Optical and electrical anisotropy regulation engineering of low-dimensional materials toward polarized detection and imaging applications

Polarized-sensitive image sensors are a kind of photodetector with great development potential due to their enhanced ability to detect and identify the target objects from the aspect of spatial,spectral and polarized information.Recently,low-dimensional anisotropic materials with inherent anisotropic properties,ultrathin thickness,tunable bandgap and feasible integration with complementary metal oxide semiconductor(CMOS)fabrication processes have attracted great interest for their facilitation of polarized photodetector devices miniaturization.Maximizing the polarized detection performance of low-dimensional materials to satisfy realistic needs stimulates the exploration of modulation of anisotropic properties.In this review,we comprehensively introduce the latest research progress in modulating the optical and optoelectronic anisotropy characteristics of low-dimensional materials.The strategy of anisotropy regulation through crystal structure engineering and coupling system is discussed emphatically.Then,the latest progress in image recognition applications using anisotropic low-dimensional materials is reviewed in detail.Finally,we summarize the challenge and propose future opportunities in the practical application of polarized-sensitive imaging photodetectors based on low-dimensional anisotropic materials.

Infrared Fault Detection Method for Dense Electrolytic Bath Polar Plate Based on YOLOv5s

Electrolysis tanks are used to smeltmetals based on electrochemical principles,and the short-circuiting of the pole plates in the tanks in the production process will lead to high temperatures,thus affecting normal production.Aiming at the problems of time-consuming and poor accuracy of existing infrared methods for high-temperature detection of dense pole plates in electrolysis tanks,an infrared dense pole plate anomalous target detection network YOLOv5-RMF based on You Only Look Once version 5(YOLOv5)is proposed.Firstly,we modified the Real-Time Enhanced Super-Resolution Generative Adversarial Network(Real-ESRGAN)by changing the U-shaped network(U-Net)to Attention U-Net,to preprocess the images;secondly,we propose a new Focus module that introduces the Marr operator,which can provide more boundary information for the network;again,because Complete Intersection over Union(CIOU)cannot accommodate target borders that are increasing and decreasing,replace CIOU with Extended Intersection over Union(EIOU),while the loss function is changed to Focal and Efficient IOU(Focal-EIOU)due to the different difficulty of sample detection.On the homemade dataset,the precision of our method is 94%,the recall is 70.8%,and the map@.5 is 83.6%,which is an improvement of 1.3%in precision,9.7%in recall,and 7%in map@.5 over the original network.The algorithm can meet the needs of electrolysis tank pole plate abnormal temperature detection,which can lay a technical foundation for improving production efficiency and reducing production waste.

Analysis and inversion of target polarization characteristics based on pBRDF

Imaging detection is an important means to obtain target information.The traditional imaging detection technology mainly collects the intensity information and spectral information of the target to realize the classification of the target.In practical applications,due to the mixed scenario,it is difficult to meet the needs of target recognition.Compared with intensity detection,the method of polarization detection can effectively enhance the accuracy of ground object target recognition(such as the camouflage target).In this paper,the reflection mechanism of the target surface is studied from the microscopic point of view,and the polarization characteristic model is established to express the relationship between the polarization state of the reflected signal and the target surface parameters.The polarization characteristic test experiment is carried out,and the target surface parameters are retrieved using the experimental data.The results show that the degree of polarization(DOP)is closely related to the detection zenith angle and azimuth angle.The(DOP)of the target is the smallest in the direction of light source incidence and the largest in the direction of specular reflection.Different materials have different polarization characteristics.By comparing their DOP,target classification can be achieved.

An improved initial rotor position estimation method using high-frequency pulsating voltage injection for PMSM

High frequency pulsating voltage injection method is a good candidate for detecting the initial rotor position of permanent magnet synchronous motor.However,traditional methods require a large number of filters,which leads to the deterioration of system stability and dynamic performance.In order to solve these problems,a new signal demodulation method is proposed in this paper.The proposed new method can directly obtain the amplitude of high-frequency current,thus eliminating the use of filters,improving system stability and dynamic performance and saving the work of adjusting filter parameters.In addition,a new magnetic polarity detection method is proposed,which is robust to current measurement noise.Finally,experiments verify the effectiveness of the method.

The Development of A Fluorescence Polarization Immunoassay for Aflatoxin Detection

A fluorescence polarization immunoassay （FPIA） was developed for the analysis ofaflatoxins （AFs） using an anti-aflatoxin B1 （AFB1） monoclonal antibody and a novel fluorescein-labeled AFB1 tracer. The FPIA showed an IC50 value of 23.33 ng/mL with a limit of detection of 13.12 ng/mL for AFB1. The cross-reactivities of AFB1, AFB2, AFG1, AFG2, AFM1, and AFM2 with the antibody were 100%, 65.7%, 143%, 23.5%, 111.4%, and 2%, respectively. The group-specificity of anti-AFB1mAb indicated that the FPIA could potentially be used in a screening method for the detection of total AFs, albeit not AFG2 and AFM2. The total time required for analyzing 96 samples in one microplate was less than 5 rain. This study demonstrates the potential usefulness of the FPIA as a rapid and simple technique for monitoring AFs.

Research on polarization of oil spill and detection

The SAR（Synthetic Aperture Radar） has the capabilities for all-weather day and night use. In the case of determining the effects of oil spill dumping, the oil spills areas are shown as dark spots in the SAR images.Therefore, using SAR data to detect oil spills is becoming progressively popular in operational monitoring, which is useful for oceanic environmental protection and hazard reduction. Research has been conducted on the polarization decomposition and scattering characteristics of oil spills from a scattering matrix using allpolarization of the SAR data, calculation of the polarization parameters, and utilization of the CPD（Co-polarized Phase Difference） of the oil and the sea, in order to extract the oil spill information. This method proves to be effective by combining polarization parameters with the characteristics of oil spill. The results show that when using Bragg, the oil spill backscattering machine with Enopy and a mean scatter α parameter. The oil spill can be successfully identified. However, the parameter mechanism of the oil spill remains unclear. The use of CPD can easily extract oil spill information from the ocean, and the polarization research provides a base for oil spill remote sensing detection.

Current Polarity Detection and Current Compensation Strategy for PAC Based Three-Phase ZVS PWM Converter

A novel software implementation for current polarity detection and current compensation is presented. For a three-phase zero-voltage soft-switching （ZVS） PWM converter based on phase and amplitude control （PAC）, when saw-tooth carriers with alternate positive and negative slopes are adopted, the positive or negative slopes are chosen according to the phase current polarity. Since polarity reversal causes current distortion, current at the instant of reversal should be compensated for. Based on the characteristic of unity power factor converter in rectification and regeneration modes, a software implementation for current polarity detection is proposed. Distortion of current zero-crossing caused by using saw-tooth carriers with alternate positive and negative slopes is analyzed, and the relevant compensation method is proposed. Experimental study with a 1.5 kW device shows that phase current has a small harmonic content and power factor is high both in rectification and regeneration modes.

Detecting Spin Bias with Circularly Polarized Light

We theoretically study the spin transport through a two-terminal quantum dot device under the influence of a symmetric spin bias and circularly polarized light. It is found that the combination of the circularly polarized light and the applied spin bias can result in a net charge current. The resultant charge current is large enough to be measured when properly choosing the system parameters. The resultant charge current can be used to deduce the spin bias due to the fact that there exists a simple linear relation between them. When the external circuit is open, a charge bias instead of a charge current can be induced, which is also measurable by present technologies. These findings indicate a new approach to detect the spin bias by using circularly polarized light.

Polarization properties in a prism laser gyro with mechanical dither bias

Theoretical analysis and experimental research on the polarization properties of output light in gyro are carried out to investigate the phenomenon that the amplitude of an output voltage signal is modulated by dither bias in laser gyros consisting of totally reflecting prisms. Taking the effect of prism stress birefringence into account, an analytical formula of the output light intensity in the gyro and the relationship between the polarization parameter and the amplitude modulation of the output signal are obtained and discussed. For the first time, the polarized power value of the output light is adopted as a basis to estimate the output signal amplitude fading extent of laser gyros. Experimental results demonstrate that when the value of polarized power of output light is below 25.5% of that in ideal static case, the standard error is over 0.0337 dBm, and the displacement extent of the prism is higher than 53% of the radius of the beam waist in the gyro cavity, the amplitude modulation extent of gyro output signal can reach up to 16%, which badly influences the measurement accuracy of the laser gyro. Using this polarized power detecting measurement method can repair the gyro immediately during its fabrication process, improve the testing and production efficiency and shorten the product development cycle.

Introduction to the detection technology of Ali CMB polarization telescope

Background Ali CMB polarization telescope(AliCPT)project is a well-timed and well-planned ground-based CMB project in Ali(Nagri)area of Tibet,China.It has been approved at the end of 2016.Aims To give an introduction to the detection technology of AliCPT.Method The whole receiver of AliCPT is introduced and discussed,including the optics,the cryostat,the preliminary design of focal plane TES bolometers,multiplexing SQUID readout,and so on.Conclusions The raw sensitivity ofr will reach below 0.001 by 10-year observation as AliCPT project being carried out and upgraded.