves its insulation capacity. The results obtained from the experiments were compared with the Rule of Mixture Model, Maxwell Model, and Russell Model. It was observed that the thermal conductivities obtained from experiments and the theoretical models decreased with an increase in the volume fraction of RHA. The errors associated with the models with respect to experimental results are on the average of 28.7% for Mixture Rule, 31.6% for Russel Model, and 18.8% for the Maxwell Model. An agricultural waste like RHA can be beneficially used for the preparation of composites and, due to improved insulation capability, these composites can be used for applications such as insulation boards and sheathing, hardboard, ceilings of roofs, decorations, etc.

Research on the Performance of Titanium Gypsum Concrete Based on Calcium-Silicon-Sulfur Ratio

Based on the high sulfur content in titanium gypsum,the concept of the calcium-silicon-sulfur(Ca/Si/S)ratio was proposed.The Ca/Si/S ratio of concrete was adjusted by changing the titanium gypsum,fly ash,and cement con-tent.The effects of different Ca/Si/S ratios on the mechanical properties,hydration products,and concrete micro-structure were investigated by nuclear magnetic resonance,uniaxial compression,and scanning electron microscopy.The result shows:(1)The compressive strength of concrete mixed with titanium gypsum increases first and then decreases with the Ca/Si/S ratio decrease.When the Ca/Si/S ratio is 1:0.85:0.10,the strength reaches the peak and is lower than the blank group.(2)The microstructure indicates the addition of titanium gypsum can effectively stimulate the activity of fly ash.Still,too much or too little titanium gypsum will hamper concrete strength development.(3)Titanium gypsum concrete’s nuclear magnetic resonance T2 spectrum has two characteristic peaks.With the Ca/Si/S ratio decreasing,the micropores in the concrete expand towards the macropores.The compressive strength is negatively correlated with the proportion of macropores and is positively correlated with the proportion of no-capillary pores.

Evaluation of Cobalt Application Combined with Gypsum and Compost as a Regulator of Cabbage Plant Tolerance to Soil Salinity

In response to the global food crisis and the imperative to address soil degradation, the international agricultural policy is actively working to alleviate the adverse impacts of soil salinity. As part of this initiative, a field trial spanning two consecutive seasons (2019/20-2020/21) was conducted under saline conditions. The primary objective was to evaluate the influence of various compost sources, including vermicompost at a rate of 0.5 ton·fed-1 and plant residues compost at a rate of 5.0 ton·fed-1, as main plots. Subplots were established by applying agricultural gypsum, both in the presence and absence of gypsum requirements. Additionally, sub-subplots were created by externally applying cobalt at a rate of 10.0 mg·L-1, with one sub-subplot receiving foliar cobalt application and the other not. The trial sought to assess the growth performance, chemical composition, enzymatic antioxidants, yield, and quality of cabbage plants (Brassica oleracea var. capitata L.) cultivated in saline soil. According to the findings, cabbage plants exhibited the most favorable response in terms of plant height, chlorophyll content, carotene levels, leaf area, nitrogen (N), phosphorus (P), potassium (K), head yield, vitamin C, and total dissolved solids (TDS) when treated with vermicompost, followed by plant compost. Conversely, plants grown without compost exhibited the least improvement in performance. Cabbage treated with agricultural gypsum requirements showed better performance than those without gypsum amendment. Moreover, plants subjected to cobalt spray demonstrated the highest growth, yield, and quality parameters compared to those without cobalt foliar application. In contrast, the control group (plants without the studied treatments) displayed the highest levels of enzymatic antioxidants, specifically catalase and peroxidase. This indicates that soil salinity stress led to an increase in catalase and peroxidase production in cabbage plants as a defense against the harmful impact of reactive oxygen species (ROS) resulting from soil salinity stress. The applied treatments (compost, gypsum, and cobalt) led to a reduction in the cabbage plant’s inherent production of catalase and peroxidase. Generally, the combined treatment of vermicompost × gypsum requirements × cobalt proved effective in mitigating the detrimental effects of soil salinity on cabbage plants. These findings hold significance for farmers and policymakers aiming to enhance agricultural productivity in regions affected by soil salinity. Additionally, further research can explore the long-term effects of these treatments on soil health and crop sustainability.