Determination of ppt Level Chromium(VI) Using the Gold Nano-Flakes Electrodeposited on Platinum Rotating Disk Electrode and Modified with 4-Thiopyridinium

The nano-gold layer formed on the platinum rotating disk electrode (nano-Au/Pt-RD) inherited the catalytic property for Cr(VI) reduction from platinum surface and owned the good features of nano-gold such as insensitivity with hydrogen ion, high surface area, augmenting diffusion of Cr(VI) and ability for self-assembling with 4-pyridine-ethanethiol (PET) through Au←S linkages, to form PET/nano-Au/Pt-RD electrode capable of accumulating Cr(VI) from sample. The obtained PET/ nano-Au/Pt-RD electrode showed an extreme sensitivity to Cr(VI). By using this electrode, 1.09 ng·L﹣1 was the detection limit of differential pulse adsorptive cathodic stripping voltammetry for Cr(VI) with the accumulation time of only 2 min. Moreover, this electrode was reproducible with 3.5% RSD for 30 times of Cr(VI) accumulating and stripping. In addition, this electrode was also selective for Cr(VI) determination, which was not almost interfered by other inorganic ions.

Square Wave Voltammetry for Analytical Determination of Cadmium in Natural Water Using Ca10(PO4)6(OH)2-Modified Platinum Electrode

This paper reports on the development of a novel electrochemical assay for cadmium (II) in natural water, which involves the use of disposable hydroxyapatite modified platinum electrode (HAP/Pt). Cadmium (II) was preconcentrated on the surface of the modified electrode and adsorbed onto HAP and oxidized at E = –680 mV. The HAP-modified platinum electrode exhibited superior performance in comparison to the plati- num electrode and surprisingly, yielded a higher electrochemical response. The best defined anodic peak was obtained with 0.2 mol L-1 KNO3 pH 5.0 after 25 min of accumulation time. Using these conditions, the cali- bration plot was linear over the range 1 × 10?8 to 5 × 10?6 mol L-1 Cd2+. The precision was examined by car- rying out eight replicate measurements at a concentration of 2.5 ×10?5 mol L-1;the coefficient of variation was 2.9%. The method was applied to the determination of the analyte in river water samples. The interfere- ence of other metal ions on the voltammetric response of Cd(II) was studied. The HAP films was clearly ob- served in the SEM images and characterized by X-ray diffraction, IR spectroscopy and chemical analysis.

Two Types of Potential Oscillation During the Reduction of Dichromate on Gold Electrode in H2SO4 Solution

Two different types of potential oscillations have been identified for the first time during dichromate reduction on a gold electrode in a solution of dilute sulfuric acid. One occurs before hydrogen evolution due to the formation and dissolution of passivating films of low-valence chromium oxides, and the other generates, accompanying periodic hydrogen evolution, from the coupling of electrochemical reactions with diffusive and convective mass transport. More interestingly, these two types of oscillations correspond to two crossing loops in the cyclic voltammogram （CV）. Such a relation of oscillations with crossed CVs will provide a new way to find electrochemical oscillatory systems systematically and rapidly.

Preparation and Electrochemical Properties of Porous Platinum Electrode

Porous platinum electrodes were prepared by adding YSZ,as an active material,in platinum paste.Relationship between microstructure and electrochemical performance of O 2(g),Pt/YSZ electrode have been characterized by SEM and cyclic voltammetry.Results showed that the microstructure of platinum electrode is a significant impact on the cyclic voltammetry.With the increase of platinum electrode's porosity,the area of three-phase boundary of O 2(g) /Pt/YSZ was increased.The electrochemical reactivity was also enhanced.These were presented as the increase of current density and cathode voltage in cyclic voltammetry.

Electrochemical Behavior and Determination of Trifluoperazine at Decanethiol Self-Assembled Monolayer Modified Gold Electrodes

The electrochemical behavior of trifluoperazine at decanethiol self-assembledmonolayer (SAM) modified gold electrodes (i. e. C_(10) H_(21) SH/Au) has been studied,Trifluoperazine can effectively accumulate on C_(10) H_(21) SH/Au electrodes and generate asensitive anodic peak at about 0.63 V (vs. SCE) in 0.05 mol/L pH 9.4 Na_2 B_4 O_7 buffer solution.Under the selected conditions, the anodic peak current was linear to trifluoperazine concentrationin the range of 5.0 X 10^(-7)-3.O X 10^(-3) mol/Lwith correlation coefficient of 0.997, thedetection limit was 3.0 X 10^(-5) mol/L. This method was applied to the determination oftrifluoperazine in drug samples and the recovery was 97.3%-104.0% It was found that sodium dodecylsulfate (SDS) could make the anodic peak current increase. In the presence of SDS, the peak at about0.63 V turned into two peaks, resulting from the change of the electrochemical mechanism.

Copper modified platinum electrode for amperometric detection of spectinomycin sulfate by anion-exchange chromatography

A La^3＋-Cu/Pt modified electrode was fabricated by electrodepositing process in CuS04 solution by adding a small amount of lanthium compound, and it was employed for direct current （DC） amperometric detection of spectinomycin by anion-exchange chromatography. Without derivatization, this method can simultaneously determine the main component and impurities in spectinomycin pharmaceutical raw material. Ease of preparation, being applied in DC detection mode and good catalytic stability confirmed the interests of this modified electrode as amperometric sensor for the determination of spectinomycin.

Electrodeposition of Gold to Conformally Fill High-Aspect-Ratio Nanometric Silicon Grating Trenches: A Comparison of Pulsed and Direct Current Protocols

Filling high-aspect-ratio trenches with gold is a frequent requirement in the fabrication of X-ray optics as well as micro-electronic components and other fabrication processes. Conformal electrodeposition of gold in sub-micron-width silicon trenches with an aspect ratio greater than 35 over a grating area of several square centimeters is challenging and has not been described in the literature previously. A comparison of pulsed plating and constant current plating led to a gold electroplating protocol that reliably filled trenches for such structures.

Plastic supported platinum modified nickel electrode and its high electrocatalytic activity for sodium borohydride electrooxidation

A novel plastic/multi-walled carbon nanotube（MWNTs）-nickel（Ni）-platinum（Pt） electrode（PMNP） is prepared by chemical-reducing Pt onto the surface of Ni film covered plastic/MWNTs（PM） substrate. The MWNTs are adhered by a piece of commercial double faced adhesive tape on the surface of plastic paper and the Ni film is prepared by a simple electrodeposition method. The morphology and phase structure of the PMNP electrode are characterized by scanning electron microscopy,transmission electron microscope and X-ray diffractometer. The catalytic activity of the PMNP electrode for Na BH4 electrooxidation is investigated by means of cyclic voltammetry and chronoamperometry. The catalyst combines tightly with the plastic paper and exhibits a good stability. MWNTs serve as both conductive material and hydrogen storage material and the Ni film and Pt are employed as electrochemical catalysts. The PMNP electrode exhibits a high electrocatalytic performance and the oxidation current density reaches to 10.76 A/（mg·cm） in 0.1 mol/dm3 Na BH4at0 V,which is much higher than those in the previous reports. The using of waste plastic reduces the discarding of white pollution and consumption of metal resources.

The Study of Electrochemical Behavior of Dopamine at Nano-gold Modified Carbon Fiber Electrode

The electrochemical behaviors (cyclic voltammetry, CV and different pulse voltammetry, DPV) of dopamine (DA) were studied in this paper. The result indicated that the oxidation of dopamine was controlled by diffusion and adsorption simultaneously at nano-gold (NG) modified carbon fiber electrode (CFE). This modified electrode can separate the peak potentials of dopamine and ascorbic acid (AA). The peak current of DA in DPV curve was found to be linearly proportional to the concentration of DA at range of 2.0?0-6～1.5?0-5mol/L and 1.0?0-5～5.0?0-4mol/L, respectively.

Cyclic Voltammetry Determination of Epinephrine with a Nano-gold Modified Glassy Carbon Electrode in the Presence of High Concentration Ascorbic Acid

Nano-gold (NG) modified glassy carbon electrodes (GCEs) were used for determination of epinephrine (EP) in the presence of high concentration ascorbic acid (AA) by cyclic voltammetry (CV). This modified electrode can not only catalytically oxidize EP and AA, but also separate the catalytic peak potentials of EP and AA by about 183.5 mV. In pH = 7.0 ogisogate byffer solution, the linear range of epinephrine was 5 106 ~ 1 ?10-4 mol/L.

Anion Adsorption on an Au Colloid Monolayer Based Cysteamine-Modified Gold Electrode

Anion adsorption behavior on Au colloid surface was investigated in virture of depositing monolayers of Au colloid on the self-assembled monolayers of cysteamine on a gold electrode. Po- tential-dependent anion adsorption-desorption waves via the nonfaradaic current were obtained by means of cyclic voltammetry at Au coltoid-modified gold electrodes in the potential range of -2 00-600 mV. The adsorption sequence in the order of adsorption peak potentials (Epa) is OH- >citrate3 ->H2PO4- >Cl->SO42->ClO4->NO3-. Among them, citrate3- exhibited an en- tirely irreversible adsorption. A rise in temperature can increase the rates of adsorption-desorp- tion and improve the reversibility of the adsorption-desorption of Cl-, SO42-, ClO4-, NO3- and H2PO-4. The adsorption peak potentials shifted more negatively for Ca. 63 mV as the anion con- centrations were increased by a decade factor. The change of pH from 7 to 1 slightly affected the adsorption peak potentials of Cl- and NO3-. Au colloids with a smaller size (16 nm) gave rise to a better reversibility of the adsorption-desorption process and lower adsorption currents. The ex- perimental results of citrate ions adsorption on Au colloid surface show that Au colloids with a smaller size prepared by sodium citrate method exhibited a higher stability in the solution in com- parison to those with larger sizes because of its higher ratio of charge/mass. In other words, the smaller gold nanoparticles are covered with citrate ions monolayer that can also be formed at larg- er gold nanoparticles by means of electrochemical scan.

PRODUCTION OF THE PLATINUM ELECTRODE OF TANTALUM CLAD SILVER

This paper summarizes the production of the platinum electrode of tantalum clad silver. Ta(Ag). It clarifies the determination of the design parameters for the composite electrode, the technological process, the tensile test of the composite Ta(Ag) wire, the spotwelding of the electrode seal. the examination for leakage of the electrode. the prcess for winding the platinum foil and spotwelding, and the process parameter for obtaining high-quality electrodes during the production of 1,000 and more electrodes. The electrode produced satisfied the needs of the engineering design. It was demonstrated that the electrode had a long life-span and property stability, and fulfilled the norms for saving electricity and increasing production.

Direct Electrochemical Evidence of the Dissociation and Adsorption Behavior of Acetonitrile at Gold Electrodes by Ultrafast Voltammetry

Ultrafast cyclic voltammetry was used to study the redox behavior of a gold electrode in acetonitrile. The direct electrochemical evidence of the dissociation and adsorption behavior of acetonitrile at gold electrodes was found. It could be stated that two consecutive redox paths are involved, each with a special adsorption state acting as the reaction intermediate. The mean value, obtained of the electron-transfer rate constant of the second path, was 1.3 × 10^5 s^-1 with a standard deviation of 0.24 × 10^5 s^-1.

Voltammetric determination of uric acid by using gold nanotubule electrode

Gold nanotubule membranes were prepared by using electroless deposition of gold within the pores and surfaces of polycarbonate track-etched membranes. And the gold nanotubule membrane was used as an electrode for determination of uric acid in urine samples for the first time. In Britton–Robinson buffer of pH 4.56, uric acid exhibited well-defined differential pulse voltammograms. And the interference between coexistent ascorbic acid and uric acid was overcome owing to the attractive ability of the gold nanotubule electrode to yield a large anodic peak difference ca. 0.404 V (vs. SCE). The proposed method was then applied to the determination of uric acid in urine without any pretreatment.

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Colloid gold nanoparticle-based layer-by-layer amplification approach was applied to enhance the electrochemical detection sensitivity of DNA hybridization at carbon nanotube modified carbon paste electrodes （CNTPEs）. Streptavidin was immobilized onto the surface of CNTPEs, and the conjugation of biotin labeled target oligonucle,otides to the above immobilized streptavidin was performed, followed by the hybridization of target oligonucleotides with the gold nanoparticle-labeled DNA probe and then the layer-by-layer enhanced connection of gold nanoparticles, on which oligonucleotides complementary to the DNA probe were attached, to the hybridization system. The differential pulse voltammetry （DPV） signal of total gold nanoparticles was monitored. It was found that the layer-by-layer colloidal gold DPV detection enhanced the sensitivity by about one order of magnitude compared with that of one-layer detection. One-base mismatched DNA and complementary DNA could be distinguished clearly.

Tris(2,2'-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru（bpy）3^2＋ electrochemiluminescence （ECL） was applied to determination of rutin. ECL intensity of Ru（bpy）3^2＋ could be enhanced in the presence of rufin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50μmol/L.

Studies on the Gold-Coated Electrode with Grid

Introduction Thin-layer spectroelectrochemical method has many unique advantages, therefore this method has been widely applied and developed. Recently light transparent thinlayer spectroelectrochemical cells with various types of structures have been reported at home and abroad with gold or platinum minigrids as the working electrode in most of

Preparation and Characterization of Gold Thin Film Electrode Modified by Microbe

A novel method based on microbe modification has been employed to prepare gold thin film electrode. The preparation method is simple and the electrode obtained is stable and very sensitive in determining heavy metal ions. The quantitation limit of Cu2+ is 0.05 ng/mL.

Electrochemical Determination of Melamine on Static Mercury Drop Electrode and on Gold Nano Particle Modified Carbon Paste Electrode

An electrochemical method was developed for the determination of melamine (2,4,6 triamino- 1,3,5-triazine) on static mercury drop electrode (SMDE) and on gold nano particle modified carbon paste electrode. Interaction of melamine with Cu2﹢ ion was investigated and the decrease of Cu stripping peak was measured for the determination of melamine using SMDE. Oxidation property of melamine was improved using gold nano particle modified carbon paste electrode. Direct determination of melamine was proposed from the oxidation peak with three sigma detection limit of 0.43 μML﹣1. Recovery in milk powder sample has shown good recovery of melamine using the modified carbon paste electrode.

Reaction of erythromycin with dissolved oxygen on gold nanoparticle-modified glassy carbon electrodes

Cyclic voltammetry was used to investigate the reaction of erythromycin （EM） with dissolved oxygen on gold nanopartiele-modified electrodes prepared via electrodeposition. A well-defined reduction peak at -0.420 V and a reoxidation peak at -0.055 V were observed. With the addition of EM into the NaOH solution containing dissolved oxygen, the oxidation peak at -0.055 V was still indiscernible. However, a new oxidation peak at 0.200 V appeared, which suggests the interaction between EM and dissolved oxygen. Therefore, this method can be used for the analysis of EM in tablets. The present method is simple, reproducible, and does not require complex analytical instruments.