As thiourea and sulfur-containing mixed additives contaminate cathodic copper,inhibition behavior of some new mixed additives such as gelatin+hexadecylpyridinium bromide (HDPBr),gelatin+polyethylene glycol(PEG),gelati...As thiourea and sulfur-containing mixed additives contaminate cathodic copper,inhibition behavior of some new mixed additives such as gelatin+hexadecylpyridinium bromide (HDPBr),gelatin+polyethylene glycol(PEG),gelatin+polyacryl amide (PAM),gelatin+PEG+cetyl-tri-methyl ammonium bromide (CTABr) and gelatin+PAM+CTABr was investigated by cyclic voltammetry as well as cathodic polarization in order to improve the quality of cathodic copper in bio-metallurgical process.The results indicate that the inhibition performances of these additives are dependent on complex and adsorption behaviors as well as the deposit potential.For a solution of acidic copper sulpate containing 40 g/L Cu2+ and 180 g/L H2SO4,the additive (gelatin+HDPBr) is the most efficient among the investigated additives because HDPBr with a large organic cation and π electron can adsorb on the cathodic surface to block the active sites and Br-ion can precipitate Cu2+ to form Cu2Br2.The additive (gelatin+PAM) also has a better inhibition performance,while the additives (gelatin+PEG),(gelatin+PEG+CTABr) and (gelatin+PAM+CTABr) are comparatively lower inhibition performance compared with the additive (gelatin+thiourea) which has been frequently used so far.展开更多
Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such mat...Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.展开更多
The esterifications of 9-（hydroxyimino）-4-methyl-8,9-dihydrofuro[2,3-h]chromen-2-one （4） with acid chlorides afforded normal oxime-esters 3a-e in 35-78% yields in presence of excessive 4-dimethylaminopyridine as t...The esterifications of 9-（hydroxyimino）-4-methyl-8,9-dihydrofuro[2,3-h]chromen-2-one （4） with acid chlorides afforded normal oxime-esters 3a-e in 35-78% yields in presence of excessive 4-dimethylaminopyridine as the acid scavenger, whereas the reactions gave unexpected 8-substituted products N-（8-chloro-4-methyl-2-oxo-2H-furo-[2,3-h]chromen-9-yl）amides （5a-c） and 4-methyl-2,9-dioxo-8,9-dihydro-2H-furo[2,3-h]chromen-8-ylcarboxyloates （6d-e） by using excessive acid chlorides. The structures of 10 new compounds were determined by 1H NMR, 13C NMR, MS and HRMS, and the possible mechanism for the formation of unexpected products 5a--c and 6d-e was also proposed.展开更多
基金Project(2004CB619200) supported by the National Basic Research Program of China
文摘As thiourea and sulfur-containing mixed additives contaminate cathodic copper,inhibition behavior of some new mixed additives such as gelatin+hexadecylpyridinium bromide (HDPBr),gelatin+polyethylene glycol(PEG),gelatin+polyacryl amide (PAM),gelatin+PEG+cetyl-tri-methyl ammonium bromide (CTABr) and gelatin+PAM+CTABr was investigated by cyclic voltammetry as well as cathodic polarization in order to improve the quality of cathodic copper in bio-metallurgical process.The results indicate that the inhibition performances of these additives are dependent on complex and adsorption behaviors as well as the deposit potential.For a solution of acidic copper sulpate containing 40 g/L Cu2+ and 180 g/L H2SO4,the additive (gelatin+HDPBr) is the most efficient among the investigated additives because HDPBr with a large organic cation and π electron can adsorb on the cathodic surface to block the active sites and Br-ion can precipitate Cu2+ to form Cu2Br2.The additive (gelatin+PAM) also has a better inhibition performance,while the additives (gelatin+PEG),(gelatin+PEG+CTABr) and (gelatin+PAM+CTABr) are comparatively lower inhibition performance compared with the additive (gelatin+thiourea) which has been frequently used so far.
文摘Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.
基金grants from the National Natural Science Foundation of China (No.20272010 and 20672022)
文摘The esterifications of 9-（hydroxyimino）-4-methyl-8,9-dihydrofuro[2,3-h]chromen-2-one （4） with acid chlorides afforded normal oxime-esters 3a-e in 35-78% yields in presence of excessive 4-dimethylaminopyridine as the acid scavenger, whereas the reactions gave unexpected 8-substituted products N-（8-chloro-4-methyl-2-oxo-2H-furo-[2,3-h]chromen-9-yl）amides （5a-c） and 4-methyl-2,9-dioxo-8,9-dihydro-2H-furo[2,3-h]chromen-8-ylcarboxyloates （6d-e） by using excessive acid chlorides. The structures of 10 new compounds were determined by 1H NMR, 13C NMR, MS and HRMS, and the possible mechanism for the formation of unexpected products 5a--c and 6d-e was also proposed.
