An efficient culture medium producing a bacterial elastase with high yields was developed further following preliminary studies by means of response surface method. Central composite design (CCD) and response surface ...An efficient culture medium producing a bacterial elastase with high yields was developed further following preliminary studies by means of response surface method. Central composite design (CCD) and response surface methodology were applied to optimize the medium constituents. A central composite design was used to explain the combined effect of three medium constituents, viz, glucose, K2HPO4, MgSO4·7H2O. The strain produced more elastase in the completely optimized medium, as compared with the partially optimized medium. The fitted model of the second model, as per RSM, showed that glucose was 7.4 g/100 ml, casein 1.13 g/100 ml, corn steep flour 0.616 g/100 ml, KEHPO4 0.206 g/100 ml and MgSO4·7H2O 0.034 g/100 ml. The fermentation kinetics of these two culture media in the flask experiments were analyzed. It was found that the highest elastase productivity occurred at 54 hours. Higher glucose concentration had inhibitory effect on elastase production. At the same time, we observed that the glucose consumption rate was slow in the completely optimized medium, which can explain the lag period of the highest elastase production. Some metal ions and surfactant additives also affected elastase production and cell growth.展开更多
Anti-lipopolysaccharide factors (ALFs) are important antimicrobial peptides that are isolated from some aquatic species. In a previous study, we isolated ALF genes from Chinese mitten crab, Eriocheir sinensis. In this...Anti-lipopolysaccharide factors (ALFs) are important antimicrobial peptides that are isolated from some aquatic species. In a previous study, we isolated ALF genes from Chinese mitten crab, Eriocheir sinensis. In this study, we optimized the production of a recombinant ALF by expressing E. sinensis ALF genes in Escherichia coli maintained in shake-flasks. In particular, we focused on optimization of both the medium composition and the culture condition. Various medium components were analyzed by the Plackett-Burman design, and two significant screened factors, (NH4)2SO4 and KH2PO4, were further optimized via the central composite design (CCD). Based on the CCD analysis, we investigated the induction start-up time, the isopropylthio-D-galactoside (IPTG) concentration, the post-induction time, and the temperature by response surface methodology. We found that the highest level of ALF fusion protein was achieved in the medium containing 1.89 g/L (NH4)2SO4 and 3.18 g/L KH2PO4, with a cell optical density of 0.8 at 600 nm before induction, an IPTG concentration of 0.5 mmol/L, a post-induction temperature of 32.7°C, and a post-induction time of 4 h. Applying the whole optimization strategy using all optimal factors improved the target protein content from 6.1% (without optimization) to 13.2%. We further applied the optimized medium and conditions in high cell density cultivation, and determined that the soluble target protein constituted 10.5% of the total protein. Our identification of the economic medium composition, optimal culture conditions, and details of the fermentation process should facilitate the potential application of ALF for further research.展开更多
Harmful algal blooms(HABs) have led to extensive ecological and environmental issues and huge economic losses.Various HAB control techniques have been developed,and biological methods have been paid more attention.Alg...Harmful algal blooms(HABs) have led to extensive ecological and environmental issues and huge economic losses.Various HAB control techniques have been developed,and biological methods have been paid more attention.Algicidal bacteria is a general designation for bacteria which inhibit algal growth in a direct or indirect manner,and kill or damage the algal cells.A metabolite which is strongly toxic to the dinoflagellate Alexandrium tamarense was produced by strain DH46 of the alga-lysing bacterium Alteromonas sp.The culture conditions were optimized using a single-factor test method.Factors including carbon source,nitrogen source,temperature,initial pH value,rotational speed and salinity were studied.The results showed that the cultivation of the bacteria at 28℃ and 180 r min-1with initial pH 7 and 30 salt contcentration favored both the cell growth and the lysing effect of strain DH46.The optimal medium composition for strain DH46 was determined by means of uniform design experimentation,and the most important components influencing the cell density were tryptone,yeast extract,soluble starch,NaNO3 and MgSO4.When the following culture medium was used(tryptone 14.0g,yeast extract 1.63g,soluble starch 5.0 g,NaNO3 1.6 g,MgSO4 2.3 g in 1L),the largest bacterial dry weight(7.36 g L-1) was obtained,which was an enhancement of 107% compared to the initial medium;and the algal lysis rate was as high as 98.4% which increased nearly 10% after optimization.展开更多
[Objectives] This study was conducted to further improve the application of Oenococcus oeni in the wine brewing industry. [Methods] O. oeni was isolated, screened, and identified, and medium optimization was performed...[Objectives] This study was conducted to further improve the application of Oenococcus oeni in the wine brewing industry. [Methods] O. oeni was isolated, screened, and identified, and medium optimization was performed to determine the best medium, temperature and oxygen conditions. [Results] O. oeni grew better in mFT80 medium, and the culture conditions were 25 ℃ and an anaerobic condition. [Conclusions] This study provides a reference for the development of China’s wine industry.展开更多
文摘An efficient culture medium producing a bacterial elastase with high yields was developed further following preliminary studies by means of response surface method. Central composite design (CCD) and response surface methodology were applied to optimize the medium constituents. A central composite design was used to explain the combined effect of three medium constituents, viz, glucose, K2HPO4, MgSO4·7H2O. The strain produced more elastase in the completely optimized medium, as compared with the partially optimized medium. The fitted model of the second model, as per RSM, showed that glucose was 7.4 g/100 ml, casein 1.13 g/100 ml, corn steep flour 0.616 g/100 ml, KEHPO4 0.206 g/100 ml and MgSO4·7H2O 0.034 g/100 ml. The fermentation kinetics of these two culture media in the flask experiments were analyzed. It was found that the highest elastase productivity occurred at 54 hours. Higher glucose concentration had inhibitory effect on elastase production. At the same time, we observed that the glucose consumption rate was slow in the completely optimized medium, which can explain the lag period of the highest elastase production. Some metal ions and surfactant additives also affected elastase production and cell growth.
基金Supported by the National High Technology Research and Development Program of China(863 Program)(No.2006AA100311)
文摘Anti-lipopolysaccharide factors (ALFs) are important antimicrobial peptides that are isolated from some aquatic species. In a previous study, we isolated ALF genes from Chinese mitten crab, Eriocheir sinensis. In this study, we optimized the production of a recombinant ALF by expressing E. sinensis ALF genes in Escherichia coli maintained in shake-flasks. In particular, we focused on optimization of both the medium composition and the culture condition. Various medium components were analyzed by the Plackett-Burman design, and two significant screened factors, (NH4)2SO4 and KH2PO4, were further optimized via the central composite design (CCD). Based on the CCD analysis, we investigated the induction start-up time, the isopropylthio-D-galactoside (IPTG) concentration, the post-induction time, and the temperature by response surface methodology. We found that the highest level of ALF fusion protein was achieved in the medium containing 1.89 g/L (NH4)2SO4 and 3.18 g/L KH2PO4, with a cell optical density of 0.8 at 600 nm before induction, an IPTG concentration of 0.5 mmol/L, a post-induction temperature of 32.7°C, and a post-induction time of 4 h. Applying the whole optimization strategy using all optimal factors improved the target protein content from 6.1% (without optimization) to 13.2%. We further applied the optimized medium and conditions in high cell density cultivation, and determined that the soluble target protein constituted 10.5% of the total protein. Our identification of the economic medium composition, optimal culture conditions, and details of the fermentation process should facilitate the potential application of ALF for further research.
基金financially supported by the National Natural Science Foundation(40930847,31070442)the Natural Science Foundation of Fujian Province(2012J01150)Public science and technology research funds projects of ocean(201305016,201305041,201305022) and MELRI1003
文摘Harmful algal blooms(HABs) have led to extensive ecological and environmental issues and huge economic losses.Various HAB control techniques have been developed,and biological methods have been paid more attention.Algicidal bacteria is a general designation for bacteria which inhibit algal growth in a direct or indirect manner,and kill or damage the algal cells.A metabolite which is strongly toxic to the dinoflagellate Alexandrium tamarense was produced by strain DH46 of the alga-lysing bacterium Alteromonas sp.The culture conditions were optimized using a single-factor test method.Factors including carbon source,nitrogen source,temperature,initial pH value,rotational speed and salinity were studied.The results showed that the cultivation of the bacteria at 28℃ and 180 r min-1with initial pH 7 and 30 salt contcentration favored both the cell growth and the lysing effect of strain DH46.The optimal medium composition for strain DH46 was determined by means of uniform design experimentation,and the most important components influencing the cell density were tryptone,yeast extract,soluble starch,NaNO3 and MgSO4.When the following culture medium was used(tryptone 14.0g,yeast extract 1.63g,soluble starch 5.0 g,NaNO3 1.6 g,MgSO4 2.3 g in 1L),the largest bacterial dry weight(7.36 g L-1) was obtained,which was an enhancement of 107% compared to the initial medium;and the algal lysis rate was as high as 98.4% which increased nearly 10% after optimization.
文摘[Objectives] This study was conducted to further improve the application of Oenococcus oeni in the wine brewing industry. [Methods] O. oeni was isolated, screened, and identified, and medium optimization was performed to determine the best medium, temperature and oxygen conditions. [Results] O. oeni grew better in mFT80 medium, and the culture conditions were 25 ℃ and an anaerobic condition. [Conclusions] This study provides a reference for the development of China’s wine industry.