Continuous biodiesel production from a waste pig-roasting lard,methanol and KOH was carried out in a reciprocating plate reactor(RPR)using a factorial design containing three process factors,namely methanol/lard molar...Continuous biodiesel production from a waste pig-roasting lard,methanol and KOH was carried out in a reciprocating plate reactor(RPR)using a factorial design containing three process factors,namely methanol/lard molar ratio,catalyst loading,and normalized height of the reactor.The main goals were to optimize the influential process factors with respect to biodiesel purity using the response surface methodology and to model the kinetics of the transesterification reaction in order to describe the change of triacylglycerols(TAG)and fatty acid methyl esters(FAME)concentrations along the RPR height.The first-order rate law was proved for both the reaction and the mass transfer.The model of the changing reaction mechanism and mass transfer of TAG was also applicable.Both kinetic models agreed with the experimental concentrations of TAG and FAME determined along the RPR height.展开更多
The second Egyptian research reactor ET-RR-2 went critical on the 27th of November 1997.The National Center of Nuclear Safety and Radiation Control (NCNSRC) has the responsibility of the evaluation and assessment of t...The second Egyptian research reactor ET-RR-2 went critical on the 27th of November 1997.The National Center of Nuclear Safety and Radiation Control (NCNSRC) has the responsibility of the evaluation and assessment of the safety of this reactor.The purpose of this paper is to present an approach to optimization of the fuel element plate. For an efficient search through the solution space we use a multi objective genetic algorithm which allows us to identify a set of Pareto optimal solutions providing the decision maker with the complete spectrum of optimal solutions with respect to the various targets.The aim of this paper is to propose a new approach for optimizing the fuel element plate in the reactor.The fuel element plate is designed with a view to improve reliability and lifetime and it is one of the most important elements during the shut down.In this present paper,we present a conceptual design approach for fuel element plate,in conjunction with a genetic algorithm to obtain a fuel plate that maximizes a fitness value to optimize the safety design of the fuel plate.展开更多
Thermal fatigue property of the divertor plate is one of the key issues that governs the lifetime of the divertor plate. Taking tungsten as surface material, a small-mock-up divertor plate was made by hot isostatic pr...Thermal fatigue property of the divertor plate is one of the key issues that governs the lifetime of the divertor plate. Taking tungsten as surface material, a small-mock-up divertor plate was made by hot isostatic press welding (HIP). A thermal cycling experiment for divertor mock-up was carried out in the vacuum, where a high-heat-flux electronic gun was used as the thermal source. A cyclic heat flux of 9 MW/m2 was loaded onto the mock-up, a heating duration of 20 s was selected, the cooling water flow rate was 80 ml/s. After 1000 cycles, the surface and the W/Cu joint of the mock-up did not show any damage. The SEM was used to analyze the microstructure of the welding joint, where no cracks were found also.展开更多
The demand for nuclear fuel for research reactors is rising worldwide. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing dem...The demand for nuclear fuel for research reactors is rising worldwide. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently and safely. We proposed a specific procedure for increasing production capacity. That procedure was tested with data from a real plant, which produces plate-type fuel elements loaded with LEU U3Si2-Al fuel. The test was made by means of discrete event simulation, and the results indicated the proposed procedure is efficient in raising production capacity.展开更多
基金Supported by the Ministry of Education,Science and Technological Development of the Republic of Serbia(ProjectⅢ45001)the Project 0-14-18 of the SASA Branch in Nis,Serbia.
文摘Continuous biodiesel production from a waste pig-roasting lard,methanol and KOH was carried out in a reciprocating plate reactor(RPR)using a factorial design containing three process factors,namely methanol/lard molar ratio,catalyst loading,and normalized height of the reactor.The main goals were to optimize the influential process factors with respect to biodiesel purity using the response surface methodology and to model the kinetics of the transesterification reaction in order to describe the change of triacylglycerols(TAG)and fatty acid methyl esters(FAME)concentrations along the RPR height.The first-order rate law was proved for both the reaction and the mass transfer.The model of the changing reaction mechanism and mass transfer of TAG was also applicable.Both kinetic models agreed with the experimental concentrations of TAG and FAME determined along the RPR height.
文摘The second Egyptian research reactor ET-RR-2 went critical on the 27th of November 1997.The National Center of Nuclear Safety and Radiation Control (NCNSRC) has the responsibility of the evaluation and assessment of the safety of this reactor.The purpose of this paper is to present an approach to optimization of the fuel element plate. For an efficient search through the solution space we use a multi objective genetic algorithm which allows us to identify a set of Pareto optimal solutions providing the decision maker with the complete spectrum of optimal solutions with respect to the various targets.The aim of this paper is to propose a new approach for optimizing the fuel element plate in the reactor.The fuel element plate is designed with a view to improve reliability and lifetime and it is one of the most important elements during the shut down.In this present paper,we present a conceptual design approach for fuel element plate,in conjunction with a genetic algorithm to obtain a fuel plate that maximizes a fitness value to optimize the safety design of the fuel plate.
基金This work was supported by National Natural Science Foundation of China No.19889502.
文摘Thermal fatigue property of the divertor plate is one of the key issues that governs the lifetime of the divertor plate. Taking tungsten as surface material, a small-mock-up divertor plate was made by hot isostatic press welding (HIP). A thermal cycling experiment for divertor mock-up was carried out in the vacuum, where a high-heat-flux electronic gun was used as the thermal source. A cyclic heat flux of 9 MW/m2 was loaded onto the mock-up, a heating duration of 20 s was selected, the cooling water flow rate was 80 ml/s. After 1000 cycles, the surface and the W/Cu joint of the mock-up did not show any damage. The SEM was used to analyze the microstructure of the welding joint, where no cracks were found also.
文摘The demand for nuclear fuel for research reactors is rising worldwide. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently and safely. We proposed a specific procedure for increasing production capacity. That procedure was tested with data from a real plant, which produces plate-type fuel elements loaded with LEU U3Si2-Al fuel. The test was made by means of discrete event simulation, and the results indicated the proposed procedure is efficient in raising production capacity.
