Bimetallic In_(2)O_(3)/Bi_(2)O_(3) Catalysts Enable Highly Selective CO_(2) Electroreduction to Formate within Ultra-Broad Potential Windows

CO_(2)electrochemical reduction reaction(CO_(2)RR)to formate is a hopeful pathway for reducing CO_(2)and producing high-value chemicals,which needs highly selective catalysts with ultra-broad potential windows to meet the industrial demands.Herein,the nanorod-like bimetallic ln_(2)O_(3)/Bi_(2)O_(3)catalysts were successfully synthesized by pyrolysis of bimetallic InBi-MOF precursors.The abundant oxygen vacancies generated from the lattice mismatch of Bi_(2)O_(3)and ln_(2)O_(3)reduced the activation energy of CO_(2)to*CO_(2)·^(-)and improved the selectivity of*CO_(2)·^(-)to formate simultaneously.Meanwhile,the carbon skeleton derived from the pyrolysis of organic framework of InBi-MOF provided a conductive network to accelerate the electrons transmission.The catalyst exhibited an ultra-broad applied potential window of 1200 mV(from-0.4 to-1.6 V vs RHE),relativistic high Faradaic efficiency of formate(99.92%)and satisfactory stability after 30 h.The in situ FT-IR experiment and DFT calculation verified that the abundant oxygen vacancies on the surface of catalysts can easily absorb CO_(2)molecules,and oxygen vacancy path is dominant pathway.This work provides a convenient method to construct high-performance bimetallic catalysts for the industrial application of CO_(2)RR.

Elucidating the structure-activity relationship of Cu-Ag bimetallic catalysts for electrochemical CO_(2) reduction

Developing bimetallic catalysts is an effective strategy for enhancing the activity and selectivity of electrochemical CO_(2) reduction reactions,where understanding the structure-activity relationship is essential for catalyst design.Herein,we prepared two Cu-Ag bimetallic catalysts with Ag nanoparticles attached to the top or the bottom of Cu nanowires.When tested in a flow cell,the Cu-Ag catalyst with Ag nanoparticles on the bottom achieved a faradaic efficiency of 54%for ethylene production,much higher than the catalyst with Ag nanoparticles on the top.The catalysts were further studied in the H-cell and zero-gap MEA cell.It was found that placing the two metals in the intensified reaction zone is crucial to triggering the tandem reaction of bimetallic catalysts.Our work elucidates the structure-activity relationship of bimetallic catalysts for CO_(2) reduction and demonstrates the importance of considering both catalyst structures and cell characteristics to achieve high activity and selectivity.

Bimetallic CoNi single atoms supported on three-dimensionally ordered mesoporous chromia:highly active catalysts for n-hexane combustion

Developing the alternative supported noble metal catalysts with low cost,high catalytic efficiency,and good resistance toward carbon dioxide and water vapor is critically demanded for the oxidative removal of volatile organic compounds(VOCs).In this work,we prepared the mesoporous chromia-supported bimetallic Co and Ni single-atom(Co_(1)Ni_(1)/meso-Cr_(2)O_(3))and bimetallic Co and Ni nanoparticle(Co_(NP)Ni_(NP)/mesoCr_(2)O_(3))catalysts adopting the one-pot polyvinyl pyrrolidone(PVP)-and polyvinyl alcohol(PVA)-protecting approaches,respectively.The results indicate that the Co_(1)Ni_(1)/meso-Cr_(2)O_(3)catalyst exhibited the best catalytic activity for n-hexane(C_(6)H_(14))combustion(T_(50%)and T_(90%)were 239 and 263℃ at a space velocity of 40,000 mL g^(-1)h^(-1);apparent activation energy and specific reaction rate at 260℃ were 54.7 kJ mol^(-1)and 4.3×10^(-7)mol g^(-1)_(cat)s^(-1),respectively),which was associated with its higher(Cr^(5+)+Cr^(6+))amount,large n-hexane adsorption capacity,and good lattice oxygen mobility that could enhance the deep oxidation of n-hexane,in which Ni_(1) was beneficial for the enhancements in surface lattice oxygen mobility and low-temperature reducibility,while Co_(1) preferred to generate higher contents of the high-valence states of chromium and surface oxygen species as well as adsorption and activation of n-hexane.n-Hexane combustion takes place via the Mars van Krevelen(MvK)mechanism,and its reaction pathways are as follows:n-hexane→olefins or 3-hexyl hydroperoxide→3-hexanone,2-hexanone or 2,5-dimethyltetrahydrofuran→2-methyloxirane or 2-ethyl-oxetane→acrylic acid→CO_x→CO_(2)and H_(2)O.

Effect of manganese on the catalytic performance of an iron-manganese bimetallic catalyst for light olefin synthesis

A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst samples were characterized by N2 physisorption, transmis- sion electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS）, powder X-ray diffraction （XRD）, Mossbauer spectroscopy, H2- differential thermogravimetric analysis （H2-DTG）, CO temperature-programmed reduction （CO-TPR） and CO2 temperature-programmed des- orption （CO2-TPD）. The Fischer-Tropsch synthesis （FTS） performance of the catalyst was measured at 1.5 MPa, 250 ℃ and syngas with H2/CO ratio of 2.0. The characterization results indicated that the addition of manganese decreases the catalyst crystallite size, and improves the catalyst BET surface area and pore volume. The presence of manganese suppresses the catalyst reduction and carburization in H2, CO and syngas, respectively. The addition of manganese improves the catalytic activity of water-gas shift reaction and suppresses the oxidation of iron carbides in the FTS reaction. The incorporation of manganese improves the catalyst surface basicity and results in a significant improvement in the selectivities to light olefins and heavy hydrocarbons （C5＋）, and furthermore an inhibition of methane formation in FTS. The pure iron catalyst （Mn-00） has the highest initial FTS catalytic activity （65%） and the lowest selectivity （17.35 wt%） to light olefins （C2=-C4=）. The addition of an appropriate amount of manganese can improve the catalyst FTS activity.

Highly effective direct synthesis of DMC from CH_3OH and CO_2 using novel Cu-Ni/C bimetallic composite catalysts

Novel Cu-Ni/C has been prepared and utilized as an efficient catalyst system in direct synthesis of DMC from CH3OH and CO2.

Hydrogenation of 2‐ethylanthraquinone with bimetallic monolithic catalysts: An experimental and DFT study

We studied the hydrogenation of 2‐ethylanthraquinone（eAQ） over Pd/SiO2/COR（COR = cordierite） monometallic and Pd‐M/SiO2/COR（M = Ni, Fe, Mn, and Cu） bimetallic monolithic catalysts, which were prepared by the co‐impregnation method. Detailed investigations showed that the particle sizes and structures of the Pd‐M（M = Ni, Fe, Mn, and Cu） bimetallic monolithic catalysts were great‐ly affected by the second metal M and the mass ratio of Pd to the second metal M. By virtue of the small particle size and the strong interaction between Pd and Ni of Pd‐Ni alloy, Pd‐Ni bimetallic monolithic catalysts with the mass ratio of Pd/Ni = 2 achieved the highest H2O2 yield（7.5 g/L） and selectivity（95.3%）. Moreover, density functional theory calculations were performed for eAQ ad‐sorption to gain a better mechanistic understanding of the molecule‐surface interactions between eAQ and the Pd（1 1 1） or PdM（1 1 1）（M = Ni, Fe, Mn, and Cu） surfaces. It was found that the high activity of the bimetallic Pd‐Ni catalyst was a result of strong chemisorption between Pd3Ni1（1 1 1） and the carbonyl group of eAQ.

Effects of the Different Supports on the Activity and Selectivity of Iron-Cobalt Bimetallic Catalyst for Fischer-Tropsch Synthesis

Silica, alumina, and activated carbon supported iron-cobalt catalysts were prepared by incipient wetness impregnation. These catalysts have been characterized by BET, X-ray diffraction （XRD）, and temperature-programmed reduction （TPR）. Activity and selectivity of iron-cobalt supported on different carriers for CO hydrogenation were studied under the conditions of 1.5 MPa, 493 K, 630 h^-1, and H2/CO ratio of 1.6. The results indicate that the activity, C4 olefin/（C4 olefin＋C4 paraffin） ratio, and C5 olefin/（C5 olefin＋C5 paraffin） decrease in the order of Fe-Co/SiO2, Fe-Co/AC1, Fe-Co/Al2O3 and Fe- Co/AC2. The activity of Fe-Co/SiO2 reached a maximum. The results of TPR show that the Fe-Co/SiO2 catalyst is to some extent different. XRD patterns show that the Fe-Co/SiO2 catalyst differs significantly from the others; it has two diffraction peaks. The active spinel phase is correlated with the supports.

SiO_2-supported Au-Ni bimetallic catalyst for the selective hydrogenation of acetylene

Supported Au catalysts have been reported to exhibit high ethylene selectivity in the hydrogenation of acetylene,but the conversion is relatively low.Adding a second metal to Au has proven to be a promising approach to enhance its catalytic performance in acetylene hydrogenation.In this work,SiO2‐supported Au‐Ni bimetallic catalysts were synthesized and investigated in the selective hydrogenation of acetylene.The Au‐Ni bimetallic catalysts exhibited much higher catalytic performance than that of the corresponding monometallic Au or Ni catalysts.By tuning the reduction temperature and/or Ni loading,we obtained an Au‐Ni/SiO2catalyst with optimal performance.The results of transmission electron microscopy imaging revealed that the Au‐Ni bimetallic particles were highly dispersed on the SiO2support.Meanwhile,analysis of the bimetallic catalyst by energy‐dispersive X‐ray spectroscopy,high‐resolution transmission electron microscopy,and in situ diffuse reflectance infrared Fourier transform spectroscopy demonstrated the formation of Au‐Ni alloy,which contributed to the synergistic effect between Au and Ni in the hydrogenation of acetylene.

PVP-Supported Palladium-Cadmium Bimetallic Catalyst for the Hydrogen Transfer Dechlorination of Aryl Chlorides

PVP-supported bimetallic catalyst, PVP-PdCl2-CdCl2, exhibits extremely high catalytic activity for the hydrogen transfer dechlorination of aryl chlorides in neutral environment. The yields of dechlorination products are high under mild reaction conditions and the operation is simple.

An efficient and reusable bimetallic Ni_3Fe NPs@C catalyst for selective hydrogenation of biomass-derived levulinic acid toγ-valerolactone

Bimetallic nanostructures have attracted great interest as efficient catalyst to enhance activity,selectivity and stability in catalytical conversion.Herein,we report a facile one‐pot carbothermal route to in‐situ controllable synthesize heterogeneous bimetallic Ni3Fe NPs@C nanocatalyst.The X‐ray diffraction,transmission electron microscopy,X‐ray photoelectron spectroscopy and N2 adsorption‐description results reveal that the Ni3Fe alloy nanoparticles are evenly embedded in carbon matrix.The as‐prepared Ni3Fe NPs@C catalyst shows excellent selective hydrogenation catalytic performance toward the conversion of levulinic acid(LA)toγ‐valerolactone(GVL)via both direct hydrogenation(DH)and transfer hydrogenation(TH).In DH of LA,the bimetallic catalyst achieved a 93.8%LA conversion efficiency with a 95.5%GVL selectivity and 38.2 mmol g–1 h–1 GVL productivity(under 130°C,2MPa H2 within 2 h),which are 6 and 40 times in comparison with monometallic Ni NPs@C and Fe NPs@C catalysts,respectively.In addition,the identical catalyst displayed a full conversion of LA with almost 100%GVL selectivity and 167.1 mmol g–1 h–1 GVL productivity at 180°C within 0.5 h in TH of LA.Under optimal reaction conditions,the DH and TH catalytic performance of 500‐Ni3Fe NPs@C(3:1)catalyst for converting LA to GVL is comparable to the state‐of‐the‐art noble‐based catalysts.The demonstrated capability of bimetallic catalyst design approach to introduce dual‐catalytic functionality for DH and TH reactions could be adoptable for other catalysis processes.

Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

A non-phosgene route for the synthesis of hexamethylene-1,6-diisocyanate(HDI) was developed via catalytic decomposition of hexamethylene-1,6-dicarbamate(HDC) over Zn–Co bi-metallic supported ZSM-5 catalyst.The catalyst was characterized by FTIR and XRD analyses. Three solvents dioctyl sebacate(DOS), dibutyl sebacate(DBS) and 1-butyl-3-methylimidazolium tetrafluoroborate(BMIMBF_4) were investigated and compared; DOS gave better performance. The catalytic performances for thermal decomposition of HDC to HDI using DOS as solvent were then investigated, and the results showed that, under the optimized reaction conditions, i.e.,10 wt%concentration of HDC in DOS, 250 °C temperature, 60 min reaction time, 83.8% yield of HDI had been achieved over Zn–Co/ZSM-5. Decomposition of the intermediate hexamethylene-1-carbamate-6-isocyanate(HMI) over Zn–Co/ZSM-5 in DOS solvent was further studied and the results indicated that yield of HDI from HMI reached to 69.6%(98.6% HDI selectively) at 270 °C, which further increased the yield of the total HDI(HDI_(tol)) to as high as 95.0%. Recycling of catalyst showed that HDI and HMI yield slightly decreased, and by-product yield increased after the catalyst was reused for 4 times. At last possible reaction mechanism was proposed.

Pt-Re/rGO bimetallic catalyst for highly selective hydrogenation of cinnamaldehyde to cinnamylalcohol

In the present work, a series of Pt-based catalysts, alloyed with a second metal, i.e., Re, Sn, Er, La, and Y, and supported on activated carbon, ordered mesoporous carbon, N-doped mesoporous carbon or reduced graphene oxide(rGO), have been developed for selective hydrogenation of cinnamaldehyde to cinnamylalcohol. Re and rGO were proved to be the most favorable metal dopant and catalyst support, respectively. Pt_(50) Re_(50)/rGO showed the highest cinnamylalcohol selectivity of 89% with 94% conversion of cinnamaldehyde at the reaction conditions of 120 °C, 2.0 MPaH_2 and 4 h.

Advancements in transition bimetal catalysts for electrochemical 5-hydroxymethylfurfural(HMF) oxidation

The electrochemical oxidation of 5-hydroxymethylfurfural(HMF) represents a significant avenue for sustainable chemical synthesis, owing to its potential to generate high-value derivatives from biomass feedstocks. Transition metal catalysts offer a cost-effective alternative to precious metals for catalyzing HMF oxidation, with transition bimetallic catalysts emerging as particularly promising candidates. In this review, we delve into the intricate reaction pathways and electrochemical mechanisms underlying HMF oxidation, emphasizing the pivotal role of transition bimetallic catalysts in enhancing catalytic efficiency. Subsequently, various types of transition bimetallic catalysts are explored, detailing their synthesis methods and structural modulation strategies. By elucidating the mechanisms behind catalyst modification and performance enhancement, this review sets the stage for upcoming advancements in the field, ultimately advancing the electrochemical HMF conversion and facilitating the transition towards sustainable chemical production.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

The electroreduction reaction of CO_(2)(ECO_(2)RR)requires high-performance catalysts to convert CO_(2)into useful chemicals.Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO_(2)RR.This work presents a series of atomically dispersed Co,Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework(C-Fe-Co-ZIF)for the syngas generation from ECO_(2)RR.The synergistic effect of the bimetallic catalyst promotes CO production.Compared to the pure C-Co-ZiF,C-Fe-Co-ZIF facilitates CO production with a CO Faradaic efficiency(FE)boost of 10%,with optimal FE_(CO)of 51.9%,FE_(H_(2))of 42.4%at-0.55 V,and CO current density of 8.0 mA cm^(-2)at-0.7 V versus reversible hydrogen electrode(RHE).The H_(2)/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of-0.35 to-0.8 V versus RHE.The total FE_(CO+H_(2))maintains as high as 93%over 10 h.The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe,which is essential for the enhancement of the CO production in ECO_(2)RR.The positive impacts of Cu-Co and Ni-Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO_(2)RR.

Boosting the hydrogen storage performance of magnesium hydride with metal organic framework-derived Cobalt@Nickel oxide bimetallic catalyst

In this study,a MOF-derived bimetallic Co@NiO catalyst was synthesized and doped into MgH_(2)to improve the hydrogen desorption and resorption kinetics.The Co@NiO catalyst decreased the onset dehydrogenation temperature of MgH_(2)by 160℃,compared with un-doped MgH_(2).The MgH^(2+)9%(mass)Co@NiO composite released 6.6%(mass)hydrogen in 350 s at 315℃and uptook 5.4%(mass)hydrogen in500 s at 165℃,showing greatly accelerated de/rehydrogenation rates.Besides,the desorption activation energy of MgH^(2+)9%(mass)Co@NiO was decreased to(93.8±8.4)kJ·mol^(-1).Noteworthy,symbiotic Mg_(2)NiH_(4)/Mg_(2)CoH_(5)clusters were in-situ formed from bimetallic precursors and inlaid on MgH_(2)surface,which are considered as"multi-step hydrogen pumps",and provides surface pathways for hydrogen absorption.Meanwhile,the introduced Mg_(2)NiH_(4)/Mg_(2)CoH_(5)interfaces could provide numerous low energy barrier H diffusion channels,therefore accelerating the hydrogen release and uptake.This research proposes new insights to design high-efficiency bimetallic catalyst for MgH_(2)hydrogen storage.

Long-range electron synergy over Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst in enhancing charge separation for photocatalytic hydrogen production

The development of novel single-atom catalysts with optimal electron configuration and economical noble-metal cocatalyst for efficient photocatalytic hydrogen production is of great importance,but still challenging.Herein,we fabricate Pt and Co single-atom sites successively on polymeric carbon nitride(CN).In this Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst,the noble-metal active sites are maximized,and the single-atomic Co_(1)N_4sites are tuned to Co_(1)N_3sites by photogenerated electrons arising from the introduced single-atomic Pt_(1)N_4sites.Mechanism studies and density functional theory(DFT)calculations reveal that the 3d orbitals of Co_(1)N_3single sites are filled with unpaired d-electrons,which lead to the improved visible-light response,carrier separation and charge migration for CN photocatalysts.Thereafter,the protons adsorption and activation are promoted.Taking this advantage of long-range electron synergy in bimetallic single atomic sites,the photocatalytic hydrogen evolution activity over Pt_(1)-Co_(1)/CN achieves 915.8 mmol g^(-1)Pt h^(-1),which is 19.8 times higher than Co_(1)/CN and 3.5 times higher to Pt_(1)/CN.While this electron-synergistic effect is not so efficient for Pt nanoclusters.These results demonstrate the synergistic effect at electron-level and provide electron-level guidance for the design of efficient photocatalysts.

Reverse Microemulsion Synthesis and Characterization of Pd-Ag Bimetallic Alloy Catalysts Supported on Al_2O_3 for Acetylene Hydrogenation

Pd-Ag bimetallic alloy nanoparticles were synthesized by the reverse microemulsion method, and then deposited on A1203 to form the supported catalyst. The nanoparticles of Pd-Ag and Pd-Ag/AI203 samples were characterized by UV/ Vis, HRTEM, EDX, XRD, and XPS. The test results indicated that Pd-Ag bimetallic alloy nanoparticles with a size of about 2 nm and a face-centered cubic （fcc） structure were formed in the measured area of microemulsion. The growth of nanopar- ticles was effectively limited within the droplet of micoremulsion. TEM image exhibited that the Pd-Ag alloy nanoparticles were well-dispersed on the A1203 support. The catalytic performance of various catalysts for selective hydrogenation of acetylene showed that a higher acetylene conversion and selectivity to ethylene upon acetylene hydrogenation was achieved on a nano-sized Pd-Ag bimetallic catalyst with a Pd/Ag alloy supported molar ratio of 1：1.5.

Synergistic effects of bimetallic Cu-Fe/SiO_2 nanocatalysts in selective hydrogenation of diethyl malonate to 1,3-propanediol

Cu-x-Fe-y/SiO2 catalysts were prepared using urea-assisted sol-gel method. The structure and physicochemical properties of the catalysts were characterized using N-2 adsorption-desorption, transmission electron microscopy, H-2-temperature-programmed reduction, powder X-ray diffraction, and X-ray photoelectron spectroscopy. Compared with monometallic Cu or Fe catalysts, the bimetallic Cu-x-Fe-y/SiO2 catalysts exhibited enhanced catalytic performance for the selective hydrogenation of diethyl malonate to 1,3-propanediol. The bimetallic catalyst with an optimal Cu/Fe atomic ratio of 2 exhibited the highest activity, which yielded 96.3% conversion to diethyl malonate and 93.3% selectivity to 1,3-propanediol under the optimal reaction conditions. Characterization results revealed that interactions between Cu and Fe contributed to the improvement of diethyl malonate conversion and selectivity to 1,3-propanediol. The X-ray photoelectron spectroscopy results revealed that the addition of appropriate amount of Fe species enhanced the reduction of Cu2+ species, thereby increasing the Cu-0 species on the surface of bimetallic catalyst. It led to a better chemisorption capacity of hydrogen and further promoted of the activation of hydrogen molecule. The ethyl acetate temperature-programmed desorption results indicated that the FeOx species provided the additional adsorption sites for substrate molecules, and they activated the C=O bond. The improved catalytic performance of bimetallic Cu-x-Fe-y/SiO2 catalyst was mainly attributed to the synergistic effect between Cu-0 and FeOx species. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Base-free aerobic oxidation of glycerol on TiO_2-supported bimetallic Au–Pt catalysts

The aerobic oxidation of glycerol provides an economically viable route to glyceraldehyde, dihydroxyacetone and glyceric acid with versatile applications, for which monometallic Pt, Au and Pd and bimetallic Au-Pt, Au- Pd and Pt-Pd catalysts on TiO2 were examined under base-free conditions. Pt exhibited a superior activity relative to Pd, and Au-Pd and Pt-Pd while Au was essentially inactive. The presence of Au on the Au-Pt/TiO2 catalysts led to their higher activities （normalized per Pt atom） in a wide range of Au/Pt atomic ratios （i.e. 1/3-7/1 ）, and the one with the Au/Pt ratio of 3/1 exhibited the highest activity. Such promoting effect is ascribed to the increased electron density on Pt via the electron transfer from Au to Pt, as characterized by the temperature-programmed desorption of CO and infra-red spectroscopy for CO adsorption. Meanwhile, the presence of Au on Au-Pt/TiO2, most like due to the observed electron transfer, changed the product selectivity, and facilitated the oxidation of the secondary hydroxyl groups in glycerol, leading to the favorable formation of dihydroxyacetone over glyceraldehyde and glyceric acid that were derived from the oxidation of the primary hydroxyl groups. The synergetic effect between Au and Pt demonstrates the feasibility in the efficient oxidation of glycerol to the targeted products, for example, by rational tuning of the electronic properties of metal catalysts.

In-situ constructing Cu_(1)Bi_(1)bimetallic catalyst to promote the electroreduction of CO_(2)to formate by synergistic electronic and geometric effects

Electrochemical CO_(2)reduction to formate is a potential approach to achieving global carbon neutrality.Here,Cu1Bi1bimetallic catalyst was prepared by a co-precipitation method.It has a ginger like composite structure(CuO/CuBi_(2)O_(4))and exhibited a high formate faradaic efficiency of 98.07%at–0.98 V and a large current density of–56.12 mA.cm^(-2)at–1.28 V,which is twice as high as Bi2O3catalyst.Especially,high selectivity(FE^(–)_(HCOO)>85%)is maintained over a wide potential window of 500 mV.In-situ Raman measurements and structure characterization revealed that the reduced Cu1Bi1bimetallic catalyst possesses abundant Cu-Bi interfaces and residual Bi-O structures.The abundant Cu-Bi interface structures on the catalyst surface can provide abundant active sites for CO_(2)RR,while the Bi-O structures may stabilize the CO_(2)^(*–)intermediate.The synergistic effect of abundant Cu-Bi interfaces and Bi-O species promotes the efficient synthesis of formate by following the OCHO^(*)pathway.