Relationship between Colored Microstructure under Polarized Light and Shape Recovery Characteristics on the Thermomechanical Cycled CuAlNi Single Crystals

The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.

Polarization characteristics and controllability mechanism of passive scattering elements

Polarization feature is one of the important features of radar targets,which has been used in many fields.In this paper,the grid models of some typical foreign moving targets are constructed on the simulation platform,such as glider,cruiser,fixed wing aircraft,and rotorcraft.The electromagnetic scattering characteristics of the moving platforms under the incidence of circular polarization waves are calculated.The typical polarization characteristics which the orthogonal and in-phase components have in the echoes are analyzed and proved.Based on the polarization scattering matrix(PSM)theory,from the point of view of the physical reproduction,the technical status quo that the existing technical approaches are difficult to realize the passive simulation of polarization characteristic of the target is summarized.To solve this problem,combined with the vector synthesis law,the realization mechanism of controllable polarization characteristic of target echoes is proposed,the analytical expressions of polarization control matrix and polarization ratio are deduced,and the controllability of polarization ratio feature in the case of circular polarization is verified by simulation calculation.

A simulation study of polarization characteristics of ultrathin CsPbBr3 nanowires with different cross-section shapes and sizes

The polarization characteristics of ultrathin CsPbBr3nanowires are investigated. Especially, for the height of crosssection of nanowires between 2 nm and 25 nm, the normalized intensity and polarization ratio ρ of CsPbBr3nanowires with triangular, square and hexagonal cross-section shapes are compared. The results show that, along with the increase of the height of cross-section, the polarization ratios of these three nanowires decrease until T = 15 nm, and increase afterwards.Also, along with the increase of the cross-section area up to 100 nm~2, the polarization ratios of these three nanowires increase too. In general, for the same height or area, the polarization ratio ρ of these nanowires follows ρhexagon> ρsquare>ρtriangle. Therefore, the nanowire with the hexagonal cross-section should be chosen, where for a cross-section height of 2 nm and a length-height ratio of 20 : 1, the maximal polarization ratio is 0.951 at the longitudinal center of the NW. Further,for the hexagonal NW with a cross-section height of 10 nm, the hexagonal NW with a length-height ratio of 45 : 1 exhibits the maximal polarization ratio at the longitudinal center of the NW. These simulation results predict the feasible size and shape of CsPbBr3nanowire devices with high polarization ratios.

Reflection separation technology based on polarization characteristics

Specific to the reflected light problem on the surface of transparent body,the polarization characteristics of the reflection region are analyzed,and a polarization characterization model combining the reflection and transmission effects is established.On the basis of the polarization characteristic analysis,the minimum value of normalized cross-correlation(NCC)coefficient between transmission and reflection images is solved through the gradient descent method,and their polarization degrees under the minimum correlation are acquired.According to the distribution relations of the transmitted and reflected lights in perpendicular and parallel directions,reflection separation is realized via the polarized orthogonality difference algorithm based on the degree of reflection polarization and the degree of transmission polarization.

Linear polarization holography

Polarization holography is a newly researched field,that has gained traction with the development of tensor theory.It primarily focuses on the interaction between polarization waves and photosensitive materials.The extraordinary capabil-ities in modulating the amplitude,phase,and polarization of light have resulted in several new applications,such as holo-graphic storage technology,multichannel polarization multiplexing,vector beams,and optical functional devices.In this paper,fundamental research on polarization holography with linear polarized wave,a component of the theory of polariz-ation holography,has been reviewed.Primarily,the effect of various polarization changes on the linear and nonlinear po-larization characteristics of reconstructed wave under continuous exposure and during holographic recording and recon-struction have been focused upon.The polarization modulation realized using these polarization characteristics exhibits unusual functionalities,rendering polarization holography as an attractive research topic in many fields of applications.This paper aims to provide readers with new insights and broaden the application of polarization holography in more sci-entific and technological research fields.

Polarization Measurement of Auroral Kilometric Radiation by INTERBALL-2 Satellite

Preliminary analyses of low and high resolution data are presented from the polar plasma waves measured on board INTERBALL 2 satellite in three frequency bands: ELF(5 1000 Hz),VLF(1 20 kHz)and LF(20 260 kHz). The propagation and polarization characteristics of the Auroral Kilometric Radiation (AKR) emission are estimated and studied. The obtained result shows that R X and L O modes of AKR emission just above source regions are found. The propagation characteristics are also determined: wave normal directions weakly oblique or quasi parallel to the earth magnetic field direction.

Cavity tuning characteristics of orthogonally polarized dual-frequency He-Ne laser at 1.15 μm

The cavity tuning characteristics of orthogonally polarized dual-frequency HeiNe laser at 1.15 μm are presented. Vectorial-extension model based on semi-classical laser theory reveals that cavity tuning characteristics are related to beat frequency, relative excitation, and type of Ne isotope. Distortions of cavity tuning curves become moderate with the increase of beat frequency because of the weakening of the cross- saturation effect. Distortions are enhanced with the increase of relative excitation because of the combined action of the self-saturation and cross-saturation effects. By adopting dual-isotope Ne instead of monoisotoplie Ne, distortions are reduced because of the misalignment between peaks of the self-saturation and net gain coefficients. The theoretical calculations are in good agreement with the corresponding experimental results.

Polarization and structure dependent optical characteristics of the three-arm nanoantenna with C_(3v) symmetry and broken symmetry

The optical properties of a three-arm plasmonic nanoantenna with and without broken symmetry were analyzed in detail. For the symmetrical structure, the local electric field can be significantly enhanced and well confined within the feed gap, whilst the extinction spectrum illustrates polarization independence. With broken symmetry, multi-wavelength resonances are observed due to the single dipole resonance and dipole–dipole coupling effect, and wide tunability is also available through minor structural adjustment. Especially when illuminated by a circularly polarized light beam, the extinction and the electric field distribution can be effectively modulated by just varying the incident wavelength.

Enhancement of corrosion resistance in sintered Nd-Fe-B permanent magnet doping with different CuZn5 contents

Nd-Fe-B permanent magnets doped with CuZn5 powders were prepared via conventional sintered method. The effects of CuZn5 contents on magnetic properties and corrosion resistance of the magnets were sys- tematically studied. It shows that the remanence, coercivity, and maximum energy product decrease gradually with the increase in CuZn5 doping content. The magnet＇s corrosion kinetics in autoclaves environment and its electrochemical properties in electrolytes were also examined. It is interesting to see that the weight loss of 3.5 wt% and 4.5 wt% CuZn5 powders doping magnets is only 1 and 0 mg.cm^-2 after autoclaves test at 121 ℃, 2 × 10^5 Pa for 500 h, respectively, which is much lower than that of the magnets without CuZn5 doping. Electrochemical results show that the CuZn5 powders doping magnets display more positive corrosion potential （Eoorr） and lower corrosion current density （Icorr） than those of the original magnets without CuZn5 doping in sulphuric acid electrolyte and distilled water. It is, therefore, concluded that doping CuZn5 powders is a promising way to enhance the corrosion resistance of sintered Nd-Fe-B magnets.